Hello Guest User, You are visiting this website from a computer with an IP address of 172.69.58.42 with the name of '?' since Tue Apr 16, 2024 at 1:56:41 PM PT for approx. 0 minutes now.
SDLRC - Scientific Articles all years by Author - K-Kg
The Sheahan Diamond Literature Reference Compilation
The Sheahan Diamond Literature Reference Compilation is compiled by Patricia Sheahan who publishes on a monthly basis a list of new scientific articles related to diamonds as well as media coverage and corporate announcementscalled the Sheahan Diamond Literature Service that is distributed as a free pdf to a list of followers. Pat has kindly agreed to allow her work to be made available as an online digital resource at Kaiser Research Online so that a broader community interested in diamonds and related geology can benefit. The references are for personal use information purposes only; when available a link is provided to an online location where the full article can be accessed or purchased directly. Reproduction of this compilation in part or in whole without permission from the Sheahan Diamond Literature Service is strictly prohibited. Return to Diamond Resource Center
Sheahan Diamond Literature Reference Compilation - Scientific Articles by Author for all years
The SDLRC provides 3 types of references identified in the reference code. DS for scientific article, DM for a media article, and DC for a corporate announcement. Consider DS0512-0001. The DS stands for "diamond scientific". 05 stands for 2005, the year the reference was posted. 12 represents the month the reference was posted. For all years prior to 2015 the default month is 12. -0001 is the reference's identifier and it does not mean anything. The number below the refence code, ie 2015, is the year the article was published. Note that the posted year may sometimes be later than the published year.
Sort Order
References are sorted by the "author" name and when the reference was posted to the compilation.
Most Recent
If the reference code is highlighted yellow, the reference was made available through the most recent monthly compilation of new literature. Use this to check out new references. When new references are posted, we make it our priority to track down an online link and obtain an abstract. With regard to older references, tracking down an abstract and an online link is a work in progress.
Link to external location of article:
If the title has a link, it means we have found a location online where you can either retrieve the full article free, or purchase access to it. The Sheahan Diamond Literature Service is not a technical article procurement service; if you want a restricted article, you must deal directly with the vendor who controls the copyright to the article.
Searching this page for a specific term or author
In your Firefox browser click Edit in the menu bar and then Find. In the Find box that shows up at the bottom of the web page enter your search term. Firefox will highlight all occurrences. This is particularly helpful when the author you are seeking was not the lead author by whom the compilation is sorted.
Sending or sharing a reference
The left column (Posted/Published) has an embedded hyperlink for each reference. In Firefox, if you right click on it, you can obtain the link url for that reference's location within the page, which you can copy and paste into an email or any other document. You can also use the "share this link" option to tweet, facebook etc the link.
Physics of the Earth and Planetary Interiors, in press available, 51p. Pdf
United States, Canada
geophysics - seismics
Abstract: We examined SKS-SKKS splitting intensity discrepancies for phases that sample the lowermost mantle beneath North America, which has previously been shown to exhibit seismic anisotropy using other analysis techniques. We examined data from 25 long-running seismic stations, along with 244 stations of the temporary USArray Transportable Array, located in the eastern, southeastern and western U.S. We identified 279 high-quality SKS-SKKS wave pairs that yielded well-constrained splitting intensity measurements for both phases. Of the 279 pairs, a relatively small number (15) exhibited discrepancies in splitting intensity of 0.4 s or greater, suggesting a contribution to the splitting of one or both phases from anisotropy in the lowermost mantle. Because only a small minority of SK(K)S phases examined in this study show evidence of being affected by lowermost mantle anisotropy, the traditional interpretation that splitting of these phases primarily reflects anisotropy in the upper mantle directly beneath the stations is appropriate. The discrepant pairs exhibited a striking geographic trend, sampling the lowermost mantle beneath the southern U.S. and northern Mexico, while other regions were dominated by non-discrepant pairs. We carried out ray theoretical modeling of simple anisotropy scenarios that have previously been suggested for the lowermost mantle beneath North America, invoking the alignment of post-perovskite due to flow induced by the impingement of the remnant Farallon slab on the core-mantle boundary. We found that our measurements are generally consistent with this model and with the idea of slab-driven flow, but relatively small-scale lateral variations in the strength and/or geometry of lowermost mantle anisotropy beneath North America are also likely present.
Physics of the Earth and Planetary Interiors, Vol. 315, 106708, 13p. Pdf
India
kimberlites
Abstract: Complex geological structures and processes that took place in the Dharwar craton formation make it difficult to understand the evolution history. 3-D magnetotelluric inversion is a challenging task for the imaging of sub-surface structures. Data at 40 stations in a gridded fashion are used in this study for inversion. A controversy exists regarding the subduction polarity between the eastern and western Dharwar craton. Based on the conductivity anomalies mapped in the sub-surface, the lithosphere can be divided into the shallower and deeper lithosphere. The study delineated several crustal and lithospheric upper mantle conductors. In the crustal region, several conductive features (~10 ?-m) are imaged in the western part, central, and eastern part of the profile. A new finding of this 3-D study is a conductor in the eastern Dharwar craton in the depth range of 65-140 km. The base of this conductor shows the graphite diamond stability field and is correlated with the kimberlites/lamproites present in the region. An uppermost mantle conductor is present at the depth range of 80-200 km in the central part of the study area. Sulphides and carbon-rich fluids could be one cause of the conductors mapped in the crust. The low electrical resistivity imaged in the deeper lithosphere could be due to the refertilization of the mantle scar in the Cretaceous age by the passage of several hotspots. The lithospheric thickness estimated beneath the Dharwar craton in this study is more than 200 km. This study reveals geophysical evidence for the eastward subduction polarity in the Dharwar craton.
Abstract: In the Arabian-Northern African region, interaction of the Nubian, Arabian and Eurasian plates and many small tectonic units is conspicuous. In order to better understand this interaction, we use satellite derived gravity data (retracked to the Earth’s surface) recognized now as a powerful tool for tectono-geodynamic zonation. We applied the polynomial approximation to the gravity data which indicated the presence of a large, deep ring structure in the eastern Mediterranean centered below the Island of Cyprus. Quantitative analysis of residual gravity anomaly provides an estimate of the deep anomalous body’s upper edge at a depth of about 1700 km. Computations of the residual gravity anomalies for the lower mantle also indicate presence of anomalous sources. The GPS vector pattern coinciding with the gravity trend implies counter clockwise rotation of this structure. Independent analyses of the geoid isolines map and seismic tomography data support the existence of a deep anomaly. Paleomagnetic data analysis from the surrounding regions confirms a counter clockwise rotation. Numerous petrological, mineralogical, geodynamical and tectonic data suggest a relation between this deep structure and near-surface processes. This anomaly sheds light on a number of phenomena including the Cyprus gravity anomaly, counter clockwise rotation of the Mesozoic terrane belt and asymmetry of basins along continental transform faults.
Density, temperature and composition of the North American lithosphere - new insights from a joint analysis of seismic, gravity and mineral physics data: 1. density structure of the crust and upper mantle.
Geochemistry, Geophysics, Geosystems: G3, Vol. 15, 12, pp. 4781-4807.
Abstract: Stable continental cratons are the oldest geologic features on the planet. They have survived 3.8 to 2.5 billion years of Earth’s evolution1, 2. The key to the preservation of cratons lies in their strong and thick lithospheric roots, which are neutrally or positively buoyant with respect to surrounding mantle3, 4. Most of these Archaean-aged cratonic roots are thought to have remained stable since their formation and to be too viscous to be affected by mantle convection2, 3, 5. Here we use a combination of gravity, topography, crustal structure and seismic tomography data to show that the deepest part of the craton root beneath the North American Superior Province has shifted about 850?km to the west-southwest relative to the centre of the craton. We use numerical model simulations to show that this shift could have been caused by basal drag induced by mantle flow, implying that mantle flow can alter craton structure. Our observations contradict the conventional view of cratons as static, non-evolving geologic features. We conclude that there could be significant interaction between deep continental roots and the convecting mantle.
Abstract: The tectonic-geodynamic characteristics of the North African-Arabian region are complicated by interaction of numerous factors. To study this interaction, we primarily used the satellite gravity data (retracked to the Earth's surface), recognized as a powerful tool for tectonic-geodynamic zonation. The applied polynomial averaging of gravity data indicated the presence of a giant, deep quasi-ring structure in the Eastern Mediterranean, the center of which is located under the Island of Cyprus. Simultaneously, the geometrical center of the revealed structure coincides with the Earth's critical latitude of 35?. A quantitative analysis of the obtained gravitational anomaly made it possible to estimate the depth of the upper edge of the anomalous body as 1650?1700 km. The GPS vector map coinciding with the gravitational trend indicates counterclockwise rotation of this structure. Review of paleomagnetic data on the projection of the discovered structure into the earth's surface also confirms its counterclockwise rotation. The analysis of the geoid anomalies map and seismic tomography data commonly approve presence of this deep anomaly. The structural and geodynamic characteristics of the region and paleobiogeographic data are consistent with the proposed physical-geological model. Comprehensive analysis of petrological, mineralogical, and tectonic data suggests a relationship between the discovered deep structure and near-surface processes. The revealed geological deep structure sheds light on specific anomalous effects in the upper crustal layer, including the high-intensity Cyprus gravity anomaly, counterclockwise rotation of the Mesozoic terrane belt, configuration of the Sinai plate, and the asymmetry of sedimentary basins along the continental faults.
Abstract: The tectonic-geodynamic characteristics of the North African-Arabian region are complicated by interaction of numerous factors. To study this interaction, we primarily used the satellite gravity data (retracked to the Earth's surface), recognized as a powerful tool for tectonic-geodynamic zonation. The applied polynomial averaging of gravity data indicated the presence of a giant, deep quasi-ring structure in the Eastern Mediterranean, the center of which is located under the Island of Cyprus. Simultaneously, the geometrical center of the revealed structure coincides with the Earth's critical latitude of 35?. A quantitative analysis of the obtained gravitational anomaly made it possible to estimate the depth of the upper edge of the anomalous body as 1650?1700 km. The GPS vector map coinciding with the gravitational trend indicates counterclockwise rotation of this structure. Review of paleomagnetic data on the projection of the discovered structure into the earth's surface also confirms its counterclockwise rotation. The analysis of the geoid anomalies map and seismic tomography data commonly approve presence of this deep anomaly. The structural and geodynamic characteristics of the region and paleobiogeographic data are consistent with the proposed physical-geological model. Comprehensive analysis of petrological, mineralogical, and tectonic data suggests a relationship between the discovered deep structure and near-surface processes. The revealed geological deep structure sheds light on specific anomalous effects in the upper crustal layer, including the high-intensity Cyprus gravity anomaly, counterclockwise rotation of the Mesozoic terrane belt, configuration of the Sinai plate, and the asymmetry of sedimentary basins along the continental faults.
Abstract: The lithosphere and upper mantle of South America is investigated using multiple data sets, including the topography, crustal structure, regional seismic tomography, gravity, and mineral physics. These data are jointly inverted to estimate variations in temperature, density and composition in the lithospheric and sub-lithospheric upper mantle to a depth of 325 km. Our results show significant variations in lithospheric properties, including thick, depleted roots beneath large parts of the Amazon, São Francisco, and Paranapanema Cratons. However, portions of some cratons, such as the western Guyana Shield, lack a depleted root. We hypothesize that these regions either never developed a depleted root, or that the root was rejuvenated by lithospheric processes.
Aspects of the Geochemistry of Kimberlites from the Premier mine and Other Selected South African Occurrences with Particular Reference to the Rare Earth Elements.
Physics and Chemistry of the Earth., Vol. 9, PP. 687-707.
Materials Characterization, Vol. 142, pp. 154-161.
Global
synthetics
Abstract: Crystal defects are abundant in synthetic diamond produced by chemical vapor deposition (CVD). We present the first images of crystal defects in a bulk polycrystalline CVD diamond sample using general electron channeling contrast imaging (ECCI) in a field emission scanning electron microscope (FE-SEM). For enhancement of channeling contrast of this material, we introduce a novel protocol for diamond surface preparation that involves acid etching. Using this protocol, we imaged three types of crystal defects including twins, stacking faults and dislocations. Each defect was identified based on its appearance in electron channeling contrast (ECC) micrographs. We analyzed grains containing twins and dislocations using electron backscatter diffraction (EBSD) crystal orientation mapping. We found a large population of grains that contained ?3 type twins on {111} planes with a 60°?111? angle-axis pair of misorientation for twin boundaries. In addition, we identified {111} stacking faults and {111} helical dislocations. These observations are in agreement with reports of crystal defects in CVD diamond thin foils studied by a transmission electron microscope (TEM).
Abstract: Oceanic lithospheric mantle is generally interpreted as depleted mantle residue after mid-ocean ridge basalt extraction. Several models have suggested that metasomatic processes can refertilize portions of the lithospheric mantle before subduction. Here, we report mantle xenocrysts and xenoliths in petit-spot lavas that provide direct evidence that the lower oceanic lithosphere is affected by metasomatic processes. We find a chemical similarity between clinopyroxene observed in petit-spot mantle xenoliths and clinopyroxene from melt-metasomatized garnet or spinel peridotites, which are sampled by kimberlites and intracontinental basalts respectively. We suggest that extensional stresses in oceanic lithosphere, such as plate bending in front of subduction zones, allow low-degree melts from the seismic low-velocity zone to percolate, interact and weaken the oceanic lithospheric mantle. Thus, metasomatism is not limited to mantle upwelling zones such as mid-ocean ridges or mantle plumes, but could be initiated by tectonic processes. Since plate flexure is a global mechanism in subduction zones, a significant portion of oceanic lithospheric mantle is likely to be metasomatized. Recycling of metasomatic domains into the convecting mantle is fundamental to understanding the generation of small-scale mantle isotopic and volatile heterogeneities sampled by oceanic island and mid-ocean ridge basalts.
Abstract: It is now accepted that significant volumes of pyroxenites are generated in the subduction factory and remain trapped in the mantle. In ophiolites and orogenic massifs the geometry of pyroxenite layers and their relationships with the host peridotite can be observed directly. Since a large part of what is known about the upper mantle structure is derived from the analysis of seismic waves, it is crucial to integrate pyroxenites in the interpretations. We modeled the seismic properties of a peridotitic mantle rich in pyroxenite layers in order to determine the impact of layering on the seimsic properties. To do so, EBSD data on deformed and undeformed pyroxenites from the Cabo Ortegal complex (Spain) and the Trinity ophiolite (California, USA) respectively are combined with either A or B-type olivine fabrics in order to model a realistic pyroxenite-rich upper mantle. Consideration of pyroxeniterich domains within the host mantle wall rock is incorporated in the calculations using the Schoenberg and Muir group theory [1]. This quantification reveals the complex dependence of the seismic signal on the deformational state and relative abundance of each mineral phase. The incorporation of pyroxenites properties into geophysical interpretations in understanding the lithospheric structure of subduction zones will lead to more geologically realistic models.
GPS constraints on continental deformation in the Africa Arabia Eurasia continental collision zone and implications for the dynamics of plate interactions.
Journal of Geophysical Research, Vol. 111,B5 B05411.
Abstract: Crystalline basement rocks of southwestern Montana have been subjected to multiple tectonothermal events since ?3.3 Ga: the Paleoproterozoic Big Sky/Great Falls orogeny, Mesoproterozoic extension associated with Belt-Purcell basin formation, Neoproterozoic extension related to Rodinia rifting, and the late Phanerozoic Sevier-Laramide orogeny. We investigated the long-term (>1 Ga), low-temperature (erosion/burial within 10 km of the surface) thermal histories of these tectonic events with zircon and apatite (U-Th)/He thermochronology. Data were collected across nine sample localities (n = 55 zircon and n = 26 apatite aliquots) in the northern and southern Madison ranges, the Blacktail-Snowcrest arch, and the Tobacco Root uplift. Our zircon (U-Th)/He data show negative trends between single aliquot date and effective uranium (a radiation damage proxy), which we interpreted with a thermal history model that considers the damage-He diffusivity relationship in zircon. Our model results for these basement ranges show substantial cooling from temperatures above 400°C to near surface conditions between 800 and 510 Ma. Subsequent Phanerozoic exhumation culminated by ?75 Ma. Late Phanerozoic cooling is coincident with along-strike Sevier belt thin-skinned thrusting in southeastern Idaho, and older than exhumation in basement-involved uplifts of the Wyoming Laramide province. Our long-term, low-temperature thermal record for these southwestern Montana basement ranges shows that: (a) these basement blocks have experienced multiple episodes of upper crustal exhumation and burial since Archean time, possibly influencing Phanerozoic thrust architecture and (b) the late Phanerozoic thick-skinned thrusting recorded by these rocks is among the earliest thermochronologic records of Laramide basement-involved shortening and was concomitant with Sevier belt thin-skinned thrusting.
Earth and Planetary Science Letters, Vol. 456, pp. 134-145.
Mantle
Bridgemanite
Abstract: The lower mantle is estimated to be composed of mostly bridgmanite and a smaller percentage of ferropericlase, yet very little information exists for two-phase deformation of these minerals. To better understand the rheology and active deformation mechanisms of these lower mantle minerals, especially dislocation slip and the development of crystallographic preferred orientation (CPO), we deformed mineral analogs neighborite (NaMgF3, iso-structural with bridgmanite) and halite (NaCl, iso-structural with ferropericlase) together in the deformation-DIA at the Advanced Photon Source up to 51% axial shortening. Development of CPO was recorded in situ with X-ray diffraction, and information on microstructural evolution was collected using X-ray microtomography. Results show that when present in as little as 15% volume, the weak phase (NaCl) controls the deformation. Compared to single phase NaMgF3 samples, samples with just 15% volume NaCl show a reduction of CPO in NaMgF3 and weakening of the aggregate. Microtomography shows both NaMgF3 and NaCl form highly interconnected networks of grains. Polycrystal plasticity simulations were carried out to gain insight into slip activity, CPO evolution, and strain and stress partitioning between phases for different synthetic two-phase microstructures. The results suggest that ferropericlase may control deformation in the lower mantle and reduce CPO in bridgmanite, which implies a less viscous lower mantle and helps to explain why the lower mantle is fairly isotropic.
Kaeser, B., Olker, B., Kait, A., Altherr, R., Pettke, T.
Pyroxenite xenoliths from Marsabit ( northern Kenya): evidence for different magmatic events in the lithospheric mantle and interaction between peridotite
Contributions to Mineralogy and Petrology, Vol. 157, 4, pp. 453-472.
Development of a Built in scanning near field microscope head for an atomic force microscope system and its application to natural polycrystalline diamonds
International Mineralogical Association 19th. General Meeting, held Kobe, Japan July 23-28 2006, Abstract p. 114.
Zedgenizov, D.A., Kagi, H., Shatsky, V.S., Ragozin, A.
Local variations of carbon isotope composition in diamonds from Sao-Luis ( Brazil): evidence for heterogenous carbon reservoir in sublithospheric mantle.
The deep carbon cycle: new evidence from superdeep diamonds.
V.S. Sobolev Institute of Geology and Mineralogy Siberian Branch Russian Academy of Sciences International Symposium Advances in high pressure research: breaking scales and horizons ( Courtesy of N. Poikilenko), Held Sept. 22-26, 2p. Abstract
Physics and Chemistry of Minerals, In press available 16p.
South America, Brazil, Mato Grosso
Deposit - Juina area
Abstract: Photoluminescence (PL) spectroscopy and electron paramagnetic resonance (EPR) were used for the first time to characterize properties of superdeep diamonds from the São-Luis alluvial deposits (Brazil). The infrared measurements showed the low nitrogen content (>50 of 87 diamonds from this locality were nitrogen free and belonged to type IIa) and simultaneously the extremely high level of nitrogen aggregation (pure type IaB being predominant), which indicates that diamonds under study might have formed under high pressure and temperature conditions. In most cases, PL features excited at various wavelengths (313, 473, and 532 nm) were indicative of different growth and post-growth processes during which PL centers could be formed via interaction between vacancies and nitrogen atoms. The overall presence of the 490.7 nm, H3, and H4 centers in the luminescence spectra attests to strong plastic deformations in these diamonds. The neutral vacancy known as the GR1 center has probably occurred in a number of crystals due to radiation damage in the post-growth period. The 558.5 nm PL center is found to be one of the most common defects in type IIa samples which is accompanied by the EPR center with g-factor of 2.00285. The 536 and 576 nm vibronic systems totally dominated the PL spectra of superdeep diamonds, while none of "normal" diamonds from the Mir pipe (Yakutia) with similar nitrogen characteristics showed the latter three PL centers.
Physics and chemistry of Minerals, Vol. 42, 9, pp. 707-722.
South America, Brazil
Sao-Luis alluvials
Abstract: Photoluminescence (PL) spectroscopy and electron paramagnetic resonance (EPR) were used for the first time to characterize properties of superdeep diamonds from the São-Luis alluvial deposits (Brazil). The infrared measurements showed the low nitrogen content (>50 of 87 diamonds from this locality were nitrogen free and belonged to type IIa) and simultaneously the extremely high level of nitrogen aggregation (pure type IaB being predominant), which indicates that diamonds under study might have formed under high pressure and temperature conditions. In most cases, PL features excited at various wavelengths (313, 473, and 532 nm) were indicative of different growth and post-growth processes during which PL centers could be formed via interaction between vacancies and nitrogen atoms. The overall presence of the 490.7 nm, H3, and H4 centers in the luminescence spectra attests to strong plastic deformations in these diamonds. The neutral vacancy known as the GR1 center has probably occurred in a number of crystals due to radiation damage in the post-growth period. The 558.5 nm PL center is found to be one of the most common defects in type IIa samples which is accompanied by the EPR center with g-factor of 2.00285. The 536 and 576 nm vibronic systems totally dominated the PL spectra of superdeep diamonds, while none of "normal" diamonds from the Mir pipe (Yakutia) with similar nitrogen characteristics showed the latter three PL centers.
Physics and Chemistry of Minerals, Vol. 42, 9, pp. 707-722.
South America, Brazil
Deposit - Sao-Luis
Abstract: Photoluminescence (PL) spectroscopy and electron paramagnetic resonance (EPR) were used for the first time to characterize properties of superdeep diamonds from the São-Luis alluvial deposits (Brazil). The infrared measurements showed the low nitrogen content (>50 of 87 diamonds from this locality were nitrogen free and belonged to type IIa) and simultaneously the extremely high level of nitrogen aggregation (pure type IaB being predominant), which indicates that diamonds under study might have formed under high pressure and temperature conditions. In most cases, PL features excited at various wavelengths (313, 473, and 532 nm) were indicative of different growth and post-growth processes during which PL centers could be formed via interaction between vacancies and nitrogen atoms. The overall presence of the 490.7 nm, H3, and H4 centers in the luminescence spectra attests to strong plastic deformations in these diamonds. The neutral vacancy known as the GR1 center has probably occurred in a number of crystals due to radiation damage in the post-growth period. The 558.5 nm PL center is found to be one of the most common defects in type IIa samples which is accompanied by the EPR center with g-factor of 2.00285. The 536 and 576 nm vibronic systems totally dominated the PL spectra of superdeep diamonds, while none of “normal” diamonds from the Mir pipe (Yakutia) with similar nitrogen characteristics showed the latter three PL centers.
Geochemistry International, Vol. 54, 10, pp. 834-838.
South America, Brazil
Deposit - Sao Luiz
Abstract: We report cloudy micro- and nano-inclusions in a superdeep diamond from São-Luiz, Brazil which contains inclusions of ferropericlase (Mg, Fe)O and former bridgmanite (Mg, Fe)SiO3 and ringwoodite (Mg, Fe)2SiO4. Field emission-SEM and TEM observations showed that the cloudy inclusions were composed of euhedral micro-inclusions with grain sizes ranging from tens nanometers to submicrometers. Infrared absorption spectra of the cloudy inclusions showed that water, carbonate, and silicates were not major components of these micro- and nano-inclusions and suggested that the main constituent of the inclusions was infrared-inactive. Some inclusions were suggested to contain material with lower atomic numbers than that of carbon. Mineral phase of nano- and micro-inclusions is unclear at present. Microbeam X-ray fluorescence analysis clarified that the micro-inclusions contained transition metals (Cr, Mn, Fe, Co, Ni, Cu, Zn) possibly as metallic or sulfide phases. The cloudy inclusions provide an important information on the growth environment of superdeep diamonds in the transition zone or the lower mantle.
Abstract: Nitrogen occupies about 80% of the Earth 's atmosphere and had an impact on the climate in the early Earth. However, the behavior of nitrogen especially in the deep Earth is still unclear. Nitrogen is depleted compared to other volatile elements in deep mantle (Marty et al., 2012). "Missing" nitrogen is an important subject in earth science. In this study, we compared nitrogen incorporation into lower-mantle minerals (bridgmanite, periclase and stishovite) from high-temperature high-pressure experiment using multianvil apparatus installed at Geodynamics Research Center, Ehime University under the conditions of 27 GPa and 1600°C-1900°C. In these experiments, we used Fe-FeO buffer in order to reproduce the redox state of the lower mantle. Two types of starting materials: a powder mixture of SiO2 and MgO and a powder mixture of SiO2, MgO, Al2O3 and Mg(OH)2 were used for starting materials. Nitrogen in recovered samples was analyzed using NanoSIMS installed at Atmosphere and Ocean Research Institute. A series of experimental results revealed that stishovite and periclase can incorporate more nitrogen than bridgmanite. This suggests that periclase, the major mineral in the lower mantle, may be a nitrogen reservoir. Furthermore, the results suggest that stishovite, which is formed by the transition of the SiO2-rich oceanic crustal sedimentary rocks transported to the lower mantle via subducting slabs, can incorporate more nitrogen than bridgmanite (20 ppm nitrogen solubility reported by Yoshioka et al. (2018)). Our study suggests that nitrogen would continue to be supplied to the lower mantle via subducting slabs since approximate 4 billion years ago when the plate tectonics had begun, forming a "Hidden" nitrogen reservoir in the lower mantle.
Abstract: The enigmatic appearance of cuboctahedral diamonds in ophiolitic and arc volcanic rocks with morphology and infrared characteristics similar to synthetic diamonds that were grown from metal solvent requires a critical reappraisal. We have studied 15 diamond crystals and fragments from Tolbachik volcano lava flows, using Fourier transform infrared spectrometry (FTIR), transmission electron microscopy (TEM), synchrotron X-ray fluorescence (SRXRF) and laser ablation inductively coupled plasma mass-spectrometry (LA-ICP-MS). FTIR spectra of Tolbachik diamonds correspond to typical type Ib patterns of synthetic diamonds. In TEM films prepared using focused ion beam technique, we find Mn-Ni and Mn-Si inclusions in Tolbachik diamonds. SRXRF spectra indicate the presence of Fe-Ni and Fe-Ni-Mn inclusions with Cr, Ti, Cu, and Zn impurities. LA-ICP-MS data show variable but significantly elevated concentrations of Mn, Fe, Ni, and Cu reaching up to 70?ppm. These transition metal concentration levels are comparable with those determined by LA-ICP-MS for similar diamonds from Tibetan ophiolites. Mn-Ni (+Fe) solvent was widely used to produce industrial synthetic diamonds in the former USSR and Russia with very similar proportions of these metals. Hence, it appears highly probable that the cuboctahedral diamonds recovered from Kamchatka arc volcanic rocks represent contamination and are likely derived from drilling tools or other hard instruments. Kinetic data on diamond dissolution in basaltic magma or in fluid phase demonstrate that diamond does not form under the pressures and temperature conditions prevalent within the magmatic system beneath the modern-day Klyuchevskoy group of arc volcanoes. We also considered reference data for inclusions in ophiolitic diamonds and compared them with the composition of solvent used in industrial diamond synthesis in China. The similar inclusion chemistry close to Ni70Mn25Co5 for ophiolitic and synthetic Chinese diamonds scrutinized here suggests that most diamonds recovered from Tibetan and other ophiolites are not natural but instead have a synthetic origin. In order to mitigate further dubious reports of diamonds from unconventional tectonic settings and source rocks, we propose a set of discrimination criteria to better distinguish natural cuboctahedral diamonds from those produced synthetically in industrial environments and found as contaminants in mantle- and crust-derived rocks.
Abstract: Bridgmanite (Mg,Fe)SiO3, a high pressure silicate with a perovskite structure, is dominant material in the Lower Mantle and therefore is probably the most abundant mineral in the Earth. One single-phase and two composite inclusions of (Mg,Fe)SiO3 coexisting with jeffbenite ((Mg,Fe)3Al2Si3O12), and with jeffbenite and olivine ((Mg,Fe)2SiO4) have been analyzed to identify retrograde phases of former bridgmanite in diamonds from Juina (Brazil). XRD and Raman spectroscopy have revealed that (Mg,Fe)SiO3 inclusions are orthopyroxene at ambient conditions. XRD patterns of these inclusions indicate that they consist of polycrystals. This polycrystalline textures together with high lattice strain of host diamond around these inclusions observed from EBSD may be an evidence for the retrograde phase transition of former bridgmanite. Single-phase inclusions of (Mg,Fe)SiO3 in superdeep diamonds are suggested to represent a retrograde phase of bridgmanite and fully inherit its initial chemical composition, including a high Al and low Ni contents [1,2]. The composite inclusions of (Mg,Fe)SiO3 with jeffbenite and other silicate and oxide phases may be interpreted as exsolution products from originally homogeneous bridgmanite [3]. The bulk compositions of these inclusions are rich in Al, Ti, and Fe which are similar to bridgmanite produced in experiments on the MORB composition. However, the retrograde origin of composite inclusions due to decomposition of Al-rich bridgmanite may be doubtful because each of observed phases may represent single-phase inclusions, i.e. bridgmanite and high pressure garnet (majoritic garnet), with similar compositional features.
Geochemistry International, Vol. 57, 9, pp. 964-972.
Mantle
diamond inclusions
Abstract: The paper describes mineralogical characteristics of SiO2 inclusions in sublithospheric diamonds, which typically have complicated growth histories showing alternating episodes of growth, dissolution, and postgrowth deformation and crushing processes. Nitrogen contents in all of the crystals do not exceed 71 ppm, and nitrogen is detected exclusively as B-defects. The carbon isotope composition of the diamonds varies from ?13? = -26.5 to -6.7‰. The SiO2 inclusions occur in association with omphacitic clinopyroxenes, majoritic garnets, CaSiO3, jeffbenite, and ferropericlase. All SiO2 inclusions are coesite, which is often associated with micro-blocks of kyanite in the same inclusions. It was suggested that these phases have been produced by the retrograde dissolution of primary Al-stishovite, which is also evidenced by the significant internal stresses in the inclusions and by deformations around them. The oxygen isotope composition of SiO2 inclusions in sublithospheric diamonds (?18O up to 12.9‰) indicates a crustal origin of the protoliths. The negative correlation between the ?18O of the SiO2 inclusions and the ?13C of their host diamonds reflects interaction processes between slab-derived melts and reduced mantle rocks at depths greater than 270 km.
Abstract: Much of our knowledge of the Earth’s deep interior comes from theoretical models, which are based on the results of experimental petrology and seismology. Diamonds in such models are the unique natural samples because they contain and preserve inclusions of mantle materials that have been entrapped during diamond growth and remained unchanged for long geologic time. In the present study for superdeep sublithospheric diamonds from Saõ-Luiz (Juina, Brazil) and northeastern Siberian Platform with mineral inclusions of the Transition Zone and Lower Mantle (majorite garnet, coesite (stishovite), ferropericlase and Mg-Si-, Ca-Si-, Ca-Ti, Ca-Si- Ti-perovskite), the diffraction of backscattered electrons technique (EBSD) revealed features of the internal structure. Superdeep diamonds are characterized by a defective and imperfect internal structure, which is associated with the processes of growth and post-growth plastic deformation. The deformation is manifested both in the form of stripes parallel to the (111) direction, and in the form of an unordered disorientation of crystal blocks up to 2°. In addition, for many crystals, a block structure was established with a greater disorientation of the sub-individuals, as well as the presence of “diamond-in-diamond” inclusions and microtwins. Additional stresses are often observed around inclusions associated with the high remaining internal pressure. It has previously been shown that the crystal structure of superdeep diamonds is significantly deformed around inclusions of perovskites, SiO2 (stishovite?), and Mg2SiO4 (ringwoodite?). The significant plastic deformations detected by the EBSD around inclusions testify to phase transitions in superdeep minerals (perovskites, stishovite, and ringwoodite) [1].
South America, Brazil, Africa, South Africa, Guinea, Canada, Northwest Territories
deposit - Sao Luis, Juina
Abstract: Bridgmanite (Mg,Fe)SiO3, a high pressure silicate with a perovskite structure, is dominant material in the lower mantle at the depths from 660 to 2700 km and therefore is probably the most abundant mineral in the Earth. Although synthetic analogues of this mineral have been well studied, no naturally occurring samples had ever been found in a rock on the planet’s surface except in some shocked meteorites. Due to its unstable nature under ambient conditions, this phase undergoes retrograde transformation to a pyroxene-type structure. The identification of the retrograde phase as ‘bridgmanite’ in so-called superdeep diamonds was based on the association with ferropericlase (Mg,Fe)O and other high-pressure (supposedly lower-mantle) minerals predicted from theoretical models and HP-HT experiments. In this study pyroxene inclusions in diamond grains from Juina (Brazil), one single-phase (Sample SL-14) and two composite inclusions of (Mg,Fe)SiO3 coexisting with (Mg,Fe)3Al2Si3O12 (Sample SL-13), and with (Mg,Fe)3Al2Si3O12 and (Mg,Fe)2SiO4 (Sample SL-80) have been analyzed to identify retrograde phases of former bridgmanite. XRD and Raman spectroscopy have revealed that these are orthopyroxene (Opx). (Mg,Fe)2SiO4 and (Mg,Fe)3Al2Si3O12 in these inclusions are identified as olivine and jeffbenite (TAPP). These inclusions are associated with inclusions of (Mg,Fe)O (SL-14), CaSiO3 (SL-80) and composite inclusion of CaSiO3+CaTiO3 (SL-13). XRD patterns of (Mg,Fe)SiO3 inclusions indicate that they consist of polycrystals. This polycrystalline textures together with high lattice strain of host diamond around these inclusions observed from EBSD may be an evidence for the retrograde phase transition of former bridgmanite. Single-phase inclusions of (Mg,Fe)SiO3 in superdeep diamonds are suggested to represent a retrograde phase of bridgmanite and fully inherit its initial chemical composition, including a high Al and low Ni contents [Harte, Hudson, 2013; Kaminsky, 2017]. The composite inclusions of (Mg,Fe)SiO3 with jeffbenite and other silicate and oxide phases may be interpreted as exolusion products from originally homogeneous bridgmanite [Walter et al., 2011]. The bulk compositions of these composite inclusions are rich in Al, Ti, and Fe which are similar to Al-rich bridgmanite produced in experiments on the MORB composition. However, the retrograde origin of composite inclusions due to decomposition of Al-rich bridgmanite may be doubtful because each of observed phases may represent single-phase inclusions, i.e. bridgmanite and high pressure garnet (majoritic garnet), with similar compositional features.
Africa, South Africa, Guinea, Australia,South America, Brazil, Canada, Northwest Territories
deposit - Koffiefontein, Kankan, Lac de Gras, Juina, Machado, Orroroo
Abstract: (Mg,Fe)SiO3 bridgmanite is the dominant phase in the lower mantle; however no naturally occurring samples had ever been found in terrestrial samples as it undergoes retrograde transformation to a pyroxene-type structure. To identify retrograde phases of former bridgmanite single-phase and composite inclusions of (Mg,Fe)SiO3 in a series of superdeep diamonds have been examined with electron microscopy, electron microprobe, Raman spectroscopy and X-ray diffraction techniques. Our study revealed that (Mg,Fe)SiO3 inclusions are represented by orthopyroxene. Orthopyroxenes in single-phase and composite inclusions inherit initial chemical composition of bridgmanites, including a high Al and low Ni contents. In composite inclusions they coexist with jeffbenite (ex-TAPP) and olivine. The bulk compositions of these composite inclusions are rich in Al, Ti, and Fe, which are similar but not fully resembling Al-rich bridgmanite produced in experiments on the MORB composition. The retrograde origin of composite inclusions due to decomposition of Al-rich bridgmanite may be doubtful because each of observed minerals may represent coexisting HP phases, i.e. bridgmanite or ringwoodite.
The American Mineralogist, Vol. 106. pp. 44-53. pdf
Russia
deposit - Kamchatka
Abstract: Taking into account recent publications, we provide additional comprehensive evidence that type Ib cuboctahedral diamonds and some other microcrystalline diamonds from Kamchatka volcanic rocks and alluvial placers cannot be natural and undoubtedly represent synthetic materials, which appear in the natural rocks by anthropogenic contamination. The major arguments provided in favor of the natural origin of those diamonds can be easily disproved. They include the coexistence of diamond and deltalumite from Koryaksky volcano; coexistence with super-reduced corundum and moissanite, Mn-Ni silicide inclusions, F-Cl enrichment and F/Cl ratios, and carbon and nitrogen isotopes in Tolbachik diamonds, as well as microtwinning, Mn-Ni silicides, and other inclusions in microcrystalline diamond aggregates from other Kamchatka placers. We emphasize the importance of careful comparison of unusual minerals found in nature, which include type Ib cuboctahedral diamonds and super-reduced phase assemblages resembling industrial slags, with synthetic analogs. The cavitation model proposed for the origin of Tolbachik diamonds is also unreliable since cavitation has only been shown to cause the formation of nanosized diamonds only.
International Journal of High Pressure Research, Vol. 39, 3, pp. 480-488.
Mantle
diamond morphology
Abstract: Here we present trace element compositions of synthetic diamonds, which show spectacular similarity with the compositions of metallic inclusions in type Ib cuboctahedral diamonds in ophiolitic chromitites and peridotites. The compositions of inclusions in synthetic and ophiolite diamonds closely correspond to Ni:Mn:Co?=?70:25:5 in wt.%, which is the most widely used catalyst for HPHT growth of synthetic diamonds in China. Thus, we claim for thorough reconsideration of diamonds in ophiolitic rocks and emphasize that most of them appear by anthropogenic contamination.
Lithos, doi. 10.1016/j. lithos.2020.105949 1p. Pdf
Mantle
subduction
Abstract: Crystal morphologies are essential for deciphering the reaction history of igneous and metamorphic rocks because they often record the interplay between nucleation and growth rates controlled by the departure from equilibrium. Here, we report an exceptional record of the morphological transition of olivine formed during subduction metamorphism and high-pressure dehydration of antigorite-serpentinite to prograde chlorite-harzburgite in the Almirez ultramafic massif (Nevado-Filábride Complex, Betic Cordillera, SE Spain). In this massif, rare varied-textured chlorite-harzburgite (olivine+enstantite+chlorite+oxides) —formed after high-P dehydration of antigorite-serpentinite— exhibits large olivine porphyroblasts made up of rounded cores mantled by coronas of tabular olivine grains, similar to single tabular olivines occurring in the matrix. The correlative X-ray ?-CT and EBSD study of two varied-textured chlorite-harzburgite samples show that tabular olivine in coronas is tabular on (100)Ol with c > b >> a, and grew in nearly the same crystallographic orientation as the rounded olivine cores of the porphyroblast. Quantitative textural analysis and mass balance indicate that varied-textured chlorite-harzburgite is the result of a two-stage nucleation and growth of olivine during the progress of the high-P dehydration of antigorite-serpentinite to chlorite-harzburgite reaction. The first stage occurred under a low affinity (?Gr) and affinity rate (?Gr/dt) of the antigorite dehydration reaction that resulted in a low time-integrated nucleation rate and isotropic growth of olivine, forming rounded olivine porphyroblasts. With further progress of the dehydration reaction, a second stage of relatively higher affinity and affinity rate resulted in a higher time-integrated nucleation rate of olivine coeval with a shift from isotropic to anisotropic olivine growth, leading to tabular olivines. The two-stage evolution resulted in olivine porphyroblasts made up of rounded cores mantled by coronas of tabular olivine grains characteristic of varied-texture chlorite-harzburgite. Although a switch to anisotropic tabular olivine in the second stage is consistent with the relative increase in the affinity and affinity rate, these changes cannot solely account for the growth of Almirez olivine tabular on (100). Tabular olivines in komatiites and other igneous rocks are tabular on (010)Ol with either a > c >> b, or a ? c > > b, in agreement with experimentally determined growth rates of olivine phenocrysts under moderate to high undercooling and cooling rates. On the other hand, olivine tabular on (100) is expected in the presence of highly polymerized fluids where inhibited growth of the olivine (100) and (010) interfaces occurs, respectively, due to dissociative and molecular adsorption of water monolayers. Rounded and tabular olivines in Almirez varied-textured chlorite-harzburgite show differing trace element compositions that we interpret as due to the infiltration of external fluids during antigorite dehydration. Isothermal infiltration of highly polymerized fluids would explain the shift in the affinity and affinity rate of the antigorite dehydration reaction, as well as the olivine morphology tabular on (100) due to the inhibited growth on the (100) and, to a lesser extent, (010). Our study shows that surface-active molecules may play an essential role in shaping the morphology of growing crystals during fluid-present metamorphic crystallization.
Abstract: Mantle flow can cause the Earth’s surface to uplift and subside, but the rates and durations of these motions are, in general, poorly resolved due to the difficulties in making measurements of relatively small vertical movements (hundreds of metres) over sufficiently large distances (about 1,000?km). Here we examine the effect of mantle upwelling through a study of Quaternary uplift along the coast of Angola. Using both optically stimulated luminescence on sediment grains, and radiocarbon dating of fossil shells, we date a 25?m coastal terrace at about 45 thousand years old, when sea level was about 75?m lower than today, indicating a rapid uplift rate of 1.8-2.6?mm?yr?1 that is an order of magnitude higher than previously obtained rates averaged over longer time periods. Automated extraction and correlation of coastal terrace remnants from digital topography uncovers a symmetrical uplift with diameter of more than 1,000?km. The wavelength and relatively short timescale of the uplift suggest that it is associated with a mantle process, possibly convective upwelling, and that the topography may be modulated by rapid short-lived pulses of mantle-derived uplift. Our study shows that stable continental regions far from the effects of glacial rebound may experience rapid vertical displacements of several millimetres per year.
Abstract: Mantle flow can cause the Earth’s surface to uplift and subside, but the rates and durations of these motions are, in general, poorly resolved due to the difficulties in making measurements of relatively small vertical movements (hundreds of metres) over sufficiently large distances (about 1,000?km). Here we examine the effect of mantle upwelling through a study of Quaternary uplift along the coast of Angola. Using both optically stimulated luminescence on sediment grains, and radiocarbon dating of fossil shells, we date a 25?m coastal terrace at about 45 thousand years old, when sea level was about 75?m lower than today, indicating a rapid uplift rate of 1.8-2.6?mm?yr?1 that is an order of magnitude higher than previously obtained rates averaged over longer time periods. Automated extraction and correlation of coastal terrace remnants from digital topography uncovers a symmetrical uplift with diameter of more than 1,000?km. The wavelength and relatively short timescale of the uplift suggest that it is associated with a mantle process, possibly convective upwelling, and that the topography may be modulated by rapid short-lived pulses of mantle-derived uplift. Our study shows that stable continental regions far from the effects of glacial rebound may experience rapid vertical displacements of several millimetres per year.
Vulic, P., Balic-Zunic, T., Belmonte, L.J., Kahlenberg, V.
Crystal chemistry of nephelines from ijolites and nepheline rich pegmatites: influence of composition and genesis on the crystal structure investigated by X-ray diffraction.
Mineralogy and Petrology, Vol. 101, 3-4, pp. 185-194.
Kahoui, M., Kemainsky, F.V., Griffin, W.L., Belousova, E., Mahdjoub, Y., Chabane, M.
Detrital pyrope garnets from the El Kseibat area, Algeria: a glimpse into the lithospheric mantle beneath the north-eastern edge of the West African Craton.
Journal of African Earth Sciences, In press available, 46p.
Kahoui, M., Kaminsky, F.V., Griffin, W.L., Belousova, E., Mahdjoub, Y., Chabane, M.
Detrital pyrope garnets from the El Kseibat area, Algeria: a glimpse into lithospheric mantle beneath the north eastern edge of the west African Craton.
Journal of African Earth Sciences, Vol. 63, Feb. pp. 1-11.
Kaminsky, F.V., Kahoui, M.,Mahdjoub, Y., Belousova, E., Griffin, W.L.,O'Reilly, S.Y.
Pyrope garnets from the Eglab Shield, Algeria: look inside the Earth's mantle in the West African Craton and suggestions about primary sources of diamond and indicator minerals.
Vladykin, N.V. ed. Deep seated magmatism, its sources and plumes, Russian Academy of Sciences, pp. 73-103.
Angewandte Chemie International, Vol. 60, 3, pp. 1546-1549. pdf
Global
diamond, graphite
Abstract: Recent density?functional theory (DFT) calculations raised the possibility that diamond could be degenerate with graphite at very low temperatures. Through high?accuracy calorimetric experiments closing gaps in available data, we reinvestigate the relative thermodynamic stability of diamond and graphite. For T<400 K, graphite is always more stable than diamond at ambient pressure. At low temperatures, the stability is enthalpically driven, and entropy terms add to the stability at higher temperatures. We also carried out DFT calculations: B86bPBE?25X?XDM//B86bPBE?XDM and PBE0?XDM//PBE?XDM results overlap with the experimental ?T?S results and bracket the experimental values of ?H and ?G, displaced by only about 2× the experimental uncertainty. Revised values of the standard thermodynamic functions for diamond are ?fHo=?2150±150 J?mol?1, ?fSo=3.44±0.03 J?K?1?mol?1 and ?fGo=?3170±150 J?mol?1.
Abstract: Yakutites are coarse (up to 15 mm or larger) aggregates dispersed for more than 500 km around the Popigai meteorite crater. They share many features of similarity with impact diamonds found inside the crater, in elemental and phase compositions, texture, and optical properties as revealed by X-ray photoelectron spectroscopy, X-ray diffraction, and optical spectroscopy (Raman, absorption, luminescence and microscopic) studies. The N3 vibronic system appearing in the luminescence spectra of Popigai impact diamonds (PIDs) indicates a presence of nitrogen impurity and a high-temperature annealing of diamonds that remained in the crater after solid-phase conversion from graphite. Yakutites lack nitrogen-vacancy centers as signatures of annealing, which may indicate quenching at the time of ejection. Thus, both PIDs and yakutites originated during the Popigai impact event and yakutites were ejected to large distances.
South African Journal of Geology, Vol. 121, pp. 271-286.
Africa, Mozambique
geodynamics
Abstract: Major, trace, radiogenic isotope and stable isotope data from lavas along the northeastern coast of Mozambique are described. The whole rock composition data demonstrate that the rocks are dominantly andesitic with compositions typical of calc-alkaline volcanic rocks from arc environments. SHRIMP U/Pb data from zircons indicate that the zircons are xenocrystic, having ages of between 500 Ma and 660 Ma, with the age of the lava constrained by Rb/Sr data at ~184 Ma. Strontium, Nd and Pb radiogenic isotope data support an interpretation of extensive mixing between a Karoo age basaltic magma (dolerite) from Antarctica and continental crust similar in composition to the Mozambique basement. Oxygen isotope data also imply a significant crustal contribution to the lavas. Possible tectonic settings for the lavas are at the margin of a plume or from a locally restricted compressional setting during Gondwana breakup processes.
Perraki, M., Proyer, A., Mposkos, E., Kaindl, R., Hoinkes, G.
Raman micro spectroscopy on diamond, graphite and other carbon polymorphs from the ultrahigh pressure metamorphic Kimi Complex of the Rhodope metamorphic province.
Earth and Planetary Science Letters, Vol. 241, 3-4, pp. 672-685.
Kaeser, B., Olker, B., Kait, A., Altherr, R., Pettke, T.
Pyroxenite xenoliths from Marsabit ( northern Kenya): evidence for different magmatic events in the lithospheric mantle and interaction between peridotite
Contributions to Mineralogy and Petrology, Vol. 157, 4, pp. 453-472.
Abstract: Geological mapping and zircon U-Pb/Hf isotope data from 35 samples from the central Tanzania Craton and surrounding orogenic belts to the south and east allow a revised model of Precambrian crustal evolution of this part of East Africa. The geochronology of two studied segments of the craton shows them to be essentially the same, suggesting that they form a contiguous crustal section dominated by granitoid plutons. The oldest orthogneisses are dated at ca. 2820 Ma (Dodoma Suite) and the youngest alkaline syenite plutons at ca. 2610 Ma (Singida Suite). Plutonism was interrupted by a period of deposition of volcano-sedimentary rocks metamorphosed to greenschist facies, directly dated by a pyroclastic metavolcanic rock which gave an age of ca. 2725 Ma. This is supported by detrital zircons from psammitic metasedimentary rocks, which indicate a maximum depositional age of ca. 2740 Ma, with additional detrital sources 2820 and 2940 Ma. Thus, 200 Ma of episodic magmatism in this part of the Tanzania Craton was punctuated by a period of uplift, exhumation, erosion and clastic sedimentation/volcanism, followed by burial and renewed granitic to syenitic magmatism. In eastern Tanzania (Handeni block), in the heart of the East African Orogen, all the dated orthogneisses and charnockites (apart from those of the overthrust Neoproterozoic granulite nappes), have Neoarchaean protolith ages within a narrow range between 2710 and 2630 Ma, identical to (but more restricted than) the ages of the Singida Suite. They show evidence of Ediacaran "Pan-African" isotopic disturbance, but this is poorly defined. In contrast, granulite samples from the Wami Complex nappe were dated at ca. 605 and ca. 675 Ma, coeval with previous dates of the "Eastern Granulites" of eastern Tanzania and granulite nappes of adjacent NE Mozambique. To the south of the Tanzania Craton, samples of orthogneiss from the northern part of the Lupa area were dated at ca. 2730 Ma and clearly belong to the Tanzania Craton. However, granitoid samples from the southern part of the Lupa "block" have Palaeoproterozoic (Ubendian) intrusive ages of ca. 1920 Ma. Outcrops further south, at the northern tip of Lake Malawi, mark the SE continuation of the Ubendian belt, albeit with slightly younger ages of igneous rocks (ca. 1870-1900 Ma) which provide a link with the Ponte Messuli Complex, along strike to the SE in northern Mozambique. In SW Tanzania, rocks from the Mgazini area gave Ubendian protolith ages of ca. 1980-1800 Ma, but these rocks underwent Late Mesoproterozoic high-grade metamorphism between 1015 and 1040 Ma. One granitoid gave a crystallisation age of ca. 1080 Ma correlating with known Mesoproterozoic crust to the east in SE Tanzania and NE Mozambique. However, while the crust in the Mgazini area was clearly one of original Ubendian age, reworked and intruded by granitoids at ca. 1 Ga, the crust of SE Tanzania is a mixed Mesoproterozoic terrane and a continuation from NE Mozambique. Hence the Mgazini area lies at the edge of the Ubendian belt which was re-worked during the Mesoproterozoic orogen (South Irumide belt), providing a further constraint on the distribution of ca. 1 Ga crust in SE Africa. Hf data from near-concordant analyses of detrital zircons from a sample from the Tanzania Craton lie along a Pb-loss trajectory (Lu/Hf = 0), extending back to ?3.9 Ga. This probably represents the initial depleted mantle extraction event of the cratonic core. Furthermore, the Hf data from all igneous samples, regardless of age, from the entire study area (including the Neoproterozoic granulite nappes) show a shallow evolution trend (Lu/Hf = 0.028) extending back to the same mantle extraction age. This implies the entire Tanzanian crust sampled in this study represents over 3.5 billion years of crustal reworking from a single crustal reservoir and that the innermost core of the Tanzanian Craton that was subsequently reworked was composed of a very depleted, mafic source with a very high Lu/Hf ratio. Our study helps to define the architecture of the Tanzanian Craton and its evolution from a single age-source in the early Eoarchaean.
Abstract: Nitrogen occupies about 80% of the Earth 's atmosphere and had an impact on the climate in the early Earth. However, the behavior of nitrogen especially in the deep Earth is still unclear. Nitrogen is depleted compared to other volatile elements in deep mantle (Marty et al., 2012). "Missing" nitrogen is an important subject in earth science. In this study, we compared nitrogen incorporation into lower-mantle minerals (bridgmanite, periclase and stishovite) from high-temperature high-pressure experiment using multianvil apparatus installed at Geodynamics Research Center, Ehime University under the conditions of 27 GPa and 1600°C-1900°C. In these experiments, we used Fe-FeO buffer in order to reproduce the redox state of the lower mantle. Two types of starting materials: a powder mixture of SiO2 and MgO and a powder mixture of SiO2, MgO, Al2O3 and Mg(OH)2 were used for starting materials. Nitrogen in recovered samples was analyzed using NanoSIMS installed at Atmosphere and Ocean Research Institute. A series of experimental results revealed that stishovite and periclase can incorporate more nitrogen than bridgmanite. This suggests that periclase, the major mineral in the lower mantle, may be a nitrogen reservoir. Furthermore, the results suggest that stishovite, which is formed by the transition of the SiO2-rich oceanic crustal sedimentary rocks transported to the lower mantle via subducting slabs, can incorporate more nitrogen than bridgmanite (20 ppm nitrogen solubility reported by Yoshioka et al. (2018)). Our study suggests that nitrogen would continue to be supplied to the lower mantle via subducting slabs since approximate 4 billion years ago when the plate tectonics had begun, forming a "Hidden" nitrogen reservoir in the lower mantle.
Physics and Chemistry of Minerals, Vol. 48, 31, 10p. Pdf
Mantle
water
Abstract: We have systematically investigated the high-pressure and high-temperature stability of Al-bearing dense hydrous magnesium silicate phases (DHMSs) in natural chlorite compositions containing?~?16 wt% H2O and?~?14 wt% Al2O3 between 14 and 25 GPa at 800-1600 °C by an MA8-type multi-anvil apparatus. A chemical mixture similar to Fe-free chlorite was also investigated for comparison. Following the pressure-temperature (P-T) path of cold subduction, the phase assemblage of phase E?+?phase D is stable at 14-25 GPa. Superhydrous phase B is observed between 16 and 22 GPa coexisting with phase E?+?phase D. Following the P-T path of hot subduction, the phase assemblage of phase E?+?garnet is identified at 14-18 GPa coexisting with the melt. The phase assemblage of superhydrous phase B?+?phase D was found at 18-25 GPa, which is expected to survive at higher P-T conditions. We have confirmed that the presence of Al could enhance the stability of DHMSs. Our results indicate that, after chlorite decomposition at the shallow region of the subduction zone, the wide stability field of Al-bearing DHMSs can increase the possibility of water transportation into the deep lower mantle.
Physics and Chemistry of Minerals, Vol. 48, 10, 6p. Pdf s00269-021-Q1163-5
Mantle
bridgmanite
Abstract: Phase D is proposed to be the most important hydrous phase at the upper part of the lower mantle, and it has been shown to coexist with bridgmanite (Brg), the most abundant mineral and main host for Al2O3 in the lower mantle. The concentration of Al in Phase D could significantly increase the thermal stability field of Phase D, therefore, partitioning of Al between Brg and Phase D is of particular importance to constrain water distribution in the deep mantle. Here, we performed high P-T experiments in MgO-Al2O3-SiO2-H2O system to investigate the partitioning of Al between Brg and Phase D up to 32 GPa and 1350 °C. Our results indicated that Al distributes strongly into Phase D relative to Brg and the partition coefficient slightly decreases with increasing temperature. Al-bearing Phase D exhibits a very high thermal stability region, but it completely decomposed around 28 GPa and 1350 °C, at which point Brg coexisted with a large amount of melt. The depth?~?850 km (28 GPa) is thus proposed to be the second choke point for hydrous minerals. This may shed new lights on several important geophysical observations in subduction zones.
Abstract: Dense hydrous magnesium silicates (DHMSs) are considered important water carriers in the deep Earth. Due to the significant effect of Fe on the stability of DHMSs, Fe-bearing Phase D (PhD) deserves much attention. However, few experiments have been conducted to determine the stability of PhD in different bulk compositions. In this study, we provide experimental constraints for the stability of PhD in the AlOOH-FeOOH-Mg1.11Si1.89O6H2.22 system between 18 and 25 GPa at 1000-1600 °C, corresponding to the P-T conditions of the mantle transition zone and uppermost lower mantle. Fe3+-bearing PhD was synthesized from the FeOOH-Mg1.11Si1.89O6H2.22 binary system with two different Fe3+ contents. The resultant Al,Fe3+-bearing compositions are close to analog specimens of the fully oxidized mid-ocean ridge basalt (MORB) and pyrolite in the AlOOH-FeOOH-Mg1.11Si1.89O6H2.22 ternary system. The substitution mechanism of Fe is shown to be dependent on pressure, and Fe3+ occupies both Mg and Si sites in PhD at pressures below 21 GPa. In contrast, Fe3+ only occupies Si site at pressures exceeding 21 GPa. The presence of Fe3+ results in a slight reduction in the thermal stability field of PhD in the FeOOH-Mg1.11Si1.89O6H2.22 system in comparison to Mg-bearing, Fe-free PhD. In contrast, Al,Fe3+-bearing PhD is more stable than Mg-bearing PhD in both MORB and pyrolite compositions. In this regard, Al,Fe3+-bearing PhD could act as a long-term water reservoir during subduction processes to the deep mantle.
Abstract: The Kovdor baddeleyite-apatite-magnetite deposit in the Kovdor phoscorite-carbonatite pipe is situated in the western part of the zoned alkali-ultrabasic Kovdor intrusion (NW part of the Fennoscandinavian shield; Murmansk Region, Russia). We describe major intrusive and metasomatic rocks of the pipe and its surroundings using a new classification of phoscorite-carbonatite series rocks, consistent with the IUGS recommendation. The gradual zonation of the pipe corresponds to the sequence of mineral crystallization (forsterite-hydroxylapatite-magnetite-calcite). Crystal morphology, grain size, characteristic inclusions, and composition of the rock-forming and accessory minerals display the same spatial zonation pattern, as do the three minerals of economic interest, i.e. magnetite, hydroxylapatite, and baddeleyite. The content of Sr, rare earth elements (REEs), and Ba in hydroxylapatite tends to increase gradually at the expense of Si, Fe, and Mg from early apatite-forsterite phoscorite (margins of the pipe) through carbonate-free, magnetite-rich phoscorite to carbonate-rich phoscorite and phoscorite-related carbonatite (inner part). Magnetite displays a trend of increasing V and Ca and decreasing Ti, Mn, Si, Cr, Sc, and Zn from the margins to the central part of the pipe; its grain size initially increases from the wall rocks to the inner part and then decreases towards the central part; characteristic inclusions in magnetite are geikielite within the marginal zone of the phoscorite-carbonatite pipe, spinel within the intermediate zone, and ilmenite within the inner zone. The zoning pattern seems to have formed due to both cooling and rapid degassing (pressure drop) of a fluid-rich magmatic column and subsequent pneumatolytic and hydrothermal processes.
Abstract: The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite-carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe. The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti-Mn-Si-rich magnetite with ilmenite exsolution lamellae, fine grains of Fe-Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg-Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti-V-Ca-rich magnetite with exsolution inclusions of geikielite-ilmenite, fine grains of Ba-Sr-Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.
Abstract: The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite-carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe. The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti-Mn-Si-rich magnetite with ilmenite exsolution lamellae, fine grains of Fe-Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg-Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti-V-Ca-rich magnetite with exsolution inclusions of geikielite-ilmenite, fine grains of Ba-Sr-Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.
Abstract: The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite-carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe.The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti-Mn-Si-rich magnetite with ilmenite exsolution lamellae, fine grains of Fe-Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg-Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti-V-Ca-rich magnetite with exsolution inclusions of geikielite-ilmenite, fine grains of Ba-Sr-Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.
Abstract: This paper reviews the available information on the geology, mineralogy, and resources of the significant rare earth element (REE) deposits and occurrences in the Murmansk Region, northwest Russia. The region has one of the largest endowments of REE in the world, primarily the light REE (LREE); however, most of the deposits are of potential economic interest for the REE, only as by-products of other mining activity, because of the relatively low REE grade. The measured and indicated REE2O3 resources of all deposits in the region total 22.4, and 36.2 million tonnes, respectively. The most important resources occur in (1) the currently mined Khibiny titanite-apatite deposits, and (2) the Lovozero loparite-eudialyte deposit. The Kovdor baddeleyite-apatite-magnetite deposit is a potentially important resource of scandium. These deposits all have polymetallic ores, i.e., REE would be a by-product of P, Ti, and Al mining at Khibiny, Fe, Zr, Ta, and Nb mining at Lovozero, and Fe and Ti mining at Afrikanda. The Keivy block has potential for heavy REE exploitation in the peralkaline granite-hosted Yumperuaiv and Large Pedestal Zr-REE deposits and the nepheline syenite-hosted Sakharyok Zr-REE deposit. With the exception of the Afrikanda perovskite-magnetite deposit (LREE in perovskite) and the Kovdor baddeleyite-apatite-magnetite deposit (scandium in baddelyite), carbonatite-bearing complexes of the Murmansk Region appear to have limited potential for REE by-products. The sound transport, energy, and mining infrastructure of the region are important factors that will help ensure future production of the REE.
Abstract: The Lovozero peralkaline massif (Kola Peninsula, Russia) has several deposits of Zr, Nb, Ta and rare earth elements (REE) associated with eudialyte-group minerals (EGM). Eudialyte from the Alluaiv Mt. often forms zonal grains with central parts enriched in Zr (more than 3 apfu) and marginal zones enriched in REEs. The detailed study of the chemical composition (294 microprobe analyses) of EGMs from the drill cores of the Mt. Alluaiv-Mt. Kedykvyrpakhk deposits reveal more than 70% Zr-enriched samples. Single-crystal X-ray diffraction (XRD) was performed separately for the Zr-rich (4.17 Zr apfu) core and the REE-rich (0.54 REE apfu) marginal zone. It was found that extra Zr incorporates into the octahedral M1A site, where it replaces Ca, leading to the symmetry lowering from R3¯m to R32. We demonstrated that the incorporation of extra Zr into EGMs makes the calculation of the eudialyte formula on the basis of Si + Al + Zr + Ti + Hf + Nb + Ta + W = 29 apfu inappropriate.
Contributions to Mineralogy and Petrology, Vol. 175, 22p. Pdf.
Russia
deposit - Obnazhennaya
Abstract: The petrology, mineral major and trace-element concentrations, and garnet oxygen isotopic composition of low-MgO (11-16 wt%) eclogites from the Obnazhennaya kimberlite, Siberian craton, are used to infer their petrogenesis. These eclogites contain two types of compositionally distinct garnet: granular coarse garnet, and garnet exsolution (lamellae and fine-grained garnet) in clinopyroxene. The former record higher temperatures at lower pressures than the latter, which record the last stage of equilibrium at moderate pressure-temperature conditions 2.3-3.7 GPa and 855-1095 °C in the upper mantle at the time of entrainment. Although derived from the garnet stability field, these rocks have low-pressure cumulate protoliths containing plagioclase, olivine, and clinopyroxene as reflected by pronounced positive Eu and Sr anomalies in all eclogites, and low heavy rare earth element (HREE) contents in both minerals and reconstructed bulk rocks for a number of samples. Major elements, transition metals, and the HREE compositions of the reconstructed whole rocks are analogous to modern oceanic gabbro cumulates. Despite geochemical signatures supporting an oceanic crust origin, mantle-like ?18O of the garnets (5.07-5.62‰) for most samples indicates that the protoliths either did not interact with seawater or have coincidently approximately normal igneous values. Some of the eclogite xenoliths have lower SiO2 contents and depleted light REE ((Nd/Yb)N?
Abstract: The petrology, mineral major and trace element concentrations, and garnet oxygen isotopic composition of low-MgO (11-16 wt.%) eclogites from the Obnazhennaya kimberlite, Siberian craton, are used to infer their petrogenesis. These eclogites equilibrated at moderate pressure-temperature conditions 2.3-3.7 GPa and 855- 1095?C at the time of entrainment. Although derived from the garnet stability field, these rocks have low-pressure cumulate protoliths containing plagioclase, olivine, and clinopyroxene as reflected by pronounced positive Eu and Sr anomalies in all eclogites, and low heavy rare earth element (HREE) contents in both minerals and reconstructed bulk rocks for a number of samples. Major elements, transition metals, and the HREE compositions of the reconstructed whole rocks are analogous to modern oceanic gabbro cumulates. Despite geochemical signatures supporting an oceanic crust origin, mantle-like ?18O of the garnets (5.07-5.62 ‰ ) for most samples indicates that the protoliths either did not interact with seawater or have coincidently approximately normal igneous values. Some of the eclogite xenoliths have lower SiO2 contents and depleted light REE ((Nd/Yb)N ? 1) compared to modern oceanic gabbros, suggesting that they experienced partial melting. Positively inclined middle to heavy-REE patterns ((Dy/Yb)N ?1) of the reconstructed bulk rocks mostly result from repeated partial melting in the eclogite stability field, based on melting model calculations. We therefore suggest that the Obnazhennaya low-MgO eclogites may represent the gabbroic section of subducted or foundered basaltic crust that underwent continued partial melting processes at high pressures where garnet was the main residual phase.
Abstract: The article describes the petrography and mineralogy of xenoliths ilmenite-phlogopite containing deformed and granular peridotites from the Udachnaya-Eastern pipe. The age of pholopite porphyroclast from the studied deformed xenoliths matches with age of Phl megacryst and itself hosted kimberlites from Udachnaya pipe indicating the following processes closed in time: (1) crystallization of the low-Cr megacryst association; (2) deformation of rocks on the mantle lithosphere-asthenosphere border during the kimberlite-forming cycle; (3) formation of protokimberlite melts.
International Geology Review, in press available 24p. Pdf
Europe, Ukraine
deposit - Priazovie
Abstract:
Major, minor and trace element compositions of mantle xenocrysts from Devonian kimberlite pipes in the Priazovie give an insight into the mantle structure beneath the SE Ukranian Shield and its evolution. Garnets yield low temperature conditions as determined by monomineral thermobarometry. The mantle lithosphere is sharply divided at 4.2 GPa, marked by a high temperature Cpx-Ilm-Phl trend, eclogites and changes in pyrope geochemistry. Seven layers are detected: Ist layer at 2.5-1 GPa is enriched mantle (Fe#Ol ~ 0.11 ? 0.14) with Gar- pyroxenites and Sp peridotites; IInd at 2.5-3.2 GPa - Gar-Sp (Fe#Ol 0.08 ? 0.10) peridotite. IIId at 4.3-3.2 GPa is formed of Archaean- Proterozoic peridotites with Fe#Ol ~0.07 ? 0.095. IVth at 3.2-5 GPa- contains pyroxenitic Gar with higher Ca, eclogites, Chr and Cpx (Fe#Ol ~0.10 ? 0.125); Vth at 5.8 ? 5 GPa is marked by sub-Ca garnets, Cr-rich chromites and Mg-Cr ilmenites; VIth layer at 5.8-6.8 GPa contains Fe-enriched pyropes, almandines and Cr-Mg ilmenites near the lithosphere base; VIIth layer > 6.8 GPa consists of ‘hot’ Fe-rich garnets. Garnets show increasing enrichment in LREE, LILE, Hf, Zr with decreasing pressure. Primitive garnets have round REE patterns; depleted ones have S-type patterns inflected at Nd. Garnets from 6.5 to 3 GPa show increasing La/Ybn, Zr-Hf, LILE. Peridotitic clinopyroxenes have inclined linear trace element patterns rounded from La to Pr with high LILE and HFSE levels. The Fe-rich group (reacted with eclogites) shows bell-shaped irregular patterns with LILE close to the LREE levels. A possible reason for LILE (HFSE and) enrichment of the upper part of the mantle is subduction metasomatsm in Archaean times (with participation of mature continental sediments) activated by plumes at 1.8 Ga and earlier which produced pervasive focused melt flow with remelting of mica-amphibole metasomatites giving continuous REE and LILE enrichment in mantle lithologies from 5.8 to 2.5 GPa.
International Geology Review, Vol. 63, 10, pp. 1288-1309.
Europe, Ukraine
deposit - Priazovie
Abstract: Major, minor and trace element compositions of mantle xenocrysts from Devonian kimberlite pipes in the Priazovie give an insight into the mantle structure beneath the SE Ukranian Shield and its evolution. Garnets yield low temperature conditions as determined by monomineral thermobarometry. The mantle lithosphere is sharply divided at 4.2 GPa, marked by a high temperature Cpx-Ilm-Phl trend, eclogites and changes in pyrope geochemistry. Seven layers are detected: Ist layer at 2.5-1 GPa is enriched mantle (Fe#Ol ~ 0.11 ? 0.14) with Gar- pyroxenites and Sp peridotites; IInd at 2.5-3.2 GPa - Gar-Sp (Fe#Ol 0.08 ? 0.10) peridotite. IIId at 4.3-3.2 GPa is formed of Archaean- Proterozoic peridotites with Fe#Ol ~0.07 ? 0.095. IVth at 3.2-5 GPa- contains pyroxenitic Gar with higher Ca, eclogites, Chr and Cpx (Fe#Ol ~0.10 ? 0.125); Vth at 5.8 ? 5 GPa is marked by sub-Ca garnets, Cr-rich chromites and Mg-Cr ilmenites; VIth layer at 5.8-6.8 GPa contains Fe-enriched pyropes, almandines and Cr-Mg ilmenites near the lithosphere base; VIIth layer > 6.8 GPa consists of ‘hot’ Fe-rich garnets. Garnets show increasing enrichment in LREE, LILE, Hf, Zr with decreasing pressure. Primitive garnets have round REE patterns; depleted ones have S-type patterns inflected at Nd. Garnets from 6.5 to 3 GPa show increasing La/Ybn, Zr-Hf, LILE. Peridotitic clinopyroxenes have inclined linear trace element patterns rounded from La to Pr with high LILE and HFSE levels. The Fe-rich group (reacted with eclogites) shows bell-shaped irregular patterns with LILE close to the LREE levels. A possible reason for LILE (HFSE and) enrichment of the upper part of the mantle is subduction metasomatsm in Archaean times (with participation of mature continental sediments) activated by plumes at 1.8 Ga and earlier which produced pervasive focused melt flow with remelting of mica-amphibole metasomatites giving continuous REE and LILE enrichment in mantle lithologies from 5.8 to 2.5 GPa.
Abstract: The modal metasomatic alteration for lithosphere mantle may be investigated using mantle xenoliths from kimberlite pipes. The mantle xenoliths from upper-Jurassic Obnajennaya kimberlite pipe (Kuoika field, Yakutia) were studied. Three main xenoliths groups in Obnajennaya pipe were distinguished based on the petrographic and geochemical features: 1. Sp, Sp-Grt, Grt harzburgites - lherzolites, Sp, Sp-Grt, Grt olivine websterites and Sp, Sp-Grt, Grt websterite (so-called magnesium group - about 80 % from xenoliths). The high magnesium mineral composition, high estimated temperature (1250 - 1500°?) for exsolution pyroxene megacrystals, presence of sulphide globules and distribution curves for rare earth elements in garnets (La-Yb increasing) are to assume the crystallisation from melt. The 10% magnesium mantle xenoliths are observed the secondary metasomatic phlogopite and amphibole (pargasite). The clinopyroxene distribution curves demonstrate the wide range of values and altered samples show higher content HFSE group elements that primary clinopyroxene. The increasing of HFSE and rare earth element concentrations can also be traced by the amphibole chemical composition. The 40Ar/39Ar dating of phlogopite from was result 1639 ± 5 Ma nearly corresponding to the time of Siberian craton accretion Thus during Siberian craton accretion (about 1.7 Ga) the melts-fluids enriching Nb + Ta and REE impacted on lithosphere mantle under Kuoika field. 2. Eclogites and Grt clinopyroxenites with similar mineral composition (about 10-15% xenoliths). The high ?O18 for garnet and clinopyroxene (5.7–5.8‰) allows to assume subduction genesis. 3. Phl-Ilm rocks characterizing ferrous mineral composition (~ 10 % xenoliths). This group are charactetrized are ferrous mineral composition. The 40Ar/39Ar phlogopite dating resulted to 800-500 Ma, signed the potassium and titanium metasomatic fluide – melt influenced
Abstract: This study presents compositional data for a statistically significant number (n=180) of heated and quenched (recreated) carbonate melt inclusions trapped in magnetite and clinopyroxene in jacupirangite from Kerimasi volcano (Tanzania). On the basis of homogenization experiments for clinopyroxene-hosted melt inclusions and forsterite-monticellite-calcite phase relations, a range of 1000 to 900 °C is estimated for their crystallization temperatures. Petrographic observations and geochemical data show that during jacupirangite crystallization, a CaO-rich and alkali-"poor" carbonate melt (relative to Oldoinyo Lengai natrocarbonatite) existed and was entrapped in the precipitating magnetite, forming primary melt inclusions, and was also enclosed in previously crystallized clinopyroxene as secondary melt inclusions. The composition of the trapped carbonate melts in magnetite and clinopyroxene are very similar to the parental melt of Kerimasi calciocarbonatite; i.e., enriched in Na2O, K2O, F, Cl and S, but depleted in SiO2 and P2O5 relative to carbonate melts entrapped at an earlier stage and higher temperature (1050-1100 °C) during the formation of Kerimasi afrikandite. Significant compositional variation is shown by the major minerals of Kerimasi plutonic rocks (afrikandite, jacupirangite and calciocarbonatite). Magnetite and clinopyroxene in the jacupirangite are typically transitional in composition between those of afrikandite and calciocarbonatite. These data suggest that the jacupirangite represents an intermediate stage between the formation of afrikandite and calciocarbonatite. Jacupirangite most probably formed when immiscible silicate and carbonate melts separated from the afrikandite body, although the carbonate melt was not separated completely from the silicate melt fraction. In general, during the evolution of the carbonate melt at Kerimasi, concentrations of P2O5 and SiO2 decreased, whereas volatile content (alkalis, S, F, Cl and H2O) increased. Volatiles were incorporated principally in nyerereite, shortite, burbankite, nahcolite and sulfohalite as identified by Raman spectrometry. These extremely unstable minerals cannot be found in the bulk rock, because of alteration by secondary processes. On the basis of these data, an evolutionary model is developed for Kerimasi plutonic rocks.
Abstract: This study presents compositional data for a statistically significant number (n = 180) of heated and quenched (recreated) carbonate melt inclusions trapped in magnetite and clinopyroxene in jacupirangite from Kerimasi volcano (Tanzania). On the basis of homogenization experiments for clinopyroxene-hosted melt inclusions and forsterite-monticellite-calcite phase relations, a range of 1000 to 900 °C is estimated for their crystallization temperatures. Petrographic observations and geochemical data show that during jacupirangite crystallization, a CaO-rich and alkali-"poor" carbonate melt (relative to Oldoinyo Lengai natrocarbonatite) existed and was entrapped in the precipitating magnetite, forming primary melt inclusions, and was also enclosed in previously crystallized clinopyroxene as secondary melt inclusions. The composition of the trapped carbonate melts in magnetite and clinopyroxene is very similar to the parental melt of Kerimasi calciocarbonatite; i.e., enriched in Na2O, K2O, F, Cl and S, but depleted in SiO2 and P2O5 relative to carbonate melts entrapped at an earlier stage and higher temperature (1050-1100 °C) during the formation of Kerimasi afrikandite. Significant compositional variation is shown by the major minerals of Kerimasi plutonic rocks (afrikandite, jacupirangite and calciocarbonatite). Magnetite and clinopyroxene in the jacupirangite are typically transitional in composition between those of afrikandite and calciocarbonatite. These data suggest that the jacupirangite represents an intermediate stage between the formation of afrikandite and calciocarbonatite. Jacupirangite most probably formed when immiscible silicate and carbonate melts separated from the afrikandite body, although the carbonate melt was not separated completely from the silicate melt fraction. In general, during the evolution of the carbonate melt at Kerimasi, concentrations of P2O5 and SiO2 decreased, whereas volatile content (alkalis, S, F, Cl and H2O) increased. Volatiles were incorporated principally in nyerereite, shortite, burbankite, nahcolite and sulfohalite as identified by Raman spectrometry. These extremely unstable minerals cannot be found in the bulk rock, because of alteration by secondary processes. On the basis of these data, an evolutionary model is developed for Kerimasi plutonic rocks.
Abstract: This study presents compositional data for a statistically significant number (n = 180) of heated and quenched (recreated) carbonate melt inclusions trapped in magnetite and clinopyroxene in jacupirangite from Kerimasi volcano (Tanzania). On the basis of homogenization experiments for clinopyroxene-hosted melt inclusions and forsterite-monticellite-calcite phase relations, a range of 1000 to 900 °C is estimated for their crystallization temperatures. Petrographic observations and geochemical data show that during jacupirangite crystallization, a CaO-rich and alkali-"poor" carbonate melt (relative to Oldoinyo Lengai natrocarbonatite) existed and was entrapped in the precipitating magnetite, forming primary melt inclusions, and was also enclosed in previously crystallized clinopyroxene as secondary melt inclusions. The composition of the trapped carbonate melts in magnetite and clinopyroxene is very similar to the parental melt of Kerimasi calciocarbonatite; i.e., enriched in Na2O, K2O, F, Cl and S, but depleted in SiO2 and P2O5 relative to carbonate melts entrapped at an earlier stage and higher temperature (1050-1100 °C) during the formation of Kerimasi afrikandite. Significant compositional variation is shown by the major minerals of Kerimasi plutonic rocks (afrikandite, jacupirangite and calciocarbonatite). Magnetite and clinopyroxene in the jacupirangite are typically transitional in composition between those of afrikandite and calciocarbonatite. These data suggest that the jacupirangite represents an intermediate stage between the formation of afrikandite and calciocarbonatite. Jacupirangite most probably formed when immiscible silicate and carbonate melts separated from the afrikandite body, although the carbonate melt was not separated completely from the silicate melt fraction. In general, during the evolution of the carbonate melt at Kerimasi, concentrations of P2O5 and SiO2 decreased, whereas volatile content (alkalis, S, F, Cl and H2O) increased. Volatiles were incorporated principally in nyerereite, shortite, burbankite, nahcolite and sulfohalite as identified by Raman spectrometry. These extremely unstable minerals cannot be found in the bulk rock, because of alteration by secondary processes. On the basis of these data, an evolutionary model is developed for Kerimasi plutonic rocks.
Abstract: The use of confocal HR-Raman mapping opens new perspectives in studying melt inclusions. Our major goal is to show advantages of this powerful technique through case studies carried out on alkaline and carbonatite rocks of Kerimasi volcano (East African Rift). Raman spectrometry is one of the few methods that enable qualitative nondestructive analysis of both solid and fluid phases, therefore it is widely used for the identification of minerals and volatiles within melt and fluid inclusions. For better understanding of petrogenetic processes in carbonatite systems it is essential to find all mineral phases in the melt inclusions trapped in intrusive or volcanic rocks. Previous Raman spectroscopic point measurements in melt inclusions revealed the presence of daughter phases (e.g. alkali carbonates, hydrocarbonates) [1] but utilizing Raman mapping on them even provides information on their size, shape and distribution. Raman 3D mapping were applied on unheated multiphase melt inclusions of intrusive and volcanic rocks with high spatial resolution (XY plane < 1 micron) with a depth scan (Z step) as low as 0.5 micron at every XY point, parallel to the surface of the host minerals. Analysis below the surface of the host mineral is especially useful because we can avoid the loss of sensitive (e.g. water soluble) phases and contamination of the melt inclusions, moreover unexposed melt inclusions are suitable for further analytical measurements (e.g. EPMA, microthermometry). By scanning multiple layers 2D or 3D Raman images can be gained, thus we can get an insight into post entrapment crystallization processes that contribute to a more precise description of the evolution of alkaline and carbonatite rocks.
Dongre, A., Kamde, G., Chalapathi Rao, N.V., Kale, H.S.
Is megacrystic/xenocrystic ilmenite entrainment in the source magma responsible for the non-Diamondiferous nature of the Maddur-Kotakonda-Narayanpet kimberlites
Geological Society of India, Bangalore November Meeting Group Discussion on Kimberlites and Related Rocks India, Abstract p. 72.
Abstract: Yellow cuboid diamonds are commonly found in diamondiferous alluvial placers of the Northeastern Siberian platform. The internal structure of these diamonds have been studied by optical microscopy, X-Ray topography (XRT) and electron backscatter diffraction (EBSD) techniques. Most of these crystals have typical resorption features and do not preserve primary growth morphology. The resorption leads to an evolution from an originally cubic shape to a rounded tetrahexahedroid. Specific fibrous or columnar internal structure of yellow cuboid diamonds has been revealed. Most of them are strongly deformed. Misorientations of the crystal lattice, found in the samples, may be caused by strains from their fibrous growth or/and post-growth plastic deformation.
Doklady Earth Sciences, Vol. 470, 2, pp. 1059-1062.
Russia
Deposit - Internationalskaya
Abstract: The staged high-pressure annealing of natural cubic diamonds with numerous melt microinclusions from the Internatsional’naya kimberlite pipe was studied experimentally. The results mainly show that the carbonate phases, the daughter phases in partially crystallized microinclusions in diamonds, may undergo phase transformations under the mantle P-T conditions. Most likely, partial melting and further dissolution of dolomite in the carbonate-silicate melt (homogenization of inclusions) occur in inclusions. The experimental data on the staged high-pressure annealing of diamonds with melt microinclusions allow us to estimate the temperature of their homogenization as 1400-1500°C. Thus, cubic diamonds from the Internatsional’naya pipe could have been formed under quite high temperatures corresponding to the lithosphere/asthenosphere boundary. However, it should be noted that the effect of selective capture of inclusions with partial loss of volatiles in relation to the composition of the crystallization medium is not excluded during the growth. This may increase the temperature of their homogenization significantly between 1400 and 1500°C.
Physics and Chemistry of Minerals, Vol. 47, 4, 7p. Pdf
Russia, Siberia
deposit - Khololmolokh
Abstract: In recent years, despite significant progress in the development of new methods for the synthesis of diamond crystals and in their post-growth treatment, many questions remain unclear about the conditions for the formation and degradation of aggregate impurity nitrogen forms. Meanwhile, they are very important for understanding (evaluating) the origin, age, and post-growth conditions of natural diamonds. In the present work, an attempt was made to analyze the causes of the formation of high concentrations of N3V centers in natural IaB-type diamonds from the Kholomolokh placer (the Northeast Siberian craton). The possibility of decay of B centers during the plastic deformation of diamonds is analyzed and experiments on the high-temperature annealing of diamonds containing B centers are reported. The formation of N3V centers during the destruction of the B centers at high-pressure annealing of crystals has been established by experiment. It is assumed that, in the post-growth period, diamond crystals were exposed to tectono-thermal stages of raising the superplumes of the Earth's crust of the Siberian craton.
Zedgenizov, D., Rubatto, D., Shatsky, V., Ragozin, A., Kalinina, V.
Eclogitic diamonds from variable crustal protoliths in the northeastern Siberian Craton: trace elements and coupled Delta13C-delta 180 signatures in diamonds and garnet inclusions.
Abstract: New findings of silicate-melt inclusions in two alluvial diamonds (from the Kholomolokh placer, northeastern Siberian Platform) are reported. Both diamonds exhibit a high degree of N aggregation state (60-70% B) suggesting their long residence in the mantle. Raman spectral analysis revealed that the composite inclusions consist of clinopyroxene and silicate glass. Hopper crystals of clinopyroxene were observed using scanning electron microscopy and energy-dispersive spectroscopic analyses; these are different in composition from the omphacite inclusions that co-exist in the same diamonds. The glasses in these inclusions contain relatively high SiO2, Al2O3, Na2O and, K2O. These composite inclusions are primary melt that partially crystallised at the cooling stage. Hopper crystals of clinopyroxene imply rapid cooling rates, likely related to the uplift of crystals in the kimberlite melt. The reconstructed composition of such primary melts suggests that they were formed as the product of metasomatised mantle. One of the most likely source of melts/fluids metasomatising the mantle could be a subducted slab.
Abstract: The variety of morphology and properties of natural diamonds reflects variations in the conditions of their formation in different mantle environments. This study presents new data on the distribution of impurity centers in diamond type Ib-IaA from xenolith of bimineral eclogite from the Udachnaya kimberlite pipe. The high content of non-aggregated nitrogen C defects in the studied diamonds indicates their formation shortly before the stage of transportation to the surface by the kimberlite melt. The observed sectorial heterogeneity of the distribution of C- and A-defects indicates that aggregation of nitrogen in the octahedral sectors occurs faster than in the cuboid sectors.
Diamondiferous subcontinental lithospheric mantle of the northeastern Siberian Craton: evidence from mineral inclusions in alluvial diamonds. Kapchan Fold Belt Olenek Province
Abstract: Alluvial placers of the northeastern Siberian Platform are characterized by a specific diamond population: regular cuboids, forming a continuous color series from yellowish-green to yellow and dark orange. This is the first comprehensive study of a large number of cuboid diamonds focusing on their morphology, N content and aggregation state, photoluminescence, C isotopic composition and inclusions. The cuboids are cubic (i.e. nearly flat faced) to subrounded crystals; most of them are resorbed. The cathodolominescence images and the birefringence patterns show that many cuboid diamonds record deformation. The cuboid diamonds are characterized by unusual FTIR spectra with the presence of C- (single nitrogen atom) and A- (pair of neighbour nitrogen atoms) centers, and two centers of unknown origin, termed X and Y. The presence of single substitutional nitrogen defects (C centers) in all cuboid diamonds testifies either storage in the mantle at relatively cool conditions or formation just prior to eruption of their host kimberlites. The studied diamonds are also characterized by the presence of specific set of luminescence centers: N3, H3, S1, NVo and NV?, some of which are suggested to have formed during deformation subsequent to diamond growth. The cuboid diamonds show a wide range of carbon isotope compositions from mantle-like values towards strongly 13C depleted compositions (? 6.1 to ? 20.2‰ ?13C). Combined with the finding of an eclogitic sulfide inclusion, the light carbon isotope compositions link the formation of the studied cuboids to deeply subducted basic protoliths, i.e. former oceanic crust.
Physics and Chemistry of Minerals, Vol. 47, 20 doi.org/10/1007/ s00269-020-01088-5 19p. Pdf
Russia
deposit - International
Abstract: New spectroscopic data were obtained to distinguish the specific features of brown and pink diamonds from Internatsionalnaya kimberlite pipe (Siberian craton). It is shown that pink and brown samples differ markedly in the content and degree of aggregation of nitrogen defects. Pink diamonds generally have higher nitrogen content and a lower aggregation state compared to brown samples, which often show significant variations in nitrogen content and aggregation state between different growth zones. The 491 and 576 nm luminescent centres, which are signs of deformed brown diamonds, are absent or of low intensity in pink diamonds implying that high nitrogen content predominantly in A form in the pink diamonds had stiffened the diamonds against natural plastic deformation. The GR1 centre, formed by a neutrally charged vacancy, was observed only in pink diamonds, which may be due to their formation and storage in the mantle at lower-temperature conditions. Mineral inclusions indicate peridotitic and eclogitic paragenesis for studied brown and pink diamonds, respectively. It is suggested that brown diamonds have been formed in a primitive mantle at higher temperatures and/or stored there much longer.
Contributions to Mineralogy and Petrology, Vol. 175, 98 10.1007/s00410-020-01741-w 11p. Pdf
Russia, Yakutia
diamond crystallography
Abstract: The 35 paired diamond intergrowths of rounded colorless transparent and gray opaque crystals from the placers of northeastern Siberian Platform were investigated. Mineral inclusions (KFsp, Coe, E-Grt, Po) detected in studied samples belong to eclogitic paragenesis. The majority of studied samples have uniform ranges of nitrogen content (1126-1982 at. ppm) and carbon isotope composition (??16.8 to ??23.2 ‰). These characteristics pointing towards subducted material are possible sources for their genesis. Two samples consist of a gray opaque crystal with the subduction-related characteristics (?13C ca. ??21‰ and N ca. 1300 at. ppm) and a transparent crystal with low nitrogen content (412 and 29 at. ppm) and a heavy carbon isotopic composition (?13C ??4.2 and ??4.6‰) common for primary mantle range. The higher degree of nitrogen aggregation in the crystals with mantle-like characteristics testifies their longer storage in the mantle conditions. These samples reflect multistage diamond growth history and directly indicate the mixing of mantle and subduction carbon sources at the basement of subcontinental lithospheric mantle of northeastern Siberian Platform.
Contributions to Mineralogy and Petrology, Vol. 175, 106, 21p. Pdf
Russia
deposit - Nyurbinskaya
Abstract: We present a new dataset on the composition of high-density fluids (HDFs) in cloudy (n?=?25), coated (n?=?10) and cuboid (n?=?10) diamonds from the Nyurbinskaya kimberlite pipe. These diamonds represent different populations each showing distinct growth histories. The cores of coated diamonds display multiple growth stages and contrasting sources of carbon. Fibrous coats and cuboid diamonds have similar carbon isotopes and nitrogen systematics, suggesting their formation in the last metasomatic events related to kimberlite magmatism, as is common for most such diamonds worldwide. The HDFs in most of these diamonds span a wide range from low-Mg carbonatitic to hydrous silicic compositions. The major- and trace-element variations suggest that the sources for such HDFs range in composition between the depleted mantle and more fertile mantle reservoirs. Hydrous-silicic HDFs could originate from a 13C-enriched source, which originates through subduction of crustal metasedimentary material. Percolation of such HDFs through carbonated eclogites and peridotites facilitates the formation of cuboid diamonds and fibrous coats in the mantle section beneath the corresponding area of the Siberian craton. Cloudy diamonds represent an apparently older population, reflecting continuous diamond formation predominantly from high-Mg carbonatitic HDFs that caused discrete episodes of diamond precipitation. Their high Mg# and enrichment in incompatible elements support a metasomatized peridotitic source for these HDFs.
Buikin, A.I., Trieloff, M., Korochantseeva, E.V., Hopp, J., Kaliwood, M., Meyer, H-P.,Altherr, R.
Distribution of mantle and atmospheric argon in mantle xenoliths from western Arabian Peninsula: constraints on timing and composition of metasomatizing agents....
The diamonds and kimberlitic indicative minerals within the context of stratigraphy and source in Shefa Yamim drill SY-15, Pliocene-Pleistcene Qishon River Valley.
Geochemistry, Geophysics, Geosystems: G3, Vol. 17, 2, pp. 5036-5055.
Africa, Madagascar
Tectonics
Abstract: Accurate reconstructions of the dispersal of supercontinent blocks are essential for testing continental breakup models. Here, we provide a new plate tectonic reconstruction of the opening of the Western Somali Basin during the breakup of East and West Gondwana. The model is constrained by a new comprehensive set of spreading lineaments, detected in this heavily sedimented basin using a novel technique based on directional derivatives of free-air gravity anomalies. Vertical gravity gradient and free-air gravity anomaly maps also enable the detection of extinct mid-ocean ridge segments, which can be directly compared to several previous ocean magnetic anomaly interpretations of the Western Somali Basin. The best matching interpretations have basin symmetry around the M0 anomaly; these are then used to temporally constrain our plate tectonic reconstruction. The reconstruction supports a tight fit for Gondwana fragments prior to breakup, and predicts that the continent-ocean transform margin lies along the Rovuma Basin, not along the Davie Fracture Zone (DFZ) as commonly thought. According to our reconstruction, the DFZ represents a major ocean-ocean fracture zone formed by the coalescence of several smaller fracture zones during evolving plate motions as Madagascar drifted southwards, and offshore Tanzania is an obliquely rifted, rather than transform, margin. New seismic reflection evidence for oceanic crust inboard of the DFZ strongly supports these conclusions. Our results provide important new constraints on the still enigmatic driving mechanism of continental rifting, the nature of the lithosphere in the Western Somali Basin, and its resource potential.
Minerals MDPI, Vol. 10, 1084, doi:10.3390/ min10121084 10p. Pdf
Mantle
spectroscopy
Abstract: The composition of clinopyroxenes is indicative for chemical and physical properties of mantle substrates. In this study, we present the results of Raman spectroscopy examination of clinopyroxene inclusions in natural diamonds (n = 51) and clinopyroxenes from mantle xenoliths of peridotites and eclogites from kimberlites (n = 28). The chemical composition of studied clinopyroxenes shows wide variations indicating their origin in different mantle lithologies. All clinopyroxenes have intense Raman modes corresponding to metal-oxygen translation (~300-500 cm?1), stretching vibrations of bridging O-Si-Obr (?11~670 cm?1), and nonbridging atoms O-Si-Onbr (?16~1000 cm?1). The peak position of the stretching vibration mode (?11) for the studied clinopyroxenes varies in a wide range (23 cm?1) and generally correlates with their chemical composition and reflects the diopside-jadeite heterovalent isomorphism. These correlations may be used for rough estimation of these compounds using the non-destructive Raman spectroscopy technique.
Abstract: The results of study secondary crystallized melt inclusions in olivine of a sheared peridotite xenolith from the Komsomolskaya-Magnitnaya kimberlite pipe (Upper Muna field, Yakutia) are reported. Monticellite, phlogopite, tetraferriphlogopite KMg3(Fe3+)Si3O10(F,Cl,OH), apatite, aphthitalite K3Na(SO4)2, burkeite Na6CO3(SO4)2, and carbonates, namely calcite, nyerereite (Na,K)2Ca(CO3)2, shortite Na2Ca2(CO3)3, and eitelite Na2Mg(CO3)2, were detected among the daughter minerals of the melt inclusions by the method of confocal Raman spectroscopy. The abundance of alkali carbonates in the inclusions indicates the alkali-carbonate composition of the melt. Previously, identical inclusions of alkali-carbonate melt were reported in olivine of sheared peridotites from the Udachnaya pipe (Daldyn field). Melt inclusions in sheared peridotites are the relics of a crystallized kimberlite melt that penetrated into peridotites either during the transport of xenoliths to the surface or directly in the mantle shortly prior to the entrapment of xenoliths by the kimberlite magma. If the second scenario took place, the finds of alkali-carbonate melt inclusions in sheared peridotites carried from different mantle depths in the Udachnaya and Komsomolskaya-Magnitnaya kimberlite pipes indicate a large-scale metasomatic alteration of the lithospheric mantle of the Siberian Craton by alkaline-carbonate melts, which preceded the kimberlite magmatism. However, regardless of which of the two models proposed above is correct, the results reported here support the alkali-carbonate composition of primary kimberlite melts.
Abstract: Metamorphic petrology observations on rubies found in-situ in their host-rock are combined with geochemical measurements and optical microscopy observations on the same rubies, with the aim of connecting the ruby-forming metamorphic reaction to a unique fingerprint for these minerals. The Fiskenæsset complex in Greenland is used as an area of this case study. Isochemical pressure-temperature sections were calculated based on electron microprobe and whole-rock geochemistry analyses, and compared to field observations. Rubies formed from reaction between olivine/serpentine and anorthite, triggered by the intrusion of a 2.71 Ga pegmatite. Al is sourced from the anorthite reacting to calcic amphibole, silica from the pegmatite reacts with olivine/serpentine to anthophyllite, Cr3+ is mobile in the pegmatitic fluid, giving colour to the rubies. The ruby-forming reaction occurs at about 640 °C and 7 kbar. In order to establish the unique fingerprint for this ruby-bearing ultramafic complex, laser-ablation inductively-coupled-plasma mass-spectrometry trace-element measurements, oxygen isotope compositions, optical microscopy and scanning electron microscopy were applied. Due to the setting in an ultramafic rock-anorthosite-leucogabbro complex, the fingerprint of the rubies from the Fiskenæsset complex is rather unique. Compared to rubies from other localities, Fiskenæsset complex rubies contain high Cr, intermediate Fe, and low V, Ga, and Ti concentrations, low oxygen isotope values (1.6-4.2‰) and a rarely-observed combination of optical growth features and mineral inclusions like anthophyllite+biotite. Results for other Greenland localities are presented and discussed as well. Even though these are derived from ultramafic rock settings too, they record different trace-element ratios and oxygen isotope values, resulting from variations in the Archaean ruby-forming reaction.
Maeda, F., Ohtani, E., Kamada, S., Sakamaki, T., Ohishi, Y., Hirao, N.
The reactions in the MgCO3-SiO2 system in the slabs subducted into the lower mantle and formation of deep diamond.
V.S. Sobolev Institute of Geology and Mineralogy Siberian Branch Russian Academy of Sciences International Symposium Advances in high pressure research: breaking scales and horizons ( Courtesy of N. Poikilenko), Held Sept. 22-26, 1p. Abstract
Abstract: Diamond is an evidence for carbon existing in the deep Earth. Some diamonds are considered to have originated at various depth ranges from the mantle transition zone to the lower mantle. These diamonds are expected to carry significant information about the deep Earth. Here, we determined the phase relations in the MgCO3-SiO2 system up to 152?GPa and 3,100?K using a double sided laser-heated diamond anvil cell combined with in situ synchrotron X-ray diffraction. MgCO3 transforms from magnesite to the high-pressure polymorph of MgCO3, phase II, above 80?GPa. A reaction between MgCO3 phase II and SiO2 (CaCl2-type SiO2 or seifertite) to form diamond and MgSiO3 (bridgmanite or post-perovsktite) was identified in the deep lower mantle conditions. These observations suggested that the reaction of the MgCO3 phase II with SiO2 causes formation of super-deep diamond in cold slabs descending into the deep lower mantle.
Progress in Earth and Planetary Science, Vol. 7, 23, 7p. Pdf
Mantle
wustite
Abstract: The longitudinal sound velocity (VP) and the density (?) of wüstite, FeO, were measured at pressures of up to 112.3?GPa and temperatures of up to 1700?K using both inelastic X-ray scattering and X-ray diffraction combined with a laser-heated diamond-anvil cell. The linear relationship between VP and ?, Birch’s law, for wüstite can be expressed as VP = 1.55 (1) × ? [g/cm3] ? 2.03 (8) [km/s] at 300?K and VP = 1.61 (1) × ? [kg/m3] ? 2.82 (10) [km/s] at 1700?K. The sound velocity of wüstite is significantly lower than that of bridgmanite and ferropericlase under lower mantle conditions. In other words, the existence of wüstite in the lower mantle can efficiently decrease the seismic velocity. Considering its slow velocity and several mechanisms for the formation of FeO-rich regions at the core-mantle boundary, we confirm earlier suggestions indicating that wüstite enrichment at the bottom of the Earth’s mantle may contribute to the formation of denser ultra-low velocity zones.
Abstract: The abundance and distribution of halogens (F, Cl) are rarely recorded in kimberlites and therefore their petrogenetic significance is poorly constrained. Halogens are usually present in kimberlite rocks in the structure of phlogopite and apatite, but their original concentrations are never fully retained due to the effects of alteration. To provide new constraints on the origin and evolution of halogens in kimberlites and their melts, we present a detailed study of the petrography and geochemistry of the late-Cretaceous Group-I (or archetypal) Roger kimberlite (Ekati cluster, Canada). The studied samples contain abundant anhedral-to-euhedral olivine which is set in a crystalline groundmass of monticellite, phlogopite, apatite, spinel (i.e. magnesian ulvöspinel-magnetite (MUM), Mg-magnetite, pleonaste, Cr-spinel), and perovskite along with abundant secondary alteration phases (i.e. serpentine, garnet (andradite-schlorlomite), amakinite ((Fe2 +, Mg, Mn)(OH)2), calcite). The Roger kimberlite is characterised by the highest recorded F-content (up to 2688 ppm) of the Ekati cluster kimberlites, which is reflected by the preservation of F-rich phases, where bultfonteinite (Ca4(Si2O7)(F, OH)2) and fluorite commonly replace olivine. In order to examine the composition and evolution of the kimberlite melt prior to post-magmatic processes, we studied melt inclusions in olivine, Cr-spinel, monticellite and apatite. Primary multiphase melt inclusions in Cr-spinel, monticellite and apatite and secondary inclusions in olivine are shown to contain a diversity of daughter phases and compositions that are dominated by alkali/alkali-earth (Na, K, Ba, Sr)-enriched Ca-Mg-carbonates ± F, Na-K-chlorides and sulphates, phosphates ± REE, spinel, silicates (e.g. olivine, phlogopite, (clino)humite), and sulphides. Although alkali/alkali-earth- and halogen-bearing phases are abundant in melt inclusions, they are generally absent from the kimberlite groundmass, most likely due to ubiquitous effects of syn- and/or post-magmatic alteration (i.e. serpentinisation). Comparisons between halogens and other trace elements of similar compatibility (i.e. F/Nd and Cl/U) in the Roger kimberlite and their respective estimated primitive mantle abundances show that halogens should be a more significant component in kimberlites than typically measured. We propose that fluorine in the Roger kimberlite was magmatic and was redistributed during hydrothermal alteration by Ca-bearing serpentinising fluids to produce the observed bultfonteinite/fluorite assemblages. Based the compositions and daughter mineral assemblages in primary melt inclusions and reconstructed halogen abundances, we suggest that Cr-spinel, monticellite and apatite crystallised from a variably differentiated Si-P-Cl-F-bearing carbonate melt that was enriched in alkalis/alkali-earths and highly incompatible trace elements
Abstract: Monticellite is a magmatic and/or deuteric mineral that is often present, but widely varying in concentrations in Group-I (or archetypal) kimberlites. To provide new constraints on the petrogenesis of monticellite and its potential significance to kimberlite melt evolution, we examine the petrography and geochemistry of the minimally altered hypabyssal monticellite-rich Leslie (Canada) and Pipe 1 (Finland) kimberlites. In these kimberlites, monticellite (Mtc) is abundant (25–45 vol%) and can be classified into two distinct morphological types: discrete and intergrown groundmass grains (Mtc-I), and replacement of olivine (Mtc-II).
Monticellite in group-I kimberlites: Implications for evolution of parental melts and post-emplacement CO 2 degassing (PDF Download Available).
Abstract: It is now well established that the cratonic sub-continental lithospheric mantle (SCLM) represents a residue of extensively melted fertile peridotite. The widespread occurrence of garnet in the Archaean SCLM remains a paradox because many experiments agree that garnet is exhausted beyond c. 20% melting. It has been suggested that garnet may have formed by exsolution from Al-rich orthopyroxene [1,2,3]. However, the few examples of putative garnet exsolution in cratonic samples remain exotic and have not afforded a link to garnet that occurs as distinct grains in granular harzburgite. We present crystallographic (EBSD), petrographic and chemical (SEM-EDS and LA-ICP-MS) data for an exceptionally well-preserved orthopyroxene megacryst juxtaposed against granular harzburgite. Garnet lamellae within the megacryst show crystallographic continuity and have a strong fabric relative to the host orthopyroxene, strongly indicating that the megacryst formed by exsolution. Garnet lamellae are sub-calcic Cr-pyropes with sinusoidal rare earth element patterns, while the orthopyroxene host is high-Mg enstatite; the reconstructed precursor is clinoestatite. The megacryst shows evidence for disintegrating into granular peridotite, and garnet and orthopyroxene within the granular peridotite are texturally and chemically identical to equivalent phases in the megacryst. Collectively, this evidence supports a common origin for the granular and exsolved portions of the sample. The compositions of the exsolved Cr pyrope and enstatite are typical of harzburgites and depleted lherzolites from the SCLM. Furthermore, garnet inclusions within orthopyroxene in several granular peridotites exhibit the same fabric as those in the exsolved megacryst. We hypothesise that clinoenstatite was a common phase in cratonic SCLM and that exsolution is the likely origin of many sub-calcic garnets in depleted peridotites.
Majoritic garnet: a new approach to pressure estimation of shock events in meteorites and the encapsulation of sub-lithospheric inclusions in diamonds.
Geochimica et Cosmochimica Acta, Vol. 74, 20, pp. 5939-5937.
Abstract: Constraining the origin and history of very ancient detrital zircons has unique potential for furthering our knowledge of Earth's very early crust and Hadean geodynamics. Previous applications of the Ti-in-zircon thermometer to >4 Ga zircons have identified a population with relatively low crystallization temperatures (Tzirxtln) of ?685 °C. This could possibly indicate wet minimum-melting conditions producing granitic melts, implying very different Hadean terrestrial geology from that of other rocky planets. Here we report the first comprehensive ion microprobe study of zircons from a transect through the differentiated Sudbury impact melt sheet (Ontario, Canada). The new zircon Ti results and corresponding Tzirxtln fully overlap with those of the Hadean zircon population. Previous studies that measured Ti in impact melt sheet zircons did not find this wide range because they analyzed samples only from a restricted portion of the melt sheet and because they used laser ablation analyses that can overestimate true Ti content. It is important to note that internal differentiation of the impact melt is likely a prerequisite for the observed low Tzirxtln in zircons from the most evolved rocks. On Earth, melt sheet differentiation is strongest in subaqueous impact basins. Thus, not all Hadean detrital zircon with low Ti necessarily formed during melting at plate boundaries, but at least some could also have crystallized in melt sheets caused by intense meteorite bombardment of the early, hydrosphere-covered protocrust.
Geostandards and Geoanalytical Research, in press available
Technology
REE mass fractions
Abstract: Olivine offers huge, largely untapped, potential for improving our understanding of magmatic and metasomatic processes. In particular, a wealth of information is contained in rare earth element (REE) mass fractions, which are well studied in other minerals. However, REE data for olivine are scarce, reflecting the difficulty associated with determining mass fractions in the low ng g?1 range and with controlling the effects of LREE contamination. We report an analytical procedure for measuring REEs in olivine using laser ablation quadrupole-ICP-MS that achieved limits of determination (LOD) at sub-ng g?1 levels and biases of ~ 5-10%. Empirical partition coefficients (D values) calculated using the new olivine compositions agree with experimental values, indicating that the measured REEs are structurally bound in the olivine crystal lattice, rather than residing in micro-inclusions. We conducted an initial survey of REE contents of olivine from mantle, metamorphic, magmatic and meteorite samples. REE mass fractions vary from 0.1 to double-digit ng g?1 levels. Heavy REEs vary from low mass fractions in meteoritic samples, through variably enriched peridotitic olivine to high mass fractions in magmatic olivines, with fayalitic olivines showing the highest levels. The variable enrichment in HREEs demonstrates that olivine REE patterns have petrological utility.
Abstract: The most outstanding features of Archaean cratons are their extraordinary thickness and enduring longevity. Seismically, Archaean cratonic fragments are sharplybounded deep roots of buoyant cold lithospheric mantle, clearly distinguishable from non-cratonic lithosphere. The age of diamond inclusions and the Os-isotope composition of deep cratonic xenoliths support a model of coeval formation of the crustal and residual mantle portions. Archaean and post-Archaean crust also differ, not in bulk composition, but in crustal architecture. Key drivers of crustal rearrangment were the radioactive heat-producers U, Th and K. In the early Earth, high radioactive heat production led to self-organisation into evolved, potassic upper and refractory lower crust. The lag time between crust formation and reorganisation was much shorter than today. An additional factor contributing to cratonic restructuring was the emplacement of dense supracrustal rocks in ensialic greenstone belts, leading to gravitational inversion. The dome and keel architecture of Archaean cratons was thus driven by crustal radioactive heat and high temperature mantle melting, yielding dense, low viscosity lavas piling up at surface. A pleasing complementary observation from cratonic mantle roots is that refractory mantle nodules also suggest very high degrees of melting and extraction. Thus, the most logical conclusion seems that the komatiite mantle source was up to 500ºC hotter than modern asthenosphere. With higher degree and depth of melting, a thicker and severely depleted bouyant cratonic residue was formed, perfectly equipped to preserve the Archaean crustal record. However, there are significant inconsistencies in this otherwise convincing line of reasoning. They include: Archaean crust is not especially thick, the dunites expected after very high degree melting are rare, many cratonic harzburgites are much richer in orthopyroxene than predicted [1], and cratonic harzburgites often contain garnet. Finding a solution to these issues has important ramifications for secular evolution of the continents and thermal evolution of the mantle. In this presentation, I will contrast the various proposed solutions, including purging of surprisingly carbonated ancient mantle [e.g. 2], onset of plate tectonics, a Neoarchaean superplume event and collapse of Hadean cumulate barriers.
Geochimica et Cosmochinica Acta, Vol. 215, pp. 432-446.
Africa, Zimbabwe
craton
Abstract: Hafnium and oxygen isotopic compositions measured in-situ on U-Pb dated zircon from Archaean sedimentary successions belonging to the 2.9–2.8 Ga Belingwean/Bulawayan groups and previously undated Sebakwian Group are used to characterize the crustal evolution of the Zimbabwe Craton prior to 3.0 Ga. Microstructural and compositional criteria were used to minimize effects arising from Pb loss due to metamorphic overprinting and interaction with low-temperature fluids. 207Pb/206Pb age spectra (concordance >90%) reveal prominent peaks at 3.8, 3.6, 3.5, and 3.35 Ga, corresponding to documented geological events, both globally and within the Zimbabwe Craton. Zircon ?18O values from +4 to +10‰ point to both derivation from magmas in equilibrium with mantle oxygen and the incorporation of material that had previously interacted with water in near-surface environments. In ?Hf-time space, 3.8–3.6 Ga grains define an array consistent with reworking of a mafic reservoir (176Lu/177Hf ?0.015) that separated from chondritic mantle at ?3.9 Ga. Crustal domains formed after 3.6 Ga depict a more complex evolution, involving contribution from chondritic mantle sources and, to a lesser extent, reworking of pre-existing crust. Protracted remelting was not accompanied by significant mantle depletion prior to 3.35 Ga. This implies that early crust production in the Zimbabwe Craton did not cause complementary enriched and depleted reservoirs that were tapped by later magmas, possibly because the volume of crust extracted and stabilised was too small to influence (asthenospheric) mantle isotopic evolution. Growth of continental crust through pulsed emplacement of juvenile (chondritic mantle-derived) melts, into and onto the existing cratonic nucleus, however, involved formation of complementary depleted subcontinental lithospheric mantle since the early Archaean, indicative of strongly coupled evolutionary histories of both reservoirs, with limited evidence for recycling and lateral accretion of arc-related crustal blocks until 3.35 Ga.
Abstract: It is well established that the cratonic subcontinental lithospheric mantle (C-SCLM) represents a residue of extensively melted peridotite. The widespread occurrence of garnet in C-SCLM remains a paradox because experiments show that it should be exhausted beyond ?20% melting. It has been suggested that garnet may have formed by exsolution from Al-rich orthopyroxene; however, the few documented examples of garnet exsolution in cratonic samples are exotic and do not afford a direct link to garnet in granular harzburgite. We report crystallographic, petrographic, and chemical data for an exceptionally well preserved orthopyroxene megacryst containing garnet lamellae, juxtaposed against granular harzburgite. Garnet lamellae are homogeneously distributed within the host orthopyroxene and occur at an orientation that is unrelated to orthopyroxene cleavage, strongly indicating that they formed by exsolution. Garnet lamellae are subcalcic Cr-pyrope, and the orthopyroxene host is high-Mg enstatite; these phases equilibrated at 4.4 GPa and 975 °C. The reconstructed precursor is a high-Al enstatite that formed at higher pressure and temperature conditions of ?6 GPa and 1750 °C. The megacryst shows evidence for disintegrating into granular peridotite, and garnet and orthopyroxene within the granular peridotite are texturally and chemically identical to equivalent phases in the megacryst. Collectively, this evidence supports a common origin for the granular and exsolved portions of the sample. We hypothesize that high-Al enstatite was a common phase in the C-SCLM and that exsolution during cooling and stabilization of the C-SCLM could be the origin of most subcalcic garnets in depleted peridotites.
Abstract: The most outstanding features of Archaean cratons are their extraordinary thickness and enduring longevity. Seismically, Archaean cratonic fragments are sharply-bounded deep roots of mechanically strong, cold lithospheric mantle, clearly distinguishable from non-cratonic lithosphere. Rhenium-depletion of deep cratonic xenolith whole rocks and sulphide inclusions in diamond indicate that melting was broadly coeval with formation of the overlying proto-cratonic crust, which was of limited mechanical strength. A very important process of proto-cratonic development was vertical crustal reorganisation that eventually yielded a thermally stable, cratonised crust with a highly K-U-Th-rich uppermost crust and much more depleted deeper crust. Clastic sedimentary rocks available for geochemical study are predominantly found in the youngest parts of supracrustal stratigraphies and over-represent the highly evolved rocks that appeared during cratonisation. Vertical crustal reorganisation was driven by crustal radiogenic heat and emplacement of proto-craton-wide, incubating and dense supracrustal mafic and ultramafic volcanic rocks. Statistical analysis of these cover sequences shows a preponderance of basalt and a high abundance of ultramafic lavas with a dearth of picrite. The ultramafic lavas can be grouped into Ti-enriched and Ti-depleted types and high pressure and temperature experimental data indicate that the latter formed from previously depleted mantle at temperatures in excess of 1700?°C. Most mantle harzburgite xenoliths from cratonic roots are highly refractory, containing very magnesian olivine and many have a high modal abundance of orthopyroxene. High orthopyroxene mode is commonly attributed to metasomatic silica-enrichment or a non-pyrolitic mantle source but much of the excess silica requirement disappears if melting occurred at high pressures of 4-6?GPa. Analysis of experimental data demonstrates that melting of previously depleted harzburgite can yield liquids with highly variable Si/Mg ratios and low Al2O3 and FeO contents, as found in komatiites, and complementary high Cr/Al residues. In many harzburgites, there is an intimate spatial association of garnet and spinel with orthopyroxene, which indicates formation of the Al-phase by exsolution upon cooling and decompression. New and published rare earth element (REE) data for garnet and orthopyroxene show that garnet has inherited its sinusoidal REE pattern from the orthopyroxene. The lack of middle-REE depletion in these refractory residues is consistent with the lack of middle- over heavy-REE fractionation in most komatiites. This suggests that such pyroxene or garnet (or precursor phases) were present during komatiite melting. In the Kaapvaal craton, garnet exsolution upon significant cooling occurred as early as 3.2?Ga and geobarometry of diamond inclusions from ancient kimberlites also supports cool Archaean cratonic geotherms. This requires that some mantle roots have extended to 300 to possibly 400?km and that early cratons must have been much larger than 500?km in diameter. We maintain that the Archaean-Proterozoic boundary continues to be of geological significance, despite the recognition that upper crustal chemistry, as sampled by sedimentary rocks, became more evolved from ca. 3?Ga onwards. The boundary coincides with the disappearance of widespread komatiite and marks the end of formation of typical refractory cratonic lithosphere. This may signify a fundamental change in the thermal structure of the mantle after which upwellings no longer resulted in very high temperature perturbations. One school of thought is that the thermal re-ordering occurred at the core-mantle boundary whereas others envisage Archaean plumes to have originated at the base of the upper mantle. Here we speculate that Archaean cratonic roots may contain remnants of older domains of non-convecting mantle. These domains are potential carriers of isotope anomalies and their base could have constituted a mechanical and thermal boundary layer. Above laterally extensive barriers, emerging proto-cratons were protected from the main mantle heat loss. The eventual collapse of these mechanical barriers terminated very high temperature upwellings and dismembered portions of the barrier were incorporated into the cratonic mantle during the final Neoarchaean ‘superplume’ event. The surviving cratons may therefore preserve biased evidence of geological processes that operated during the Archaean.
Abstract: Human society's rapid release of vast quantities of CO2 into the atmosphere is a significant planetary experiment. An obvious natural process capable of similar emissions over geologically short time spans are very large bolide impacts. When striking a carbon-rich target, bolides significantly, and potentially catastrophically, disrupt the global biogeochemical carbon cycle. Independent factors, such as sulfur-rich targets, redox state of the oceans or encountering ecosystems already close to a tipping point, dictated the magnitude of further consequences and determined which large bolide strikes shaped Earth's evolution. On the early Earth, where carbon-rich sedimentary targets were rare, impacts may not have been purely destructive. Instead, enclosed subaqueous impact structures may have contributed to initiating Earth's unique carbon cycle.
Nature Communications, doi:101038/s41467- 021-21343-9 33p. Pdf
Mantle
craton
Abstract: Peridotites from the thick roots of Archaean cratons are known for their compositional diversity, whose origin remains debated. We report thermodynamic modelling results for reactions between peridotite and ascending mantle melts. Reaction between highly magnesian melt (komatiite) and peridotite leads to orthopyroxene crystallisation, yielding silica-rich harzburgite. By contrast, shallow basalt-peridotite reaction leads to olivine enrichment, producing magnesium-rich dunites that cannot be generated by simple melting. Komatiite is spatially and temporally associated with basalt within Archaean terranes indicating that modest-degree melting co-existed with advanced melting. We envisage a relatively cool mantle that experienced episodic hot upwellings, the two settings could have coexisted if roots of nascent cratons became locally strongly extended. Alternatively, deep refractory silica-rich residues could have been detached from shallower dunitic lithosphere prior to cratonic amalgamation. Regardless, the distinct Archaean melting-reaction environments collectively produced skewed and multi-modal olivine distributions in the cratonic lithosphere and bimodal mafic-ultramafic volcanism at surface.
Brazil Journal of Geology, Vol. 44, 1, pp. 91-103.
South America, Brazil
Coromandel district
Abstract: The diamond bearing district of Coromandel is located in the northwestern part of Minas Gerais, within the Alto Paranaíba Arch, famous for the discovery of most of Brazil's large diamonds above 100 ct. Detailed mapping, aimed at characterizing the Mata da Corda Group of Upper Cretaceous age of Coromandel, has been carried out. This Group was divided into the Patos Formation, composed of kimberlitic and kamafugitic rocks, and the Capacete Formation, presented by conglomerates, pyroclastic rocks, arenite and tuffs. Exposures of the latter Formation have been studied in detail at the small abandoned mine called Canastrel, as well as in the headwater of Santo Antônio do Bonito River. The results have been compared to studies of the kimberlite bodies in the nearby Douradinho River. Kimberlite indicator minerals from these localities show the same compositional trend. Moreover, in the basal conglomerate of the Garimpo Canastrel two diamonds diamonds have been recovered and described. The Garimpo Wilson, situated in the headwater of the river Santo Antônio do Bonito in paleo-alluvium, is composed of material exclusively derived from the erosion of the Capacete Formation and Precambrian (sterile) Canastra quartzites and schists. These detailed investigations suggest that the basal conglomerates of the Capacete Formation represent the main source rock of the alluvial diamond deposits in the Coromandel region.
Brazil Journal of Geology, Vol. 44, 2, pp. 325-338.
South America, Brazil, Minas Gerais
Deposit - Coromandel
Abstract: Important diamond deposits southeast of Coromandel and the local geology have been studied in an attempt to understand what surface source provided the stones. River gravels of Pleistocene to Recent age from this region have supplied most of Brazil’s large diamonds over 100 ct. The upper cretaceous Capacete Formation of the Mata da Corda Group, composed of mafic volcanoclastic, pyroclastic and epiclastic material, has been worked locally for diamonds, nevertheless considered non-economic. The authors present results of their study of a deactivated small mine, representing the first report with description and analyses of two gem diamonds washed from this material. Hundreds of kimberlites, discovered in the last half century in the region, are sterile or non-economic. We propose that the surface source of the diamonds is the Capacete “conglomerado”. The volume of this material is enormous representing a potential resource for large-scale mining. The authors suggest detailed studies of the volcanic facies of this unit focusing on the genesis, distribution and diamond content. As to the question concerning the origin of these diamondiferous pyroclastic rocks, the authors exclude the kimberlites and point towards the large Serra Negra and Salitre alkaline complexes which are considered the primary source for the pyroclastic units of the Mata da Corda Group. They propose that early eruptive phases of this alkaline complex brought diamonds from a mantle source to the surface, much as happens with traditional kimberlites, to explain the association of such huge carbonatite complexes and diamonds.
Dongre, A., Kamde, G., Chalapathi Rao, N.V., Kale, H.S.
Is megacrystic/xenocrystic ilmenite entrainment in the source magma responsible for the non-Diamondiferous nature of the Maddur-Kotakonda-Narayanpet kimberlites
Geological Society of India, Bangalore November Meeting Group Discussion on Kimberlites and Related Rocks India, Abstract p. 72.
Abstract: The abundance and distribution of halogens (F, Cl) are rarely recorded in kimberlites and therefore their petrogenetic significance is poorly constrained. Halogens are usually present in kimberlite rocks in the structure of phlogopite and apatite, but their original concentrations are never fully retained due to the effects of alteration. To provide new constraints on the origin and evolution of halogens in kimberlites and their melts, we present a detailed study of the petrography and geochemistry of the late-Cretaceous Group-I (or archetypal) Roger kimberlite (Ekati cluster, Canada). The studied samples contain abundant anhedral-to-euhedral olivine which is set in a crystalline groundmass of monticellite, phlogopite, apatite, spinel (i.e. magnesian ulvöspinel-magnetite (MUM), Mg-magnetite, pleonaste, Cr-spinel), and perovskite along with abundant secondary alteration phases (i.e. serpentine, garnet (andradite-schlorlomite), amakinite ((Fe2 +, Mg, Mn)(OH)2), calcite). The Roger kimberlite is characterised by the highest recorded F-content (up to 2688 ppm) of the Ekati cluster kimberlites, which is reflected by the preservation of F-rich phases, where bultfonteinite (Ca4(Si2O7)(F, OH)2) and fluorite commonly replace olivine. In order to examine the composition and evolution of the kimberlite melt prior to post-magmatic processes, we studied melt inclusions in olivine, Cr-spinel, monticellite and apatite. Primary multiphase melt inclusions in Cr-spinel, monticellite and apatite and secondary inclusions in olivine are shown to contain a diversity of daughter phases and compositions that are dominated by alkali/alkali-earth (Na, K, Ba, Sr)-enriched Ca-Mg-carbonates ± F, Na-K-chlorides and sulphates, phosphates ± REE, spinel, silicates (e.g. olivine, phlogopite, (clino)humite), and sulphides. Although alkali/alkali-earth- and halogen-bearing phases are abundant in melt inclusions, they are generally absent from the kimberlite groundmass, most likely due to ubiquitous effects of syn- and/or post-magmatic alteration (i.e. serpentinisation). Comparisons between halogens and other trace elements of similar compatibility (i.e. F/Nd and Cl/U) in the Roger kimberlite and their respective estimated primitive mantle abundances show that halogens should be a more significant component in kimberlites than typically measured. We propose that fluorine in the Roger kimberlite was magmatic and was redistributed during hydrothermal alteration by Ca-bearing serpentinising fluids to produce the observed bultfonteinite/fluorite assemblages. Based the compositions and daughter mineral assemblages in primary melt inclusions and reconstructed halogen abundances, we suggest that Cr-spinel, monticellite and apatite crystallised from a variably differentiated Si-P-Cl-F-bearing carbonate melt that was enriched in alkalis/alkali-earths and highly incompatible trace elements
Abstract: Monticellite is a magmatic and/or deuteric mineral that is often present, but widely varying in concentrations in Group-I (or archetypal) kimberlites. To provide new constraints on the petrogenesis of monticellite and its potential significance to kimberlite melt evolution, we examine the petrography and geochemistry of the minimally altered hypabyssal monticellite-rich Leslie (Canada) and Pipe 1 (Finland) kimberlites. In these kimberlites, monticellite (Mtc) is abundant (25–45 vol%) and can be classified into two distinct morphological types: discrete and intergrown groundmass grains (Mtc-I), and replacement of olivine (Mtc-II).
Monticellite in group-I kimberlites: Implications for evolution of parental melts and post-emplacement CO 2 degassing (PDF Download Available).
Abstract: The abundance and distribution of halogens (F, Cl) are rarely recorded in kimberlites and therefore their petrogenetic significance is poorly constrained. Halogens are usually present in kimberlite rocks in the structure of phlogopite and apatite, but their original concentrations are never fully retained due to the effects of alteration. To provide new constraints on the origin and evolution of halogens in kimberlites and their melts, we present a detailed study of the petrography and geochemistry of the late-Cretaceous Group-I (or archetypal) Roger kimberlite (Ekati cluster, Canada). The studied samples contain abundant anhedral-to-euhedral olivine which is set in a crystalline groundmass of monticellite, phlogopite, apatite, spinel (i.e. magnesian ulvöspinel-magnetite (MUM), Mg-magnetite, pleonaste, Cr-spinel), and perovskite along with abundant secondary alteration phases (i.e. serpentine, garnet (andradite-schlorlomite), amakinite ((Fe2 +, Mg, Mn)(OH)2), calcite). The Roger kimberlite is characterised by the highest recorded F-content (up to 2688 ppm) of the Ekati cluster kimberlites, which is reflected by the preservation of F-rich phases, where bultfonteinite (Ca4(Si2O7)(F, OH)2) and fluorite commonly replace olivine. In order to examine the composition and evolution of the kimberlite melt prior to post-magmatic processes, we studied melt inclusions in olivine, Cr-spinel, monticellite and apatite. Primary multiphase melt inclusions in Cr-spinel, monticellite and apatite and secondary inclusions in olivine are shown to contain a diversity of daughter phases and compositions that are dominated by alkali/alkali-earth (Na, K, Ba, Sr)-enriched Ca-Mg-carbonates ± F, Na-K-chlorides and sulphates, phosphates ± REE, spinel, silicates (e.g. olivine, phlogopite, (clino)humite), and sulphides. Although alkali/alkali-earth- and halogen-bearing phases are abundant in melt inclusions, they are generally absent from the kimberlite groundmass, most likely due to ubiquitous effects of syn- and/or post-magmatic alteration (i.e. serpentinisation). Comparisons between halogens and other trace elements of similar compatibility (i.e. F/Nd and Cl/U) in the Roger kimberlite and their respective estimated primitive mantle abundances show that halogens should be a more significant component in kimberlites than typically measured. We propose that fluorine in the Roger kimberlite was magmatic and was redistributed during hydrothermal alteration by Ca-bearing serpentinising fluids to produce the observed bultfonteinite/fluorite assemblages. Based the compositions and daughter mineral assemblages in primary melt inclusions and reconstructed halogen abundances, we suggest that Cr-spinel, monticellite and apatite crystallised from a variably differentiated Si-P-Cl-F-bearing carbonate melt that was enriched in alkalis/alkali-earths and highly incompatible trace elements.
Abstract: Monticellite is a magmatic and/or deuteric mineral that is often present, but widely varying in concentrations in Group-I (or archetypal) kimberlites. To provide new constraints on the petrogenesis of monticellite and its potential significance to kimberlite melt evolution, we examine the petrography and geochemistry of the minimally altered hypabyssal monticellite-rich Leslie (Canada) and Pipe 1 (Finland) kimberlites. In these kimberlites, monticellite (Mtc) is abundant (25-45 vol%) and can be classified into two distinct morphological types: discrete and intergrown groundmass grains (Mtc-I), and replacement of olivine (Mtc-II). Primary multiphase melt inclusions in monticellite, perovskite and Mg-magnetite contain assemblages dominated by alkali (Na, K, Ba, Sr)-enriched Ca-Mg-carbonates, chlorides, phosphates, spinel, silicates (e.g. olivine, phlogopite) and sulphides. These melt inclusions probably represent snapshots of a variably differentiated kimberlite melt that evolved in-situ towards carbonatitic and silica-poor compositions. Although unconstrained in their concentration, the presence of alkali-carbonates and chlorides in melt inclusions suggests they are a more significant component of the kimberlite melt than commonly recorded by whole-rock analyses. We present petrographic and textural evidence showing that pseudomorphic Mtc-II resulted from an in-situ reaction between olivine and the carbonate component of the kimberlite melt in the decarbonation reactio. This reaction is supported by the preservation of abundant primary inclusions of periclase and to a lesser extent Fe-Mg-oxides in monticellite, perovskite and Mg-magnetite. Based on the preservation of primary periclase inclusions, we infer that periclase also existed in the groundmass, but was subsequently altered to brucite. We suggest that CO2 degassing in the latter stages of kimberlite emplacement into the crust is largely driven by the observed reaction between olivine and the carbonate melt. For this reaction to proceed, CO2 should be removed (i.e. degassed), which will cause further reaction and additional degassing in response to this chemical system change (Le Chatelier's principle). Our study demonstrates that these proposed decarbonation reactions may be a commonly overlooked process in the crystallisation of monticellite and exsolution of CO2, which may in turn contribute to the explosive eruption and brecciation processes that occur during kimberlite magma emplacement and pipe formation.
Abstract: The petrologically unique Udachnaya-East kimberlite (Siberia, Russia) is characterised by unserpentinised and H2O-poor volcaniclastic and coherent units that contain fresh olivine, along with abundant alkali-rich carbonates, chlorides, sulphides and sulphates in the groundmass. These mineralogical and geochemical characteristics have led to two divergent models that advocate different origins. It has been suggested that the unserpentinised units from Udachnaya-East are representative of pristine unaltered kimberlite. Conversely, the alkali-chlorine-sulphur enrichment has been attributed to interactions with crustal materials and/or post-emplacement contamination by brines. The mineralogical and geochemical features and the compositions of melt inclusions in unserpentinised and serpentinised Udachnaya-East kimberlite varieties are compared in this study. Both varieties of kimberlite have similar major, compatible and incompatible trace element concentrations and primitive mantle normalised trace element patterns, groundmass textures and silicate, oxide and sulphide mineral compositions. However, these two kimberlite varieties are distinguished by: (i) the presence of unaltered olivine, abundant Na-K-Cl-S-rich minerals (i.e. chlorides, S-bearing alkali-carbonates, sodalite) and the absence of H2O-rich phases (i.e. serpentine, iowaite (Mg4Fe3+(OH)8OCl•3(H2O)) in unserpentinised samples, and (ii) the absence of alkali- and chlorine-enriched phases in the groundmass and characteristic olivine alteration (i.e. replacement by serpentine and/or iowaite) in serpentinised samples. In addition, melt inclusions hosted in olivine, monticellite, spinel and perovskite from unserpentinised and serpentinised kimberlite contain identical daughter phase assemblages that are dominated by alkali-carbonates, chlorides and sulphates/sulphides. This enrichment in alkalis, chlorine and sulphur in melt inclusions demonstrates that these elements were an intrinsic part of the parental magma. The paucity of alkali-carbonates and chlorides in the groundmass of serpentinised Udachnaya-East kimberlite is attributed to their instability and removal during post-emplacement alteration. All evidence previously used in support of crustal and brine contamination of the Udachnaya-East kimberlite is thoroughly evaluated. We demonstrate that ‘contamination models’ are inconsistent with petrographic, geochemical and melt inclusion data. Our combined data suggest that the Udachnaya-East kimberlite crystallised from an essentially H2O-poor, Si-Na-K-Cl-S-bearing carbonate-rich melt.
Abstract: The Benfontein kimberlite is a renowned example of a sill complex and provides an excellent opportunity to examine the emplacement and evolution of intrusive kimberlite magmas. We have undertaken a detailed petrographic and melt inclusion study of the Benfontein Upper, Middle and Lower sills. These sills range in thickness from 0.25 to 5?m. New perovskite and baddeleyite U/Pb dating produced ages of 85.7?±?4.4?Ma and 86.5?±?2.6?Ma, respectively, which are consistent with previous age determinations and indicate emplacement coeval with other kimberlites of the Kimberley cluster. The Benfontein sills are characterised by large variations in texture (e.g., layering) and mineral modal abundance between different sill levels and within individual samples. The Lower Sill is characterised by carbonate-rich diapirs, which intrude into oxide-rich layers from underlying carbonate-rich levels. The general paucity of xenogenic mantle material in the Benfontein sills is attributed to its separation from the host magma during flow differentiation during lateral spreading. The low viscosity is likely responsible for non-explosive emplacement of the Benfontein sills, while the rhythmic layering is attributed to multiple magma injections. The Benfontein sills are marked by the excellent preservation of olivine and groundmass mineralogy, which is composed of monticellite, spinel, perovskite, baddeleyite, ilmenite, apatite, calcite, dolomite along with secondary serpentine and glagolevite [NaMg6[Si3AlO10](OH,O)8•H2O]. This is the first time glagolevite is reported in kimberlites. Groundmass spinel exhibits atoll-textures and is composed of a magnesian ulvöspinel magnetite (MUM) or chromite core, surrounded by occasional pleonaste and a rim of Mg-Al-magnetite. We suggest that pleonaste crystallised as a magmatic phase, but was resorbed back into the residual host melt and/or removed by alteration. Analyses of secondary inclusions in olivine and primary inclusions in monticellite, spinel, perovskite, apatite and interstitial calcite are largely composed of Ca-Mg carbonates and, to a lesser extent, alkali-carbonates and other phases. These inclusions probably represent the entrapment of variably differentiated parental kimberlite melts, which became progressively more enriched in carbonate, alkalis, halogens and sulphur during crystal fractionation. Carbonate-rich diapirs from the Lower Sill contain more exotic phase assemblages (e.g., Ba-Fe titanate, barite, ancylite, pyrochlore), which probably result from the extreme differentiation of residual kimberlite melts followed by physical separation and isolation from the parental carbonate-rich magma. It is likely that any alkali or halogen rich minerals crystallising in the groundmass were removed from the groundmass during syn?/post-magmatic alteration, or in the case of Na, remobilised to form secondary glagolevite. The Benfontein sill complex therefore provides a unique example of how the composition of kimberlites may be modified after magma emplacement in the upper crust.
Abstract: The Benfontein kimberlite is a renowned example of a sill complex and provides an excellent opportunity to examine the emplacement and evolution of intrusive kimberlite magmas. We have undertaken a detailed petrographic and melt inclusion study of the Benfontein Upper, Middle and Lower sills. These sills range in thickness from 0.25 to 5?m. New perovskite and baddeleyite U/Pb dating produced ages of 85.7?±?4.4?Ma and 86.5?±?2.6?Ma, respectively, which are consistent with previous age determinations and indicate emplacement coeval with other kimberlites of the Kimberley cluster. The Benfontein sills are characterised by large variations in texture (e.g., layering) and mineral modal abundance between different sill levels and within individual samples. The Lower Sill is characterised by carbonate-rich diapirs, which intrude into oxide-rich layers from underlying carbonate-rich levels. The general paucity of xenogenic mantle material in the Benfontein sills is attributed to its separation from the host magma during flow differentiation during lateral spreading. The low viscosity is likely responsible for non-explosive emplacement of the Benfontein sills, while the rhythmic layering is attributed to multiple magma injections. The Benfontein sills are marked by the excellent preservation of olivine and groundmass mineralogy, which is composed of monticellite, spinel, perovskite, baddeleyite, ilmenite, apatite, calcite, dolomite along with secondary serpentine and glagolevite [NaMg6[Si3AlO10](OH,O)8•H2O]. This is the first time glagolevite is reported in kimberlites. Groundmass spinel exhibits atoll-textures and is composed of a magnesian ulvöspinel - magnetite (MUM) or chromite core, surrounded by occasional pleonaste and a rim of Mg-Al-magnetite. We suggest that pleonaste crystallised as a magmatic phase, but was resorbed back into the residual host melt and/or removed by alteration. Analyses of secondary inclusions in olivine and primary inclusions in monticellite, spinel, perovskite, apatite and interstitial calcite are largely composed of Ca-Mg carbonates and, to a lesser extent, alkali-carbonates and other phases. These inclusions probably represent the entrapment of variably differentiated parental kimberlite melts, which became progressively more enriched in carbonate, alkalis, halogens and sulphur during crystal fractionation. Carbonate-rich diapirs from the Lower Sill contain more exotic phase assemblages (e.g., Ba-Fe titanate, barite, ancylite, pyrochlore), which probably result from the extreme differentiation of residual kimberlite melts followed by physical separation and isolation from the parental carbonate-rich magma. It is likely that any alkali or halogen rich minerals crystallising in the groundmass were removed from the groundmass during syn?/post-magmatic alteration, or in the case of Na, remobilised to form secondary glagolevite. The Benfontein sill complex therefore provides a unique example of how the composition of kimberlites may be modified after magma emplacement in the upper crust.
Contributions to Mineralogy and Petrology, Vol. 174, 8 22p.
Africa, South Africa, Russia, Canada, Northwest Territories
deposit - Bultfontein, Roberts Victor, Udachnaya-East, Obnazhennaya, Vtorogodnitsa, Koala, Leslie
Abstract: Djerfisherite (K6(Fe,Ni,Cu)25S26Cl) occurs as an accessory phase in the groundmass of many kimberlites, kimberlite-hosted mantle xenoliths, and as a daughter inclusion phase in diamonds and kimberlitic minerals. Djerfisherite typically occurs as replacement of pre-existing Fe-Ni-Cu sulphides (i.e. pyrrhotite, pentlandite and chalcopyrite), but can also occur as individual grains, or as poikilitic phase in the groundmass of kimberlites. In this study, we present new constraints on the origin and genesis of djerfisherite in kimberlites and their entrained xenoliths. Djerfisherite has extremely heterogeneous compositions in terms of Fe, Ni and Cu ratios. However, there appears to be no distinct compositional range of djerfisherite indicative of a particular setting (i.e. kimberlites, xenoliths or diamonds), rather this compositional diversity reflects the composition of the host kimberlite melt and/or interacting metasomatic medium. In addition, djerfisherite may contain K and Cl contents less than the ideal formula unit. Raman spectroscopy and electron backscatter diffraction (EBSD) revealed that these K-Cl poor sulphides still maintain the same djerfisherite crystal structure. Two potential mechanisms for djerfisherite formation are considered: (1) replacement of pre-existing Fe-Ni-Cu sulphides by djerfisherite, which is attributed to precursor sulphides reacting with metasomatic K-Cl bearing melts/fluids in the mantle or the transporting kimberlite melt; (2) direct crystallisation of djerfisherite from the kimberlite melt in groundmass or due to kimberlite melt infiltration into xenoliths. The occurrence of djerfisherite in kimberlites and its mantle cargo from localities worldwide provides strong evidence that the metasomatising/infiltrating kimberlite melt/fluid was enriched in K and Cl. We suggest that kimberlites originated from melts that were more enriched in alkalis and halogens relative to their whole-rock compositions.
Abstract: Kimberlites are the surface manifestation of deeply-derived (>150 km) and rapidly ascended magmas. Fresh kimberlite rocks are exceptionally rare, as most of them are invariably modified by pervasive deuteric and/or post-magmatic fluids that overprint the original mineralogy. In this study, we examined fresh archetypal kimberlite from the Mark pipe (Lac de Gras, Canada), which is characterised by well-preserved olivine and groundmass minerals. The sequence of crystallisation of the parental melt and its major compositional features, including oxygen fugacity, were reconstructed using textural relationships between magmatic minerals, their zoning patterns and crystal/melt/fluid inclusions. Crystal and multiphase primary, pseudosecondary and secondary melt/fluid inclusions in olivine, Cr-diopside, spinel, perovskite, phlogopite/kinoshitalite, apatite and calcite preserve a record of different stages of kimberlite melt evolution. Melt/fluid inclusions are generally more depleted in silica and more enriched in alkalis (K, Na), alkali-earth (Ba, Sr) and halogens (Cl, F) relative to the whole-rock composition of the Mark kimberlite. These melt/fluid inclusion compositions, in combination with presence of elevated CaO (up to 1.73 wt%), in Mg-rich olivine rinds, crystallisation of groundmass kinoshitalite, carbonates (calcite, Sr-Ba-bearing) and alkali-enriched rims around apatite suggest that there was progressive enrichment in CO2, alkalis and halogens in the evolving parental melt. The Mark kimberlite groundmass is characterised by the following stages of in-situ crystallisation: (1) olivine rims around xenocrystic cores + Cr-spinel/TIMAC. (2) Mg-rich olivine rinds around olivine rims/cores + MUM-spinel (followed by pleonaste and Mg-magnetite) + monticellite (+ partial resorption of olivine, along with the formation of ferropericlase and CO2 as a result of decarbonation reactions) + perovskite + apatite. (3) Olivine outmost rinds, which are coeval with phlogopite/kinoshitalite + apatite + sulphides + carbonate (calcite, Ba-Sr-Na-bearing varieties). In addition, oxygen fugacity of the Mark kimberlite was constrained by olivine-chromite, perovskite and monticellite oxygen barometry and showed that the parental melt became progressively more oxidised in response to fractional crystallisation. (4) Deuteric (i.e. late-stage magmatic) and/or post-magmatic (i.e. external fluids) alteration of magmatic minerals (e.g., olivine, monticellite, ferropericlase) and crystallisation of mesostasis serpentine, K-bearing chlorite and brucite (i.e. replacement of ferropericlase). The absence of any alkali (Na, K) and halogen (F, Cl) rich groundmass minerals in the Mark kimberlite may be attributed to these elements becoming concentrated in the late-stage melt where they potentially formed unstable, water-soluble carbonates (such as those observed in melt inclusions). Consequently, these minerals were most likely removed from the groundmass by deuteric and/or post-magmatic alteration.
Abstract: A set of small volcanic edifices with tuff ring and maar morphologies occur in the Catanda area, which is the only locality with extrusive carbonatites reported in Angola. Four outcrops of carbonatite lavas have been identified in this region and considering the mineralogical, textural and compositional features, we classify them as: silicocarbonatites (1), calciocarbonatites (2) and secondary calciocarbonatites produced by the alteration of primary natrocarbonatites (3). Even with their differences, we interpret these lava types as having been a single carbonatite suite related to the same parental magma. We have also estimated the composition of the parental magma from a study of melt inclusions hosted in magnetite microphenocrysts from all of these lavas. Melt inclusions revealed the presence of 13 different alkali-rich phases (e.g., nyerereite, shortite, halite and sylvite) that argues for an alkaline composition of the Catanda parental melts. Mineralogical, textural, compositional and isotopic features of some Catanda lavas are also similar to those described in altered natrocarbonatite localities worldwide such as Tinderet or Kerimasi, leading to our conclusion that the formation of some Catanda calciocarbonatite lavas was related to the occurrence of natrocarbonatite volcanism in this area. On the other hand, silicocarbonatite lavas, which are enriched in periclase, present very different mineralogical, compositional and isotopic features in comparison to the rest of Catanda lavas. We conclude that its formation was probably related to the decarbonation of primary dolomite bearing carbonatites.
Abstract: The formation of platinum-group minerals (PGM) during magma differentiation has been suggested to be an important process in primitive magma evolution, but decisive textural evidence is difficult to obtain because PGM tend to be very small and very rare. We have investigated Cr-spinel phenocrysts from two oxidized magmas (Siberian meimechite and Vanuatu [Ambae Island] arc picrite) and one reduced magma (Uralian [Russia] ankaramite) for PGM inclusions and their platinum-group element (PGE) contents. We observed Os-Ir and Pt-Fe alloys entrapped as inclusions in Cr-spinel in all three suites of lava. The alloys may occur in association with PGE-bearing sulfides and co-trapped silicate melt. Cr-spinel crystals also contain measurable amounts of Os, Ir, Ru, and Rh, which are at concentrations 2×–100× higher than mantle values. Thermodynamic models indicate that the arc picrite and ankaramite melts were probably both saturated with the observed PGM phases, whereas the Os-Ir alloy grain observed in the meimechite is not in equilibrium with the “bulk” melt. Our results demonstrate that PGM (alloys and sulfides) occur as liquidus phases in primitive (unfractionated) melts at high temperature and at a variety of redox conditions, and that Cr-spinel is a significant host of PGE, either in the crystal structure or as PGM inclusions.
Abstract: Magmas forming large igneous provinces (LIP) on continents are generated by extensive melting in the deep crust and underlying mantle and associated with break-up of ancient supercontinents, followed by formation of a new basaltic crust in the mid-oceanic rifts. A lack of the unifying model in understanding the sources of LIP magmatism is justified by lithological and geochemical complexity of erupted magmas on local (e.g. a cross-section) and regional (a single and different LIP) scales. Moreover, the majority of LIP rocks do not fit general criteria for recognizing primary/primitive melts (i.e. < 8 wt% MgO and absence of high-Fo olivine phenocrysts). This study presents the mineralogical (olivine, Cr-spinel, orthopyroxene), geochemical (trace elements and Sr-Nd-Hf-Pb isotopes) and olivine-hosted melt inclusion compositional characteristics of a single primitive (16 wt% MgO), high-Ti (2.5 wt% TiO2) picrite with high-Mg olivine (up to 91 mol% Fo) from the Letaba Formation in the ~ 180 Ma Karoo LIP (south Africa). The olivine compositions (unusually high ?18O (6.17‰), high NiO (0.36-0.56 wt%) and low MnO and CaO (0.12-0.20 and 0.12-0.22 wt%, respectively)) are used to argue for a non-peridotitic mantle source. This is supported by the enrichment of the rock and melts in most incompatible trace elements and depletion in heavy rare earth elements (e.g. high Gd/Yb) that reflects residual garnet in the source of melting. The radiogenic isotopes resemble those of the model enriched mantle (EM-1) and further argue for a long-term enrichment of the source in incompatible trace elements. The enriched high-Ti compositions, strongly fractionated incompatible trace elements, presence of primitive olivine and high-Cr spinel in the Letaba picrites are closely matched by olivine-phyric rocks from the ~ 260 Ma Emeishan (Yongsheng area, SW China) and ~ 250 Ma Siberian (Maimecha-Kotuy region, N Siberia) LIPs. However, many other compositional parameters (e.g. trace element and ?18O compositions of olivine phenocrysts, Fe2 +/Fe3 + in Cr-spinel, Sr-Nd-Hf isotope ratios) only partially overlap or even diverge. We thus imply that parental melts of enriched picritic rocks with forsteritic olivine from three major continental igneous provinces - Karoo, Emeishan and Siberia cannot be assigned to a common mantle source and similar melting conditions. The Karoo picrites also exhibit some mineralogical and geochemical similarities with rocks and glasses in the south Atlantic Ridge and adjacent fracture zones. The geodynamic reconstructions of the continental plate motions since break-up of the Gondwanaland in the Jurassic support the current position of the source of the Karoo magmatism in the southernmost Atlantic. Co-occurrence of modern and recent anomalous rocks with normal mid-ocean ridge basalts in this region can be related to blocks/rafts of the ancient lithosphere, stranded in the ambient upper mantle and occasionally sampled by rifting-related decompressional melting.
Abstract: Magmas forming large igneous provinces (LIP) on continents are generated by extensive melting in the deep crust and underlying mantle and associated with break-up of ancient supercontinents, followed by formation of a new basaltic crust in the mid-oceanic rifts. A lack of the unifying model in understanding the sources of LIP magmatism is justified by lithological and geochemical complexity of erupted magmas on local (e.g. a cross-section) and regional (a single and different LIP) scales. Moreover, the majority of LIP rocks do not fit general criteria for recognizing primary/primitive melts (i.e. < 8 wt% MgO and absence of high-Fo olivine phenocrysts). This study presents the mineralogical (olivine, Cr-spinel, orthopyroxene), geochemical (trace elements and Sr-Nd-Hf-Pb isotopes) and olivine-hosted melt inclusion compositional characteristics of a single primitive (16 wt% MgO), high-Ti (2.5 wt% TiO2) picrite with high-Mg olivine (up to 91 mol% Fo) from the Letaba Formation in the ~ 180 Ma Karoo LIP (south Africa). The olivine compositions (unusually high ?18O (6.17‰), high NiO (0.36–0.56 wt%) and low MnO and CaO (0.12–0.20 and 0.12–0.22 wt%, respectively)) are used to argue for a non-peridotitic mantle source. This is supported by the enrichment of the rock and melts in most incompatible trace elements and depletion in heavy rare earth elements (e.g. high Gd/Yb) that reflects residual garnet in the source of melting. The radiogenic isotopes resemble those of the model enriched mantle (EM-1) and further argue for a long-term enrichment of the source in incompatible trace elements. The enriched high-Ti compositions, strongly fractionated incompatible trace elements, presence of primitive olivine and high-Cr spinel in the Letaba picrites are closely matched by olivine-phyric rocks from the ~ 260 Ma Emeishan (Yongsheng area, SW China) and ~ 250 Ma Siberian (Maimecha-Kotuy region, N Siberia) LIPs. However, many other compositional parameters (e.g. trace element and ?18O compositions of olivine phenocrysts, Fe2 +/Fe3 + in Cr-spinel, Sr-Nd-Hf isotope ratios) only partially overlap or even diverge. We thus imply that parental melts of enriched picritic rocks with forsteritic olivine from three major continental igneous provinces – Karoo, Emeishan and Siberia cannot be assigned to a common mantle source and similar melting conditions. The Karoo picrites also exhibit some mineralogical and geochemical similarities with rocks and glasses in the south Atlantic Ridge and adjacent fracture zones. The geodynamic reconstructions of the continental plate motions since break-up of the Gondwanaland in the Jurassic support the current position of the source of the Karoo magmatism in the southernmost Atlantic. Co-occurrence of modern and recent anomalous rocks with normal mid-ocean ridge basalts in this region can be related to blocks/rafts of the ancient lithosphere, stranded in the ambient upper mantle and occasionally sampled by rifting-related decompressional melting.
Contributions to Mineralogy and Petrology, Vol. 175, 13p. Pdf
Russia
perovskite
Abstract: The exceptional accumulation of perovskite in the alkaline-ultramafic Afrikanda complex (Kola Peninsula, Russia) led to the study of polymineralic inclusions hosted in perovskite and magnetite to understand the development of the perovskite-rich zones in the olivinites, clinopyroxenites and silicocarbonatites. The abundance of inclusions varies across the three perovskite textures, with numerous inclusions hosted in the fine-grained equigranular perovskite, fewer inclusions in the coarse-grained interlocked perovskite and rare inclusions in the massive perovskite. A variety of silicate, carbonate, sulphide, phosphate and oxide phases are assembled randomly and in variable proportions in the inclusions. Our observations reveal that the inclusions are not bona fide melt inclusions. We propose that the inclusions represent material trapped during subsolidus sintering of magmatic perovskite. The continuation of the sintering process resulted in the coarsening of inclusion-rich subhedral perovskite into inclusion-poor anhedral and massive perovskite. These findings advocate the importance of inclusion studies for interpreting the origin of oxide minerals and their associated economic deposits and suggest that the formation of large scale accumulations of minerals in other oxide deposits may be a result of annealing of individual disseminated grains.
Abstract: Sulfide liquids that immiscibly separate from silicate melts in different magmatic processes accumulate chalcophile metals and may represent important sources of the metals in Earth's crust for the formation of ore deposits. Sulfide phases commonly found in some primitive mid-ocean ridge basalts (MORB) may support the occurrence of sulfide immiscibility in the crust without requiring magma contamination and/or extensive fractionation. However, the records of incipient sulfide melts in equilibrium with primitive high-Mg olivine and Cr-spinel are scarce. Sulfide globules in olivine phenocrysts in picritic rocks of MORB-affinity at Kamchatsky Mys (Eastern Kamchatka, Russia) represent a well-documented example of natural immiscibility in primitive oceanic magmas. Our study examines the conditions of silicate-sulfide immiscibility in these magmas by reporting high precision data on the compositions of Cr-spinel and silicate melt inclusions, hosted in Mg-rich olivine (86.9-90 mol% Fo), which also contain globules of magmatic sulfide melt. Major and trace element contents of reconstructed parental silicate melts, redox conditions (?QFM = +0.1 ± 0.16 (1?) log. units) and crystallization temperature (1200-1285 °C), as well as mantle potential temperatures (~1350 °C), correspond to typical MORB values. We show that nearly 50% of sulfur could be captured in daughter sulfide globules even in reheated melt inclusions, which could lead to a significant underestimation of sulfur content in reconstructed silicate melts. The saturation of these melts in sulfur appears to be unrelated to the effects of melt crystallization and crustal assimilation, so we discuss the reasons for the S variations in reconstructed melts and the influence of pressure and other parameters on the SCSS (Sulfur Content at Sulfide Saturation).
Trace element geochemistry of myerereite and gregoyryite phenocrysts from natrocarbonatite lava, Oldoinyo-Lengai, Tanzania: implications for magma mixing.
An oxygen fugacity profile through the Siberian craton - Fe K-edge XANES determinations of Fe3 Fe in garnets in peridotite xenoliths from the Udachnaya East kimberlite.
Giuliani, A., Kamenetsky, V.S., Kendrick, M.A., Phillips, D., Wyatt, B.A., Maas, R.
Oxide, sulphide and carbonate minerals in a mantle polymict breccia: metasomatism by proto-kimberlite magmas, and relationship to the kimberlite megacrystic suite.
Chrome spinel hosted melt inclusions in Paleoproterozoic primitive volcanic rocks, northern Finland: evidence for coexistence and mixing of komatiitic and picritic magmas.
Relationships between oxygen fugacity and metasomatism in the Kaapvaal subcratonic mantle, represented by garnet peridotite xenoliths in the Wesselton kimberlite, South Africa.
Abstract: A set of small volcanic edifices with tuff ring and maar morphologies occur in the Catanda area, which is the only locality with extrusive carbonatites reported in Angola. Four outcrops of carbonatite lavas have been identified in this region and considering the mineralogical, textural and compositional features, we classify them as: silicocarbonatites (1), calciocarbonatites (2) and secondary calciocarbonatites produced by the alteration of primary natrocarbonatites (3). Even with their differences, we interpret these lava types as having been a single carbonatite suite related to the same parental magma. We have also estimated the composition of the parental magma from a study of melt inclusions hosted in magnetite microphenocrysts from all of these lavas. Melt inclusions revealed the presence of 13 different alkali-rich phases (e.g., nyerereite, shortite, halite and sylvite) that argues for an alkaline composition of the Catanda parental melts. Mineralogical, textural, compositional and isotopic features of some Catanda lavas are also similar to those described in altered natrocarbonatite localities worldwide such as Tinderet or Kerimasi, leading to our conclusion that the formation of some Catanda calciocarbonatite lavas was related to the occurrence of natrocarbonatite volcanism in this area. On the other hand, silicocarbonatite lavas, which are enriched in periclase, present very different mineralogical, compositional and isotopic features in comparison to the rest of Catanda lavas. We conclude that its formation was probably related to the decarbonation of primary dolomite bearing carbonatites.
Abstract: Mantle-derived carbonatites are igneous rocks dominated by carbonate minerals. Intrusive carbonatites typically contain calcite and, less commonly, dolomite and siderite as the only carbonate minerals. In contrast, lavas erupted by the only active carbonatite volcano on Earth, Oldoinyo Lengai, Tanzania, are enriched in Na-rich carbonate phenocrysts (nyerereite and gregoryite) and Na-K halides in the groundmass. The apparent paradox between the compositions of intrusive and extrusive carbonatites has not been satisfactorily resolved. This study records the fortuitous preservation of halite in the intrusive dolomitic carbonatite of the St.-Honoré carbonatite complex (Québec, Canada), more than 490 m below the present surface. Halite occurs intergrown with, and included in, magmatic minerals typical of intrusive carbonatites; i.e., dolomite, calcite, apatite, rare earth element fluorocarbonates, pyrochlore, fluorite, and phlogopite. Halite is also a major daughter phase of melt inclusions hosted in early magmatic minerals, apatite and pyrochlore. The carbon isotope composition of dolomite (?13C = –5.2‰) and Sr-Nd isotope compositions of individual minerals (87Sr/86Sri = 0.70287 in apatite, to 0.70443 in halite; ?Nd = +3.2 to +4.0) indicate a mantle origin for the St.-Honoré carbonatite parental melt. More radiogenic Sr compositions of dolomite and dolomite-hosted halite and heavy oxygen isotope composition of dolomite (?18O = +23‰) suggest their formation at some time after magma emplacement by recrystallization of original magmatic components in the presence of ambient fluids. Our observations indicate that water-soluble chloride minerals, common in the modern natrocarbonatite lavas, can be significant but ephemeral components of intrusive carbonatite complexes. We therefore infer that the parental magmas that produce primary carbonatite melts might be enriched in Na and Cl. This conclusion affects existing models for mantle source compositions, melting scenarios, temperature, rheological properties, and crystallization path of carbonatite melts.
Abstract: The formation of platinum-group minerals (PGM) during magma differentiation has been suggested to be an important process in primitive magma evolution, but decisive textural evidence is difficult to obtain because PGM tend to be very small and very rare. We have investigated Cr-spinel phenocrysts from two oxidized magmas (Siberian meimechite and Vanuatu [Ambae Island] arc picrite) and one reduced magma (Uralian [Russia] ankaramite) for PGM inclusions and their platinum-group element (PGE) contents. We observed Os-Ir and Pt-Fe alloys entrapped as inclusions in Cr-spinel in all three suites of lava. The alloys may occur in association with PGE-bearing sulfides and co-trapped silicate melt. Cr-spinel crystals also contain measurable amounts of Os, Ir, Ru, and Rh, which are at concentrations 2×–100× higher than mantle values. Thermodynamic models indicate that the arc picrite and ankaramite melts were probably both saturated with the observed PGM phases, whereas the Os-Ir alloy grain observed in the meimechite is not in equilibrium with the “bulk” melt. Our results demonstrate that PGM (alloys and sulfides) occur as liquidus phases in primitive (unfractionated) melts at high temperature and at a variety of redox conditions, and that Cr-spinel is a significant host of PGE, either in the crystal structure or as PGM inclusions.
Abstract: Kimberlite magmas are of economic and scientific importance because they represent the major host to diamonds and are probably the deepest magmas from continental regions. In addition, kimberlite magmas transport abundant mantle and crustal xenoliths, thus providing fundamental information on the composition of the sub-continental lithosphere. Despite their importance, the composition and ascent mechanism(s) of kimberlite melts remain poorly constrained. Phlogopite is one of the few minerals that preserves a history of fluid migration and magmatism in the mantle and crust and is therefore an invaluable petrogenetic indicator of kimberlite magma evolution. Here we present major and trace element compositional data for phlogopite from the Bultfontein kimberlite (Kimberley, South Africa; i.e. the kimberlite type-locality) and from entrained mantle xenoliths. Phlogopite macrocrysts (~ > 0.3-0.5 mm) and microcrysts (between ~ 0.1 and 0.3 mm) in the Bultfontein kimberlite display concentric compositional zoning patterns. The cores of these phlogopite grains exhibit compositions typical of phlogopite contained in peridotite mantle xenoliths. However, the rims of some grains show compositions analogous to kimberlite groundmass phlogopite (i.e. high Ti, Al and Ba; low Cr), whereas other rims and intermediate zones (between cores and rims) exhibit unusually elevated Cr and lower Al and Ba concentrations. The latter compositions are indistinguishable from matrix phlogopite in polymict breccia xenoliths (considered to represent failed kimberlite intrusions) and from Ti-rich overgrowth rims on phlogopite in other mantle xenoliths. Consequently, it is likely that these phlogopite grains crystallized from kimberlite melts and that the high Ti-Cr zones originated from earlier kimberlite melts at mantle depths. We postulate that successive pulses of ascending kimberlite magma progressively metasomatised the conduit along which later kimberlite pulses ascended, producing progressively decreasing interaction with the surrounding mantle rocks. In our view, these processes represent the fundamental mechanism of kimberlite magma ascent. Our study also indicates that, in addition to xenoliths/xenocrysts and magmatic phases, kimberlite rocks incorporate material crystallized at various mantle depths by previous kimberlite intrusions (mantle-derived ‘antecrysts’).
Abstract: The lack of consensus on the possible range of initial kimberlite melt compositions and their evolution as they ascend through and interact with mantle and crustal wall rocks, hampers a complete understanding of kimberlite petrogenesis. Attempts to resolve these issues are complicated by the fact that kimberlite rocks are mixtures of magmatic, xenocrystic and antecrystic components and, hence, are not directly representative of their parental melt composition. Furthermore, there is a lack of direct evidence of the assimilation processes that may characterise kimberlitic melts during ascent, which makes understanding their melt evolution difficult. In this contribution we provide novel constraints on the interaction between precursor kimberlite melts and lithospheric mantle wall rocks. We present detailed textural and geochemical data for a carbonate-rich vein assemblage that traverses a garnet wehrlite xenolith [equilibrated at ~ 1060 °C and 43 kbar (~ 140-145 km)] from the Bultfontein kimberlite (Kimberley, South Africa). This vein assemblage is dominated by Ca-Mg carbonates, with subordinate oxide minerals, olivine, sulphides, and apatite. Vein phases have highly variable compositions indicating formation under disequilibrium conditions. Primary inclusions in the vein minerals and secondary inclusion trails in host wehrlite minerals contain abundant alkali-bearing phases (e.g., Na-K bearing carbonates, Mg-freudenbergite, Na-bearing apatite and phlogopite). The Sr-isotope composition of vein carbonates overlaps those of groundmass calcite from the Bultfontein kimberlite, as well as perovskite from the other kimberlites in the Kimberley area. Clinopyroxene and garnet in the host wehrlite are resorbed and have Si-rich reaction mantles where in contact with the carbonate-rich veins. Within some veins, the carbonates occur as droplet-like, globular segregations, separated from a similarly shaped Si-rich phase by a thin meniscus of Mg-magnetite. These textures are interpreted to represent immiscibility between carbonate and silicate melts. The preservation of reaction mantles, immiscibility textures and disequilibrium in the vein assemblage, suggests quenching, probably triggered by entrainment and rapid transport toward the Earth's surface in the host kimberlite magma. Based on the Sr-isotope systematics of vein carbonate minerals, and the close temporal relationship between carbonate-rich metasomatism and kimberlite magmatism, we suggest that the carbonate-rich vein assemblage was produced by the interaction between a melt genetically related to the Bultfontein kimberlite and wehrlitic mantle wall rock. If correct, this unique xenolith sample provides a rare snapshot of the assimilation processes that might characterise parental kimberlite melts during their ascent through the lithospheric mantle.
Abstract: A dike -vein complex of potassic type of alkalinity recently discovered in the Baikal ledge, western Baikal area, southern Siberian craton, includes calcite and dolomite -ankerite carbonatites, silicate-bearing carbonatite, phlogopite metapicrite, and phoscorite. The most reliable 40Ar -39Ar dating of the rocks on magnesioriebeckite from alkaline metasomatite at contact with carbonatite yields a statistically significant plateau age of 1017.4 ± 3.2 Ma. The carbonatite is characterized by elevated SiO2 concentrations and is rich in K2O (K2O/Na2O ratio is 21 on average for the calcite carbonatite and 2.5 for the dolomite -ankerite carbonatite), TiO2, P2O5 (up to 9 wt %), REE (up to 3300 ppm), Nb (up to 400 ppm), Zr (up to 800 ppm), Fe, Cr, V, Ni, and Co at relatively low Sr concentrations. Both the metapicrite and the carbonatite are hundreds of times or even more enriched in Ta, Nb, K, and LREE relative to the mantle and are tens of times richer in Rb, Ba, Zr, Hf, and Ti. The high (Gd/Yb)CN ratios of the metapicrite (4.5 -11) and carbonatite (4.5 -17) testify that their source contained residual garnet, and the high K2O/Na2O ratios of the metapicrite (9 -15) and carbonatite suggest that the source also contained phlogopite. The Nd isotopic ratios of the carbonatite suggest that the mantle source of the carbonatite was mildly depleted and similar to an average OIB source. The carbonatites of various mineral composition are believed to be formed via the crystallization differentiation of ferrocarbonatite melt, which segregated from ultramafic alkaline melt.
Abstract: Kimberlitic magmaclasts are discrete ovoid magmatic fragments that formed prior to emplacement from disrupted kimberlite magma. To provide new constraints on the origin and evolution of the kimberlite melts, we document the mineralogy and petrography of a magmaclast recovered from one of the ca. 520 Ma Venetia kimberlites, South Africa. The sample (BI9883) has a sub-spherical shape and consists of a ~ 10 mm diameter central olivine macrocryst, surrounded by porphyritic kimberlite. The kimberlitic material consists of concentrically aligned, altered olivine phenocrysts, set in a crystalline groundmass of calcite, chromite, perovskite, phlogopite, apatite, ilmenite, titanite, sulphides, rutile and magnetite along with abundant alteration phases (i.e. serpentine, talc and secondary calcite). These features are typical of archetypal hypabyssal kimberlites. We examined primary fluid/melt inclusions in chromite, perovskite and apatite containing a diversity of daughter phases. Chromite and perovskite host polycrystalline inclusions containing abundant alkali-carbonates (i.e. enriched in K, Na, Ba, Sr), phosphates, Na-K chlorides, sulphides and equal to lesser quantities of olivine, phlogopite and pleonaste. In contrast, apatite hosts polycrystalline assemblages with abundant alkali-carbonates and Na-K chlorides and lesser amounts of olivine, monticellite and phlogopite. Numerous solid inclusions of shortite (Na2Ca2(CO3)3), Na-Sr-carbonates and apatite occur in groundmass calcite along with fluid inclusions containing daughter crystals of Na-carbonates and Na-chlorides. The primary inclusions in chromite, perovskite and apatite are considered to represent remnants of fluid(s)/melt(s) trapped during crystallisation of the host minerals, whereas the fluid inclusions in calcite are probably secondary in origin. The component proportions of these primary fluid/melt inclusions were estimated in an effort to constrain the composition of the evolving kimberlite melt. These estimates suggest melt evolution from a silicate-carbonate kimberlite melt that became increasingly enriched in carbonates, phosphates, alkalis and chlorides, in response to the fractional crystallisation of constituent minerals (i.e. olivine to apatite). The concentric alignment of crystals around the olivine kernel and ovoid shape of the magmaclast can be ascribed to the low viscosity of the kimberlite melt and rapid rotation whilst in a liquid or partial crystalline state, or to progressive layer-by-layer growth of the magmaclast. Although the mineralogy of our sample is similar to hypabyssal kimberlites worldwide, it differs from hypabyssal kimberlite units in the main Venetia pipes, which contain monticellite-phlogopite rich assemblages and segregationary matrix textures. Therefore magmaclast BI9883 probably originated from a batch of magma distinct from those that produced known hypabyssal units within the Venetia kimberlite cluster.-
Abstract: Magmas forming large igneous provinces (LIP) on continents are generated by extensive melting in the deep crust and underlying mantle and associated with break-up of ancient supercontinents, followed by formation of a new basaltic crust in the mid-oceanic rifts. A lack of the unifying model in understanding the sources of LIP magmatism is justified by lithological and geochemical complexity of erupted magmas on local (e.g. a cross-section) and regional (a single and different LIP) scales. Moreover, the majority of LIP rocks do not fit general criteria for recognizing primary/primitive melts (i.e. < 8 wt% MgO and absence of high-Fo olivine phenocrysts). This study presents the mineralogical (olivine, Cr-spinel, orthopyroxene), geochemical (trace elements and Sr-Nd-Hf-Pb isotopes) and olivine-hosted melt inclusion compositional characteristics of a single primitive (16 wt% MgO), high-Ti (2.5 wt% TiO2) picrite with high-Mg olivine (up to 91 mol% Fo) from the Letaba Formation in the ~ 180 Ma Karoo LIP (south Africa). The olivine compositions (unusually high ?18O (6.17‰), high NiO (0.36-0.56 wt%) and low MnO and CaO (0.12-0.20 and 0.12-0.22 wt%, respectively)) are used to argue for a non-peridotitic mantle source. This is supported by the enrichment of the rock and melts in most incompatible trace elements and depletion in heavy rare earth elements (e.g. high Gd/Yb) that reflects residual garnet in the source of melting. The radiogenic isotopes resemble those of the model enriched mantle (EM-1) and further argue for a long-term enrichment of the source in incompatible trace elements. The enriched high-Ti compositions, strongly fractionated incompatible trace elements, presence of primitive olivine and high-Cr spinel in the Letaba picrites are closely matched by olivine-phyric rocks from the ~ 260 Ma Emeishan (Yongsheng area, SW China) and ~ 250 Ma Siberian (Maimecha-Kotuy region, N Siberia) LIPs. However, many other compositional parameters (e.g. trace element and ?18O compositions of olivine phenocrysts, Fe2 +/Fe3 + in Cr-spinel, Sr-Nd-Hf isotope ratios) only partially overlap or even diverge. We thus imply that parental melts of enriched picritic rocks with forsteritic olivine from three major continental igneous provinces - Karoo, Emeishan and Siberia cannot be assigned to a common mantle source and similar melting conditions. The Karoo picrites also exhibit some mineralogical and geochemical similarities with rocks and glasses in the south Atlantic Ridge and adjacent fracture zones. The geodynamic reconstructions of the continental plate motions since break-up of the Gondwanaland in the Jurassic support the current position of the source of the Karoo magmatism in the southernmost Atlantic. Co-occurrence of modern and recent anomalous rocks with normal mid-ocean ridge basalts in this region can be related to blocks/rafts of the ancient lithosphere, stranded in the ambient upper mantle and occasionally sampled by rifting-related decompressional melting.
Abstract: Oldoinyo Lengai is situated within the Gregory Rift Valley (northern Tanzania) and is the only active volcano erupting natrocarbonatite lava. This study investigates the texture and mineralogy of the June 1993 lava at Oldoinyo Lengai, and presents petrographic evidence of liquid immiscibility between silicate, carbonate, chloride, and fluoride melt phases. The 1993 lava is a porphyritic natrocarbonatite consisting of abundant phenocrysts of alkali carbonates, nyerereite and gregoryite, set in a quenched groundmass, composed of sodium carbonate, khanneshite, Na-sylvite and K-halite, and a calcium fluoride phase. Dispersed in the lava are silicate spheroids (< 2 mm) with a cryptocrystalline silicate mineral assemblage wrapped around a core mineral. We have identified several textural features preserved in the silicate spheroids, melt inclusions, and carbonatite groundmass that exhibit evidence of silicate-carbonate, carbonate-carbonate and carbonate-halide immiscibility. Rapid quenching of the lava facilitated the preservation of the end products of these liquid immiscibility processes within the groundmass. Textural evidence (at both macro- and micro-scales) indicates that the silicate, carbonate, chloride and fluoride phases of the lava unmixed at different stages of evolution in the magmatic system.
Doklady Earth Sciences, Vol. 471, 1, pp. 1140-1143.
Russia
Carbonatite
Abstract: Apatite and biotite from dolomite?ankerite and calcite?dolomite carbonatite dikes emplaced into the Paleoproterozoic metamorphic rock complex in the southern part of the Siberian Craton are dated by the U-Pb (LA-ICP-MS) and 40Ar-39Ar methods, respectively. Proceeding from the lower intercept of discordia with concordia, the age of apatite from calcite?dolomite carbonatite is estimated to be 972 ± 21 Ma and that for apatite from dolomite?ankerite carbonatite, as 929 ± 37 Ma. Values derived from their upper intercept have no geological sense. The ages obtained for biotite by the 40Ar-39Ar method are 965 ± 9 and 975 ± 14 Ma. It means that the formation of carbonatites reflects the earliest phases of the Neoproterozoic stage in extension of the continental lithosphere.
Abstract: The extent to which water and halogens in Earth’s mantle have primordial origins, or are dominated by seawater-derived components introduced by subduction is debated. About 90% of non-radiogenic xenon in the Earth’s mantle has a subducted atmospheric origin, but the degree to which atmospheric gases and other seawater components are coupled during subduction is unclear. Here we present the concentrations of water and halogens in samples of magmatic glasses collected from mid-ocean ridges and ocean islands globally. We show that water and halogen enrichment is unexpectedly associated with trace element signatures characteristic of dehydrated oceanic crust, and that the most incompatible halogens have relatively uniform abundance ratios that are different from primitive mantle values. Taken together, these results imply that Earth’s mantle is highly processed and that most of its water and halogens were introduced by the subduction of serpentinized lithospheric mantle associated with dehydrated oceanic crust.
Abstract: Kimberlitic magmaclasts are discrete ovoid magmatic fragments that formed prior to emplacement from disrupted kimberlite magma. To provide new constraints on the origin and evolution of the kimberlite melts, we document the mineralogy and petrography of a magmaclast recovered from one of the ca. 520 Ma Venetia kimberlites, South Africa. The sample (BI9883) has a sub-spherical shape and consists of a ~ 10 mm diameter central olivine macrocryst, surrounded by porphyritic kimberlite. The kimberlitic material consists of concentrically aligned, altered olivine phenocrysts, set in a crystalline groundmass of calcite, chromite, perovskite, phlogopite, apatite, ilmenite, titanite, sulphides, rutile and magnetite along with abundant alteration phases (i.e. serpentine, talc and secondary calcite). These features are typical of archetypal hypabyssal kimberlites. We examined primary fluid/melt inclusions in chromite, perovskite and apatite containing a diversity of daughter phases. Chromite and perovskite host polycrystalline inclusions containing abundant alkali-carbonates (i.e. enriched in K, Na, Ba, Sr), phosphates, Na-K chlorides, sulphides and equal to lesser quantities of olivine, phlogopite and pleonaste. In contrast, apatite hosts polycrystalline assemblages with abundant alkali-carbonates and Na-K chlorides and lesser amounts of olivine, monticellite and phlogopite. Numerous solid inclusions of shortite (Na2Ca2(CO3)3), Na-Sr-carbonates and apatite occur in groundmass calcite along with fluid inclusions containing daughter crystals of Na-carbonates and Na-chlorides. The primary inclusions in chromite, perovskite and apatite are considered to represent remnants of fluid(s)/melt(s) trapped during crystallisation of the host minerals, whereas the fluid inclusions in calcite are probably secondary in origin. The component proportions of these primary fluid/melt inclusions were estimated in an effort to constrain the composition of the evolving kimberlite melt. These estimates suggest melt evolution from a silicate-carbonate kimberlite melt that became increasingly enriched in carbonates, phosphates, alkalis and chlorides, in response to the fractional crystallisation of constituent minerals (i.e. olivine to apatite). The concentric alignment of crystals around the olivine kernel and ovoid shape of the magmaclast can be ascribed to the low viscosity of the kimberlite melt and rapid rotation whilst in a liquid or partial crystalline state, or to progressive layer-by-layer growth of the magmaclast. Although the mineralogy of our sample is similar to hypabyssal kimberlites worldwide, it differs from hypabyssal kimberlite units in the main Venetia pipes, which contain monticellite-phlogopite rich assemblages and segregationary matrix textures. Therefore magmaclast BI9883 probably originated from a batch of magma distinct from those that produced known hypabyssal units within the Venetia kimberlite cluster.
Abstract: The petrogenesis of kimberlites is commonly obscured by interaction with hydrothermal fluids, including deuteric (late-magmatic) and/or groundwater components. To provide new constraints on the modification of kimberlite rocks during fluid interaction and the fractionation of kimberlite magmas during crystallisation, we have undertaken a detailed petrographic and geochemical study of a hypabyssal sample (BK) from the Bultfontein kimberlite (Kimberley, South Africa). Sample BK consists of abundant macrocrysts (> 1 mm) and (micro-) phenocrysts of olivine and lesser phlogopite, smaller grains of apatite, serpentinised monticellite, spinel, perovskite, phlogopite and ilmenite in a matrix of calcite, serpentine and dolomite. As in kimberlites worldwide, BK olivine grains consist of cores with variable Mg/Fe ratios, overgrown by rims that host inclusions of groundmass phases (spinel, perovskite, phlogopite) and have constant Mg/Fe, but variable Ni, Mn and Ca concentrations. Primary multiphase inclusions in the outer rims of olivine and in Fe-Ti-rich (‘MUM’) spinel are dominated by dolomite, calcite and alkali carbonates with lesser silicate and oxide minerals. Secondary inclusions in olivine host an assemblage of Na-K carbonates and chlorides. The primary inclusions are interpreted as crystallised alkali-Si-bearing Ca-Mg-rich carbonate melts, whereas secondary inclusions host Na-K-rich C-O-H-Cl fluids. In situ Sr-isotope analyses of groundmass calcite and perovskite reveal similar 87Sr/86Sr ratios to perovskite in the Bultfontein and the other Kimberley kimberlites, i.e. magmatic values. The ?18O composition of the BK bulk carbonate fraction is above the mantle range, whereas the ?13C values are similar to those of mantle-derived magmas. The occurrence of different generations of serpentine and occasional groundmass calcite with high 87Sr/86Sr, and elevated bulk carbonate ?18O values indicate that the kimberlite was overprinted by hydrothermal fluids, which probably included a significant groundwater component. Before this alteration the groundmass included calcite, monticellite, apatite and minor dolomite, phlogopite, spinel, perovskite and ilmenite. Inclusions of groundmass minerals in olivine rims and phlogopite phenocrysts show that olivine and phlogopite also belong to the magmatic assemblage. We therefore suggest that the crystallised kimberlite was produced by an alkali-bearing, phosphorus-rich, silica-dolomitic melt. The alkali-Si-bearing Ca-Mg-rich carbonate compositions of primary melt inclusions in the outer rims of olivine and in spinel grains with evolved compositions (MUM spinel) support formation of these melts after fractionation of abundant olivine, and probably other phases (e.g., ilmenite and chromite). Finally, the similarity between secondary inclusions in kimberlite olivine of this and other worldwide kimberlites and secondary inclusions in minerals of carbonatitic, mafic and felsic magmatic rocks, suggests trapping of residual Na-K-rich C-O-H-Cl fluids after groundmass crystallisation. These residual fluids may have persisted in pore spaces within the largely crystalline BK groundmass and subsequently mixed with larger volumes of external fluids, which triggered serpentine formation and localised carbonate recrystallisation.
Abstract: Magmas forming large igneous provinces (LIP) on continents are generated by extensive melting in the deep crust and underlying mantle and associated with break-up of ancient supercontinents, followed by formation of a new basaltic crust in the mid-oceanic rifts. A lack of the unifying model in understanding the sources of LIP magmatism is justified by lithological and geochemical complexity of erupted magmas on local (e.g. a cross-section) and regional (a single and different LIP) scales. Moreover, the majority of LIP rocks do not fit general criteria for recognizing primary/primitive melts (i.e. < 8 wt% MgO and absence of high-Fo olivine phenocrysts). This study presents the mineralogical (olivine, Cr-spinel, orthopyroxene), geochemical (trace elements and Sr-Nd-Hf-Pb isotopes) and olivine-hosted melt inclusion compositional characteristics of a single primitive (16 wt% MgO), high-Ti (2.5 wt% TiO2) picrite with high-Mg olivine (up to 91 mol% Fo) from the Letaba Formation in the ~ 180 Ma Karoo LIP (south Africa). The olivine compositions (unusually high ?18O (6.17‰), high NiO (0.36–0.56 wt%) and low MnO and CaO (0.12–0.20 and 0.12–0.22 wt%, respectively)) are used to argue for a non-peridotitic mantle source. This is supported by the enrichment of the rock and melts in most incompatible trace elements and depletion in heavy rare earth elements (e.g. high Gd/Yb) that reflects residual garnet in the source of melting. The radiogenic isotopes resemble those of the model enriched mantle (EM-1) and further argue for a long-term enrichment of the source in incompatible trace elements. The enriched high-Ti compositions, strongly fractionated incompatible trace elements, presence of primitive olivine and high-Cr spinel in the Letaba picrites are closely matched by olivine-phyric rocks from the ~ 260 Ma Emeishan (Yongsheng area, SW China) and ~ 250 Ma Siberian (Maimecha-Kotuy region, N Siberia) LIPs. However, many other compositional parameters (e.g. trace element and ?18O compositions of olivine phenocrysts, Fe2 +/Fe3 + in Cr-spinel, Sr-Nd-Hf isotope ratios) only partially overlap or even diverge. We thus imply that parental melts of enriched picritic rocks with forsteritic olivine from three major continental igneous provinces – Karoo, Emeishan and Siberia cannot be assigned to a common mantle source and similar melting conditions. The Karoo picrites also exhibit some mineralogical and geochemical similarities with rocks and glasses in the south Atlantic Ridge and adjacent fracture zones. The geodynamic reconstructions of the continental plate motions since break-up of the Gondwanaland in the Jurassic support the current position of the source of the Karoo magmatism in the southernmost Atlantic. Co-occurrence of modern and recent anomalous rocks with normal mid-ocean ridge basalts in this region can be related to blocks/rafts of the ancient lithosphere, stranded in the ambient upper mantle and occasionally sampled by rifting-related decompressional melting.
Abstract: Most eclogitic mantle xenoliths brought to the surface exhibit a certain degree of enrichment with incompatible elements, usually attributed to the effect of mantle metasomatism by a putative metasomatic fluid. The metasomatic overprint is represented mainly by enrichments in Na, K, Ba, Ti and LREE and the original source of this fluid remains unknown. In this paper, we present a detailed petrological study of a typical eclogitic mantle xenolith from the Roberts Victor kimberlite mine in South Africa. We find that its textural and mineralogical features present strong evidence for incipient melting. The melting assemblage we observe did not necessarily require introduction of additional components, that is: in-situ melting alone could produce highly incompatible element enriched melt without involvement of a hypothetical and speculative “metasomatic event”. Due to the higher abundance in incompatible elements and lower solidus temperature than peridotites, mantle eclogites, some of which represent previously subducted oceanic crust, are much more plausible sources of mantle metasomatism, but on the other hand, they can be considered as highly metasomatised themselves. This brings us to the “chicken or egg” dilemma – was the secondary mineral assemblage in mantle lithologies a result or a source of mantle metasomatism?
Abstract: Oldoinyo Lengai is situated within the Gregory Rift Valley (northern Tanzania) and is the only active volcano erupting natrocarbonatite lava. This study investigates the texture and mineralogy of the June 1993 lava at Oldoinyo Lengai, and presents petrographic evidence of liquid immiscibility between silicate, carbonate, chloride, and fluoride melt phases. The 1993 lava is a porphyritic natrocarbonatite consisting of abundant phenocrysts of alkali carbonates, nyerereite and gregoryite, set in a quenched groundmass, composed of sodium carbonate, khanneshite, Na-sylvite and K-halite, and a calcium fluoride phase. Dispersed in the lava are silicate spheroids (< 2 mm) with a cryptocrystalline silicate mineral assemblage wrapped around a core mineral. We have identified several textural features preserved in the silicate spheroids, melt inclusions, and carbonatite groundmass that exhibit evidence of silicate-carbonate, carbonate-carbonate and carbonate-halide immiscibility. Rapid quenching of the lava facilitated the preservation of the end products of these liquid immiscibility processes within the groundmass. Textural evidence (at both macro- and micro-scales) indicates that the silicate, carbonate, chloride and fluoride phases of the lava unmixed at different stages of evolution in the magmatic system.
Abstract: The origin of intraplate carbonatitic to alkaline volcanism in Africa is controversial. A tectonic control, i.e., decompression melting associated with far-field stress, is suggested by correlation with lithospheric sutures, repeated magmatic cycles in the same areas over several million years, synchronicity across the plate, and lack of clear age progression patterns. Conversely, a dominant role for mantle convection is supported by the coincidence of Cenozoic volcanism with regions of lithospheric uplift, positive free-air gravity anomalies, and slow seismic velocities. To improve constraints on the genesis of African volcanism, here we report the first radiometric and isotopic results for the Catanda complex, which hosts the only extrusive carbonatites in Angola. Apatite (U-Th-Sm)/He and phlogopite 40Ar/39Ar ages of Catanda aillikite lavas indicate eruption at ca. 500-800 ka, more than 100 m.y. after emplacement of abundant kimberlites and carbonatites in this region. The lavas share similar high-? (HIMU)-like Sr-Nd-Pb-Hf isotope compositions with other young mantle-derived volcanics from Africa (e.g., Northern Kenya Rift; Cameroon Line). The position of the Catanda complex in the Lucapa corridor, a long-lived extensional structure, suggests a possible tectonic control for the volcanism. The complex is also located on the Bié Dome, a broad region of fast Pleistocene uplift attributed to mantle upwelling. Seismic tomography models indicate convection of deep hot material beneath regions of active volcanism in Africa, including a large area encompassing Angola and northern Namibia. This is strong evidence that intraplate late Cenozoic volcanism, including the Catanda complex, resulted from the interplay between mantle convection and preexisting lithospheric heterogeneities.
Abstract: The abundance and distribution of halogens (F, Cl) are rarely recorded in kimberlites and therefore their petrogenetic significance is poorly constrained. Halogens are usually present in kimberlite rocks in the structure of phlogopite and apatite, but their original concentrations are never fully retained due to the effects of alteration. To provide new constraints on the origin and evolution of halogens in kimberlites and their melts, we present a detailed study of the petrography and geochemistry of the late-Cretaceous Group-I (or archetypal) Roger kimberlite (Ekati cluster, Canada). The studied samples contain abundant anhedral-to-euhedral olivine which is set in a crystalline groundmass of monticellite, phlogopite, apatite, spinel (i.e. magnesian ulvöspinel-magnetite (MUM), Mg-magnetite, pleonaste, Cr-spinel), and perovskite along with abundant secondary alteration phases (i.e. serpentine, garnet (andradite-schlorlomite), amakinite ((Fe2 +, Mg, Mn)(OH)2), calcite). The Roger kimberlite is characterised by the highest recorded F-content (up to 2688 ppm) of the Ekati cluster kimberlites, which is reflected by the preservation of F-rich phases, where bultfonteinite (Ca4(Si2O7)(F, OH)2) and fluorite commonly replace olivine. In order to examine the composition and evolution of the kimberlite melt prior to post-magmatic processes, we studied melt inclusions in olivine, Cr-spinel, monticellite and apatite. Primary multiphase melt inclusions in Cr-spinel, monticellite and apatite and secondary inclusions in olivine are shown to contain a diversity of daughter phases and compositions that are dominated by alkali/alkali-earth (Na, K, Ba, Sr)-enriched Ca-Mg-carbonates ± F, Na-K-chlorides and sulphates, phosphates ± REE, spinel, silicates (e.g. olivine, phlogopite, (clino)humite), and sulphides. Although alkali/alkali-earth- and halogen-bearing phases are abundant in melt inclusions, they are generally absent from the kimberlite groundmass, most likely due to ubiquitous effects of syn- and/or post-magmatic alteration (i.e. serpentinisation). Comparisons between halogens and other trace elements of similar compatibility (i.e. F/Nd and Cl/U) in the Roger kimberlite and their respective estimated primitive mantle abundances show that halogens should be a more significant component in kimberlites than typically measured. We propose that fluorine in the Roger kimberlite was magmatic and was redistributed during hydrothermal alteration by Ca-bearing serpentinising fluids to produce the observed bultfonteinite/fluorite assemblages. Based the compositions and daughter mineral assemblages in primary melt inclusions and reconstructed halogen abundances, we suggest that Cr-spinel, monticellite and apatite crystallised from a variably differentiated Si-P-Cl-F-bearing carbonate melt that was enriched in alkalis/alkali-earths and highly incompatible trace elements.
Abstract: Monticellite is a magmatic and/or deuteric mineral that is often present, but widely varying in concentrations in Group-I (or archetypal) kimberlites. To provide new constraints on the petrogenesis of monticellite and its potential significance to kimberlite melt evolution, we examine the petrography and geochemistry of the minimally altered hypabyssal monticellite-rich Leslie (Canada) and Pipe 1 (Finland) kimberlites. In these kimberlites, monticellite (Mtc) is abundant (25-45 vol%) and can be classified into two distinct morphological types: discrete and intergrown groundmass grains (Mtc-I), and replacement of olivine (Mtc-II). Primary multiphase melt inclusions in monticellite, perovskite and Mg-magnetite contain assemblages dominated by alkali (Na, K, Ba, Sr)-enriched Ca-Mg-carbonates, chlorides, phosphates, spinel, silicates (e.g. olivine, phlogopite) and sulphides. These melt inclusions probably represent snapshots of a variably differentiated kimberlite melt that evolved in-situ towards carbonatitic and silica-poor compositions. Although unconstrained in their concentration, the presence of alkali-carbonates and chlorides in melt inclusions suggests they are a more significant component of the kimberlite melt than commonly recorded by whole-rock analyses. We present petrographic and textural evidence showing that pseudomorphic Mtc-II resulted from an in-situ reaction between olivine and the carbonate component of the kimberlite melt in the decarbonation reactio. This reaction is supported by the preservation of abundant primary inclusions of periclase and to a lesser extent Fe-Mg-oxides in monticellite, perovskite and Mg-magnetite. Based on the preservation of primary periclase inclusions, we infer that periclase also existed in the groundmass, but was subsequently altered to brucite. We suggest that CO2 degassing in the latter stages of kimberlite emplacement into the crust is largely driven by the observed reaction between olivine and the carbonate melt. For this reaction to proceed, CO2 should be removed (i.e. degassed), which will cause further reaction and additional degassing in response to this chemical system change (Le Chatelier's principle). Our study demonstrates that these proposed decarbonation reactions may be a commonly overlooked process in the crystallisation of monticellite and exsolution of CO2, which may in turn contribute to the explosive eruption and brecciation processes that occur during kimberlite magma emplacement and pipe formation.
Earth and Planetary Science Letters, Vol. 401, pp. 132-147.
Africa, South Africa
metasomatism
Abstract: The Karoo igneous rocks (174-185 Ma) of southern Africa represent one of the largest continental flood basalt provinces on Earth. Available evidence indicates that Karoo magmas either originated in the asthenosphere and were extensively modified by interaction with the lithospheric mantle prior to emplacement in the upper crust; or were produced by partial melting of enriched mantle lithosphere. However, no direct evidence of interaction by Karoo melts (or their precursors) with lithospheric mantle rocks has yet been identified in the suites of mantle xenoliths sampled by post-Karoo kimberlites in southern Africa. Here we report U-Pb ages for lindsleyite-mathiasite (LIMA) titanate minerals (crichtonite series) from three metasomatised, phlogopite and clinopyroxene-rich peridotite xenoliths from the ?84 Ma Bultfontein kimberlite (Kimberley, South Africa), located in the southern part of the Karoo magmatic province. The LIMA minerals appear to have formed during metasomatism of the lithospheric mantle by fluids enriched in HFSE (Ti, Zr, Hf, Nb), LILE (K, Ba, Ca, Sr) and LREE. LIMA U-Pb elemental and isotopic compositions were measured in situ by LA-ICP-MS methods, and potential matrix effects were evaluated by solution-mode analysis of mineral separates. LIMA minerals from the three samples yielded apparent U-Pb ages of , and (). A single zircon grain extracted from the ?190 Ma LIMA-bearing sample produced a similar U-Pb age of , within uncertainty of the LIMA ages. These data provide the first robust evidence of fluid enrichment in the lithospheric mantle beneath the Kimberley region at ?180-190 Ma, and suggest causation of mantle metasomatism by Karoo melts or their precursor(s). The results further indicate that U-Pb dating of LIMA minerals provides a new, accurate tool for dating metasomatic events in the lithospheric mantle.
Abstract: Identification of the primary compositions of mantle-derived melts is crucial for understanding mantle compositions and physical conditions of mantle melting. However, these melts rarely reach the Earth's surface unmodified because of contamination, crystal fractionation and degassing, processes that occur almost ubiquitously after melt generation. Here we report snapshots of the melts preserved in sheared peridotite xenoliths from the Udachnaya-East kimberlite pipe, in the central part of the Siberian craton. These xenoliths are among the deepest mantle samples and were delivered by kimberlite magma from 180-230?km depth interval, i.e. from the base of the cratonic lithosphere. The olivine grains of the sheared peridotites contain secondary inclusions of the crystallized melt with bulk molar (Na?+?K)/Ca?~?3.4. Various Na-K-Ca-, Na-Ca-, Na-Mg-, Ca-Mg- and Ca-carbonates, Na-Mg-carbonates with additional anions, alkali sulphates and halides are predominant among the daughter minerals in secondary melt inclusions, whereas silicates, oxides, sulphides and phosphates are subordinate. These inclusions can be considered as Cl-S-bearing alkali-carbonate melts. The presence of aragonite, a high-pressure polymorph of CaCO3, among the daughter minerals suggests a mantle origin for these melt inclusions. The secondary melt inclusions in olivine from the sheared peridotite xenoliths and the melt inclusions in phenocrystic olivines from the host kimberlites demonstrate similarities, in daughter minerals assemblages and trace-element compositions. Moreover, alkali-rich minerals (carbonates, halides, sulphates and sulphides) identified in the studied melt inclusions are also present in the groundmass of the host kimberlites. These data suggests a genetic link between melt enclosed in olivine from the sheared peridotites and melt parental to the Udachnaya-East kimberlites. We suggest that the melt inclusions in olivine from mantle xenoliths may represent near primary, kimberlite melts. These results are new evidence in support of the alkali?carbonate composition of kimberlite melts in their source regions, prior to the kimberlite emplacement into the crust, and are in stark contrast to the generally accepted ultramafic silicate nature of parental kimberlite liquids.
Abstract: The petrologically unique Udachnaya-East kimberlite (Siberia, Russia) is characterised by unserpentinised and H2O-poor volcaniclastic and coherent units that contain fresh olivine, along with abundant alkali-rich carbonates, chlorides, sulphides and sulphates in the groundmass. These mineralogical and geochemical characteristics have led to two divergent models that advocate different origins. It has been suggested that the unserpentinised units from Udachnaya-East are representative of pristine unaltered kimberlite. Conversely, the alkali-chlorine-sulphur enrichment has been attributed to interactions with crustal materials and/or post-emplacement contamination by brines. The mineralogical and geochemical features and the compositions of melt inclusions in unserpentinised and serpentinised Udachnaya-East kimberlite varieties are compared in this study. Both varieties of kimberlite have similar major, compatible and incompatible trace element concentrations and primitive mantle normalised trace element patterns, groundmass textures and silicate, oxide and sulphide mineral compositions. However, these two kimberlite varieties are distinguished by: (i) the presence of unaltered olivine, abundant Na-K-Cl-S-rich minerals (i.e. chlorides, S-bearing alkali-carbonates, sodalite) and the absence of H2O-rich phases (i.e. serpentine, iowaite (Mg4Fe3+(OH)8OCl•3(H2O)) in unserpentinised samples, and (ii) the absence of alkali- and chlorine-enriched phases in the groundmass and characteristic olivine alteration (i.e. replacement by serpentine and/or iowaite) in serpentinised samples. In addition, melt inclusions hosted in olivine, monticellite, spinel and perovskite from unserpentinised and serpentinised kimberlite contain identical daughter phase assemblages that are dominated by alkali-carbonates, chlorides and sulphates/sulphides. This enrichment in alkalis, chlorine and sulphur in melt inclusions demonstrates that these elements were an intrinsic part of the parental magma. The paucity of alkali-carbonates and chlorides in the groundmass of serpentinised Udachnaya-East kimberlite is attributed to their instability and removal during post-emplacement alteration. All evidence previously used in support of crustal and brine contamination of the Udachnaya-East kimberlite is thoroughly evaluated. We demonstrate that ‘contamination models’ are inconsistent with petrographic, geochemical and melt inclusion data. Our combined data suggest that the Udachnaya-East kimberlite crystallised from an essentially H2O-poor, Si-Na-K-Cl-S-bearing carbonate-rich melt.
Abstract: The Benfontein kimberlite is a renowned example of a sill complex and provides an excellent opportunity to examine the emplacement and evolution of intrusive kimberlite magmas. We have undertaken a detailed petrographic and melt inclusion study of the Benfontein Upper, Middle and Lower sills. These sills range in thickness from 0.25 to 5?m. New perovskite and baddeleyite U/Pb dating produced ages of 85.7?±?4.4?Ma and 86.5?±?2.6?Ma, respectively, which are consistent with previous age determinations and indicate emplacement coeval with other kimberlites of the Kimberley cluster. The Benfontein sills are characterised by large variations in texture (e.g., layering) and mineral modal abundance between different sill levels and within individual samples. The Lower Sill is characterised by carbonate-rich diapirs, which intrude into oxide-rich layers from underlying carbonate-rich levels. The general paucity of xenogenic mantle material in the Benfontein sills is attributed to its separation from the host magma during flow differentiation during lateral spreading. The low viscosity is likely responsible for non-explosive emplacement of the Benfontein sills, while the rhythmic layering is attributed to multiple magma injections. The Benfontein sills are marked by the excellent preservation of olivine and groundmass mineralogy, which is composed of monticellite, spinel, perovskite, baddeleyite, ilmenite, apatite, calcite, dolomite along with secondary serpentine and glagolevite [NaMg6[Si3AlO10](OH,O)8•H2O]. This is the first time glagolevite is reported in kimberlites. Groundmass spinel exhibits atoll-textures and is composed of a magnesian ulvöspinel magnetite (MUM) or chromite core, surrounded by occasional pleonaste and a rim of Mg-Al-magnetite. We suggest that pleonaste crystallised as a magmatic phase, but was resorbed back into the residual host melt and/or removed by alteration. Analyses of secondary inclusions in olivine and primary inclusions in monticellite, spinel, perovskite, apatite and interstitial calcite are largely composed of Ca-Mg carbonates and, to a lesser extent, alkali-carbonates and other phases. These inclusions probably represent the entrapment of variably differentiated parental kimberlite melts, which became progressively more enriched in carbonate, alkalis, halogens and sulphur during crystal fractionation. Carbonate-rich diapirs from the Lower Sill contain more exotic phase assemblages (e.g., Ba-Fe titanate, barite, ancylite, pyrochlore), which probably result from the extreme differentiation of residual kimberlite melts followed by physical separation and isolation from the parental carbonate-rich magma. It is likely that any alkali or halogen rich minerals crystallising in the groundmass were removed from the groundmass during syn?/post-magmatic alteration, or in the case of Na, remobilised to form secondary glagolevite. The Benfontein sill complex therefore provides a unique example of how the composition of kimberlites may be modified after magma emplacement in the upper crust.
Contributions to Mineralogy and Petrology, Vol. 173, 12, pp. 106-
Russia, Kola Peninsula
deposit - Afrikanda
Abstract: Perovskite is a common accessory mineral in a variety of mafic and ultramafic rocks, but perovskite deposits are rare and studies of perovskite ore deposits are correspondingly scarce. Perovskite is a key rock-forming mineral and reaches exceptionally high concentrations in olivinites, diverse clinopyroxenites and silicocarbonatites in the Afrikanda alkaline-ultramafic complex (Kola Peninsula, NW Russia). Across these lithologies, we classify perovskite into three types (T1-T3) based on crystal morphology, inclusion abundance, composition, and zonation. Perovskite in olivinites and some clinopyroxenites is represented by fine-grained, equigranular, monomineralic clusters and networks (T1). In contrast, perovskite in other clinopyroxenites and some silicocarbonatites has fine- to coarse-grained interlocked (T2) and massive (T3) textures. Electron backscatter diffraction reveals that some T1 and T2 perovskite grains in the olivinites and clinopyroxenites are composed of multiple subgrains and may represent stages of crystal rotation, coalescence and amalgamation. We propose that in the olivinites and clinopyroxenites, these processes result in the transformation of clusters and networks of fine-grained perovskite crystals (T1) to mosaics of more coarse-grained (T2) and massive perovskite (T3). This interpretation suggests that sub-solidus processes can lead to the development of coarse-grained and massive perovskite. A combination of characteristic features identified in the Afrikanda perovskite (equigranular crystal mosaics, interlocked irregular-shaped grains, and massive zones) is observed in other oxide ore deposits, particularly in layered intrusions of chromitites and intrusion-hosted magnetite deposits and suggests that the same amalgamation processes may be responsible for some of the coarse-grained and massive textures observed in oxide deposits worldwide.
Abstract: The Benfontein kimberlite is a renowned example of a sill complex and provides an excellent opportunity to examine the emplacement and evolution of intrusive kimberlite magmas. We have undertaken a detailed petrographic and melt inclusion study of the Benfontein Upper, Middle and Lower sills. These sills range in thickness from 0.25 to 5?m. New perovskite and baddeleyite U/Pb dating produced ages of 85.7?±?4.4?Ma and 86.5?±?2.6?Ma, respectively, which are consistent with previous age determinations and indicate emplacement coeval with other kimberlites of the Kimberley cluster. The Benfontein sills are characterised by large variations in texture (e.g., layering) and mineral modal abundance between different sill levels and within individual samples. The Lower Sill is characterised by carbonate-rich diapirs, which intrude into oxide-rich layers from underlying carbonate-rich levels. The general paucity of xenogenic mantle material in the Benfontein sills is attributed to its separation from the host magma during flow differentiation during lateral spreading. The low viscosity is likely responsible for non-explosive emplacement of the Benfontein sills, while the rhythmic layering is attributed to multiple magma injections. The Benfontein sills are marked by the excellent preservation of olivine and groundmass mineralogy, which is composed of monticellite, spinel, perovskite, baddeleyite, ilmenite, apatite, calcite, dolomite along with secondary serpentine and glagolevite [NaMg6[Si3AlO10](OH,O)8•H2O]. This is the first time glagolevite is reported in kimberlites. Groundmass spinel exhibits atoll-textures and is composed of a magnesian ulvöspinel - magnetite (MUM) or chromite core, surrounded by occasional pleonaste and a rim of Mg-Al-magnetite. We suggest that pleonaste crystallised as a magmatic phase, but was resorbed back into the residual host melt and/or removed by alteration. Analyses of secondary inclusions in olivine and primary inclusions in monticellite, spinel, perovskite, apatite and interstitial calcite are largely composed of Ca-Mg carbonates and, to a lesser extent, alkali-carbonates and other phases. These inclusions probably represent the entrapment of variably differentiated parental kimberlite melts, which became progressively more enriched in carbonate, alkalis, halogens and sulphur during crystal fractionation. Carbonate-rich diapirs from the Lower Sill contain more exotic phase assemblages (e.g., Ba-Fe titanate, barite, ancylite, pyrochlore), which probably result from the extreme differentiation of residual kimberlite melts followed by physical separation and isolation from the parental carbonate-rich magma. It is likely that any alkali or halogen rich minerals crystallising in the groundmass were removed from the groundmass during syn?/post-magmatic alteration, or in the case of Na, remobilised to form secondary glagolevite. The Benfontein sill complex therefore provides a unique example of how the composition of kimberlites may be modified after magma emplacement in the upper crust.
Contributions to Mineralogy and Petrology, Vol. 174, 8 22p.
Africa, South Africa, Russia, Canada, Northwest Territories
deposit - Bultfontein, Roberts Victor, Udachnaya-East, Obnazhennaya, Vtorogodnitsa, Koala, Leslie
Abstract: Djerfisherite (K6(Fe,Ni,Cu)25S26Cl) occurs as an accessory phase in the groundmass of many kimberlites, kimberlite-hosted mantle xenoliths, and as a daughter inclusion phase in diamonds and kimberlitic minerals. Djerfisherite typically occurs as replacement of pre-existing Fe-Ni-Cu sulphides (i.e. pyrrhotite, pentlandite and chalcopyrite), but can also occur as individual grains, or as poikilitic phase in the groundmass of kimberlites. In this study, we present new constraints on the origin and genesis of djerfisherite in kimberlites and their entrained xenoliths. Djerfisherite has extremely heterogeneous compositions in terms of Fe, Ni and Cu ratios. However, there appears to be no distinct compositional range of djerfisherite indicative of a particular setting (i.e. kimberlites, xenoliths or diamonds), rather this compositional diversity reflects the composition of the host kimberlite melt and/or interacting metasomatic medium. In addition, djerfisherite may contain K and Cl contents less than the ideal formula unit. Raman spectroscopy and electron backscatter diffraction (EBSD) revealed that these K-Cl poor sulphides still maintain the same djerfisherite crystal structure. Two potential mechanisms for djerfisherite formation are considered: (1) replacement of pre-existing Fe-Ni-Cu sulphides by djerfisherite, which is attributed to precursor sulphides reacting with metasomatic K-Cl bearing melts/fluids in the mantle or the transporting kimberlite melt; (2) direct crystallisation of djerfisherite from the kimberlite melt in groundmass or due to kimberlite melt infiltration into xenoliths. The occurrence of djerfisherite in kimberlites and its mantle cargo from localities worldwide provides strong evidence that the metasomatising/infiltrating kimberlite melt/fluid was enriched in K and Cl. We suggest that kimberlites originated from melts that were more enriched in alkalis and halogens relative to their whole-rock compositions.
Abstract: The emplacement age of the Great Udzha Dyke (northern Siberian Craton) was determined by the U-Pb dating of apatite using laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). This produced an age of 1386 ± 30 Ma. This dyke along with two other adjacent intrusions, which cross-cut the sedimentary units of the Udzha paleo-rift, were subjected to paleomagnetic investigation. The paleomagnetic poles for the Udzha paleo-rift intrusions are consistent with previous results published for the Chieress dyke in the Anabar shield of the Siberian Craton (1384 ± 2 Ma). Our results suggest that there was a period of intense volcanism in the northern Siberian Craton, as well as allow us to reconstruct the apparent migration of the Siberian Craton during the Mesoproterozoic.
Abstract: The Siberian Craton was assembled in a Paleoproterozoic episode at about 1.88?Ga by the collision of older blocks, followed at about 1.86?Ga by post-collisional felsic magmatism. We have found a set of extremely fresh mica-bearing lamprophyre-looking rocks within the Sharyzhalgay metamorphic complex of the south-western Siberian Craton. Zircon from these rocks yields a UPb TIMS age of 1864.7?±?1.8?Ma, which coincides perfectly with the peak of the post-collisional granite ages and postdates by ~15?Ma the peak of ages obtained for metamorphism. The same ages were reported earlier for a mafic dyke with ocean island basalt (OIB) geochemical signatures and a Pt-bearing mafic-ultramafic intrusion found in the same region. Mineralogy, major and trace element geochemistry and Sr-Nd-Pb isotopes show that the studied rocks (1) have shoshonitic affinity, (2) are hybrid rocks with mineral assemblages which could not be in equilibrium, (3) where derived by recycling of an Archean crustal source and (4) resemble post-collision Tibetan shoshonitic series. The genesis of these rocks is considered to be due to melting of crustal lithologies and metasomatized lithospheric mantle within a subducted slab. Some of the resulting melts ascended through the lithospheric column and fractionated to low-Mg absarokites, whereas other melts were contaminated by orthopyroxenitic mantle material and attained unusual high-Mg mafic compositions. According to our model, the post-collisional magmatism (shoshonite- and OIB-type) occurred due to upwelling of hot asthenosphere through a slab window, when the active collision ceased as a result of the slab break off and loss of the slab pull force. Overall, our study shows that in the Paleoproterozoic shoshonitic melts were emplaced within a similar tectonic setting as seen today in modern orogenic systems.
Abstract: Megacrysts are large (cm to >20?cm in size) mantle-derived crystals, which are commonly entrained by kimberlite magmas, comprising of olivine, orthopyroxene, clinopyroxene, phlogopite, garnet, ilmenite and zircon as common phases. Numerous studies have shown megacrysts to contain polymineralic inclusions, which have been interpreted to represent entrapped kimberlite melt. To constrain the origin of these inclusions in megacrysts and their relationship to kimberlite magmatism, we present a detailed petrographic and geochemical study of clinopyroxene and olivine megacrysts and their hosted inclusions from the Diavik, Jericho, Leslie (Slave Craton, Canada) and Udachnaya-East (Siberian Craton, Russia) kimberlites. The studied megacrysts are between 1 and 3?cm in size and representative of both the Cr-rich and Cr-poor suites. Megacrysts contain two types of inclusions: i. Large (<0.5-5?mm in size) round-to-irregular shaped polymineralic inclusions, which are composed of minerals similar to the host kimberlite groundmass, and consist of olivine, calcite, spinel, perovskite, phlogopite and apatite (± serpentine, alkali-carbonates, alkali-chlorides, barite). ii. Swarms/trails of ‘micro melt inclusions’ (MMI; <1-5??m in size), which surround polymineralic inclusions, veins and fractures, thereby forming a ‘spongy’ texture. MMIs generally contain multiphase assemblages similar to polymineralic inclusions as well as various additional phases, such as alkali-carbonates or alkali-chlorides, which are typically absent in polymineralic inclusions and the surrounding kimberlite groundmass. Textural and geochemical evidence suggests that polymineralic inclusions in megacrysts crystallised from kimberlite melt, which infiltrated along fracture/vein networks. The polymineralic inclusion assemblages resulted from disequilibria reactions between the host megacryst and infiltrating kimberlite melt, which was likely enhanced by rapidly changing conditions during magmatic ascent. The connectivity of polymineralic inclusions to the kimberlite groundmass via network veins/fractures suggests that they are susceptible to infiltrating post-emplacement fluids. Therefore, the vast majority of polymineralic inclusions are unlikely to represent ‘pristine’ entrapped kimberlite melt. In contrast, MMIs are isolated within megacrysts (i.e. not connected to fractures/veins and therefore shielded from post-magmatic fluids) and probably represent entrapped remnants of the variably differentiated kimberlite melt, which was more enriched in alkalis-Cl-S-CO2 than serpentinised polymineralic inclusions and the host rocks exposed at Earth's surface as kimberlites.
Abstract: Identification of the primary compositions of mantle-derived melts is crucial for understanding mantle compositions and physical conditions of mantle melting. However, these melts rarely reach the Earth's surface unmodified because of contamination, crystal fractionation and degassing, processes that occur almost ubiquitously after melt generation. Here we report snapshots of the melts preserved in sheared peridotite xenoliths from the Udachnaya-East kimberlite pipe, in the central part of the Siberian craton. These xenoliths are among the deepest mantle samples and were delivered by kimberlite magma from 180-230?km depth interval, i.e. from the base of the cratonic lithosphere. The olivine grains of the sheared peridotites contain secondary inclusions of the crystallized melt with bulk molar (Na?+?K)/Ca?~?3.4. Various Na-K-Ca-, Na-Ca-, Na-Mg-, Ca-Mg- and Ca-carbonates, Na-Mg-carbonates with additional anions, alkali sulphates and halides are predominant among the daughter minerals in secondary melt inclusions, whereas silicates, oxides, sulphides and phosphates are subordinate. These inclusions can be considered as Cl-S-bearing alkali-carbonate melts. The presence of aragonite, a high-pressure polymorph of CaCO3, among the daughter minerals suggests a mantle origin for these melt inclusions. The secondary melt inclusions in olivine from the sheared peridotite xenoliths and the melt inclusions in phenocrystic olivines from the host kimberlites demonstrate similarities, in daughter minerals assemblages and trace-element compositions. Moreover, alkali-rich minerals (carbonates, halides, sulphates and sulphides) identified in the studied melt inclusions are also present in the groundmass of the host kimberlites. These data suggests a genetic link between melt enclosed in olivine from the sheared peridotites and melt parental to the Udachnaya-East kimberlites. We suggest that the melt inclusions in olivine from mantle xenoliths may represent near primary, kimberlite melts. These results are new evidence in support of the alkali?carbonate composition of kimberlite melts in their source regions, prior to the kimberlite emplacement into the crust, and are in stark contrast to the generally accepted ultramafic silicate nature of parental kimberlite liquids.
Ivanov, A.V., Mukasa, S.B., Kamenetsky, V.S., Ackerson, M., Zedgenizov, D.A.
Volatile concentrations in olivine hosted melt inclusions from meimechite and melanephenelinite lavas of the Siberian Trap Large Igneous Province: evidence for flux related high Ti, high Mg magmatism.
Journal of Raman Spectroscopy, in press available, 19p. Pdf
Russia
deposit - Udachnaya
Abstract: The study of kimberlite rocks is important as they provide critical information regarding the composition and dynamics of the continental mantle and are the principal source of diamonds. Despite many decades of research, the original compositions of kimberlite melts, which are thought to be derived from depths > 150 km, remain highly debatable due to processes that can significantly modify their composition during ascent and emplacement. Snapshots of the kimberlite?related melts were entrapped as secondary melt inclusions hosted in olivine from sheared peridotite xenoliths from the Udachnaya?East pipe (Siberian craton). These xenoliths originated from 180? to 220?km depth and are among the deepest derived samples of mantle rocks exposed at the surface. The crystallised melt inclusions contain diverse daughter mineral assemblages (>30 mineral species), which are dominated by alkali?rich carbonates, sulfates, and chlorides. The presence of aragonite as a daughter mineral suggests a high?pressure origin for these inclusions. Raman?mapping studies of unexposed inclusions show that they are dominated by carbonates (>65 vol.%), whereas silicates are subordinate (<13 vol.%). This indicates that the parental melt for the inclusions was carbonatitic. The key chemical features of this melt are very high contents of alkalis, carbon dioxide, chlorine, and sulfur and extremely low silica and water. Alkali?carbonate melts entrapped in xenolith minerals likely represent snapshots of the primitive kimberlite melt. This composition is in contrast with the generally accepted notion that kimberlites originated as ultramafic silicate water?rich melts. Experimental studies revealed that alkali?carbonate melts are a very suitable diamond?forming media. Therefore, our findings support the idea that some diamonds and kimberlite magmatism may be genetically related.
Abstract: Elucidating the composition of primary kimberlite melts is essential to understanding the nature of their source, petrogenesis, rheology, transport and ultimately the origin of diamonds. Kimberlite rocks are typically comprised of abundant olivine (~2560 vol%), which occurs as individual grains of variable size and morphology, and includes xenocrysts and zoned phenocrysts. Zoning patterns and inclusions in olivine can be used to decipher the petrogenetic history of kimberlites, starting from their generation in the mantle through to emplacement in the crust. This study examines well-preserved, euhedral, zoned olivine crystals from the Mark kimberlite (Lac de Gras, Canada). Olivine typically consists of xenocrystic cores, which are homogeneous in composition but vary widely between grains (Fo88.193.6). These cores are in turn surrounded by (in order of crystallisation) magmatic rims and Mg-rich rinds (Fo95.398.1). In addition, we document a new type of olivine zone (‘outmost rind’) that overgrows Mg-rich rinds. Crystal and melt/fluid inclusions are abundant in olivine and preserve a record of kimberlite melt evolution. For the first time in the studies of kimberlite olivine, we report primary melt inclusions hosted in Mg-rich olivine rinds. In addition, we observe that pseudosecondary melt/fluid inclusions are restricted to interior olivine zones (cores, rims) and are considered to have formed prior to rind formation. Pseudosecondary melt/fluid inclusions are inferred to have been entrapped at depth, as evidenced by measured densities in thermometric experiments of CO2 and decrepitation haloes, indicating a minimum entrapment pressure of ~200450 MPa (or ~615 km). Both primary and pseudosecondary melt inclusions in olivine have daughter minerals dominated by CaMg and K-Na-Ba-Sr-bearing carbonates, K-Na-chlorides along with subordinate silicates (e.g., phlogopite, monticellite), Fe-Mg-Al-Ti-spinel, perovskite, phosphates and sulphates/sulphides and periclase. In addition to phases reported in primary melt inclusions, pseudosecondary melt inclusions contain more diverse and exotic daughter mineral assemblages, where they contain phases such as tetraferriphlogopite Ba- or K-sulphates, kalsilite and Na-phosphates. The daughter mineral assemblages are consistent with a silica-poor, alkali dolomitic carbonatite melt. We demonstrate that the different types of inclusions in olivine can assist in constraining the timing of multi-stage olivine growth and the composition of the crystallising melt. The large variance in olivine zoning patterns, morphologies and Ni distribution (i.e. both coupling with and decoupling from Fo) indicates that olivine in the studied Mark kimberlite samples represent an accumulation of olivine, where olivine was derived from successive stages of the ascending magma and/or from multiple, but related pulses of magma. Primary and pseudosecondary melt/fluid inclusions in olivine indicate that a variably differentiated silica-poor, halogen-bearing, alkali-dolomitic melt crystallised and transported olivine in the Mark kimberlite.
Contributions to Mineralogy and Petrology, Vol. 175, 13p. Pdf
Russia
perovskite
Abstract: The exceptional accumulation of perovskite in the alkaline-ultramafic Afrikanda complex (Kola Peninsula, Russia) led to the study of polymineralic inclusions hosted in perovskite and magnetite to understand the development of the perovskite-rich zones in the olivinites, clinopyroxenites and silicocarbonatites. The abundance of inclusions varies across the three perovskite textures, with numerous inclusions hosted in the fine-grained equigranular perovskite, fewer inclusions in the coarse-grained interlocked perovskite and rare inclusions in the massive perovskite. A variety of silicate, carbonate, sulphide, phosphate and oxide phases are assembled randomly and in variable proportions in the inclusions. Our observations reveal that the inclusions are not bona fide melt inclusions. We propose that the inclusions represent material trapped during subsolidus sintering of magmatic perovskite. The continuation of the sintering process resulted in the coarsening of inclusion-rich subhedral perovskite into inclusion-poor anhedral and massive perovskite. These findings advocate the importance of inclusion studies for interpreting the origin of oxide minerals and their associated economic deposits and suggest that the formation of large scale accumulations of minerals in other oxide deposits may be a result of annealing of individual disseminated grains.
Journal of Petrology, 10.1093/petrology /egaa062/5857610 90p. Pdf
Africa, South Africa
deposit - Kimberley
Abstract: Olivine is the most abundant phase in kimberlites and is stable throughout most of the crystallisation sequence, thus providing an extensive record of kimberlite petrogenesis. To better constrain the composition, evolution, and source of kimberlites we present a detailed petrographic and geochemical study of olivine from multiple dyke, sill, and root zone kimberlites in the Kimberley cluster (South Africa). Olivine grains in these kimberlites are zoned, with a central core, a rim overgrowth, and occasionally an external rind. Additional ‘internal’ and ‘transitional’ zones may occur between the core and rim, and some samples of root zone kimberlites contain a late generation of high-Mg olivine in cross-cutting veins. Olivine records widespread pre-ascent (proto-)kimberlite metasomatism in the mantle including: (a) Relatively Fe-rich (Mg# <89) olivine cores interpreted to derive from the disaggregation of kimberlite-related megacrysts (20% of cores); (b) Mg-Ca-rich olivine cores (Mg# >89; >0.05?wt.% CaO) suggested to be sourced from neoblasts in sheared peridotites (25% of cores); (c) transitional zones between cores and rims probably formed by partial re-equilibration of xenocrysts (now cores) with a previous pulse of kimberlite melt (i.e., compositionally heterogeneous xenocrysts); and (d) olivine from the Wesselton water tunnel sills, internal zones (I), and low-Mg# rims, that crystallised from a kimberlite melt that underwent olivine fractionation within the shallow lithospheric mantle. Magmatic crystallisation begins with internal olivine zones (II), which are common but not ubiquitous in the Kimberley olivine. These zones are euhedral, contain rare inclusions of chromite, and have a higher Mg# (90.0 ± 0.5), NiO, and Cr2O3 contents, but are depleted in CaO compared to the rims. Internal olivine zones (II) are interpreted to crystallise from a primitive kimberlite melt during its ascent and transport of olivine toward the surface. Their compositions suggest assimilation of peridotitic material (particularly orthopyroxene) and potentially sulfides prior to or during crystallisation. Comparison of internal zones (II) with liquidus olivine from other mantle-derived carbonate-bearing magmas (i.e., orangeites, ultramafic lamprophyres, melilitites) show that low (100×) Mn/Fe (?1.2), very low Ca/Fe (?0.6), and moderate Ni/Mg ratios (?1.1) appear to be the hallmarks of olivine in melts derived from carbonate-bearing garnet-peridotite sources. Olivine rims display features indicative of magmatic crystallisation, which are typical of olivine rims in kimberlites worldwide - i.e. primary inclusions of chromite, Mg-ilmenite and rutile, homogeneous Mg# (88.8 ± 0.3), decreasing Ni and Cr, increasing Ca and Mn. Rinds and high-Mg olivine are characterised by extreme Mg-Ca-Mn enrichment and Ni depletion, and textural relationships indicate these zones represent replacement of pre-existing olivine, with some new crystallisation of rinds. These zones likely precipitated from evolved, oxidised, and relatively low-temperature kimberlite fluids after crustal emplacement. In summary, this study demonstrates the utility of combined petrography and olivine geochemistry to trace the evolution of kimberlite magmatic systems from early metasomatism of the lithospheric mantle by (proto-)kimberlite melts, to crystallisation at different depths en route to surface, and finally late-stage deuteric/hydrothermal fluid alteration processes after crustal emplacement.
Abstract: Kimberlites are the surface manifestation of deeply-derived (>150 km) and rapidly ascended magmas. Fresh kimberlite rocks are exceptionally rare, as most of them are invariably modified by pervasive deuteric and/or post-magmatic fluids that overprint the original mineralogy. In this study, we examined fresh archetypal kimberlite from the Mark pipe (Lac de Gras, Canada), which is characterised by well-preserved olivine and groundmass minerals. The sequence of crystallisation of the parental melt and its major compositional features, including oxygen fugacity, were reconstructed using textural relationships between magmatic minerals, their zoning patterns and crystal/melt/fluid inclusions. Crystal and multiphase primary, pseudosecondary and secondary melt/fluid inclusions in olivine, Cr-diopside, spinel, perovskite, phlogopite/kinoshitalite, apatite and calcite preserve a record of different stages of kimberlite melt evolution. Melt/fluid inclusions are generally more depleted in silica and more enriched in alkalis (K, Na), alkali-earth (Ba, Sr) and halogens (Cl, F) relative to the whole-rock composition of the Mark kimberlite. These melt/fluid inclusion compositions, in combination with presence of elevated CaO (up to 1.73 wt%), in Mg-rich olivine rinds, crystallisation of groundmass kinoshitalite, carbonates (calcite, Sr-Ba-bearing) and alkali-enriched rims around apatite suggest that there was progressive enrichment in CO2, alkalis and halogens in the evolving parental melt. The Mark kimberlite groundmass is characterised by the following stages of in-situ crystallisation: (1) olivine rims around xenocrystic cores + Cr-spinel/TIMAC. (2) Mg-rich olivine rinds around olivine rims/cores + MUM-spinel (followed by pleonaste and Mg-magnetite) + monticellite (+ partial resorption of olivine, along with the formation of ferropericlase and CO2 as a result of decarbonation reactions) + perovskite + apatite. (3) Olivine outmost rinds, which are coeval with phlogopite/kinoshitalite + apatite + sulphides + carbonate (calcite, Ba-Sr-Na-bearing varieties). In addition, oxygen fugacity of the Mark kimberlite was constrained by olivine-chromite, perovskite and monticellite oxygen barometry and showed that the parental melt became progressively more oxidised in response to fractional crystallisation. (4) Deuteric (i.e. late-stage magmatic) and/or post-magmatic (i.e. external fluids) alteration of magmatic minerals (e.g., olivine, monticellite, ferropericlase) and crystallisation of mesostasis serpentine, K-bearing chlorite and brucite (i.e. replacement of ferropericlase). The absence of any alkali (Na, K) and halogen (F, Cl) rich groundmass minerals in the Mark kimberlite may be attributed to these elements becoming concentrated in the late-stage melt where they potentially formed unstable, water-soluble carbonates (such as those observed in melt inclusions). Consequently, these minerals were most likely removed from the groundmass by deuteric and/or post-magmatic alteration.
Abstract: To provide new constraints on the evolution of ultramafic lamprophyre melts and relation to kimberlites, we examined monomineralic and primary multiphase melt inclusions in rock-forming minerals within damtjernite from Viktoria pipe, Anabar region, Siberia craton, Russia. The studied samples are relatively unaltered nepheline-bearing, carbonate-poor damtjernite with a significant amount of monticellite in the groundmass and as a replacement of olivine. Studied inclusions hosted by groundmass monticellite, magnesian ulvöspinel-magnetite and perovskite. Monomineralic inclusions sized up to 10 ?m are round-toeuhedral in shape and are comprised of monticellite, spinel, perovskite and nepheline. Multiphase melt inclusions sized up to 10-15 ?m have rounded to elongate and amoeboid shapes. These inclusions are heterogeneous in composition and consist of perovskite, spinel group minerals, apatite (including F- and Sr-apatite), feldspathoids, multiphase alkali (Na, K) carbonate and chloride (sylvite/halite), rare K-Naand Ba-sulfates, phlogopite and baddeleyite. Despite the lack of carbonate phases in studied rocks, the composition of multiphase inclusions indicates that lamprophyre melts contained carbonate or carbonate/chlorite components. The CO2 degassing is consistent with the reaction between olivine and carbonate-bearing melt led to decarbonation reaction and generation of montichellite, as described in [1]. The composition of multiphase inclusions within minerals from lamprophyres is close to the composition of multiphase inclusions within olivine, spinel, monticellite, perovskite from kimberlites, thus indicating possible genetic links between parental melts of ultramafic lamprophyre and kimberlite.
Abstract: Sulfide liquids that immiscibly separate from silicate melts in different magmatic processes accumulate chalcophile metals and may represent important sources of the metals in Earth's crust for the formation of ore deposits. Sulfide phases commonly found in some primitive mid-ocean ridge basalts (MORB) may support the occurrence of sulfide immiscibility in the crust without requiring magma contamination and/or extensive fractionation. However, the records of incipient sulfide melts in equilibrium with primitive high-Mg olivine and Cr-spinel are scarce. Sulfide globules in olivine phenocrysts in picritic rocks of MORB-affinity at Kamchatsky Mys (Eastern Kamchatka, Russia) represent a well-documented example of natural immiscibility in primitive oceanic magmas. Our study examines the conditions of silicate-sulfide immiscibility in these magmas by reporting high precision data on the compositions of Cr-spinel and silicate melt inclusions, hosted in Mg-rich olivine (86.9-90 mol% Fo), which also contain globules of magmatic sulfide melt. Major and trace element contents of reconstructed parental silicate melts, redox conditions (?QFM = +0.1 ± 0.16 (1?) log. units) and crystallization temperature (1200-1285 °C), as well as mantle potential temperatures (~1350 °C), correspond to typical MORB values. We show that nearly 50% of sulfur could be captured in daughter sulfide globules even in reheated melt inclusions, which could lead to a significant underestimation of sulfur content in reconstructed silicate melts. The saturation of these melts in sulfur appears to be unrelated to the effects of melt crystallization and crustal assimilation, so we discuss the reasons for the S variations in reconstructed melts and the influence of pressure and other parameters on the SCSS (Sulfur Content at Sulfide Saturation).
Journal of Petrology, in press available, 90p. Pdf
Africa, South Africa
deposit - Kimberley
Abstract: Olivine is the most abundant phase in kimberlites and is stable throughout most of the crystallization sequence, thus providing an extensive record of kimberlite petrogenesis. To better constrain the composition, evolution, and source of kimberlites we present a detailed petrographic and geochemical study of olivine from multiple dyke, sill, and root zone kimberlites in the Kimberley cluster (South Africa). Olivine grains in these kimberlites are zoned, with a central core, a rim overgrowth, and occasionally an external rind. Additional ‘internal’ and ‘transitional’ zones may occur between the core and rim, and some samples of root zone kimberlites contain a late generation of high-Mg olivine in cross-cutting veins. Olivine records widespread pre-ascent (proto-)kimberlite metasomatism in the mantle including the following features: (1) relatively Fe-rich (Mg# <89) olivine cores interpreted to derive from the disaggregation of kimberlite-related megacrysts (20?% of cores); (2) Mg-Ca-rich olivine cores (Mg# >89; >0•05?wt% CaO) suggested to be sourced from neoblasts in sheared peridotites (25?% of cores); (3) transitional zones between cores and rims probably formed by partial re-equilibration of xenocrysts (now cores) with a previous pulse of kimberlite melt (i.e. compositionally heterogeneous xenocrysts); (4) olivine from the Wesselton water tunnel sills, internal zones (I), and low-Mg# rims, which crystallized from a kimberlite melt that underwent olivine fractionation and stalled within the shallow lithospheric mantle. Magmatic crystallization begins with internal olivine zones (II), which are common but not ubiquitous in the Kimberley olivine. These zones are euhedral, contain rare inclusions of chromite, and have a higher Mg# (90•0 ± 0•5), NiO, and Cr2O3 contents, but are depleted in CaO compared with the rims. Internal olivine zones (II) are interpreted to crystallize from a primitive kimberlite melt during its ascent and transport of olivine toward the surface. Their compositions suggest assimilation of peridotitic material (particularly orthopyroxene) and potentially sulfides prior to or during crystallization. Comparison of internal zones (II) with liquidus olivine from other mantle-derived carbonate-bearing magmas (i.e. orangeites, ultramafic lamprophyres, melilitites) shows that low (100×) Mn/Fe (?1•2), very low Ca/Fe (?0•6), and moderate Ni/Mg ratios (?1•1) appear to be the hallmarks of olivine in melts derived from carbonate-bearing garnet-peridotite sources. Olivine rims display features indicative of magmatic crystallization, which are typical of olivine rims in kimberlites worldwide; that is, primary inclusions of chromite, Mg-ilmenite and rutile, homogeneous Mg# (88•8 ± 0•3), decreasing Ni and Cr, and increasing Ca and Mn. Rinds and high-Mg olivine are characterized by extreme Mg-Ca-Mn enrichment and Ni depletion, and textural relationships indicate that these zones represent replacement of pre-existing olivine, with some new crystallization of rinds. These zones probably precipitated from evolved, oxidized, and relatively low-temperature kimberlite fluids after crustal emplacement. In summary, this study demonstrates the utility of combined petrography and olivine geochemistry to trace the evolution of kimberlite magmatic systems from early metasomatism of the lithospheric mantle by (proto-)kimberlite melts, to crystallization at different depths en route to surface, and finally late-stage deuteric or hydrothermal fluid alteration after crustal emplacement.
Lithos, doi.org/10.1016/ j.lithos.2020.105918 67p. Pdf
Africa, South Africa
deposit - Roberts Victor
Abstract: Platinum-group elements (PGE) display a chalcophile behaviour and are largely hosted by base metal sulphide (BMS) minerals in the mantle. During partial melting of the mantle, BMS release their metal budget into the magma generated. The fertility of magma sources is a key component of the mineralisation potential of large igneous provinces (LIP) and the origin of orthomagmatic sulphide deposits hosted in cratonic mafic magmatic systems. Fertility of mantle-derived magma is therefore predicated on our understanding of the abundance of metals, such as the PGE, in the asthenospheric and lithospheric mantle. Estimations of the abundance of chalcophile elements in the upper mantle are based on observations from mantle xenoliths and BMS inclusions in diamonds. Whilst previous assessments exist for the BMS composition and chalcophile element budget of peridotitic mantle, relatively few analyses have been published for eclogitic mantle. Here, we present sulphide petrography and an extensive in situ dataset of BMS trace element compositions from Roberts Victor eclogite xenoliths (Kaapvaal Craton, South Africa). The BMS are dominated by pyrite-chalcopyrite-pentlandite (± pyrrhotite) assemblages with S/Se ratios ranging 1200 to 36,840 (with 87% of analyses having S/Se this editing is incorrect. This should read "(with 87% of analyses having S/Se < 10,000)" Please note the 100 ppm) and are characteristically enriched in Os, Ir, Ru and Rh. Nano- and micron-scale Pd-Pt antimonide, telluride and arsenide platinum-group minerals (PGM) are observed spatially associated with BMS. We suggest that the predominance of pyrite in the xenoliths reflects the process of eclogitisation and that the trace element composition of the eclogite BMS was inherited from oceanic crustal protoliths of the eclogites, introduced into the SCLM via ancient subduction during formation of the Colesberg Magnetic Lineament c. 2.9 Ga and the cratonisation of the Kaapvaal Craton. Crucially, we demonstrate that the PGE budget of eclogitic SCLM may be substantially higher than previously reported, akin to peridotitic compositions, with significant implications for the PGE fertility of cratonic mafic magmatism and metallogenesis. We quantitatively assess these implications by modelling the chalcophile geochemistry of an eclogitic melt component in parental magmas of the mafic Rustenburg Layered Suite of the Bushveld Complex.
Lithos, doi.org/10.1016/ jlithos.2020.105880, 26p. Pdf
Africa, South Africa
deposit - Bultfontein
Abstract: The metasomatised continental mantle may play a key role in the generation of some ore deposits, in particular mineral systems enriched in platinum-group elements (PGE) and Au. The cratonic lithosphere is the longest-lived potential source for these elements, but the processes that facilitate their pre-concentration in the mantle and their later remobilisation to the crust are not yet well-established. Here, we report new results on the petrography, major-element, and siderophile- and chalcophile-element composition of native Ni, base metal sulphides (BMS), and spinels in a suite of well-characterised, highly metasomatised and weakly serpentinised peridotite xenoliths from the Bultfontein kimberlite in the Kaapvaal Craton, and integrate these data with published analyses. Pentlandite in polymict breccias (failed kimberlite intrusions at mantle depth) has lower trace-element contents (e.g., median total PGE 0.72 ppm) than pentlandite in phlogopite peridotites and Mica-Amphibole-Rutile-Ilmenite-Diopside (MARID) rocks (median 1.6 ppm). Spinel is an insignificant host for all elements except Zn, and BMS and native Ni account for typically <25% of the bulk-rock PGE and Au. High bulk-rock Te/S suggest a role for PGE-bearing tellurides, which, along with other compounds of metasomatic origin, may host the missing As, Ag, Cd, Sb, Te and, in part, Bi that are unaccounted for by the main assemblage. The close spatial relationship between BMS and metasomatic minerals (e.g., phlogopite, ilmenite) indicates that the lithospheric mantle beneath Bultfontein was resulphidised by metasomatism after initial melt depletion during stabilisation of the cratonic lithosphere. Newly-formed BMS are markedly PGE-poor, as total PGE contents are <4.2 ppm in pentlandite from seven samples, compared to >26 ppm in BMS in other peridotite xenoliths from the Kaapvaal craton. This represents a strong dilution of the original PGE abundances at the mineral scale, perhaps starting from precursor PGE alloy and small volumes of residual BMS. The latter may have been the precursor to native Ni, which occurs in an unusual Ni-enriched zone in a harzburgite and displays strongly variable, but overall high PGE abundances (up to 81 ppm). In strongly metasomatised peridotites, Au is enriched relative to Pd, and was probably added along with S. A combination of net introduction of S, Au +/? PGE from the asthenosphere and intra-lithospheric redistribution, in part sourced from subducted materials, during metasomatic events may have led to sulphide precipitation at ~80-120 km beneath Bultfontein. This process locally enhanced the metallogenic fertility of this lithospheric reservoir. Further mobilisation of the metal budget stored in these S-rich domains and upwards transport into the crust may require interaction with sulphide-undersaturated melts that can dissolve sulphides along with the metals they store.
Abstract: The Guli and Bor-Uryakh massifs, a part of the Siberian Large igneous province (LIP) are mafic-ultramafic intrusive complexes, withstrongalkaline affinity. They contain deposits of apatite and arealsoknown to be source rocks ofOs-Ir-Ruplacers.These massifs are of great interest for petrologists worldwide, as they are composed of an unusual variety of rocks (dunites/olivinites, shonkinites, melilitites, alkali syenites and carbonatites) and being coeval with Siberian trap volcanic rocks, includingdiamondiferous kimberlites. Since mineralogical approaches based on spinel-group minerals have been proved to be efficient in constraining origin of the ultramafics, we present the first descriptive study of chromite and magnetite mineralization, observed in olivine-dominated rocks of the Guli and Bor-Uryakh intrusions. In dunites of Guli massif spinel-group minerals are dominated by Mg-poor chromite (FeMg)Cr2O4and Cr-Ti-rich magnetiteFeFe2O4, while in Bor-Uryakh massif spinel-group minerals are predominantly magnetite with only minor Mg-poor chromite.These minerals form either small euhedral inclusions in olivine or largesubhedral to anhedral grains in serpentinized fractures and interstitial space. The lattertype of grainscan have intricated irregular shapeand contain inclusions. We also observed abundant Cr-magnetite lamellae in olivine and chromite/magnetite micro-grains within olivine-hosted multiphase inclusions.Spinel (MgAl2O4) is occasionally found in intergrowths with chromite and magnetite.The obtained data show that spinel-group minerals in the massifsdo not correspond to primary-magmatic varieties and suggestextensive alteration during post-magmatic processes. Textural and chemical evidenceof substantial modification of initially-cumulative lithologies of Guli and Bor-Uryakh massifsfavorsmeta-magmatic origin for these massifs.
Geochemical Perspectives Letters, Vol. 18, pp. 11-15. pdf
Russia, Siberia
carbonatite
Abstract: For the last two decades, the end of the voluminous phase of eruptions of the Siberian Traps large igneous province has been constrained by a U-Pb date of discordant baddeleyite collected from the Guli carbonatite intrusion with the assumption that the discordance resulted from unsupported 207Pb. In this study we have re-analysed baddeleyite from the same intrusion and found two types of discordance: (1) due to 207Pb-excess, and (2) radiogenic lead loss from high U mineral inclusions. The former implies that baddeleyite is an efficient scavenger of protactinium during crystallisation, leaving the magma depleted in this element. Together with a published high precision U-Pb date of 252.24?±?0.08 Ma for the Arydzhansky Formation, our new date of 250.33?±?0.38 Ma for the Guli carbonatite constrains the total duration of the voluminous eruptions of the Siberian Traps LIP at 1.91?±?0.38 million years. The lower intercept of the (231Pa)/(235U) corrected discordance line yields a date of 129.2?±?65.0 Ma, which points to the widespread Early Cretaceous rifting in East and Central Asia.
Abstract: Reconstructing the original composition of kimberlite melts in the mantle and delineating the processes that modify them during magmatic ascent and emplacement in the crust remains a significant challenge in kimberlite petrology. One of the most significant processes commonly cited to drive initial kimberlite melts towards more Si-Mg-rich compositions and decrease the solubility of CO2 is the assimilation of mantle orthopyroxene. However, there is limited direct evidence to show the types of reactions that may occur between mantle orthopyroxene and the host kimberlite melt. To provide new constraints on the interaction between orthopyroxene and parental kimberlite melts, we examined a fresh (i.e. unmodified by secondary/post-magmatic alteration) orthopyroxenite xenolith, which was recovered from the serpentine-free units of the Udachnaya-East kimberlite (Siberian Craton, Russia). This xenolith is composed largely of orthopyroxene (~ 90%), along with lesser olivine and clinopyroxene and rare aluminous magnesian chromite. We can show that this xenolith was invaded by the host kimberlite melt along grain interstices and fractures, where it partially reacted with orthopyroxene along the grain boundaries and replaced it with aggregates of compositionally distinct clinopyroxene, olivine and phlogopite, along with subordinate Fe-Cr-Mg spinel, Fesingle bondNi sulphides and djerfisherite (K6(Fe,Ni,Cu)25S26Cl). Primary melt inclusions in clinopyroxene replacing xenolith-forming orthopyroxene, as well as secondary melt inclusion trails in xenolith orthopyroxene, clinopyroxene and olivine are composed of similar daughter mineral assemblages that consist largely of: Nasingle bondK chlorides, along with varying proportions of phlogopite, Fe-Cu-Ni sulphides, djerfisherite, rasvumite (KFe2S3), Cr-Fe-Mg spinel, nepheline and apatite, and rare rutile, sodalite, barite, olivine, Ca-K-Na carbonates and Nasingle bondK sulphates. The melt entrapped by these inclusions likely represent the hybrid products produced by the invading kimberlite melt reacting with orthopyroxene in the xenolith. The mechanism that could explain the partial replacement of orthopyroxene in this xenolith by clinopyroxene, olivine and phlogopite could be attributed to the following reaction: Orthopyroxene + Carbonatitic (melt) ? Olivine + Clinopyroxene + Phlogopite + CO2. This reaction is supported by theoretical and experimental studies that advocate the dissolution of mantle orthopyroxene within an initially silica-poor and carbonate-rich kimberlite melt. The mineral assemblages replacing orthopyroxene in the xenolith, together with hosted melt inclusions, suggests that the kimberlitic melt prior to reaction with orthopyroxene was likely carbonate-rich and Na-K-Cl-S bearing. The paucity of carbonate in the reaction zones around orthopyroxene and in melt inclusions in clinopyroxene replacing xenolith-forming orthopyroxene and xenolith minerals (orthopyroxene, clinopyroxene and olivine) is attributed to the consumption of carbonates and subsequent exsolution of CO2 by the proposed decarbonation reaction. Concluding, we propose that this orthopyroxenite xenolith provides a rare example of the types of reactions that can occur between mantle orthopyroxene and the host kimberlite melt. The preservation of this xenolith and zones around orthopyroxene present new insights into the composition and evolution of parental kimberlite melts and CO2 exsolution.
Geochemical Perspectives Letters, Vol. 18, pp. 11-15. pdf
Russia, Siberia
deposit - Guli
Abstract: For the last two decades, the end of the voluminous phase of eruptions of the Siberian Traps large igneous province has been constrained by a U-Pb date of discordant baddeleyite collected from the Guli carbonatite intrusion with the assumption that the discordance resulted from unsupported 207Pb. In this study we have re-analysed baddeleyite from the same intrusion and found two types of discordance: (1) due to 207Pb-excess, and (2) radiogenic lead loss from high U mineral inclusions. The former implies that baddeleyite is an efficient scavenger of protactinium during crystallisation, leaving the magma depleted in this element. Together with a published high precision U-Pb date of 252.24?±?0.08 Ma for the Arydzhansky Formation, our new date of 250.33?±?0.38 Ma for the Guli carbonatite constrains the total duration of the voluminous eruptions of the Siberian Traps LIP at 1.91?±?0.38 million years. The lower intercept of the (231Pa)/(235U) corrected discordance line yields a date of 129.2?±?65.0 Ma, which points to the widespread Early Cretaceous rifting in East and Central Asia.
Lithos, Vol. 406-407. doi: 10.1016/j.lithos.2021.106528 12p. Pdf
Russia
deposit - Azov
Abstract: Zircon megacrysts are commonly found in kimberlites and, together with olivine, low-Cr garnet, pyroxene, phlogopite, and ilmenite megacrysts, they constitute a mineral assemblage known as the "low-Cr suite". The generally close similarity of ages and similar isotope geochemical characteristics of megacrysts and matrix minerals in the host kimberlites support a cognate origin. However, alteration rims commonly develop on zircon and ilmenite megacrysts, providing evidence for a lack of chemical equilibrium between the megacrysts and kimberlitic melts. Here, we report results of a detailed geochronological and geochemical study of zircon megacrysts found in the Middle Devonian Novolaspa kimberlite pipe and dyke located in the Azov Domain of the Ukrainian Shield. The concordia age of zircons is 397.0 ± 2.0 Ma, and it is 14 m.y. older than the age of kimberlite emplacement as defined by a Rb-Sr isochron on phlogopite. The average ?Hf(397) value for unaltered zircon megacrysts is 6.8 ± 0.14, with the alteration rims having similar Hf isotope systematics. These hafnium isotope data indicate a moderately depleted mantle source for zircon. Unaltered megacrystic zircons have low abundances of trace elements and fractionated REE, with pronounced positive Ce/Ce* anomalies and almost no Eu/Eu* anomalies. In contrast, alteration rims have very high and variable concentrations of trace elements, indicating a reaction between zircon and kimberlite melt. The melt or fluid responsible for zircon and ilmenite megacryst formation, in contrast to kimberlitic melt, was poor in incompatible trace elements, except for the HFSE (Zr, Hf, Nb, Ta, and Ti). The oxygen fugacity during crystallization of the megacryst suite was close to the FMQ buffer. Azov zircon megacrysts do not demonstrate close geochronological and isotope-geochemical similarities with their host kimberlites. They are cognate in the broad sense of being related to the same plume event, but their direct affinity is not clearly defined. The megacryst suite may have crystallized from the earliest melts/fluids that separated from the ascending mantle plume, whereas kimberlite magmas were emplaced 14 m.y. after this event.
Abstract: Zircon megacrysts are commonly found in kimberlites and, together with olivine, low-Cr garnet, pyroxene, phlogopite, and ilmenite megacrysts, they constitute a mineral assemblage known as the “low-Cr suite”. The generally close similarity of ages and similar isotope geochemical characteristics of megacrysts and matrix minerals in the host kimberlites support a cognate origin. However, alteration rims commonly develop on zircon and ilmenite megacrysts, providing evidence for a lack of chemical equilibrium between the megacrysts and kimberlitic melts. Here, we report results of a detailed geochronological and geochemical study of zircon megacrysts found in the Middle Devonian Novolaspa kimberlite pipe and dyke located in the Azov Domain of the Ukrainian Shield. The concordia age of zircons is 397.0 ± 2.0 Ma, and it is 14 m.y. older than the age of kimberlite emplacement as defined by a Rb-Sr isochron on phlogopite. The average ?Hf(397) value for unaltered zircon megacrysts is 6.8 ± 0.14, with the alteration rims having similar Hf isotope systematics. These hafnium isotope data indicate a moderately depleted mantle source for zircon. Unaltered megacrystic zircons have low abundances of trace elements and fractionated REE, with pronounced positive Ce/Ce* anomalies and almost no Eu/Eu* anomalies. In contrast, alteration rims have very high and variable concentrations of trace elements, indicating a reaction between zircon and kimberlite melt. The melt or fluid responsible for zircon and ilmenite megacryst formation, in contrast to kimberlitic melt, was poor in incompatible trace elements, except for the HFSE (Zr, Hf, Nb, Ta, and Ti). The oxygen fugacity during crystallization of the megacryst suite was close to the FMQ buffer. Azov zircon megacrysts do not demonstrate close geochronological and isotope-geochemical similarities with their host kimberlites. They are cognate in the broad sense of being related to the same plume event, but their direct affinity is not clearly defined. The megacryst suite may have crystallized from the earliest melts/fluids that separated from the ascending mantle plume, whereas kimberlite magmas were emplaced 14 m.y. after this event.
Abstract: Carbonatites are unique, enigmatic, and controversial rocks directly sourced from, or evolved from, mantle melts. Mineral proportions and chemical compositions of carbonatites are highly variable and depend on a wide range of processes: melt generation, liquid immiscibility, fractional crystallization, and post-magmatic alteration. Observations of plutonic carbon-atites and their surrounding metasomatic rocks (fenites) suggest that carbon-atite intrusions and volcanic rocks do not fully represent the true compositions of the parental carbonatite melts and fluids. Carbonatites are enriched in rare elements, such as niobium and rare earths, and may host deposits of these elements. Carbonatites are also important for understanding the carbon cycle and mantle evolution.
Contributions to Mineralogy and Petrology, Vol. 177, 4. 10.1007/s00410-022-01910-z
Mantle
water
Abstract: Oxidized fluids in the subduction zone may convert polyvalent elements in the mantle to their higher valence states. The most abundant polyvalent element in the mantle is Fe, a significant part of which is contained in olivine as Fe2+. Results of the study of arc mantle xenoliths, in lab high-pressure-high-temperature experiments, and thermodynamic modeling have shown that at pressures of?~?50-2000 MPa and temperatures of 1000-1250 °C, well above the serpentine stability field, Fe2+ from olivine reacts with free aqueous fluid according to the following simplified reaction: 3Fe2SiO4?+?2H2O???3SiO2?+?2Fe3O4?+?2H2. The resulting ferric iron is preserved in spinel of a certain composition, (Mg,Fe2+)Fe3+2O4, whereas new high-Mg olivine, with magnesium number up to 96 in natural samples and 99.9 in experiments, forms in the reaction zone. SiO2 produced in the reaction either dissolves in the fluid or, with a small amount of water, reacts with olivine to form orthopyroxene as follows: (Mg,Fe)2SiO4?+?SiO2?=?(Mg,Fe)2Si2O6. The released H2 may decrease the oxidation state of polyvalent elements present in the fluid (e.g., S4+, S6+). Traces of high-temperature water-olivine interaction appear as swarms of fluid-spinel inclusions and are ubiquitous in olivine from ultramafic arc xenoliths. The described process is similar to serpentinization but occurs at higher pressure and temperature conditions and yields different reaction products. The reducing capacity of olivine is relatively low; however, given the large volume of mantle (and crustal) peridotites, the overall effect may be significant.
Abstract: The petrogenesis of kimberlites commonly is obscured by interaction with hydrothermal fluids, including deuteric (late-magmatic) and/or groundwater components. To provide new constraints on the modification of kimberlite rocks during overprinting by such fluids and on the fractionation of kimberlite magmas during crystallisation, we have undertaken a detailed petrographic and geochemical study of a hypabyssal sample (BK) from the Bultfontein kimberlite (Kimberley, South Africa).
India's changing place in global Proterozoic reconstructions: a review of geochronologic constraints and paleomagnetic poles from the Dharwar Bundelk hand and Marwar
Journal of Geodynamics, Vol. 50, 3-4, pp. 224-242.
Paleomagnetic and geochronological studies of the mafic dyke swarms of Bundelk hand craton, central India: implications for the tectonic evolution and paleogeographic reconstructions.
On the stability of thermal stratification of highly compressible fluids with depth dependent physical properties: implications for the mantle convection.
Geophysical Journal International, Vol. 195, 3, pp. 1443-1454.
Journal of Geophysical Research, Vol. 123, 7, pp. 5644-5660.
Africa, east Africa
geophysics - seismic
Abstract: Although the East African rift system formed in cratonic lithosphere above a large?scale mantle upwelling, some sectors have voluminous magmatism, while others have isolated, small?volume eruptive centers. We conduct teleseismic shear wave splitting analyses on data from 5 lake?bottom seismometers and 67 land stations in the Tanganyika?Rukwa?Malawi rift zone, including the Rungwe Volcanic Province (RVP), and from 5 seismometers in the Kivu rift and Virunga Volcanic Province, to evaluate rift?perpendicular strain, rift?parallel melt intrusion, and regional flow models for seismic anisotropy patterns beneath the largely amagmatic Western rift. Observations from 684 SKS and 305 SKKS phases reveal consistent patterns. Within the Malawi rift south of the RVP, fast splitting directions are oriented northeast with average delays of ~1 s. Directions rotate to N?S and NNW north of the volcanic province within the reactivated Mesozoic Rukwa and southern Tanganyika rifts. Delay times are largest (~1.25 s) within the Virunga Volcanic Province. Our work combined with earlier studies shows that SKS?splitting is rift parallel within Western rift magmatic provinces, with a larger percentage of null measurements than in amagmatic areas. The spatial variations in direction and amount of splitting from our results and those of earlier Western rift studies suggest that mantle flow is deflected by the deeply rooted cratons. The resulting flow complexity, and likely stagnation beneath the Rungwe province, may explain the ca. 17 Myr of localized magmatism in the weakly stretched RVP, and it argues against interpretations of a uniform anisotropic layer caused by large?scale asthenospheric flow or passive rifting.
Effects of differential reactivity of minerals on the development of brittle to semi-brittle structures in granitic rocks: textural and oxygen isotope evidence
Abstract: Geological mapping and zircon U-Pb/Hf isotope data from 35 samples from the central Tanzania Craton and surrounding orogenic belts to the south and east allow a revised model of Precambrian crustal evolution of this part of East Africa. The geochronology of two studied segments of the craton shows them to be essentially the same, suggesting that they form a contiguous crustal section dominated by granitoid plutons. The oldest orthogneisses are dated at ca. 2820 Ma (Dodoma Suite) and the youngest alkaline syenite plutons at ca. 2610 Ma (Singida Suite). Plutonism was interrupted by a period of deposition of volcano-sedimentary rocks metamorphosed to greenschist facies, directly dated by a pyroclastic metavolcanic rock which gave an age of ca. 2725 Ma. This is supported by detrital zircons from psammitic metasedimentary rocks, which indicate a maximum depositional age of ca. 2740 Ma, with additional detrital sources 2820 and 2940 Ma. Thus, 200 Ma of episodic magmatism in this part of the Tanzania Craton was punctuated by a period of uplift, exhumation, erosion and clastic sedimentation/volcanism, followed by burial and renewed granitic to syenitic magmatism. In eastern Tanzania (Handeni block), in the heart of the East African Orogen, all the dated orthogneisses and charnockites (apart from those of the overthrust Neoproterozoic granulite nappes), have Neoarchaean protolith ages within a narrow range between 2710 and 2630 Ma, identical to (but more restricted than) the ages of the Singida Suite. They show evidence of Ediacaran "Pan-African" isotopic disturbance, but this is poorly defined. In contrast, granulite samples from the Wami Complex nappe were dated at ca. 605 and ca. 675 Ma, coeval with previous dates of the "Eastern Granulites" of eastern Tanzania and granulite nappes of adjacent NE Mozambique. To the south of the Tanzania Craton, samples of orthogneiss from the northern part of the Lupa area were dated at ca. 2730 Ma and clearly belong to the Tanzania Craton. However, granitoid samples from the southern part of the Lupa "block" have Palaeoproterozoic (Ubendian) intrusive ages of ca. 1920 Ma. Outcrops further south, at the northern tip of Lake Malawi, mark the SE continuation of the Ubendian belt, albeit with slightly younger ages of igneous rocks (ca. 1870-1900 Ma) which provide a link with the Ponte Messuli Complex, along strike to the SE in northern Mozambique. In SW Tanzania, rocks from the Mgazini area gave Ubendian protolith ages of ca. 1980-1800 Ma, but these rocks underwent Late Mesoproterozoic high-grade metamorphism between 1015 and 1040 Ma. One granitoid gave a crystallisation age of ca. 1080 Ma correlating with known Mesoproterozoic crust to the east in SE Tanzania and NE Mozambique. However, while the crust in the Mgazini area was clearly one of original Ubendian age, reworked and intruded by granitoids at ca. 1 Ga, the crust of SE Tanzania is a mixed Mesoproterozoic terrane and a continuation from NE Mozambique. Hence the Mgazini area lies at the edge of the Ubendian belt which was re-worked during the Mesoproterozoic orogen (South Irumide belt), providing a further constraint on the distribution of ca. 1 Ga crust in SE Africa. Hf data from near-concordant analyses of detrital zircons from a sample from the Tanzania Craton lie along a Pb-loss trajectory (Lu/Hf = 0), extending back to ?3.9 Ga. This probably represents the initial depleted mantle extraction event of the cratonic core. Furthermore, the Hf data from all igneous samples, regardless of age, from the entire study area (including the Neoproterozoic granulite nappes) show a shallow evolution trend (Lu/Hf = 0.028) extending back to the same mantle extraction age. This implies the entire Tanzanian crust sampled in this study represents over 3.5 billion years of crustal reworking from a single crustal reservoir and that the innermost core of the Tanzanian Craton that was subsequently reworked was composed of a very depleted, mafic source with a very high Lu/Hf ratio. Our study helps to define the architecture of the Tanzanian Craton and its evolution from a single age-source in the early Eoarchaean.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 10, pp. 3436-3455.
Mantle
Geophysics - seismics
Abstract: Relating seismic anisotropy to mantle flow requires detailed understanding of the development and evolution of olivine crystallographic preferred orientation (CPO). Recent experimental and field studies have shown that olivine CPO evolution depends strongly on the integrated deformation history, which may lead to differences in how the corresponding seismic anisotropy should be interpreted. In this study, two widely used numerical models for CPO evolution—D-Rex and VPSC—are evaluated to further examine the effect of deformation history on olivine texture and seismic anisotropy. Building on previous experimental work, models are initiated with several different CPOs to simulate unique deformation histories. Significantly, models initiated with a preexisting CPO evolve differently than the CPOs generated without preexisting texture. Moreover, the CPO in each model evolves differently as a function of strain. Numerical simulations are compared to laboratory experiments by Boneh and Skemer (2014). In general, the D-Rex and VPSC models are able to reproduce the experimentally observed CPOs, although the models significantly over-estimate the strength of the CPO and in some instances produce different CPO from what is observed experimentally. Based on comparison with experiments, recommended parameters for D-Rex are: M*?=?10, ?*?=?5, and ??=?0.3, and for VPSC: ??=?10-100. Numerical modeling confirms that CPO evolution in olivine is highly sensitive to the details of the initial CPO, even at strains greater than 2. These observations imply that there is a long transient interval of CPO realignment which must be considered carefully in the modeling or interpretation of seismic anisotropy in complex tectonic settings.
Abstract: In addition to a series of finds of diamond in mafic volcanic and ultramafic massive rocks in Kamchatka, Russia, a carbonado-like diamond aggregate was identified in recent lavas of the active Avacha volcano. This aggregate differs from ‘classic carbonado’ by its location within an active volcanic arc, well-formed diamond crystallites, and cementing by Si-containing aggregates rather than sintering. The carbonado-like aggregate contains inclusions of Mn-Ni-Si-Fe alloys, native ?-Mn, tungsten and boron carbides, which are uncommon for both carbonado and monocrystalline diamonds. Mn-Ni-Si-Fe alloys, trigonal W2C and trigonal B4C are new mineral species that were not previously found in the natural environment. The formation of the carbonado-like diamond aggregate started with formation at ~ 850-1000 °C of tungsten and boron carbides, Mn-Ni-Si-Fe alloys and native ?-Mn, which were used as seeds for the subsequent crystallization of micro-sized diamond aggregate. In the final stage, the diamond aggregate was cemented by amorphous silica, tridymite, ?-SiC, and native silicon. The carbonado-like aggregate was most likely formed at near-atmospheric pressure conditions via the CVD mechanism during the course or shortly after one of the volcanic eruption pulses of the Avacha volcano. Volcanic gases played a great role in the formation of the carbonado-like aggregate.
Geochemistry International, Vol. 57, 9, pp. 1015-1023.
South America, Brazil, Africa, Central African Republic, Russia
carbonado
Abstract: Structural peculiarities of several types of cryptocrystalline diamond varieties: carbonado, impact-related yakutite and cryptocrystalline diamond aggregates from kimberlite were studied using Infrared spectroscopy, X-ray diffraction contrast (DCT—Diffraction Contrast Tomography) and phase contrast tomography (PCT). It is shown that the porosity of the carbonado and kimberlitic cryptocrystalline aggregates is similar being in range of 5-10 vol %, possibly indicating similar formation mechanism(s), whereas that of yakutite is essentially zero. Crystallographic texture is observed for some carbonado samples. It is suggested that at least partially the texture is explained by deformation-related bands. Infrared spectroscopy reveals presence of hydrous and, probably, of hydrocarbon species in carbonado.
Geophysical Research Letters, Vol. 45, 24, pp. 13,298-13,305.
Mantle
subduction
Abstract: A subduction zone's mantle wedge can have a complex pattern of seismic anisotropy where the fast direction often rotates from trench?parallel close to the trench to trench?normal in the backarc. This pattern can be interpreted as induced by either 3?D trench?parallel flow or by the presence of water close to the trench. Almost all models so far favored the trench?parallel flow hypothesis, usually based on indirect or complementary indicators such as the evolution of geochemical signatures of volcanoes along the arc. Here we examine a seismic anisotropy observational signature that can be used to discriminate between the two explanations. The concept is defined using an interdisciplinary approach linking a direct modeling of the flow in the subduction wedge and a computation of seismic wave propagation in anisotropic media. We define a unique water?induced signature that is the presence of a “morph zone” characterized by a weak anisotropy and a decrease of seismic velocities. We apply the model to the Lau Basin where we find this predicted signature, demonstrating for the first time that water rather than trench?parallel flow is responsible for the observed anisotropy pattern there.
Exploration Geophysics , http://dx.doi.org/10.1071/EG16015 10p. Available
Russia
Deposit Amakinskaya, Geophysics
Abstract: There have been multiple occurrences in the literature in the past several years of what has been referred to as the induced polarisation (IP) effect in airborne time domain electromagnetic (TDEM) data. This phenomenon is known to be responsible for incorrect inversion modelling of electrical resistivity, lower interpreted depth of investigation (DOI) and lost information about chargeability of the subsurface and other valuable parameters. Historically, there have been many suggestions to account for the IP effect using the Cole-Cole model. It has been previously demonstrated that the Cole-Cole model can be effective in modelling synthetic TDEM transients. In the current paper we show the possibility of extracting IP information from airborne TDEM data using this same concept, including inverse modelling of chargeability from TDEM data collected by VTEM, with field examples from Canada (Mt Milligan deposit) and Russia (Amakinskaya kimberlite pipe).
Abstract: A VTEM survey was flown over the Drybones kimberlite in 2005, followed by a ZTEM survey in 2009. These data sets were inverted on multiple previous occasions using various 1D, 2D, 3D and plate modelling algorithms. VTEM data showed AIP effects, manifested as negative voltages and otherwise skewed transients. This created artefacts in conventional inversions of VTEM data, which showed some inconsistencies with ZTEM inversions, as well as with the known geology. In 2015 the VTEM data were transferred to Aarhus Geophysics, reprocessed and reinverted using the modified "AarhusINV" code with Cole-Cole modelling. The results are presented in current abstract, they appear to be more interpretable and provide better data fit, than previous inversion attempts.
Abstract: Induced polarization (IP) effects are becoming more evident in time-domain helicopter airborne electromagnetic (AEM) data thanks to advances in instrumentation, mainly due to improvements in the signal-to-noise ratio and hence better data quality. Although the IP effects are often manifested as negative receiver voltage values, which are easy to detect, in some cases, IP effects can distort recovered transients in other ways so they may be less obvious and require careful data analysis and processing. These effects represent a challenge for modeling and inversion of the AEM data. For proper modeling of electromagnetic transients, the chargeability of the subsurface and other parameters describing the dispersion also need to be taken into consideration. We use the Cole-Cole model to characterize the dispersion and for modeling of the IP effects in field AEM data, collected by different airborne systems over different geologies and exploration targets, including examples from diamond, gold, and base metal exploration.
Abstract: We present the joint interpretation of airborne electromagnetic and aeromagnetic data, acquired to study kimberlite pipes. We analyse the data surveyed in 2005 over Drybones Bay, Archean Slave Province of the Northwest Territories, northern Canada. This area hosts a recently discovered kimberlite province with >150 kimberlite pipes. Magnetic and electromagnetic data were each one modelled by 1D inversion. For magnetic data we inverted vertical soundings built through upward continuations of the measured data at various altitudes. The validity of the method was prior verified by tests on synthetic data. Electromagnetic data were processed and inverted using the modified AarhusINV code, with Cole-Cole modelling, in order to take into account induced polarization effects, consisting in negative voltages and otherwise skewed transients. The integrated study of the two kinds of data has led to a better understanding of the structures at depth, even though the comparison between the magnetic and the electromagnetic models shows the different sensitivity of the two methods with respect to the geological structure at Drybones Bay.
Abstract: We have developed a synthetic multiparametric modeling and inversion exercise undertaken to study the robustness of inverting airborne time-domain electromagnetic (TDEM) data to extract Cole-Cole parameters. The following issues were addressed: nonuniqueness, ill posedness, dependency on manual processing and the effect of constraints, and a priori information. We have used a 1D layered earth model approximation and lateral constraints. Synthetic simulations were performed for several models and the corresponding Cole-Cole parameters. The possibility to recover these models by means of laterally constrained multiparametric inversion was evaluated, including recovery of chargeability distributions from shallow and deep targets based on analysis of induced polarization (IP) effects, simulated in airborne TDEM data. Different scenarios were studied, including chargeable targets associated with the conductive and resistive environments. In particular, four generic models were considered for the exercise: a sulfide model, a kimberlite model, and two generic models focusing on the depth of investigation.
Silversmit, G., Vekemans, B., Appel, K., Schmitz, S., Schoonjans, T., Brenker, F.E., Kaminsky, F., Vincze, L.
Three dimensional Fe speciation of an inclusion cloud within an ultradeep diamond by confocal u-x-ray absortion near edge structure: evidence for late stage
Mineralogy and Petrology, DOI 10. 1007/s00710-015-0401-7
South America, Brazil, Mato Grosso
Juina area
Abstract: Two carbonatitic mineral assemblages, calcite + wollastonite and calcite + monticellite, which are encapsulated in two diamond grains from the Rio Soriso basin in the Juina area, Mato Grosso State, Brazil, were studied utilizing the NanoSIMS technique. The assemblages were formed as the result of the decomposition of the lower-mantle assemblage calcite + CaSi-perovskite + volatile during the course of the diamond ascent under pressure conditions from 15 to less than 0.8 GPa. The oxygen and carbon isotopic compositions of the studied minerals are inhomogeneous. They fractionated during the process of the decomposition of primary minerals to very varying values: ?18O from ?3.3 to +15.4?‰SMOW and ?13C from ?2.8 to +9.3?VPDB. These values significantly extend the mantle values for these elements in both isotopically-light and isotopically-heavy areas.
Geophysical Research Abstracts, Vol. 19, EGRU2017-1751, April 1p.
Mantle
Diamond, inclusions, nitrogen
Abstract: A few years ago a series of iron carbides Fe3C, Fe2C, Fe7C3 and Fe23C6 (haxonite) containing up to 7.3-9.1 at.% N (N/(N+C) = 0.19-0.27) was identi?ed as inclusions in diamonds from the Juina area, Brazil in association with native iron and graphite (Kaminsky and Wirth, 2011). Subsequently nitrocarbides and carbonitrides Fe3(C,N) and Fe9(C,N)4 (nitroyarlongite) containing 12.8-18.42 at.% N (N/(N+C) = 0.37-0.60) were identi?ed in a lower-mantle microxenolith in association with ferropericlase and two post-spinel oxides Mg-Cr-Fe-O (CT phase; Mg-xieite) and Ca-Cr-O (new mineral) with an orthorhombic structure (Kaminsky et al., 2015). Recently pure nitrides Fe3N with a trigonal structure P312 and Fe2N with an orthorhombic structure Pbcn were identi?ed among mineral inclusions from diamonds in the same area. They have admixtures of Cr (0.68-1.8 at.%), Ni (0.35-0.93 at.%) and Mn (0-1.22 at.%). Fe2N contains also an admixture of 5.1-7.6 at.% Si. The nitrides associate with nitroyarlongite Fe9(N0.8C0.2)4 and iron carbide Fe7C3, which contain nanocrystals of moissanite, hexagonal 6H polytype of SiC. Fe7C3 crystallizes, in the Fe-C system, the ?rst in association with diamond at pressures starting from 130 GPa, i.e. within the lowermost mantle, the D[U+02BA] layer. Native iron and a series of nitride-carbonitride-nitrocarbide-carbides associated with Fe7C3 form as a result of in?ltration of the Fe-Ni melt from the outer core into the lowermost mantle. This melt contains up to 10 % light elements, such as C, N, O and Si, which may be the source of nitrides-carbides. The existence of nitrides in the lower mantle helps to solve the problem of ‘missing nitrogen’ in the Earth’s nitrogen balance and consider the Earth’s core as the major reservoir of nitrogen. According to calculations, the total amount of nitrogen in the Earth’s core is 9,705 ×1021 grams, and in the mantle ?500 ×1021 grams (95 % and 4.5 % of the total amount of nitrogen respectively). In such a case the average concentration of nitrogen in the Earth is ?1,710 ppm, which is similar to the concentration of nitrogen in chondrites.
European Geosciences Union General Assembly 2017, Vienna April 23-28, 1p. 1751 Abstract
Mantle
Diamond inclusions
Abstract: A few years ago a series of iron carbides Fe3C, Fe2C, Fe7C3 and Fe23C6 (haxonite) containing up to 7.3-9.1 at.% N (N/(N+C) = 0.19-0.27) was identified as inclusions in diamonds from the Juina area, Brazil in association with native iron and graphite (Kaminsky and Wirth, 2011). Subsequently nitrocarbides and carbonitrides Fe3(C,N) and Fe9(C,N)4 (nitroyarlongite) containing 12.8-18.42 at.% N (N/(N+C) = 0.37-0.60) were identified in a lower-mantle microxenolith in association with ferropericlase and two post-spinel oxides Mg-Cr-Fe-O (CT phase; Mg-xieite) and Ca-Cr-O (new mineral) with an orthorhombic structure (Kaminsky et al., 2015). Recently pure nitrides Fe3N with a trigonal structure P312 and Fe2N with an orthorhombic structure Pbcn were identified among mineral inclusions from diamonds in the same area. They have admixtures of Cr (0.68-1.8 at.%), Ni (0.35-0.93 at.%) and Mn (0-1.22 at.%). Fe2N contains also an admixture of 5.1-7.6 at.% Si. The nitrides associate with nitroyarlongite Fe9(N0.8C0.2)4 and iron carbide Fe7C3, which contain nanocrystals of moissanite, hexagonal 6H polytype of SiC. Fe7C3 crystallizes, in the Fe-C system, the first in association with diamond at pressures starting from 130 GPa, i.e., within the lowermost mantle, the D? layer. Native iron and a series of nitride-carbonitride-nitrocarbide-carbides associated with Fe7C3 form as a result of infiltration of the Fe-Ni melt from the outer core into the lowermost mantle. This melt contains up to 10 % light elements, such as C, N, O and Si, which may be the source of nitrides-carbides. The existence of nitrides in the lower mantle helps to solve the problem of 'missing nitrogen' in the Earth's nitrogen balance and consider the Earth's core as the major reservoir of nitrogen. According to calculations, the total amount of nitrogen in the Earth's core is 9,705 × 1021 grams, and in the mantle 500 × 1021 grams (95 % and 4.5 % of the total amount of nitrogen respectively). In such a case the average concentration of nitrogen in the Earth is 1,710 ppm, which is similar to the concentration of nitrogen in chondrites. References 1. Kaminsky, F. V., Wirth, R. (2011) Iron carbide inclusions in lower-mantle diamond from Juina, Brazil. Canadian Mineralogist 49(2), 555-572. 2. Kaminsky, F. V., Wirth, R., Schreiber, A. (2015) A microinclusion of lower-mantle rock and some other lower-mantle inclusions in diamond.
Abstract: The first finds of iron nitrides and carbonitride as inclusions in lower-mantle diamond from Rio Soriso, Brazil, are herein reported. These grains were identified and studied with the use of transmission electron microscopy (TEM), electron diffraction analysis (EDX), and electron energy loss spectra (EELS). Among nitrides, trigonal Fe3N and orthorhombic Fe2N are present. Carbonitride is trigonal Fe9(N0.8C0.2)4. These mineral phases associate with iron carbide, Fe7C3, silicon carbide, SiC, Cr-Mn-Fe and Mn-Fe oxides; the latter may be termed Mn-rich xieite. Our identified finds demonstrate a wide field of natural compositions from pure carbide to pure nitride, with multiple stoichiometries from M5(C,N)3 to M23(C,N)6 and with M/(C,N) from 1.65 to 3.98. We conclude that the studied iron nitrides and carbonitrides were formed in the lowermost mantle as the result of the infiltration of liquid metal, containing light elements from the outer core into the D? layer, with the formation of the association: native Fe0 + iron nitrides, carbides, and transitional compounds + silicon carbide. They indicated that major reservoirs of nitrogen should be expected in the core and in the lowermost mantle, providing some solution to the problem of nitrogen balance in the Earth
Abstract: A series of polycrystalline diamond grains were found within the Valizhgen Peninsula in Koryakia, northern Kamchatka, Russia. A grain from the Aynyn River area is studied in detail with TEM. Diamond crystallites, 2-40 ?m in size are twinned and have high dislocation density. They are cemented with tilleyite Ca5(Si2O7)(CO3)2, SiC, Fe-Ni-Mn-Cr silicides, native silicon, graphite, calcite, and amorphous material. Among SiC grains, three polymorphs were discriminated: hexagonal 4H and 6H and cubic C3 (?-SiC). Silicides have variable stoichiometry with (Fe,Ni,Mn,Cr)/Si = 0.505-1.925. Native silicon is an open-framework allotrope of silicon S24, which has been observed, to date, as a synthetic phase only; this is a new natural mineral phase. Three types of amorphous material were distinguished: a Ca-Si-C-O material, similar in composition to tilleyite; amorphous carbon in contact with diamond, which includes particles of crystalline graphite; and amorphous SiO2. No regularity in the distribution of the amorphous material was observed. In the studied aggregate, diamond crystallites and moissanite are intensively twinned, which is characteristic for these minerals formed by gas phase condensation or chemical vapor deposition (CVD) processes. The synthetic analogs of all other cementing compounds (?-SiC, silicides, and native silicon) are typical products of CVD processes. This confirms the earlier suggested CVD mechanism for the formation of Avacha diamond aggregates. Both Avacha and Aynyn diamond aggregates are related not to "classic" diamond locations within stable cratons, but to areas of active and Holocene volcanic belts. The studied diamond aggregates from Aynyn and Avacha, by their mineralogical features and by their origin during the course of volcanic eruptions via a gas phase condensation or CVD mechanism, may be considered a new variety of polycrystalline diamond and may be called "kamchatite". Kamchatite extends the number of unusual diamond localities. It increases the potential sources of diamond and indicates the polygenetic character of diamond.
Mineralogy and Petrology, doi.org/10.1007/ s00710-020-00732-w 12p. Pdf
Europe, Ukraine
diamond morphology
Abstract: Among placer diamond occurrences in Ukraine, a group of microdiamonds have been distinguished that have specific morphological, color and spectral characteristics, not observed in other natural diamonds. These diamonds, termed "Dniester-type diamonds", have tetrahexahedroidal and rhombododecahedroidal morphologies, green coloration, and high concentrations of single-atom, unaggregated nitrogen in the form of C-centers (66-74% of all N atoms), along with low ratios of nitrogen aggregation (0-13% agrregation ratio) and high total nitrogen content (892-1493 atomic ppm). With these characteristics, Dniester-type diamonds are approximate the Type Ib-Iab classification. The predominance of single-atom, unaggregated nitrogen indicates a short residence time under high-temperature conditions. These Dniester-type diamonds have a narrow range of carbon isotopic compositions, from ?¹³? = -10.52‰ VPDB t? -12.82‰ VPDB (average ?¹³? = -11.85‰ VPDB). They are distributed in Quaternary and Neogene sediments of the southwestern part of the Ukrainian Shield. This distribution forms a local halo within the Dniester and Southern Bug rivers interfluve and Black Sea beach sediments, approximately 650 km in length. This implies their endemic character and the likely nearby presence of primary source(s) of unknown, possibly non-kimberlitic type.
Structural and microstructual regularities of the distribution of diamond in metamorphic rocks of the Kumdy-Kol and Barchi-Kol deposits, Kokchetav Massif, Northern Kazakhstan.
The Canadian Mineralogist, Vol. 49, 3, pp. 673-690.
Kahoui, M., Kaminsky, F.V., Griffin, W.L., Belousova, E., Mahdjoub, Y., Chabane, M.
Detrital pyrope garnets from the El Kseibat area, Algeria: a glimpse into lithospheric mantle beneath the north eastern edge of the west African Craton.
Journal of African Earth Sciences, Vol. 63, Feb. pp. 1-11.
Kaminsky, F.V., Kahoui, M.,Mahdjoub, Y., Belousova, E., Griffin, W.L.,O'Reilly, S.Y.
Pyrope garnets from the Eglab Shield, Algeria: look inside the Earth's mantle in the West African Craton and suggestions about primary sources of diamond and indicator minerals.
Vladykin, N.V. ed. Deep seated magmatism, its sources and plumes, Russian Academy of Sciences, pp. 73-103.
Physicochemical parameters of the material of mantle plumes: evidence from the thermodynamic analysis of mineral inclusions in sublithospheric diamond.
Geochemistry International, Vol. 52, 11, pp. 903-911.
Mineralogy and Petrology, in press available, 12p.
South America, Brazil
Deposit - Juina
Abstract: In addition to ultramafic and mafic associations, a primary natrocarbonatitic association occurs in the lower mantle. To date, it was identified as inclusions in diamonds from the Juina area, Mato Grosso State, Brazil. It comprises almost 50 mineral species: carbonates, halides, fluorides, phosphates, sulfates, oxides, silicates, sulfides and native elements. In addition, volatiles are present in this association. Among oxides, coexisting periclase and wüstite were identified, pointing to the formation of the natrocarbonatitic association at a depth greater than 2000 km. Some iron-rich (Mg,Fe)O inclusions in diamond are attributed to the lowermost mantle. The initial lower-mantle carbonatitic melt formed as a result of low-fraction partial melting of carbon-containing lower-mantle material, rich in P, F, Cl and other volatile elements, at the core-mantle boundary. During ascent to the surface, the initial carbonatitic melt dissociated into two immiscible parts, a carbonate-silicate and a chloride-carbonate melt. The latter melt is parental to the natrocarbonatitic lower-mantle association. Diamonds with carbonatitic inclusions were formed in carbonatitic melts or high-density fluids.
Abstract: One of the most controversial diamond types is carbonado, as its origin and geological history are still under debate. Here, we investigate selected carbonado samples using neutron diffraction and high resolution orientation mapping in combination with numerical simulations. Neutron diffraction analyses show that fine grained carbonado samples exhibit a distinct lack of crystallographic preferred orientation. Quantitative crystallographic orientation analyses performed on transmission electron microscope (TEM) sections reveal that the 2-10 ?m grains exhibit locally significant internal deformation. Such features are consistent with crystal plastic deformation of a grain aggregate that initially formed by rapid nucleation, characterized by a high number of nucleation sites and no crystallographic preferred orientation. Crystal plastic deformation resulted in high stress heterogeneities close to grain boundaries, even at low bulk strains, inducing a high degree of lattice distortion without significant grain size reduction and the development of a crystallographic preferred orientation. Observed differences in the character of the grain boundary network and internal deformation structures can be explained by significant post-deformation annealing occurring to variable degrees in the carbonado samples. Differences in intensity of crystal bending and subgrain boundary sharpness can be explained by dislocation annihilation and rearrangement, respectively. During annealing grain energy is reduced resulting in distinct changes to the grain boundary geometry. Grain scale numerical modelling shows that anisotropic grain growth, where grain boundary energy is determined by the orientation of a boundary segment relative to the crystallographic orientation of adjacent grains results in straight boundary segments with abrupt changes in orientation even if the boundary is occurring between two triple junctions forming a "zigzag" pattern. In addition, in diamond anisotropic grain growth results in triple junctions that rarely show 120° angles. Our results support the interpretation that carbonados may have undergone at least 2 or 3 stages of development with rapid nucleation, crystal plastic deformation to low strains and variable degrees of post-deformation annealing. Such a history is commonly observed in Earth's crustal or mantle rocks. Hence, for carbonados it is not necessary to invoke an extraordinary and/or extraterrestrial origin and history. The combination of methods utilized here, promises to help advance our understanding of diamond and diamond aggregates in the future.
Abstract: Abstract
In addition to a series of finds of diamond in mafic volcanic and ultramafic massive rocks in Kamchatka, Russia, a carbonado-like diamond aggregate was identified in recent lavas of the active Avacha volcano. This aggregate differs from ‘classic carbonado’ by its location within an active volcanic arc, well-formed diamond crystallites, and cementing by Si-containing aggregates rather than sintering. The carbonado-like aggregate contains inclusions of Mn-Ni-Si-Fe alloys, native ?-Mn, tungsten and boron carbides, which are uncommon for both carbonado and monocrystalline diamonds. Mn-Ni-Si-Fe alloys, trigonal W2C and trigonal B4C are new mineral species that were not previously found in the natural environment. The formation of the carbonado-like diamond aggregate started with formation at ~ 850-1000 °C of tungsten and boron carbides, Mn-Ni-Si-Fe alloys and native ?-Mn, which were used as seeds for the subsequent crystallization of micro-sized diamond aggregate. In the final stage, the diamond aggregate was cemented by amorphous silica, tridymite, ?-SiC, and native silicon. The carbonado-like aggregate was most likely formed at near-atmospheric pressure conditions via the CVD mechanism during the course or shortly after one of the volcanic eruption pulses of the Avacha volcano. Volcanic gases played a great role in the formation of the carbonado-like aggregate.
Abstract: One of the most controversial diamond types is carbonado, as its origin and geological history are still under debate. Here, we investigate selected carbonado samples using neutron diffraction and high resolution orientation mapping in combination with numerical simulations. Neutron diffraction analyses show that fine grained carbonado samples exhibit a distinct lack of crystallographic preferred orientation. Quantitative crystallographic orientation analyses performed on transmission electron microscope (TEM) sections reveal that the 2-10 ?m grains exhibit locally significant internal deformation. Such features are consistent with crystal plastic deformation of a grain aggregate that initially formed by rapid nucleation, characterized by a high number of nucleation sites and no crystallographic preferred orientation. Crystal plastic deformation resulted in high stress heterogeneities close to grain boundaries, even at low bulk strains, inducing a high degree of lattice distortion without significant grain size reduction and the development of a crystallographic preferred orientation. Observed differences in the character of the grain boundary network and internal deformation structures can be explained by significant post-deformation annealing occurring to variable degrees in the carbonado samples. Differences in intensity of crystal bending and subgrain boundary sharpness can be explained by dislocation annihilation and rearrangement, respectively. During annealing grain energy is reduced resulting in distinct changes to the grain boundary geometry. Grain scale numerical modelling shows that anisotropic grain growth, where grain boundary energy is determined by the orientation of a boundary segment relative to the crystallographic orientation of adjacent grains results in straight boundary segments with abrupt changes in orientation even if the boundary is occurring between two triple junctions forming a “zigzag” pattern. In addition, in diamond anisotropic grain growth results in triple junctions that rarely show 120° angles. Our results support the interpretation that carbonados may have undergone at least 2 or 3 stages of development with rapid nucleation, crystal plastic deformation to low strains and variable degrees of post-deformation annealing. Such a history is commonly observed in Earth's crustal or mantle rocks. Hence, for carbonados it is not necessary to invoke an extraordinary and/or extraterrestrial origin and history. The combination of methods utilized here, promises to help advance our understanding of diamond and diamond aggregates in the future.
Abstract: Presents the first comprehensive overview of the composition and structure of the Earth’s lower mantleSummarizes geological, mineralogical, experimental and geophysical data on the Deep Earth. Broadens readers’ understanding and presents a compositional model of the lowermost mantle and geodynamic processes at the core/mantle boundary.
Proceedings of XXXIV held Aug. 4-9. Perchuk International School of Earth Sciences, At Miass, Russia, 2p. Abstract
Mantle
nitrogen
Abstract: The first finds of iron nitrides and carbonitride as inclusions in lower-mantle diamond from Rio Soriso, Brazil, are herein reported. These grains were identified and studied with the use of transmission electron microscopy (TEM), electron diffraction analysis (EDX), and electron energy loss spectra (EELS). Among nitrides, trigonal Fe3N and orthorhombic Fe2N are present. Carbonitride is trigonal Fe9(N0.8C0.2)4. These mineral phases associate with iron carbide, Fe7C3, silicon carbide, SiC, Cr-Mn-Fe and Mn-Fe oxides; the latter may be termed Mn-rich xieite. Our identified finds demonstrate a wide field of natural compositions from pure carbide to pure nitride, with multiple stoichiometries from M5(C,N)3 to M23(C,N)6 and with M/(C,N) from 1.65 to 3.98. We conclude that the studied iron nitrides and carbonitrides were formed in the lowermost mantle as the result of the infiltration of liquid metal, containing light elements from the outer core into the D? layer, with the formation of the association: native Fe? + iron nitrides, carbides, and transitional compounds + silicon carbide. They indicated that major reservoirs of nitrogen should be expected in the core and in the lowermost mantle, providing some solution to the problem of nitrogen balance in the Earth.
Abstract: In addition to a series of finds of diamond in mafic volcanic and ultramafic massive rocks in Kamchatka, Russia, a carbonado-like diamond aggregate was identified in recent lavas of the active Avacha volcano. This aggregate differs from 'classic carbonado' by its location within an active volcanic arc, well-formed diamond crystallites, and cementing by Si-containing aggregates rather than sintering. The carbonado-like aggregate contains inclusions of Mn-Ni-Si-Fe alloys, native ?-Mn, tungsten and boron carbides, which are uncommon for both carbonado and monocrystalline diamonds. Mn-Ni-Si-Fe alloys, trigonal W2C and trigonal B4C are new mineral species that were not previously found in the natural environment. The formation of the carbonado-like diamond aggregate started with formation at 850-1000 °C of tungsten and boron carbides, Mn-Ni-Si-Fe alloys and native ?-Mn, which were used as seeds for the subsequent crystallization of micro-sized diamond aggregate. In the final stage, the diamond aggregate was cemented by amorphous silica, tridymite, ?-SiC, and native silicon. The carbonado-like aggregate was most likely formed at near-atmospheric pressure conditions via the CVD mechanism during the course or shortly after one of the volcanic eruption pulses of the Avacha volcano. Volcanic gases played a great role in the formation of the carbonado-like aggregate.
Abstract: Great advances were achieved during the last several decades in our knowledge of the mineralogy, petrology and geochemistry of the Earth’s lower mantle [1]. Most geological observations agree and confirm earlier suggestions and conclusions made; however, some disagreements or discrepancies appeared between the various geological and experimental data. One of the first, unexpected occurrences was the presence of free silica in the ‘ultramafic’ lowermantle association (“stishovite paradox” [2]). Another unexpected discrepancy is wide variation in the composition of natural periclase-wüstite phase: mg = Mg/(Mg + Fe)at varies from 0.90 to 0.16, while, according to experimental and theoretical data it should, in the pyrolytic system, be with mg at c. 0.90. Iron contents in both ferropericlase and bridgmanite increase with depth, indicating the increasing Fe content in the lower part of the lower mantle. In addition to major lower-mantle minerals (bridgmanite, ferropericlase, CaSi-perovskite and stishovite), some other minerals were identified in association with these, such as Mg-Cr-Fe, Ca- Cr and other orthorhombic oxides, iron carbides and nitrides, and others. In contrast to earlier suggestions on the increase of the oxygen fugacity values in the mantle with depth, the ??logfO2 values for the lower mantle, calculated from the compositions of natural ferropericlase inclusions in diamond, are similar to those of the upper mantle: they lie, in general, between the IW and FMQ buffers. In addition to ‘ultramafic’ and mafic mineral associations, a primary natrocarbonatitic association occurs in the lower mantle. Such and other features observed in lower-mantle samples indicate that the bulk composition of the lower mantle may differ from that of a ‘pyrolite model’, as well as heterogeneity in the lower mantle being as the result of extensive geodynamic processes occurring in the Deep Earth.
Abstract: Approximately 700 diamond crystals were identified in volcanic (mainly pyroclastic) rocks of the Tolbachik volcano, Kamchatka, Russia. They were studied with the use of SIMS, scanning and transmission electron microscopy, and utilization of electron energy loss spectroscopy and electron diffraction. Diamonds have cube-octahedral shape and extremely homogeneous internal structure. Two groups of impurity elements are distinguished by their distribution within the diamond. First group, N and H, the most common structural impurities in diamond, are distributed homogeneously. All other elements observed (Cl, F, O, S, Si, Al, Ca, and K) form local concentrations, implying the existence of inclusions, causing high concentrations of these elements. Most elements have concentrations 3-4 orders of magnitude less than chondritic values. Besides N and H, Si, F, Cl, and Na are relatively enriched because they are concentrated in micro- and nanoinclusions in diamond. Mineral inclusions in the studied diamonds are 70-450 nm in size, round- or oval-shaped. They are represented by two mineral groups: Mn-Ni alloys and silicides, with a wide range of concentrations for each group. Alloys vary in stoichiometry from MnNi to Mn2Ni, with a minor admixture of Si from 0 to 5.20-5.60 at%. Silicides, usually coexisting with alloys, vary in composition from (Mn,Ni)4Si to (Mn,Ni)5Si2 and Mn5Si2, and further to MnSi, forming pure Mn-silicides. Mineral inclusions have nanometer-sized bubbles that contain a fluid or a gas phase (F and O). Carbon isotopic compositions in diamonds vary from -21 to -29‰ ?13CVPDB (avg. = -25.4). Nitrogen isotopic compositions in diamond from Tolbachik volcano are from -2.32 to -2.58‰ ?15NAir. Geological, geochemical, and mineralogical data confirm the natural origin of studied Tolbachik diamonds from volcanic gases during the explosive stage of the eruption.
Abstract: The last decade has seen the publication of a number of new and highly pertinent studies on the composition of the Earth's lower mantle, leading to a better understanding of the Deep Earth. A series of new lower-mantle minerals were found, having formed under natural conditions and received the following names: bridgmanite, jeffbenite, breyite, and ellinaite. Some other, as yet, unnamed oxides, phosphates, and fluorides were also discovered for the first time. Among the new mineral phases, of particular interest are cubic nitrogen and ice-VII. Their presence demonstrates a significant role of both nitrogen and of water in the Deep Earth. This new data allows for creation of a principal model for the composition of the Earth's lower mantle. By various evidences, it differs greatly to that of the upper mantle composition, and is heterogeneous.
Doklady Earth Sciences, Vol. 494, 1, pp. 699-703. pdf
South America, Brazil
hydrogen
Abstract: The volumetric concentration of hydrogen in two Brazilian diamonds is determined using secondary ion mass spectrometry and implantation of hydrogen into an external standard sample (with a dose of 1 × 16 at/cm2 and energy of 120 KeV). The diamonds studied differ noticeably in their intensities of IR-active hydrogen from 0 to 1.5 cm-1 according to the analyses of their IR spectra. The results demonstrate that for both samples studied, the volumetric concentration of hydrogen does not exceed the reached detectable level of (1-2) × 1018 at/cm3 or 1.7-3.3 at. ppm; i.e., it is lower by an order of magnitude than in the early chemical analysis and by 2-3 orders of magnitude lower than the results of the ion-beam spectrochemical, nuclear-physical, and ERDA analyses. Only a part of the hydrogen forms optically active impurities in diamond crystals and can be determined by spectral methods.
Lithos, https://doi.org/ 10.1016/j.lithos. 2021.106335, 4p. Pdf
Mantle
geodynamics
Abstract: The issue is devoted to new data on composition, structure and dynamics of the Earth’s lower mantle. The Earth’s lower mantle is the largest portion of our planet, comprising more than 50 % of its volume, but major questions remain as to chemical composition, thermal regime and global heterogeneity, as well as to its role in controlling mantle dynamic processes. The composition of the lower mantle is now understood to be more complex than had been suggested in theoretic and experimental works based solely on ‘pyrolitic’ compositions. Little is known about lower-mantle mineralogy and phase chemistry, especially at greater depth. Recent studies of inclusions in so-called superdeep diamonds have revealed a range of mineral associations having their specific geochemical features. Aside from a few inclusions found in diamonds, the mineralogy of the lower mantle is, for the most part, inferred from the results of theoretic and experimental data resembling natural environments. This volume presents new results on all aspects of composition of lower mantle including high pressure measurements, petrology and geochemistry, as well as numerical modelling of both the propagation of seismic waves and the geochemical composition and physical state of the deepest mantle rocks.
Abstract: Ellinaite, a natural analog of the post-spinel phase ?-CaCr2O4, was discovered at the Hatrurim Basin, Hatrurim pyrometamorphic formation (the Mottled Zone), Israel, and in an inclusion within the super-deep diamond collected at the placer of the Sorriso River, Juína kimberlite field, Brazil. Ellinaite at the Hatrurim Basin is confined to a reduced rankinite-gehlenite paralava, where it occurs as subhedral grains up to 30?µm in association with gehlenite, rankinite and pyrrhotite or forms the rims overgrowing zoned chromite-magnesiochromite. The empirical formula of the Hatrurim sample is (Ca0.960FeNa0.012Mg0.003)0.992(Cr1.731VTiAl0.023TiO4. The mineral crystallizes in the orthorhombic system, space group Pnma, unit-cell parameters refined from X-ray single-crystal data: a 8.868(9), b 2.885(3), c 10.355(11)?Å, V 264.9(5)?Å3 and Z=4. The crystal structure of ellinaite from the Hatrurim Basin has been solved and refined to R1=0.0588 based on 388 independent observed reflections. Ellinaite in the Juína diamond occurs within the micron-sized polyphase inclusion in association with ferropericlase, magnesioferrite, orthorhombic MgCr2O4, unidentified iron carbide and graphite. Its empirical formula is Ca1.07(Cr1.71FeV0.06Ti0.03Al0.03Mg0.02Mn0.02)?1.93O4. The unit-cell parameters obtained from HRTEM data are as follows: space group Pnma, a 9.017, b 2.874?Å, c 10.170?Å, V 263.55?Å3, Z=4. Ellinaite belongs to a group of natural tunnel-structured oxides of the general formula AB2O4, the so-called post-spinel minerals: marokite CaMn2O4, xieite FeCr2O4, harmunite CaFe2O4, wernerkrauseite CaFeMn4+O6, chenmingite FeCr2O4, maohokite MgFe2O4 and tschaunerite Fe(FeTi)O4. The mineral from both occurrences seems to be crystallized under highly reduced conditions at high temperatures (>1000??C), but under different pressure: near-surface (Hatrurim Basin) and lower mantle (Juína diamond).
Geochemistry International, Vol. 59, 11, pp.993-1007. pdf
Global
diamond genesis
Abstract: The best-known, most well-studied diamondiferous rocks are kimberlites and lamproites. Diamonds are also found in impactites, metamorphic rocks, ophiolites, and modern volcanic rocks. Diamonds from these rocks differ from kimberlitic diamonds in size, morphology, trace-element and isotope composition, and physical properties. Differences in these characteristics are related to their different mechanisms of origin. In some cases, diamonds can be formed in “metastable” conditions under disequilibrium thermodynamic parameters, supporting the conclusion that diamond is a polygenetic mineral, formed in nature under different physicochemical and geodynamic conditions. According to thermodynamic considerations and calculations, “metastable” crystallization of diamond is mainly controlled by the size of the forming crystallites. The main effectors in decreasing the energetic barrier for nanosized diamonds are surface tension and related surface energy.
Abstract: Alluvial diamonds from the Juina area in Mato Grosso, Brazil, have been characterized in terms of their morphology, syngenetic mineral inclusions, carbon isotopes and nitrogen contents. Morphologically, they are similar to other Brazilian diamonds, showing a strong predominance of rounded dodecahedral crystals. However, other characteristics of the Juina diamonds make them unique. The inclusion parageneses of Juina diamonds are dominated by ultra-high-pressure ("superdeep") phases that differ both from "traditional" syngenetic minerals associated with diamonds and, in detail, from most other superdeep assemblages. Ferropericlase is the dominant inclusion in the Juina diamonds. It coexists with ilmenite, Cr-Ti spinel, a phase with the major-element composition of olivine, and SiO2. CaSi-perovskite inclusions coexist with titanite (sphene), "olivine" and native Ni. MgSi-perovskite coexists with TAPP (tetragonal almandine-pyrope phase). Majoritic garnet occurs in one diamond, associated with CaTi-perovskite, Mn-ilmenite and an unidentified Si-Mg phase. Neither Cr-pyrope nor Mg-chromite was found as inclusions. The spinel inclusions are low in Cr and Mg, and high in Ti (Cr2O3<36.5 wt%, and TiO2>10 wt%). Most ilmenite inclusions have low MgO contents, and some have very high (up to 11.5 wt%) MnO contents. The rare "olivine" inclusions coexisting with ferropericlase have low Mg# (87-89), and higher Ca, Cr and Zn contents than typical diamond-inclusion olivines. They are interpreted as inverted from spinel-structured (Mg, Fe)2Si2O4. This suite of inclusions is consistent with derivation of most of the diamonds from depths near 670 km, and adds ilmenite and relatively low-Cr, high-Ti spinel to the known phases of the superdeep paragenesis. Diamonds from the Juina area are characterized by a narrow range of carbon isotopic composition (ཉC=-7.8 to -2.5?), except for the one majorite-bearing diamond (ཉC=-11.4?). There are high proportions of nitrogen-free and low-nitrogen diamonds, and the aggregated B center is predominant in nitrogen-containing diamonds. These observations have practical consequences for diamond exploration: Low-Mg olivine, low-Mg and high-Mn ilmenite, and low-Cr spinel should be included in the list of diamond indicator minerals, and the role of high-Cr, low-Ti spinel as the only spinel associated with diamond, and hence as a criterion of diamond grade in kimberlites, should be reconsidered.
Abstract: The mineralogical and geochemical features of titanite and associated minerals in a rare sample of kyanite-coesite-rutile-bearing eclogite from the Udachnaya-East (Vostochnaya) kimberlite pipe have been studied in detail. Subidiomorphic titanite grains (100-300 ?m) were identified in the intergranular space. The composition of individual grains of titanite is characterized by a constant presence of Al2O3, F, P2O5, Zr, and Sr impurities but varies within the xenolith. Based on the absence of titanite inclusions in the rock-forming minerals and their presence in the intergranular space, titanite was formed in the studied sample at a late stage of its formation, most likely in the process of metasomatic action of the fluid/melt. Crystallization of rock-forming minerals (garnet + omphacite + kyanite) and accessory rutile occurred jointly at 3.5 ± 0.32 GPa and 920 ± 65°?. The value of Eu/Eu* = 1.06 in the reconstructed bulk composition of the rock, the high modal content of kyanite (~17 vol %), and the value of Ca# = Ca/(Ca + Mg + Fe + Mn) > 0.5 in garnet indicate a subduction nature of the studied eclogite. Most likely, the formation of titanite in the studied sample occurred as a result of the metasomatic action of a fluid/melt enriched in calcium, strontium, large lithophilic elements, and lead, by a mechanism similar to the formation of eclogites in the units of the Western Tien Shan.
Dyke Swarms of the World: a modern perspective, Srivastava et al. eds. Springer , pp. 263-314.
Africa, West Africa, South America
geochronology
Abstract: Eight different generations of dolerite dykes crosscutting the Paleoproterozoic basement in West Africa and one in South America were dated using the high precision U-Pb TIMS method on baddeleyite. Some of the individual dykes reach over 300 km in length and they are considered parts of much larger systems of mafic dyke swarms representing the plumbing systems for large igneous provinces (LIPs). The new U-Pb ages obtained for the investigated swarms in the southern West African Craton (WAC) are the following (oldest to youngest): 1791?±?3 Ma for the N010° Libiri swarm, 1764?±?4 Ma for the N035° Kédougou swarm, 1575?±?5 for the N100° Korsimoro swarm, ~1525-1529 Ma for the N130° Essakane swarm, 1521?±?3 Ma for the N90° Sambarabougou swarm, 915?±?7 Ma for the N070° Oda swarm, 867?±?16 Ma for the N355° Manso swarm, 202?±?5 Ma and 198?±?16 Ma for the N040° Hounde swarm, and 200?±?3 Ma for the sills in the Taoudeni basin. The last ones are related to the Central Atlantic Magmatic Province (CAMP) event. The Hounde swarm is oblique to the dominant radiating CAMP swarm and may be linked with the similar-trending elongate Kakoulima intrusion in Guinea. In addition, the N150° Käyser swarm (Amazonian craton, South America) is dated at 1528?±?2 Ma, providing a robust match with the Essakane swarm in a standard Amazonia-West African craton reconstruction, and resulting in a combined linear swarm >1500 km by >1500 km in extent. The Precambrian LIP barcode ages of c. 1790, 1765-1750, 1575, 1520, 915. 870 Ma for the WAC are compared with the global LIP record to identify possible matches on other crustal blocks, with reconstruction implications. These results contribute to the refinement of the magmatic ‘barcode’ for the West African and Amazonian cratons, representing the first steps towards plausible global paleogeographic reconstructions involving the West African and Amazonian cratons.
Contribution to Mineralogy and Petrology, Vol. 177, 19 , 18p. Pdf
Global
garnet
Abstract: Garnet is a common U-bearing mineral in various magmatic and metamorphic rocks with a high U-Pb closure temperature (>?850 °C), rendering it a potentially valuable U-Pb geochronometer. However, a high U (>?10 ppm) garnet reference material that suits both quadrupole and/or multi-collector inductively coupled plasma mass spectrometry (ICP-MS) is yet to be established. This study evaluates a potential reference material for in situ garnet U-Pb analysis with anomalously high U content from the Prairie Lake alkaline complex, Canada. The PL57 garnet, occurring in a calcite ijolite, has high TiO2 (6.5-15.0 wt%, average 12.7 wt%) and Fe2O3 (17.1-21.3 wt%) contents and is a member of the andradite (26-66 mol.%)-morimotoite (18-41 mol.%)-schorlomite (16-35 mol.%) solid solution series. Four samples were dated by U-Pb ID-TIMS to assess reproducibility. Twelve TIMS analyses produced concordant, equivalent results. Garnet PL57 yielded a concordant age of 1156.2?±?1.2 Ma (2?, n?=?10, MSWD?=?1.0), based on ten analyses with two results discarded due to possible mineral inclusions (if included, the concordia age is 1156.6?±?1.8 Ma; n?=?12, MSWD?=?2.0). PL57 had 27-76 ppm (average 41 ppm) U with Th/U of 0.51-0.68 (average 0.63). The total common Pb content ranged from 0.4 to 3.9 pg (average 1.1 pg). Laser ablation coupled with ICP-MS and high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging provide direct evidence that U is incorporated and homogeneously distributed within the garnet lattice rather than as defects or pore spaces. Published garnet samples and standards were then tested by calibrating the Willsboro, Mali, Qicun, and Tonglvshan garnet against PL57, which gave accurate ages within the recommended values. Case studies of garnet from the Archean Musselwhite orogenic gold deposit in Canada and the Cenozoic Changanchong and Habo skarn deposits in China yield reliable ages. This suggests that PL57 is a robust U-Pb isotope reference material. The limited variations of U and Pb isotopic ratios, together with the high U concentration and extremely low initial common Pb, make PL57 an ideal calibration and monitor reference material for in situ measurements.
Abstract: Magmatism of the Povungnituk Group of the Cape Smith Belt, northern Superior craton, was formed in three stages: (i)early alkaline magmatism and associated carbonatites (undated), (ii) a main flood basalt sequence (Beauparlant Formation) (constrained between 2040 and 1991?Ma), and (iii) a late stage alkaline pulse (Cecilia Formation) (ca. 1959?Ma). We suggest that the main stage of magmatic activity (middle pulse) was of short duration. A new UPb baddeleyite age of 1998?±?6?Ma is obtained from a dolerite sill intruding the uppermost section of the Beauparlant Formation. This age has regional significance because it matches the previously obtained 1998?±?2?Ma age for the Watts Group (Purtuniq) ophiolite of the northern Cape Smith Belt and the 1998?±?2?Ma?U-Pb age of the Minto dykes intruding the craton to the south. These coeval units, along with additional units correlated on paleomagnetic grounds (Eskimo Formation), are interpreted to define a large igneous province (LIP), extending over an area of >400,000?km2, which we herein define as the Minto-Povungnituk LIP. Geochemical comparison between the Watts Group ophiolite, Minto dykes and the mafic Povungnituk Group shows significant differences allowing these data to be divided into two groups and domains within the LIP. A northern domain, comprising the Povungnituk and Watts groups, shows mixing between a depleted mantle source and a more enriched mantle plume-sourced melt. A southern domain comprising the Minto dykes and the paleomagnetically linked Eskimo Formation shows signs of an even more enriched source, while these magmas also show the effect of crustal contamination. Two distinct source mechanisms can be responsible for the observed geochemical differences between the two domains. First, a difference in lithospheric sources, where melting of different portions of Superior craton lithosphere caused the different melt signatures in the interior of the craton. In this case magmatism in the two domains is only related by having the same heat source (e.g.,a mantle plume) interpreted to be located on the northwestern side of the northern Superior craton. Second, two distinct deep mantle sources that remained separated within the ascending plume. This is analogous to some current hotspots interpreted to sample both large low shear velocity provinces (LLSVP) and adjacent ambient deep mantle. This latter interpretation would allow for the use of bilateral chemistry in LIPs as a potential tool for the recognition and mapping of the LLSVP boundaries throughout Earth's history.
Abstract: Rifting, breakup, and subsequent collision related to the ca. 1.92-1.79?Ga Svecofennian orogeny fragmented and deformed the western margin of the Archean Karelia-Kola craton into four crustal blocks: Pudasjärvi, Iisalmi, Kuhmo, and Taivalkoski. Detailed quantification of Svecofennian deformation is limited due to poorly exposed basement geology and an as yet incomplete dyke swarm record. New U-Pb ID-TIMS geochronological results on baddeleyite and zircon are presented for three key mafic dykes from the Pudasjärvi block, namely the Uolevinlehto, Myllykangas, and Sipojuntti dykes. The age of the 325°-trending Uolevinlehto dyke is estimated at ca. 2400?±?12?Ma from discordant multigrain baddeleyite fractions, showing it to be younger than ca. 2450?Ma dykes across Karelia. The 350°-trending Myllykangas dyke has a minimum age of 2135.2?+?3.6/?3.7?Ma based on chemically abraded zircon. Results from single baddeleyite grains provide a precise upper intercept age of 2128.9?±?1.2?Ma for the 320°-trending Sipojuntti dyke. Our new U-Pb ages are integrated with those from the literature to define six major dyke swarms in the Pudasjärvi block: the WNW-trending ca. 2.45?Ga Pääjärvi, NW-trending ca. 2.40?Ga Uolevinlehto, NW-trending ca. 2.13-2.10?Ga Tohmajärvi, WNW-trending ca. 2.07?Ga Palomaa, NNW-trending ca. 1.98?Ga Paukkajanvaara and undated"East-West" dykes. Trends of contemporaneous dyke swarms in the Taivalkoski and Kuhmo blocks, however, are systematically offset by 35°. With subvertical dips, offset dyke swarms record 35° clockwise vertical-axis rotation of the Pudasjärvi block relative to the interior of Karelia, consistent with dextral transpression during the Svecofennian orogeny. Structural restoration of the Pudasjärvi blocks improves the constraints on regional dyke swarm patterns, and these are used to revise the position of the Karelia-Kola craton within the context of the paleogeographic reconstruction of supercraton Superia.
Decennie de ; 'etude du Rift Africain et de Son Soubassement precambrien Par le Laboratoire de Petrologie- Universite Delumbumbashi (zaire) Bilan et Perspective.
International Geological Correlation Programme (IGCP)project outline Evolution of the Kibaran belt system in southwest Africa and comparison with equatorial..
Major and trace element and Sr Nd, Hf, and Pb isotope compositions of the Karoo large igneous province, Botswana and Zimbabwe: lithosphere vs mantle plume...
Neoproterozoic inheritance during Cainozoic rifting in the western and southwestern branches of the East African Rift system: evidence from carbonatite alkaline
Tanzanian Journal of Earth Science, Vol. 1, Dec. pp. 29-37.
Abstract: The Storkwitz-Carbonatite is a Late Cretaceous intru-sive complex, which is well-explored by a relatively large number of exploration bore holes both from the 1970ies, 1980ies and from one more recent bore hole, SES-1/2012. The carbonatite complex hosts a (cur-rently) marginally economic mineralisation of rare earth elements (REE) and niobium, which is technical-ly still difficult to recover. The upper part of the car-bonatitic body is located some 100-120 m below the Pre-Cenozoic land surface, which in turn is overlain by approximately 100 m of glacial, fluvio-glacial, and fluviatile sediments. The aim of this study was to characterize the minerali-sation in the upper part of the intrusion geochemically and mineralogically and to try to identify indications of a supergene overprint on the late magmatic to hydro-thermal mineralisation. Fresh drill core samples from the exploration bore hole SES-1/2012 have revealed that the mineralisation is associated with a carbonatit-ic igneous breccia body and also with several alvikite veins. The breccia body is very heterogeneous, dis-plays a variety of matrix colours and also a range of matrix-to-clast ratios. Non-destructive analytical methods like p-XRF anal-yses, magnetic susceptibility measurements, and SWIR-reflectance spectroscopy were carried out di-rectly on the drill core. The samples were also investi-gated by optical microscopy, scanning electron mi-croscopy (SEM) and their geochemical composition was analysed by whole rock analyses at a certified laboratory. The geochemical results confirm the presence of a REE-enriched zone, which is closely associated with the carbonatitic intrusion, whereas the porphyritic clasts of the breccia and the porphyritic wall rocks do not contain any REE mineralisation. The mineral composition of the examined sections is very hetero-geneous and comprises magmatic phenocrysts as well as a large variety of secondary mineral phases, which were formed by either hypogene, ascending late magmatic carbothermal or subsequent hydro-thermal processes or alternatively by deeply descend-ing meteoric supergene processes. The secondary processes were strongly oxidising and formed abun-dant hydrated mineral phases. The REE ore minerals are predominantly secondary monazites and REE-fluorocarbonates, which both occur in igneous breccias as well as in alvikite veins. Other minerals such as apatite or pyrochlore are slightly enriched in REE. However, there is no significant correlation be-tween the proportion of REE-bearing minerals ob-served microscopically and the geochemical REE concentration. Several mineral phases display intensive alteration textures and parageneses and especially the crypto-crystalline matrix of the breccias indicate a supergene influence. The supergene overprint has thus caused the alteration and formation of supergene Fe-oxyhydroxides and of an alumo-siliceous matrix and the local redistribution of the REE within the REE-mineral phases. However, no signs were detected that indicate a dissolution, transport, and especially frac-tionation of the dissolved REE in the (deep) super-gene environment.
Abstract: Although the source rocks of alluvial sapphires in Montana have never been discovered, inclusions and geochemistry of material from this location may give clues to their original source. Mineral inclusions in alluvial Montana sapphires, mainly from Rock Creek, were identified and compared with existing data. Topaz was a remarkable find in one of these samples; other newly identified mineral inclusions in Montana sapphire were allanite, anatase, chalcopyrite, and monazite. Together with the presence of calcium-rich plagioclase, alkali-feldspar, apatite, barite, phlogopite, a pyrochlore-group mineral previously called uranpyrochlore, and chromite/spinel, these inclusions may reflect a metasomatic origin for the sapphires. This is supported by their chemical composition, which largely coincides with sapphires of plumasitic/metasomatic origin. The secondary Montana sapphires analyzed in this study are characterized by mean values of Fe (4686 ppmw), Ti (58 ppmw), Ga (51 ppmw), Mg (35 ppmw), and Cr (21 ppmw). Fe-Mg-Ga ratios help to distinguish them from sapphires with overlapping properties, such as those from Umba, Tanzania, and Rio Mayo, Colombia.
Africa, South Africa, Europe, Greenland, China, Russia, Siberia, Canada, South America, Brazil
subduction, metasomatism
Abstract: To investigate halogen heterogeneity in the subcontinental lithospheric mantle (SCLM), we measured the concentrations of Cl, Br, and I in kimberlites and their mantle xenoliths from South Africa, Greenland, China, Siberia, Canada, and Brazil. The samples can be classified into two groups based on halogen ratios: a high-I/Br group (South Africa, Greenland, Brazil, and Canada) and a low-I/Br group (China and Siberia). The halogen compositions were examined with the indices of crustal contamination using Sr and Nd isotopes and incompatible trace elements. The results indicate that the difference between the two groups was not due to different degrees of crustal contamination but from the contributions of different mantle sources. The low-I/Br group has a similar halogen composition to seawater-influenced materials such as fluids in altered oceanic basalts and eclogites and fluids associated with halite precipitation from seawater. We conclude that the halogens of the high-I/Br group are most likely derived from a SCLM source metasomatized by a fluid derived from subducted serpentinite, whereas those of the low-I/Br group are derived from a SCLM source metasomatized by a fluid derived from seawater-altered oceanic crust. The SCLM beneath Siberia and China could be an important reservoir of subducted, seawater-derived halogens, while such role of SCLM beneath South Africa, Greenland, Canada, and Brazil seems limited.
Abstract: Fedorite is a rare phyllosilicate, having a crystal structure characterized by SiO4-tetrahedral double layers located between continuous layers formed by edge-sharing (Ca,Na)-octahedra, and containing interlayer K, Na atoms and H2O molecules. A mineralogical-petrographic and detailed crystal-chemical study of fedorite specimens from three districts of the Murun alkaline complex was performed. The sequence of the crystallization of minerals in association with fedorite was established. The studied fedorite samples differ in the content of interlayer potassium and water molecules. A comparative analysis based on polyhedral characteristics and deformation parameters was carried out. For the first time, EPR, optical absorption and emission spectra were obtained for fedorite. The raspberry-red coloration of the mineral specimens could be attributed to the presence of Mn4+ ions.
Minerals, Vol. 10, 702 10.3390/min10080702 24p. Pdf
Russia, Yakutia
deposit - Murun
Abstract: Fedorite is a rare phyllosilicate, having a crystal structure characterized by SiO4-tetrahedral double layers located between continuous layers formed by edge-sharing (Ca,Na)-octahedra, and containing interlayer K, Na atoms and H2O molecules. A mineralogical-petrographic and detailed crystal-chemical study of fedorite specimens from three districts of the Murun alkaline complex was performed. The sequence of the crystallization of minerals in association with fedorite was established. The studied fedorite samples differ in the content of interlayer potassium and water molecules. A comparative analysis based on polyhedral characteristics and deformation parameters was carried out. For the first time, EPR, optical absorption and emission spectra were obtained for fedorite. The raspberry-red coloration of the mineral specimens could be attributed to the presence of Mn4+ ions.
Earth and Planetary Science Letters, Vol. 474, pp. 128-137.
Mantle
peridotites
Abstract: To better constrain the Ca isotopic composition of the Bulk Silicate Earth (BSE) and explore the Ca isotope fractionation in the mantle, we determined the Ca isotopic composition of 28 peridotite xenoliths from Mongolia, southern Siberia and the Siberian craton. The samples are divided in three chemical groups: (1) fertile, unmetasomatized lherzolites (3.7-4.7 wt.% Al2O3); (2) moderately melt-depleted peridotites (1.3-3.0 wt.% Al2O3) with no or very limited metasomatism (LREE-depleted cpx); (3) strongly metasomatized peridotites (LREE-enriched cpx and bulk rock) further divided in subgroups 3a (harzburgites, 0.1-1.0% Al2O3) and 3b (fertile lherzolites, 3.9-4.3% Al2O3). In Group 1, ?44/40Ca of fertile spinel and garnet peridotites, which experienced little or no melting and metasomatism, show a limited variation from 0.90 to 0.99‰ (relative to SRM 915a) and an average of 0.94 ± 0.05‰ (2SD, ), which defines the Ca isotopic composition of the BSE. In Group 2, the ?44/40Ca is the highest for three rocks with the lowest Al2O3, i.e. the greatest melt extraction degrees (average ‰, i.e. ?0.1‰ heavier than the BSE estimate). Simple modeling of modal melting shows that partial melting of the BSE with ranging from 0.10 to 0.25 can explain the Group 2 data. By contrast, ?44/40Ca in eight out of nine metasomatized Group 3 peridotites are lower than the BSE estimate. The Group 3a harzburgites show the greatest ?44/40Ca variation range (0.25-0.96‰), with ?44/40Ca positively correlated with CaO and negatively correlated with Ce/Eu. Chemical evidence suggests that the residual, melt-depleted, low-Ca protoliths of the Group 3a harzburgites were metasomatized, likely by carbonate-rich melts/fluids. We argue that such fluids may have low (?0.25‰) ?44/40Ca either because they contain recycled crustal components or because Ca isotopes, similar to trace elements and their ratios, may be fractionated by kinetic and/or chromatographic effects of melt percolation in the mantle. The ?44/40Ca in Group 3b lherzolites (0.83-0.89‰) are lower than in the BSE as well, but the effects of metasomatism on ?44/40Ca are smaller, possibly because of the high Ca contents in their protoliths and/or smaller ?44/40Ca differences between the protoliths and metasomatic agents. The BSE estimates based on fertile peridotites in this study fall in the ?44/40Ca ranges for oceanic and continental basalts, various meteorites (achondrites; carbonaceous, ordinary and enstatite chondrites), Mars, and the Moon. These results provide benchmarks for the application of Ca isotopes to planet formation, mantle evolution, and crustal recycling.
Geochimica et Cosmochimica Acta, Vol. 248, pp. 1-13.
Russia, Siberia
carbonatite
Abstract: Ca isotopes can be strongly fractionated at the Earth’s surface and thus may be tracers of subducted carbonates and other Ca-rich surface materials in mantle rocks, magmas and fluids. However, the ?44/40Ca range in the mantle and the scope of intra-mantle isotope fractionation are poorly constrained. We report Ca isotope analyses for 22 mantle xenoliths: four basalt-hosted refractory peridotites from Tariat in Mongolia and 18 samples from the Obnazhennaya (Obn) kimberlite on the NE Siberian craton. Obn peridotites are Paleoproterozoic to Archean melting residues metasomatised by carbonate-rich and/or silicate melts including unique xenoliths that contain texturally equilibrated carbonates. ?44/40Ca in 15 Obn xenoliths shows limited variation (0.74-0.97‰) that overlaps the value (0.94?±?0.05‰) inferred for the bulk silicate Earth from data on fertile lherzolites, but is lower than ?44/40Ca for non-metasomatised refractory peridotites from Mongolia (1.10?±?0.03‰). Bulk ?44/40Ca in four Obn peridotites containing metasomatic carbonates ranges from 0.81?±?0.08‰ to 0.83?±?0.06‰, with similar values in acid-leachates and leaching residues, indicating isotopic equilibration of the carbonates with host rocks. We infer that (a) metasomatism tends to decrease ?44/40Ca values of the mantle, but its effects are usually limited (?0.3‰); (b) Ca isotopes cannot distinguish "carbonatite" and "silicate" types of mantle metasomatism. The lowest ?44/40Ca value (0.56‰) was obtained for a phlogopite-bearing Obn peridotite with a very high Ca/Al of 8 suggesting that the greatest metasomatism-induced Ca isotope shifts may be seen in rocks initially low in Ca that experienced significant Ca input leading to high Ca/Al. Two Obn peridotites, a dunite (melt channel material) and a veined spinel wehrlite, have high ?44/40Ca values (1.22‰ and 1.38‰), which may be due to isotope fractionation by diffusion during silicate melt intrusion and percolation in the host mantle. Overall, we find no evidence that recycling of crustal carbonates may greatly affect Ca isotope values in the global mantle or on a regional scale.
Geochimica et Cosmochimica Acta, Vol. 248, pp. 1-13.
Mantle
carbonatite
Abstract: Ca isotopes can be strongly fractionated at the Earth’s surface and thus may be tracers of subducted carbonates and other Ca-rich surface materials in mantle rocks, magmas and fluids. However, the ?44/40Ca range in the mantle and the scope of intra-mantle isotope fractionation are poorly constrained. We report Ca isotope analyses for 22 mantle xenoliths: four basalt-hosted refractory peridotites from Tariat in Mongolia and 18 samples from the Obnazhennaya (Obn) kimberlite on the NE Siberian craton. Obn peridotites are Paleoproterozoic to Archean melting residues metasomatised by carbonate-rich and/or silicate melts including unique xenoliths that contain texturally equilibrated carbonates. ?44/40Ca in 15 Obn xenoliths shows limited variation (0.74-0.97‰) that overlaps the value (0.94?±?0.05‰) inferred for the bulk silicate Earth from data on fertile lherzolites, but is lower than ?44/40Ca for non-metasomatised refractory peridotites from Mongolia (1.10?±?0.03‰). Bulk ?44/40Ca in four Obn peridotites containing metasomatic carbonates ranges from 0.81?±?0.08‰ to 0.83?±?0.06‰, with similar values in acid-leachates and leaching residues, indicating isotopic equilibration of the carbonates with host rocks. We infer that (a) metasomatism tends to decrease ?44/40Ca values of the mantle, but its effects are usually limited (?0.3‰); (b) Ca isotopes cannot distinguish "carbonatite" and "silicate" types of mantle metasomatism. The lowest ?44/40Ca value (0.56‰) was obtained for a phlogopite-bearing Obn peridotite with a very high Ca/Al of 8 suggesting that the greatest metasomatism-induced Ca isotope shifts may be seen in rocks initially low in Ca that experienced significant Ca input leading to high Ca/Al. Two Obn peridotites, a dunite (melt channel material) and a veined spinel wehrlite, have high ?44/40Ca values (1.22‰ and 1.38‰), which may be due to isotope fractionation by diffusion during silicate melt intrusion and percolation in the host mantle. Overall, we find no evidence that recycling of crustal carbonates may greatly affect Ca isotope values in the global mantle or on a regional scale.
Geochimica et Cosmochimica Acta, Vol. 248, pp. 1-13.
Mantle, Asia, Mongolia, Russia, Siberia
metasomatism
Abstract: Ca isotopes can be strongly fractionated at the Earth’s surface and thus may be tracers of subducted carbonates and other Ca-rich surface materials in mantle rocks, magmas and fluids. However, the ?44/40Ca range in the mantle and the scope of intra-mantle isotope fractionation are poorly constrained. We report Ca isotope analyses for 22 mantle xenoliths: four basalt-hosted refractory peridotites from Tariat in Mongolia and 18 samples from the Obnazhennaya (Obn) kimberlite on the NE Siberian craton. Obn peridotites are Paleoproterozoic to Archean melting residues metasomatised by carbonate-rich and/or silicate melts including unique xenoliths that contain texturally equilibrated carbonates. ?44/40Ca in 15 Obn xenoliths shows limited variation (0.74-0.97‰) that overlaps the value (0.94?±?0.05‰) inferred for the bulk silicate Earth from data on fertile lherzolites, but is lower than ?44/40Ca for non-metasomatised refractory peridotites from Mongolia (1.10?±?0.03‰). Bulk ?44/40Ca in four Obn peridotites containing metasomatic carbonates ranges from 0.81?±?0.08‰ to 0.83?±?0.06‰, with similar values in acid-leachates and leaching residues, indicating isotopic equilibration of the carbonates with host rocks. We infer that (a) metasomatism tends to decrease ?44/40Ca values of the mantle, but its effects are usually limited (?0.3‰); (b) Ca isotopes cannot distinguish “carbonatite” and “silicate” types of mantle metasomatism. The lowest ?44/40Ca value (0.56‰) was obtained for a phlogopite-bearing Obn peridotite with a very high Ca/Al of 8 suggesting that the greatest metasomatism-induced Ca isotope shifts may be seen in rocks initially low in Ca that experienced significant Ca input leading to high Ca/Al. Two Obn peridotites, a dunite (melt channel material) and a veined spinel wehrlite, have high ?44/40Ca values (1.22‰ and 1.38‰), which may be due to isotope fractionation by diffusion during silicate melt intrusion and percolation in the host mantle. Overall, we find no evidence that recycling of crustal carbonates may greatly affect Ca isotope values in the global mantle or on a regional scale.
Abstract: Conventional diamond exploration seldom searches directly for diamonds in rock and soil samples. Instead, it focuses on the search for indicator minerals like chrome spinel, which can be used to evaluate diamond potential. Chrome spinels are preserved as pristine minerals in the early Paleozoic (?465 Ma), hydrothermally altered, Group I No. 30 pipe kimberlite that intruded the Neoproterozoic Qingbaikou strata in Wafangdian, North China Craton (NCC). The characteristics of the chrome spinels were investigated by petrographic observation (BSE imaging), quantitative chemical analysis (EPMA), and Raman spectral analysis. The results show that the chrome spinels are mostly sub-rounded with extremely few grains being subhedral, and these spinels are macrocrystic, more than 500 µm in size. The chrome spinels also have compositional zones: the cores are classified as magnesiochromite as they have distinctly chromium-rich (Cr2O3 up to 66.56 wt%) and titanium-poor (TiO2 < 1 wt%) compositions; and the rims are classified as magnetite as they have chromium-poor and iron-rich composition. In the cores of chrome spinels, compositional variations are controlled by Al3+-Cr3+ isomorphism, which results in a strong Raman spectra peak (A1g mode) varying from 690 cm?1 to 702.9 cm?1. In the rims of chrome spinel, compositional variations result in the A1g peak varying from 660 cm?1 to 672 cm?1. The morphology and chemical compositions indicate that the chrome spinels are mantle xenocrysts. The cores of the spinel are remnants of primary mantle xenocrysts that have been resorbed, and the rims were formed during kimberlite magmatism. The compositions of the cores are used to evaluate the diamond potential of this kimberlite through comparison with the compositions of chrome spinels from the Changmazhuang and No. 50 pipe kimberlites in the NCC. In MgO, Al2O3 and TiO2 versus Cr2O3 plots, the chrome spinels from the Changmazhuang and No. 50 pipe kimberlites are mostly located in the diamond stability field. However, only a small proportion of chrome spinels from No. 30 pipe kimberlite have same behavior, which indicates that the diamond potential of the former two kimberlites is greater than that of the No. 30 pipe kimberlite. This is also supported by compositional zones in the spinel grains: there is with an increase in Fe3+ in the rims, which suggests that the chrome spinels experienced highly oxidizing conditions. Oxidizing conditions may have been imparted by fluids/melts that have a great influence on diamond destruction. Here, we suggest that chrome spinel compositions can be a useful tool for identifying the target for diamond potential in the North China Craton.
Abstract: The grade and morphological character of kimberlite-hosted diamonds were compared to crystallization temperature (T) and oxygen fugacity (fO2) estimated from groundmass spinels in six kimberlite pipes in the North China Craton (NCC). Crystallization temperatures calculated at an assumed pressure of 1 GPa are in the range of 1037-1395 °C, with a mean of 1182 °C. At these temperatures, the estimated fO2 varies from 1.2 to 3.1 log units below the nickel-nickel oxide (NNO) buffer. Generally, individual kimberlite pipe shows a small variation of the T (50-100 °C) and fO2 (0.4-0.6 log units), whereas different kimberlite pipes present great changes of T and fO2 which can be up to 300 °C and 2 units respectively. The fO2 of kimberlite magma shows a strong negative correlation with the diamond grade of kimberlite, suggesting that the fO2 plays an important role in diamond resorption, whereas the T shows no relationship with the diamond grade, indicating the T plays no role in diamond resorption. The conditions of kimberlite crystallization (fO2) can be a useful parameter in evaluating diamond survival in diamond exploration.
Abstract: The grade and morphological character of kimberlite-hosted diamonds were compared to crystallization temperature (T) and oxygen fugacity ( f O 2 ) estimated from groundmass spinels in six kimberlite pipes in the North China Craton (NCC). Crystallization temperatures calculated at an assumed pressure of 1 GPa are in the range of 1037-1395 °C, with a mean of 1182 °C. At these temperatures, the estimated f O 2 varies from 1.2 to 3.1 log units below the nickel-nickel oxide (NNO) buffer. Generally, individual kimberlite pipe shows a small variation of the T (50-100 °C) and f O 2 (0.4-0.6 log units), whereas different kimberlite pipes present great changes of T and f O 2 which can be up to 300 °C and 2 units respectively. The f O 2 of kimberlite magma shows a strong negative correlation with the diamond grade of kimberlite, suggesting that the f O 2 plays an important role in diamond resorption, whereas the T shows no relationship with the diamond grade, indicating the T plays no role in diamond resorption. The conditions of kimberlite crystallization ( f O 2 ) can be a useful parameter in evaluating diamond survival in diamond exploration.
Abstract: The newly-discovered supergiant Huayangchuan uranium (U)-polymetallic deposit is situated in the Qinling Orogen, Central China. The deposit contains economic endowments of U, Nb, Pb, Se, Sr, Ba and REEs, some of which (e.g., U, Se, and Sr) reaching super-large scale. Pyrochlore, allanite, monazite, barite-celestite and galena are the major ore minerals at Huayangchuan. Uranium is mainly hosted in the primary mineral of pyrochlore, and the mineralization is mainly hosted in or associated with carbonatite dikes. According to the mineral assemblages and crosscutting relationships, the alteration/mineralization at Huayangchuan comprises four stages, i.e., pegmatite REE mineralization (I), main mineralization (II), skarn mineralization (III) and post-ore alteration (IV). Coarse-grained euhedral allanite is the main Stage I REE mineral, and the pegmatite-hosted REE mineralization (ca. 1.8 Ga) occurs mostly in the shallow-level of northwestern Huayangchuan, corresponding to the Paleoproterozoic Xiong'er Group volcanic rocks (1.80-1.75 Ga) in the southern margin of North China Block. Carbonatite-hosted Stage II mineralization contributes to the majority of U-Nb-REE-Ba-Sr resources, and is controlled by the Huayangchuan Fault. Stage II mineralization can be further divided into the sulfate mineralization (barite-celestite) (II-A), alkali-rich U mineralization (aegirine-augite + pyrochlore + uraninite + uranothorite) (II-B) and REE (allanite + monazite + chevkinite)-U (pyrochlore + uraninite) mineralization (II-C) substages. Stage II mineralization may have occurred during the Late Triassic Mianlue Ocean closure. Skarn mineralization contributed to the majority of Pb and minor U-REE (uraninite-allanite) resources at Huayangchuan, and is spatially associated with the Late Cretaceous-Early Jurassic (Yanshanian) Huashan and Laoniushan granites. We suggested that hydrothermal fluids derived from the Laoniushan and Huashan granites may have reacted with the Triassic carbonatites, and formed the Huayangchuan Pb skarn mineralization. The mantle-derived Triassic carbonatites may have been fertilized by the U-rich subducting oceanic sediments, and were further enriched through reacting with the Proterozoic U-REE-rich pegmatite wallrocks at Huayangchuan. Ore-forming elements were likely transported in metal complexes (F?, and ), and deposited with the dilution of the complex concentration. This may have formed the distinct vertical mineralization zoning, i.e., sodic fenite-related alkali-U mineralization at depths and potassic fenite-related REE-U mineralization at shallow level.
Abstract: The newly-discovered supergiant Huayangchuan uranium (U)-polymetallic deposit is situated in the Qinling Orogen, Central China. The deposit contains economic endowments of U, Nb, Pb, Se, Sr, Ba and REEs, some of which (e.g., U, Se, and Sr) reaching super-large scale. Pyrochlore, allanite, monazite, barite-celestite and galena are the major ore minerals at Huayangchuan. Uranium is mainly hosted in the primary mineral of pyrochlore, and the mineralization is mainly hosted in or associated with carbonatite dikes. According to the mineral assemblages and crosscutting relationships, the alteration/mineralization at Huayangchuan comprises four stages, i.e., pegmatite REE mineralization (I), main mineralization (II), skarn mineralization (III) and post-ore alteration (IV). Coarse-grained euhedral allanite is the main Stage I REE mineral, and the pegmatite-hosted REE mineralization (ca. 1.8 Ga) occurs mostly in the shallow-level of northwestern Huayangchuan, corresponding to the Paleoproterozoic Xiong'er Group volcanic rocks (1.80-1.75 Ga) in the southern margin of North China Block. Carbonatite-hosted Stage II mineralization contributes to the majority of U-Nb-REE-Ba-Sr resources, and is controlled by the Huayangchuan Fault. Stage II mineralization can be further divided into the sulfate mineralization (barite-celestite) (II-A), alkali-rich U mineralization (aegirine-augite + pyrochlore + uraninite + uranothorite) (II-B) and REE (allanite + monazite + chevkinite)-U (pyrochlore + uraninite) mineralization (II-C) substages. Stage II mineralization may have occurred during the Late Triassic Mianlue Ocean closure. Skarn mineralization contributed to the majority of Pb and minor U-REE (uraninite-allanite) resources at Huayangchuan, and is spatially associated with the Late Cretaceous-Early Jurassic (Yanshanian) Huashan and Laoniushan granites. We suggested that hydrothermal fluids derived from the Laoniushan and Huashan granites may have reacted with the Triassic carbonatites, and formed the Huayangchuan Pb skarn mineralization. The mantle-derived Triassic carbonatites may have been fertilized by the U-rich subducting oceanic sediments, and were further enriched through reacting with the Proterozoic U-REE-rich pegmatite wallrocks at Huayangchuan. Ore-forming elements were likely transported in metal complexes (F?, and ), and deposited with the dilution of the complex concentration. This may have formed the distinct vertical mineralization zoning, i.e., sodic fenite-related alkali-U mineralization at depths and potassic fenite-related REE-U mineralization at shallow level.
Abstract:
Carbonatitic magmatism plays a significant role in outgassing carbon from mantle and the formation of rare earth element (REE), rare metal (e.g., Nb and Th) and other types of deposits. The mechanism of REE mineralization associated with carbonatite have been widely studied. However, it is hard to understand U-Nb mineralization without Th enrichment associated with carbonatite. Here we report a carbonatite-hosted U-Nb deposit in Huayangchuan, located in the north Qinling Orogenic Belt. Field observation, mineralogy and geochemical analysis on a suite of drillhole samples were conducted to decipher the mineralization mechanism and its relationship with carbonatite. Huayangchuan carbonatite samples mainly consist of calcite and augite with small volume of accessory minerals (e.g., allanite, fluorapatite, barite and celestite). Betafite [(Ca,U)2(Ti,Nb,Ta)2O6(OH)] is the major ore-bearing mineral in Huayangchuan deposit. The carbonatite shows high CaO, low MgO and alkali contents, which should be products to be differentiated from primary carbonatite (high MgO and alkali contents). The immiscibility and crystallization processes could explain the high CaO/(CaO + MgO + FeO) ratios and the enrichment of LILE. Numerical modeling also indicates positive ?18OSMOW (7.29 to 15.53‰) and negative ?13CPDB (?5.26 to ?10.08‰) shifts are induced by reduced sediments assimilation from source consistent with there being enriched Sr-Nd and low Mg isotopic compositions. LA-ICP-MS zircon U-Pb dating of Huayangchuan carbonatite yielded Triassic ages of 229 ± 3 Ma, which corresponds to the post-collision stage of Qinling Orogen during the middle-late Triassic. We then proposed that the recycling of subducted sediments and later re-melting of those materials in shallow mantle generated the Huayangchuan carbonatite and subsequently formed the Huayangchuan deposit. Fluorine concentration decrease, caused by fluorapatite crystallization, ultimately resulted in betafite mineralization.
Devriese, S.G.R., Corcoran, N., Cowan, D., Davis, K., Bild-Enkin, D., Fournier, D., Heagy, L., Kang, S., Marchant, D., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Magnetic inversion of three airborne dat a sets over the Tli Kwi Cho kimberlite complex.
SEG Annual Meeting Denver, pp. 1790-1794 extended abstract
Fournier, D., Heagy, L., Corcoran, N., Devriese, S.G.R., Bild-Enkin, D., Davis, K., Kang, S., Marchant, D., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Multi-EM systems inversion - towards a common conductivity model for Tli Kwi Cho complex.
SEG Annual Meeting Denver, pp. 1795-1798. Extended abstract
Devriese, S.G.R., Corcoran, N., Cowan, D., Davis, K., Bild-Enkin, D., Fournier, D., Heagy, L., Kang, S., Marchant, D., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Abstract: The magnetic and electromagnetic responses from airborne systems at Tli Kwi Cho, a kimberlite complex in the Northwest Territories, Canada, have received considerable attention over the last two decades but a complete understanding of the causative physical properties is not yet at hand. Our analysis is distributed among three papers. In the first, we find a 3D magnetic susceptibility model for the area; in the second, we find a 3D conductivity model; and in the third paper, we find a 3D chargeability model. Our goal is to explain all the geophysical results within a geologic framework. In this first paper, we invert three independent airborne magnetic data sets flown over the Tli Kwi Cho kimberlite complex located in the Lac de Gras kimberlite field in Northwest Territories, Canada. The complex consists of two kimberlites known as DO-27 and DO-18. An initial airborne DIGHEM survey was flown in 1992 and AeroTEM and VTEM data subsequently acquired in 2003 and 2004, respectively. In this paper, we invert each magnetic data set in three dimensions. Both kimberlites are recovered in each model, with DO-27 as a more susceptible body than DO-18. Our goal is to simultaneously invert the three data sets to generate a single susceptibility model for Tli Kwi Cho. This project is part of a larger, on-going investigation by UBC-GIF on inverting magnetic, electromagnetic, and induced polarization data from the Tli Kwi Cho area.
Fournier, D., Heagy, L., Corcoran, N., Cowan, D., Devriese, S.G.R., Bild-Enkin, D., Davis, K., Kang, S., Marchant, D., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Abstract: The magnetic and electromagnetic responses from airborne systems at Tli Kwi Cho, a kimberlite complex in the Northwest Territories, Canada, have received considerable attention over the last two decades but a complete understanding of the causative physical properties is not yet at hand. Our analysis is distributed among three posters. In the first we find a 3D magnetic susceptibility model for the area; in the second we find a 3D conductivity model; and in the third we find a 3D chargeability model that can explain the negative transient responses measured over the kimberlite pipes. In this second paper we focus upon the task of finding a conductivity model that is compatible with three airborne data sets flown between 1992 and 2004: one frequency-domain data set (DIGHEM) and two time-domain systems (AeroTEM and VTEM). The goal is to obtain a 3D model from which geologic questions can be answered, but even more importantly, to provide a background conductivity needed to complete the 3D IP inversion of airborne EM data. We begin by modifying our pre-existing 1D frequency and time domain inversion codes to produce models that have more lateral continuity. The results are useful in their own right but we have also found that 1D analysis is often very effective in bringing to light erroneous data, assisting in estimating noise floors, and providing some starting information for developing a background model for the 3D EM inversion. Here we show some results from our Laterally Constrained Inversion (LCI) framework. The recovered conductivity models seem to agree on the general location of the kimberlite pipes but disagree on the geometry and conductivity values at depth. The complete 3D inversions in time and frequency, needed to resolved these issues, are currently in progress.
Devriese, S.G.R., Corcoran, N., Cowan, D., Davis, K., Bild-Enkin, D., Fournier, D., Heagy, L., Kang, S., Marchant, D., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Abstract: The magnetic and electromagnetic responses from airborne systems at Tli Kwi Cho, a kimberlite complex in the Northwest Territories, Canada, have received considerable attention over the last two decades but a complete understanding of the causative physical properties is not yet at hand. Our analysis is distributed among three papers. In the first, we find a 3D magnetic susceptibility model for the area; in the second, we find a 3D conductivity model; and in the third paper, we find a 3D chargeability model. Our goal is to explain all the geophysical results within a geologic framework. In this first paper, we invert three independent airborne magnetic data sets flown over the Tli Kwi Cho kimberlite complex located in the Lac de Gras kimberlite field in Northwest Territories, Canada. The complex consists of two kimberlites known as DO-27 and DO- 18. An initial airborne DIGHEM survey was flown in 1992 and AeroTEM and VTEM data subsequently acquired in 2003 and 2004, respectively. In this paper, we invert each magnetic data set in three dimensions. Both kimberlites are recovered in each model, with DO-27 as a more susceptible body than DO-18. Our goal is to simultaneously invert the three data sets to generate a single susceptibility model for Tli Kwi Cho. This project is part of a larger, on-going investigation by UBC-GIF on inverting magnetic, electromagnetic, and induced polarization data from the Tli Kwi Cho area.
ASEG-PESA-AIG 2016 25th Geophysical Conference, 4p. Pdf
Canada, Northwest Territories
Deposit - Tli Kwi Cho
Abstract: In this study, we revisit three airborne EM surveys over Tli Kwi Cho (TKC). These consist of a frequency domain DIGHEM data set, and two time domain surveys, VTEM and AeroTEM. Negative transients have been recorded in both of the time domain surveys and we interpret these as arising from chargeable bodies. The kimberlite pipes are referred to as DO-27 and DO-18. We look in more detail at the transient data and apply the ATEM-IP inversion procedure to recover a 3D pseudo-chargeability distribution. Important components of the analysis involve estimating a background conductivity for the region. For DO-27 we have used a 3D parametric inversion to recover the conductivity from TEM data. The IP signal for the inversion is obtained by subtracting the time domain responses estimated by EM inversion from the observed background signal. This process also removes EM coupling noise that might be contaminating the data. The resultant IP data are inverted with a linear inverse approach using the sensitivity from the background conductivity. This yields a 3D model of pseudo-chargeability.
Society of Exploration Geophysicists, Interpretation, August T 313, 13p.
Canada, Northwest Territories
deposit - Tli Kwi Cho
Abstract: We focus on the task of finding a 3D conductivity structure for the DO-18 and DO-27 kimberlites, historically known as the Tli Kwi Cho (TKC) kimberlite complex in the Northwest Territories, Canada. Two airborne electromagnetic (EM) surveys are analyzed: a frequency-domain DIGHEM and a time-domain VTEM survey. Airborne time-domain data at TKC are particularly challenging because of the negative values that exist even at the earliest time channels. Heretofore, such data have not been inverted in three dimensions. In our analysis, we start by inverting frequency-domain data and positive VTEM data with a laterally constrained 1D inversion. This is important for assessing the noise levels associated with the data and for estimating the general conductivity structure. The analysis is then extended to a 3D inversion with our most recent optimized and parallelized inversion codes. We first address the issue about whether the conductivity anomaly is due to a shallow flat-lying conductor (associated with the lake bottom) or a vertical conductive pipe; we conclude that it is the latter. Both data sets are then cooperatively inverted to obtain a consistent 3D conductivity model for TKC that can be used for geologic interpretation. The conductivity model is then jointly interpreted with the density and magnetic susceptibility models from a previous paper. The addition of conductivity enriches the interpretation made with the potential fields in characterizing several distinct petrophysical kimberlite units. The final conductivity model also helps better define the lateral extent and upper boundary of the kimberlite pipes. This conductivity model is a crucial component of the follow-up paper in which our colleagues invert the airborne EM data to recover the time-dependent chargeability that further advances our geologic interpretation.
Society of Exploration Geophysicists, Interpretation, August T 327, 14p.
Canada, Northwest Territories
deposit -Tli Kwi Cho
Abstract: The geologically distinct DO-27 and DO-18 kimberlites, often called the Tli Kwi Cho (TKC) kimberlites, have been used as a testbed for airborne geophysical methods applied to kimberlite exploration. This paper, which is the last of a three-part series, focuses on extracting chargeability information from time-domain electromagnetic (TEM) data. Three different TEM surveys, having similar coincident-loop geometry, have been carried out over TKC. Each records negative transients over the main kimberlite units and this is a signature of induced polarization (IP) effects. By applying a TEM-IP inversion workflow to a VTEM data set we decouple the EM and IP responses in the observations and then recover 3D pseudo-chargeability models at multiple times. A subsequent analysis is used to recover Cole-Cole parameters. Our models demonstrate that both DO-18 and DO-27 pipes are chargeable, but they have different Cole-Cole time constants: 110 and 1160 ?s, respectively. At DO-27, we also distinguish between two adjacent kimberlite units based on their respective Cole-Cole time constants. Our chargeability models are combined with the den-sity, magnetic susceptibility and conductivity models from Papers I and II and allow us to build a 3D petrophysical model of TKC using only information obtained from airborne geophysics. Comparison of this final petrophysical model to a 3D geological model derived from the extensive drilling program demonstrates that we can characterize the three main kimberlite units at TKC: HK, VK, and PK in 3D by using airborne geophysics.
Earth and Planetary Science Letters, Vol. 456, pp. 134-145.
Mantle
Bridgemanite
Abstract: The lower mantle is estimated to be composed of mostly bridgmanite and a smaller percentage of ferropericlase, yet very little information exists for two-phase deformation of these minerals. To better understand the rheology and active deformation mechanisms of these lower mantle minerals, especially dislocation slip and the development of crystallographic preferred orientation (CPO), we deformed mineral analogs neighborite (NaMgF3, iso-structural with bridgmanite) and halite (NaCl, iso-structural with ferropericlase) together in the deformation-DIA at the Advanced Photon Source up to 51% axial shortening. Development of CPO was recorded in situ with X-ray diffraction, and information on microstructural evolution was collected using X-ray microtomography. Results show that when present in as little as 15% volume, the weak phase (NaCl) controls the deformation. Compared to single phase NaMgF3 samples, samples with just 15% volume NaCl show a reduction of CPO in NaMgF3 and weakening of the aggregate. Microtomography shows both NaMgF3 and NaCl form highly interconnected networks of grains. Polycrystal plasticity simulations were carried out to gain insight into slip activity, CPO evolution, and strain and stress partitioning between phases for different synthetic two-phase microstructures. The results suggest that ferropericlase may control deformation in the lower mantle and reduce CPO in bridgmanite, which implies a less viscous lower mantle and helps to explain why the lower mantle is fairly isotropic.
Journal of African Earth Sciences, Vol. 146, pp. 28-47.
Africa, Cameroon
craton
Abstract: Field, microstructural, and anisotropy of magnetic susceptibility (AMS, magnetic fabrics) studies assessed the Pan-African deformational history and strain geometry at the southern margin of the Central African Fold Belt (CAFB) against the older, cratonic basement of the Congo Shield (CS). Reflected light microscopy and thermomagnetic studies supported the identification of magnetic minerals. Data cover a low angle thrust margin (Mbengis-Sangmelima area) in the east and high angle shear zones cutting the margin (Kribi area) in the west, at the Atlantic coast. In the CS basement units, magnetic anisotropy is generally higher than in the low grade Pan-African units. In the latter, early D1/D2 shortening produced a flat-lying magnetic foliation parallel with the regional trend of the belt, a shallow magnetic lineation, and mostly oblate fabrics. Subsequent D3 deformation is only of local importance in the Mbengis-Sangmelima area. The magnetic lineation shows distinct maxima in NNE-SSW direction, parallel with the low angle tectonic transport direction. In the Kribi area, the NNE-SSW trending Kribi-Campo shear zone (KCSZ) affected both older rocks and Pan-African high grade metapelites of the Yaoundé unit together with their basal thrust. The early planar fabric (S1) was overprinted during D2 folding under relatively high T conditions, and subsequent D3 wrenching. Magnetic fabrics document a progressive change from oblate towards prolate ellipsoids towards the KCSZ. Magnetic foliations with medium to steep dips curve into the N-S to NE-SW orientation of the KCSZ, lineations follow the same trend with shallow to medium plunges. This fabric implies that the KCSZ is a Pan-African strike-slip shear zone with a subordinate component of compression. Strike-slip tectonics in the west (KCSZ) and thrusting in the east imply N-S to NE-SW convergence during Pan-African terrane assembly against the present northern margin of the CS. In addition, the KCSZ may separate the CS from the São Francisco Craton in Brazil and thus be the northern part of a link connecting the CAFB to the West Congo Belt in the south. This putative Pan-African link separated the São Francisco Craton from the Congo Shield prior to Mesozoic Gondwana break-up.
Physics of the Earth and Planetary Interiors, Vol. 306, 106543, 9p. Pdf
India
geophysics -seismic
Abstract: The south Indian shield, primarily consisting of Archean cratons and Cretaceous-Tertiary Deccan Volcanic Province (DVP), has undergone several major tectonic episodes during its evolution. The Deccan volcanism at Cretaceous-Tertiary (~65 Ma) is the last major tectono-thermal event, which influenced a substantial part of the south Indian shield. To understand the influence of the Deccan volcanism on the evolution of the south Indian shield, we study the crustal seismic structure of the ~65 Ma Deccan Volcanic Province and the adjacent ~2.6 Ga Eastern Dharwar Craton (EDC), which forms the basement of the volcanic terrain. We calculate teleseismic receiver functions for 18 broadband seismic stations along a ~1000 km long seismological profile that cut across both the EDC and DVP. The analysis and modelling, using H-Vp/Vs stacking and generalized neighbourhood algorithm inversion of the receiver functions show distinct crustal structure (crustal thickness, average composition, shear wave velocity variation, nature of crust-mantle boundary, etc.) across the EDC and DVP. The results clearly indicate that the crustal structure is heterogeneous beneath the DVP compared to a relatively uniform structure below the EDC. Using results from this study along with earlier results, we infer that the present Eastern Dharwar Craton terrain is not affected by any tectono-thermal event for a long geological time, including the Deccan volcanism. Whereas, the present Deccan Volcanic Province is highly affected by the Reunion mantle plume-crust interaction.
Journal of African Earth Sciences, Vol. 113, pp. 35-50.
Africa, Cameroon
Geochemistry
Abstract: Trace element abundances in three indicator minerals (corundum, chrysoberyl, and zircon grains) from the western Mamfe gem placers, as determined by LA-ICP-MS analytical techniques, are shown to be sensitive to their crystallization conditions and source rock types. Corundum is dominantly composed of Al (standardized at 529,300 ppm), Fe (2496-12,899 ppm), and Ti (46-7070 ppm). Among element ratios, Fe/Mg (73-1107), Fe/Ti (0.5-245.0), Ti/Mg (1-175), and Ga/Mg (4-90) are generally higher whereas, Cr/Ga (<0.072) is low. The Fe (?12,899), Ga (?398), Mg (2-62), Cr (1.1-33.0), and V (3.0-93.0) contents (in ppm) mostly typify corundum grains formed in magmatic rocks, although some are metamorphic affiliated. A very higher Ti and significantly low Ga, Ta and Nb contents in some blue grains, suggest interesting concentrations of those high-tech metals in their source rocks. Chrysoberyl is dominantly composed of Al (standardized at 425,000 ppm) and Be (62701-64371 ppm). Iron (7605-9225 ppm), Sn (502-3394 ppm), and Ti (33-2251 ppm) contents are high, whereas Ga (333-608 ppm), Ta (<456.0 ppm), and Nb (<3.0 ppm) are significantly low. The high (Be and Sn) and significantly low Ga-Rb abundances, and Ta > Nb in the western Mamfe chrysoberyls show that they were crystallized in granitic pegmatites, with some of those source rocks being enriched in Ta and Sn. Zirconium oxide (ZrO2: standardized at 66.1 wt.%)) is the only major oxide in analysed coarse-grained zircons. Within the minor elementary suites: Hf (4576-12,565 ppm) and Y (48-2805 ppm) contents are significantly high. The trace element suites include: Th (7-1565 ppm), U (13-687 ppm), and ?REE (50-2161 ppm), whose values are significantly low. The (Yb/Sm)N, Ce/Ce*, and Eu/Eu* anomalies range from 1.0 to 227.0, 0 to 308, and 0.08 to 1.7 respectively. They are Hf-Y-HREE enriched and depleted zircons mainly crystallized in magmatic oxidized environments. They were mainly sorted from granitoids, syenites and kimberlites.
Abstract: The article reports basic design parameters of open pit mines of ALROSA, as well as criteria and factors that govern the choice of production capacity of an open pit diamond mine under conditions of permafrost. The analytical relations and tables to calculate open pit mine life are presented, and the influence of the rate of the downward advance of an open pit mine on its capacity is demonstrated. The authors formulate key provisions for a paragraph of the national standard of RF enabling systematization of approaches to optimization of open diamond mining parameters.
Keepler, H., Dubrovinsky, L.S., Narygina, O., Kantor, I.
Optical absorption and radioactive thermal conductivity silicate perovskite to 125 Gpa at high pressures, silicate perovskite, abundant in Earth's mantle....
Science, Vol. 322, 5907 Dec. 5, pp. 1529-1531.
Mantle
Geothermometry Radioactive heat important in deep Earth
Cerantola, V., Bykova, E., Kupenko, I., Merlini, M., Ismailova, L., McCammon, C., Bykov, M., Chumakov, A.I., Petitgirard, S., Kantor, I., Svityk, V., Jacobs, J., Hanfland, M., Mezouar, M., Prescher, C., Ruffer, R., Prakapenka, V.B., Duvbovinsky, L.
Abstract: The Earth’s crust-mantle boundary, the Mohorovi?i? discontinuity, has been traditionally considered to be the interface between the magnetic crust and the non-magnetic mantle1. However, this assumption has been questioned by geophysical observations2,3 and by the identification of magnetic remanence in mantle xenoliths4, which suggest mantle magnetic sources. Owing to their high critical temperatures, iron oxides are the only potential sources of magnetic anomalies at mantle depths5. Haematite (?-Fe2O3) is the dominant iron oxide in subducted lithologies at depths of 300 to 600 kilometres, delineated by the thermal decomposition of magnetite and the crystallization of a high-pressure magnetite phase deeper than about 600 kilometres6. The lack of data on the magnetic properties of haematite at relevant pressure-temperature conditions, however, hinders the identification of magnetic boundaries within the mantle and their contribution to observed magnetic anomalies. Here we apply synchrotron Mössbauer source spectroscopy in laser-heated diamond anvil cells to investigate the magnetic transitions and critical temperatures in Fe2O3 polymorphs7 at pressures and temperatures of up to 90 gigapascals and 1,300 kelvin, respectively. Our results show that haematite remains magnetic at the depth of the transition zone in the Earth’s mantle in cold or very cold subduction geotherms, forming a frame of deep magnetized rocks in the West Pacific region. The deep magnetic sources spatially correlate with preferred paths of the Earth’s virtual geomagnetic poles during reversals8 that might not reflect the geometry of the transitional field. Rather, the paths might be an artefact caused by magnetized haematite-bearing rocks in cold subducting slabs at mid-transition zone depths. Such deep sources should be taken into account when carrying out inversions of the Earth’s geomagnetic data9, and especially in studies of planetary bodies that no longer have a dynamo10, such as Mars.
Comparative in-situ U-Th-Pb geochronology and trace element composition of baddeleyite and low U zircon from carbonatites of the Paleozoic Kovdor, Kola Pen.
U-Pb and LU-HF isotopic systems in zircons from some kimberlites of the Siberian platform and from Ebeliakh alluvial deposit: age and geochemical pecularities of the source rocks.
10th. International Kimberlite Conference Held Bangalore India Feb. 6-11, Poster abstract
Comparative in-situ U-Th-Pb geochronology and trace element composition of baddeleyite and low U-zircon from carbonatites of the Paleozoic Kovdor alkaline ultramafic complex Kola Peninsula, Russia.
Earth and Planetary Science Letters, Vol. 461, pp. 105-118.
Mantle
Metasomatism
Abstract: Peridotite constitutes most of the Earth's upper mantle, and it is therefore unsurprising that most mantle-derived magmas exhibit evidence of past equilibrium with an olivine-dominated source. Although there is mounting evidence for the role of pyroxenite in magma generation within upwelling mantle plumes, a less documented non-peridotite source of melts are metasomatic veins (metasomes) within the lithospheric mantle. Here we present major and trace element analyses of 66 lavas erupted from a small Miocene shield volcano located within the Ethiopian flood basalt province. Erupted lavas are intercalated with lahars and pyroclastic horizons that are overlain by a later stage of activity manifested in small cinder cones and flows. The lavas form two distinctive petrographic and geochemical groups: (A) an olivine-phyric, low Ti group (1.7-2.7 wt.% TiO2; 4.0-13.6 wt.% MgO), which geochemically resembles most of the basalts in the region. These low Ti lavas are the only geochemical units identified in the later cinder cones and associated lava flows; (B) a clinopyroxene-phyric high Ti group (3.1-6.5 wt.% TiO2; 2.8-9.2 wt.% MgO), which resembles the Oligocene HT-2 flood basalts. This unit is found intercalated with low Ti lavas within the Miocene shield. In comparison to the low Ti group, the high Ti lavas exhibit a profound depletion in Ni, Cr, Al, and Si, and significant enrichment in Ca, Fe, V, and the most incompatible trace elements. A characteristic negative K anomaly in primitive-mantle normalized diagrams, and Na2O > K2O, suggests a source rich in amphibole, devoid of olivine, and perhaps containing some carbonate and magnetite. While melt generation during rift development in Ethiopia is strongly correlated with the thermo-chemical anomalies associated with the African Superplume, thermobaric destabilization and melting of mantle metasomes may also contribute to lithospheric thinning. In regions impacted by mantle plumes, such melts may be critical to weakening of the continental lithosphere and the development of rifts.
Journal of Asian Earth Sciences, Vol. 159, pp. 109-129.
China, Tibet
chromitites
Abstract: The Purang harzburgite massif in SW Tibet (China) hosts abundant chrome ore deposits. Ores consist of 20 to >95% modal chromian spinel (Cr-spinel) with mylonitic fabric in imbricate shaped pods. The composition of Cr-spinel in these ores ranges from Al-rich [Cr#Sp or Cr/(Cr?+?Al)?×?100?=?47.60-57.56] to Cr-rich (Cr#Sp: 62.55-79.57). Bulk platinum-group element (PGE) contents of chromitites are also highly variable ranging from 17.5?ppb to ?2.5?ppm. Both metallurgical and refractory chromitites show a general enrichment in the IPGE (Os, Ir and Ru) with respect to the PPGE (Rh, Pt and Pd), resulting mostly in right-sloping primitive mantle (PM)-normalized PGE profiles. The platinum-group mineral (PGM) assemblages of both chromitite types are dominated by heterogeneously distributed, euhedral Os-bearing laurite inclusions in Cr-spinel. The Purang chromitites have quite inhomogeneous 187Os/188Os ratios (0.12289-0.13194) that are within the range of those reported for mantle-hosted chromitites from other peridotite massifs. Geochemical calculations demonstrate that the parental melts of high-Cr chromitites were boninitic, whereas those of high-Al chromitites had an arc-type tholeiitic affinity. Chromite crystallization was most likely stimulated by changes in magma compositions due to melt-peridotite interaction, leading to the establishment of a heterogeneous physicochemical environment during the early crystallization of the PGM. The highly variable PGE contents, inhomogeneous Os-isotopic compositions and varying Cr#Sp ratios of these chromitites imply a polygenetic origin for them from spatially distinct melt inputs. The generally low ?Os values (<1) of chromitites indicate that their parental melts originated within different sections of a heterogeneously depleted mantle source region. These melts were most likely produced in the mantle wedge above a downgoing lithospheric slab.
Kara, J., Vaisanen, M., Heinonen, J.S., Lahaye, Y., O'Brien, H., Huhma, H.
Tracing arcologites in the Paleoproteroic era - a shift from 1.88 Ga calc-alkaline to 1.86 Ga high-Nb and adakite-like magmatism in central Fennoscandian shield.
Contribution to Mineralogy and Petrology, Vol. 1777, 2, 10.1007/s00410-021-01880-8
Africa, South Africa
deposit - Lace
Abstract: We studied diamond inclusions in the 133 Ma Lace kimberlite of the Kroonstad Group II kimberlite cluster (Kaapvaal craton) to compare them to diamonds beneath the adjacent coeval Voorspoed kimberlite. The studied 288 Lace diamonds are mostly colorless dodecahedral Type IaAB. Based on diamond inclusions (DI), 38 Lace diamonds were classified as eclogitic (44%, 19 samples), peridotitic (35%, 15 samples), and websteritic (9%, 4 samples). The diamonds formed from mantle carbon (?13C?=?? 9.1 to ? 2.5 ‰ for 18 samples), with the exception of one eclogitic diamond (?13C?=?? 19.2 ‰). A rare zircon inclusion provides age constraints for the Lace eclogite protolith at 3.2?±?0.4 Ga (Lu-Hf model age) and Lace eclogite diamond formation at 188?±?37 Ma (U-Pb age). The eclogite protolith age suggests its formation contemporaneous with the lower crustal magmatism and metamorphism in the Central Kaapvaal craton, complementary to the tonalite-trondhjemite-granodiorite magmatism in the region and synchronous with the consolidation of the Eastern Kaapvaal Block. Two distinct kinds of eclogites are found to host Lace diamonds, (1) Fe-rich eclogites located at 160-190 km, and (2) more calcic-magnesian eclogites with mineral compositions identical to websteritic DIs, that derive from shallower lithospheric depths. Various thermobarometric methods applied to Lace diamonds and DIs constrain the Lace geotherm as reflecting a surface heat flow below or equal to 38 mW/m2 and a lithosphere thickness of at least 220 km, at the time of kimberlite eruption. These thermal parameters demonstrate an excellent match between the thermal state of the Voorspoed and Lace mantle segments that persisted from the Archean to Cretaceous times. The Lace peridotitic-to-eclogitic diamond ratio (5/4) does not differ much from the Voorspoed DI ratio (6/4), but a hot and spatially restricted carbonatitic metasomatism event affected the Voorspoed peridotitic mantle to create the majority of Voorspoed diamonds. The contrast in the mineralogy of DIs in Lace and Voorspoed diamonds highlights the very local (ca. 10 km) extent of the metasomatism and heating, as well as the variability of the diamond-forming processes at the same spatial scale.
Abstract: Magmatic processes on Earth govern the mass, energy and chemical transfer between the mantle, crust and atmosphere. To understand magma storage conditions in the crust that ultimately control volcanic activity and growth of continents, an evaluation of the mass and heat budget of the entire crustal column during magmatic episodes is essential. Here we use a numerical model to constrain the physical conditions under which both lower and upper crustal magma bodies form. We find that over long durations of intrusions (greater than 105 to 106?yr), extensive lower crustal mush zones develop, which modify the thermal budget of the upper crust and reduce the flux of magma required to sustain upper crustal magma reservoirs. Our results reconcile physical models of magma reservoir construction and field-based estimates of intrusion rates in numerous volcanic and plutonic localities. Young igneous provinces (less than a few hundred thousand years old) are unlikely to support large upper crustal reservoirs, whereas longer-lived systems (active for longer than 1 million years) can accumulate magma and build reservoirs capable of producing super-eruptions, even with intrusion rates smaller than 10?3 to 10?2?km3?yr?1. Hence, total duration of magmatism should be combined with the magma intrusion rates to assess the capability of volcanic systems to form the largest explosive eruptions on Earth.
Abstract: Mantle xenoliths were found in alkaline basalts of Tokinsky Stanovik (TSt) in the Dzhugdzhur-Stanovoy superterrane (DS) and Vitim plateau (VP) in the Barguzin-Vitim superterrane (BV) (Stanovoy suture area) at junction of the Central Asian Orogenic Belt (CAOB) and the Siberian craton (SC). Xenoliths from TSt basalts are represented by spinel lherzolites, harzburgites, wehrlites; while VP basalts frequently contain spinel-garnet and garnet peridotites lherzolites, and pyroxenites. Xenoliths in kimberlites of the Siberian craton are mainly represented by garnet-bearing lherzolites with abundant eclogite xenoliths (age of 2.7-3.1 Ga), which were not found in mantle of superterranes. The Re-Os determinations point to the Early Archean age of peridotites and eclogites from mantle beneath the Siberian craton. The major and trace (rare-earth and high-filed strength) elements and Nd-Sr-Os composition were analyzed in the peridotites (predominant rocks) of lithospheric mantle at junction of the Central Asian Orogenic Belt and Siberian Craton. The degree of rock depletion in CaO and Al2O3 and enrichment in MgO relative to the primitive mantle in the peridotites of the Dzhugdzhur-Stanovoy superterrane is close to that of the Siberian craton. The peridotites of the Barguzin-Vitim superterrane are characterized by much lower degree of depletion and have mainly a primitive composition. Mantle melting degree reaches up to 45-50% in the Siberian Craton and Dzhugdzhur-Stanovoy superterrane, and is less than 25% in the Barguzin-Vitim terrane. The mantle peridotites of the craton as compared to those of adjacent superterranes are enriched in Ba, Rb, Th, Nb, and Ta and depleted in Y and REE from Sm to Lu. However, all studied peridotites are characterized by mainly superchondritic values of Nb/Ta (>17.4), Zr/Hf (>36.1), Nb/Y (>0.158), and Zr/Y (>2.474). The Nb/Y ratio is predominantly >1.0 in SC peridotites and < 1.0 in the superterrane peridotites. The Nd and Sr isotopic compositions in the latter correspond to those of oceanic basalts. The 187Os/188Os ratio is low (0.108-0.115) in the peridotites of the Siberian Craton and > 0.115 but usually lower than 0.1296 (primitive upper mantle value) in the peridotites of the Dzhugdzhur-Stanovoy and Barguzin-Vitim superterranes. Thus, the geochemical and isotopic composition of peridotites indicates different compositions and types of mantle beneath the Siberian craton and adjacent superterranes of the Central Asian Orogenic Belt in the Early Archean, prior to the formation of 2.7-3.1 Ga eclogites in the cratonic mantle.
Abstract: The strength of subducted slabs in the mantle transition zone influences the style of mantle convection. Intense deformation is observed particularly in relatively old subducted slabs in the deep mantle transition zone. Understanding the cause of this regional and depth variation in slab deformation requires constraint of the rheological properties of deep mantle materials. Here, we report results of in situ deformation experiments during the olivine to ringwoodite phase transformation, from which we infer the deformation process under the conditions of cold slabs deep in the mantle transition zone. We find that newly transformed fine-grained ringwoodite deforms by diffusion creep and that its strength is substantially smaller than that of coarser-grained minerals but increases with time. Scaling analysis, based on a model of transformation kinetics and grain-size evolution during a phase transformation, suggests that a cold slab will be made of a mixture of weak, fine-grained and strong, coarse-grained materials in the deep transition zone, whereas a warm slab remains strong because of its large grain size. We propose that this temperature dependence of grain size may explain extensive deformation of cold slabs in the deep transition zone but limited deformation of relatively warm slabs.
Abstract: Rheological properties of the lower mantle have strong influence on the dynamics and evolution of Earth. By using the improved methods of quantitative deformation experiments at high pressures and temperatures, we deformed a mixture of bridgmanite and magnesiowüstite under the shallow lower mantle conditions. We conducted experiments up to about 100% strain at a strain rate of about 3 × 10(-5) second(-1). We found that bridgmanite is substantially stronger than magnesiowüstite and that magnesiowüstite largely accommodates the strain. Our results suggest that strain weakening and resultant shear localization likely occur in the lower mantle. This would explain the preservation of long-lived geochemical reservoirs and the lack of seismic anisotropy in the majority of the lower mantle except the boundary layers.
Abstract: Experimental observations on the dissolution of elements in minerals and melts and the partitioning between the two materials show that the concentration (or the partition coefficient) of trace elements depends on the properties of elements as well as those of relevant materials (minerals and melts) and the thermochemical conditions. Previous models of element solubility in minerals contain a vague treatment of the role of the stiffness of the element and have a difficulty in explaining some observations including the solubility of the noble gases. A modified theory of element solubility in minerals is presented where the role of elasticity of both matrix mineral and the element is included using the continuum theory of point defects by Eshelby (1951, 1954, 1956). This theory provides a framework to explain the majority of observations and shows a better fit to the published results on the effective elastic constants relevant to element partitioning. However, the concept of “elasticity of the trace element” needs major modification when the site occupied by a trace element has large excess charge. The experimental data of the solubility coefficients of noble gases in melts show strong dependence on the atomic size that invalidates the “zero-charge” model for noble gas partitioning. A simple model of element solubility in melts is proposed based on the hard sphere model of complex liquids that provides a plausible explanation for the difference in the dissolution behavior between noble gases and other charged elements. Several applications of these models are discussed including the nature of noble gas behavior in the deep/early Earth and the water distribution in the lithosphere/asthenosphere system.
Progress in Earth and Planetary Science, Vol. 7, 76 25p. Doi.org/10.1186 /s40645-020-00379-3 pdf
Mantle
water
Abstract: Oceans on Earth are present as a result of dynamic equilibrium between degassing and regassing through the interaction with Earth’s interior. We review mineral physics, geophysical, and geochemical studies related to the global water circulation and conclude that the water content has a peak in the mantle transition zone (MTZ) with a value of 0.1-1 wt% (with large regional variations). When water-rich MTZ materials are transported out of the MTZ, partial melting occurs. Vertical direction of melt migration is determined by the density contrast between the melts and coexisting minerals. Because a density change associated with a phase transformation occurs sharply for a solid but more gradually for a melt, melts formed above the phase transformation depth are generally heavier than solids, whereas melts formed below the transformation depth are lighter than solids. Consequently, hydrous melts formed either above or below the MTZ return to the MTZ, maintaining its high water content. However, the MTZ water content cannot increase without limit. The melt-solid density contrast above the 410 km depends on the temperature. In cooler regions, melting will occur only in the presence of very water-rich materials. Melts produced in these regions have high water content and hence can be buoyant above the 410 km, removing water from the MTZ. Consequently, cooler regions of melting act as a water valve to maintain the water content of the MTZ near its threshold level (~?0.1-1.0 wt%). Mass-balance considerations explain the observed near-constant sea-level despite large fluctuations over Earth history. Observations suggesting deep-mantle melting are reviewed including the presence of low-velocity anomalies just above and below the MTZ and geochemical evidence for hydrous melts formed in the MTZ. However, the interpretation of long-term sea-level change and the role of deep mantle melting in the global water circulation are non-unique and alternative models are reviewed. Possible future directions of studies on the global water circulation are proposed including geodynamic modeling, mineral physics and observational studies, and studies integrating results from different disciplines.
Review of African Political Economy, Vol. 45, no. 158, pp. 522-540.
Africa, Sierra Leone
history
Abstract: This article explores the relationship between the 2014-2016 Ebola outbreak and the political economy of diamond mining in Kono District, Sierra Leone. The authors argue that foreign companies have recycled colonial strategies of indirect rule to facilitate the illicit flow of resources out of Sierra Leone. Drawing on field research conducted during the outbreak and in its aftermath, they show how this ‘indirect rule redux’ undermines democratic governance and the development of revenue-generation institutions. Finally, they consider the linkages between indirect rule and the Ebola outbreak, vis-à-vis the consequences of the region’s intentionally underdeveloped health care infrastructure and the scaffolding of outbreak containment onto the paramount chieftaincy system.
Abstract: Geodynamic processes on early Earth, especially the interaction between the crust and deep mantle, are poorly constrained and subject to much debate. The rarity of fresh igneous materials more than 3 billion years old accounts for much of this uncertainty. Here we examine 3.27-billion-year-old komatiite lavas from Weltevreden Formation in the Barberton greenstone belt, which is part of the Kaapvaal Craton in Southern Africa. We show that primary magmatic compositions of olivine are well preserved in these lavas based on major and trace element systematics. These komatiitic lavas represent products of deep mantle plumes. Oxygen isotope compositions (?18O) of the fresh olivine measured by laser fluorination are consistently lighter (about 2‰) than those obtained from modern mantle-derived volcanic rocks. These results suggest a mantle source for the Weltevreden komatiites that is unlike the modern mantle and one that reflects mantle heterogeneity left over from a Hadean magma ocean. The anomalously light ?18O may have resulted from fractionation of deep magma ocean phases, as has been proposed to explain lithophile and siderophile isotope compositions of Archaean komatiites.
Brazil Journal of Geology, Vol. 44, 1, pp. 91-103.
South America, Brazil
Coromandel district
Abstract: The diamond bearing district of Coromandel is located in the northwestern part of Minas Gerais, within the Alto Paranaíba Arch, famous for the discovery of most of Brazil's large diamonds above 100 ct. Detailed mapping, aimed at characterizing the Mata da Corda Group of Upper Cretaceous age of Coromandel, has been carried out. This Group was divided into the Patos Formation, composed of kimberlitic and kamafugitic rocks, and the Capacete Formation, presented by conglomerates, pyroclastic rocks, arenite and tuffs. Exposures of the latter Formation have been studied in detail at the small abandoned mine called Canastrel, as well as in the headwater of Santo Antônio do Bonito River. The results have been compared to studies of the kimberlite bodies in the nearby Douradinho River. Kimberlite indicator minerals from these localities show the same compositional trend. Moreover, in the basal conglomerate of the Garimpo Canastrel two diamonds diamonds have been recovered and described. The Garimpo Wilson, situated in the headwater of the river Santo Antônio do Bonito in paleo-alluvium, is composed of material exclusively derived from the erosion of the Capacete Formation and Precambrian (sterile) Canastra quartzites and schists. These detailed investigations suggest that the basal conglomerates of the Capacete Formation represent the main source rock of the alluvial diamond deposits in the Coromandel region.
Brazil Journal of Geology, Vol. 44, 2, pp. 325-338.
South America, Brazil, Minas Gerais
Deposit - Coromandel
Abstract: Important diamond deposits southeast of Coromandel and the local geology have been studied in an attempt to understand what surface source provided the stones. River gravels of Pleistocene to Recent age from this region have supplied most of Brazil’s large diamonds over 100 ct. The upper cretaceous Capacete Formation of the Mata da Corda Group, composed of mafic volcanoclastic, pyroclastic and epiclastic material, has been worked locally for diamonds, nevertheless considered non-economic. The authors present results of their study of a deactivated small mine, representing the first report with description and analyses of two gem diamonds washed from this material. Hundreds of kimberlites, discovered in the last half century in the region, are sterile or non-economic. We propose that the surface source of the diamonds is the Capacete “conglomerado”. The volume of this material is enormous representing a potential resource for large-scale mining. The authors suggest detailed studies of the volcanic facies of this unit focusing on the genesis, distribution and diamond content. As to the question concerning the origin of these diamondiferous pyroclastic rocks, the authors exclude the kimberlites and point towards the large Serra Negra and Salitre alkaline complexes which are considered the primary source for the pyroclastic units of the Mata da Corda Group. They propose that early eruptive phases of this alkaline complex brought diamonds from a mantle source to the surface, much as happens with traditional kimberlites, to explain the association of such huge carbonatite complexes and diamonds.
Neues Jahrbuch fur Geologie und Palaontologie , Vol. 277, 2, pp. 237-250.
South America, Brazil, Minas Gerais
Deposit - Coromandel
Abstract: The origin of diamonds in the Coromandel area has been an enigma for many years, in spite of high investment in conventional and high tech prospecting methods by major mining companies for over half a century. The authors review the history, and then discuss the two principal hypotheses to explain the source of these alluvial diamonds. After mapping the headwater region of one of the richest alluvial diamond rivers, the Santo Antônio do Bonito River, they reject both principal hypotheses and conclude that the surficial source can be only the Upper Cretaceous Capacete Formation, composed of pyroclastics and epiclastics. Based on geophysical data from the literature, combined with field observations the authors suggest that the largest alkaline complex, situated within the diamond producing area, the Serra Negra/Salitre Complex has been the primary source for those pyroclastics of the Capacete Formation and the diamonds. The plugs of this complex are 15-30 times deeper than average kimberlites and other alkaline complexes in the region, and its excess of volume of the intrusive is three orders of magnitude larger than a typical kimberlite. With an intrusive volume of over 1000 km3 the complex is suggested to be a possible supervolcano. This explains the vast areal distribution of the pyroclastics and diamonds. This new hypothesis has advantages and disadvantages, some of them discussed in the paper and leading to the conclusion that further research is needed.
GSA Annual Meeting, Paper 300-1, 1p. Abstract only Booth
South America, Brazil, Minas Gerais
Deposit - Coromandel
Abstract: The origin of diamonds in the Coromandel area has been an enigma for many years, in spite of high investment in conventional and high tech prospecting methods by major mining companies for over half a century. The authors review the history, and then discuss the two principal hypotheses to explain the source of these alluvial diamonds. After mapping the headwater region of one of the richest alluvial diamond rivers, the Santo Antônio do Bonito River, they reject both principal hypotheses and conclude that the surficial source can be only the Upper Cretaceous Capacete Formation, composed of pyroclastics and epiclastics. Based on geophysical data from the literature, combined with field observations the authors suggest that the largest alkaline complex, situated within the diamond producing area, the Serra Negra/Salitre Complex has been the primary source for those pyroclastics of the Capacete Formation and the diamonds. The plugs of this complex are 15-30 times deeper than average kimberlites and other alkaline complexes in the region, and its excess of volume of the intrusive is three orders of magnitude larger than a typical kimberlite. With an intrusive volume of over 1000 km3 the complex is suggested to be a possible supervolcano. This explains the vast areal distribution of the pyroclastics and diamonds. This new hypothesis has advantages and disadvantages, some of them discussed in the paper and leading to the conclusion that further research is needed.
REM: Revista Escola de Minas, Vol. 67, 2, pp. 159-165. *** in Portuguese
South America, Brazil
Alluvials, diamonds
Abstract: A representative set of diamonds from the Borrachudo River (114 stones) was described for the first time as to their physical characteristics, among them weight, morphology, dissolution figures, and abrasion. Most samples are low in weight (~51% less than 0.30 ct) and only ~3.5% are above 3.0 ct. However, considering the total weight, ~47% of it is concentrated in the range above 3 ct. On the other hand, there even occur diamonds with dozen of carats. The most common crystallographic forms are originated from the octahedral form by dissolution, although irregular shapes like chips and flats also occur. The diamonds show differences in form compared to their weight ranges; those up to 0.30 ct have various shapes; in the range of 0.31 to 1 ct the most common are octahedral forms and their descendants; and in stones larger than 1 ct chips and flats predominate. The general habitus of the crystals, identified by their final tetrahexahedroid shapes, chips and flats, corroborated by the dissolution figures, indicate that the diamond were submitted to strong dissolution in a magmatic environment. Residual hillocks and holes represent the final stage of dissolution. The study indicates that the abrasion by the fluvial transport was not expressive enough to cause mechanical wear, thus ca. 97% shows no sign of wear. This fact suggests a proximal source for most of these diamonds.
The Australian Gemmologist, Vol. 26, 5&6, pp. 88-99.
South America, Brazil, Minas Gerais
deposit - Alto Paranaiba
Abstract: The authors, in a paper in this journal in 2009, note a puzzle, that in spite of extensive exploration for diamonds by major producers in the Alto Paranaiba region of West Minas Gerais State, Brazil, no primary source, such as kimberlites, for the many diamonds produced since their discovery over 250 years has been found. To answer this puzzle we propose that the diamonds are present within a large extrusive volcanic unit probably derived from the Serra Negra alkaline-carbonatitic complex which comprises a super volcano. This origin fits with the 1995 prediction of Nixon on the future direction of diamona-exploration that extrusive units may contain very large volumes of ore, and that carbonatitic emplacement sources need to be considered. The authors argue, based on available evidence from geology and geophysics, that such an origin is compatible with the known data, but that much additional information is needed to substantiate these ideas. Diamonds of the Alto Paraniaba, Brazil: Nixon's prediction verified?
European Geosciences Union General Assembly 2017, Vienna April 23-28, 1p. 220 Abstract
Russia, Archangel, Kola Peninsula
Deposit - Grib
Abstract: Kimberlite is a composite rock that contains juvenile magmatic material and xenoliths of crustal and mantle rocks, including metasomatically reworked rocks and megacrysts. In spite of nearly 40-50 years of continuous study of kimberlites and SCLM, some aspects of their origin remain controversial. In particular, it is unclear yet whether the megacrysts are magmatic or metasomatic in origin and how they are related to kimberlite magmas. In this contribution, we compare the major (EMPA) and trace element (SIMS, LA-ICP-MS) compositions of clinopyroxene megacrysts from the Grib kimberlite (Arkhangelsk province, Russia) with clinopyroxenes from metasomatic clinopyroxene-phlogopite xenoliths and garnet peridotite xenoliths. The Grib kimberlite (376±3 Ma, Larionova et al., 2016) is located in the central part of the Arkhangelsk province (the northern part of the East European craton) in the Chernoozero kimberlite field. The geochemical composition of the kimberlites is similar to widespread South Africa group I kimberlites . The Grib kimberlite is well known for hosting a variety of mantle xenoliths, e.g., garnet peridotite, sheared peridotite, eclogite, metasomatised mantle material, as well as megacrysts of clinopyroxene, garnet, olivine, phlogopite, and ilmenite. The clinopyroxene megacrysts occur as rounded or angular grains up to 2 cm in size. They are usually surrounded by ultrafine kimberlite rim. The xenoliths of the metasomatic clinopyroxene-phlogopite rocks reach up to 6 cm in size and have a granoblastic texture. They consist of clinopyroxene (55 vol. %), phlogopite (45 vol. %) and minor calcite, barite, perovskite. Some clinopyroxene grains contain inclusion of relict olivine that is similar in composition to olivine from mantle-derived peridotite xenoliths within the Grib kimberlite (Sazonova et al., 2015). This suggests that these xenoliths could be formed by metasomatic reworking of SCLM peridotites. The megacryst clinopyroxene is compositionally similar to the clinopyroxene found in metasomatic xenoliths and corresponds to diopside. As compared to the typical clinopyroxene megacrysts worldwide, it has higher Mg# (>0.92), Cr# (0.21-0.62) and Ca# values (0.47-0.49) and lower Ti (659-1966 ppm) composition. The clinopyroxenes have (La/Sm)CI values from 0.58 to 1.57, and trace element patterns with deep negative Ti and shallow negative Zr-Hf anomalies. The major and trace-element compositions of these clinopyroxenes are very close to those of clinopyroxenes from garnet peridotite xenoliths in the Grib pipe (Kargin et al., 2016) that could be formed during the ascent and interaction of kimberlite mamas with a surrounding lithospheric mantle after crystallization of garnet and ilmenite megacrysts. Calculations showed that metasomatic agents in equilibrium with clinopyroxene megacrysts are similar in composition to kimberlite, which is consistent with proposed model. To sum up, we suggest that the formation of clinopyroxenes of megacrysts and mantle-derived clinopyroxene-phlogopite metasomatic xenoliths from the Grib kimberlite was related to the late-stage metasomatic reworking of SCLM by kimberlite magmas.
Mineralogy and Petrology, doi: 10.1007/s00710- 020-00704-0 in press 16p. Pdf
Russia, Arkangel
deposit - Grib
Abstract: To provide new insights into the origin of garnet megacrysts and evolution of kimberlite melts, we studied in detail the polymineralic and monomineralic inclusions and their host garnets from the Grib kimberlite (Arkhangelsk diamond province, Russia). Low-Cr and high-Cr garnet megacrysts and eclogitic garnets contain abundant polymineralic and rare monomineralic inclusions. Monomineralic inclusions presented by clinopyroxene, ilmenite, olivine replaced by serpentine, were found exclusively within the low-Cr megacrysts. The composition of clinopyroxene exhibits geochemical equilibrium with the host garnet, indicating its primary origin during the formation of the megacryst assemblage. The low-Cr garnet-clinopyroxene mineral assemblage formed as a result of high-temperature, melt-associated mantle metasomatism by failed kimberlite within the lithospheric mantle (T = 1150 °C and P = 5.5 GPa). Polymineralic inclusions are characterised by a silicate or silicate-sulphate matrix. The central part of the silicate inclusions is filled by serpentine and contains ilmenite, spinel, perovskite, calcite and apatite. At the contact with host garnets, phlogopite, spinel and amphibole occur as reaction minerals. Composition of spinel and other minerals within inclusions with silicate matrix suggests that kimberlite melt was trapped at mantle pressures. Inclusions with silicate matrix were found in all garnets. The matrix of silicate-sulphate inclusions consists of silicate cryptocrystalline phases and sulphate minerals (celestine-barite) and contains calcite grains. The inclusions are distributed in some low-Cr garnet megacrysts and eclogitic garnet. The silicate-sulphate inclusions were crystallised from the late-stage kimberlite melt. Diverse reaction textures are evidences of disequilibrium between the host crystals and polymineralic inclusions and indicate that garnet and the hosted inclusions reacted with the ascending kimberlite melt. The silicate-sulphate inclusions with a thin rim of epidote within eclogitic garnets indicate that a kimberlite melt invaded the garnet and induced partial melting. The studied inclusions allow us to propose three stages of the Grib kimberlite evolution: 1) generation of garnet megacrysts and primary inclusions due to melt metasomatism, 2) reaction of the high-Ti kimberlite melt with garnet megacrysts (including their dissolution) and 3) alteration of the inclusions in garnet after kimberlite ascent.
Abstract: We present petrography and mineral chemistry for both phlogopite, from mantle-derived xenoliths (garnet peridotite, eclogite and clinopyroxene-phlogopite rocks) and for megacryst, macrocryst and groundmass flakes from the Grib kimberlite in the Arkhangelsk diamond province of Russia to provide new insights into multi-stage metasomatism in the subcratonic lithospheric mantle (SCLM) and the origin of phlogopite in kimberlite. Based on the analysed xenoliths, phlogopite is characterized by several generations. The first generation (Phl1) occurs as coarse, discrete grains within garnet peridotite and eclogite xenoliths and as a rock-forming mineral within clinopyroxene-phlogopite xenoliths. The second phlogopite generation (Phl2) occurs as rims and outer zones that surround the Phl1 grains and as fine flakes within kimberlite-related veinlets filled with carbonate, serpentine, chlorite and spinel. In garnet peridotite xenoliths, phlogopite occurs as overgrowths surrounding garnet porphyroblasts, within which phlogopite is associated with Cr-spinel and minor carbonate. In eclogite xenoliths, phlogopite occasionally associates with carbonate bearing veinlet networks. Phlogopite, from the kimberlite, occurs as megacrysts, macrocrysts, microcrysts and fine flakes in the groundmass and matrix of kimberlitic pyroclasts. Most phlogopite grains within the kimberlite are characterised by signs of deformation and form partly fragmented grains, which indicates that they are the disintegrated fragments of previously larger grains. Phl1, within the garnet peridotite and clinopyroxene-phlogopite xenoliths, is characterised by low Ti and Cr contents (TiO2 < 1 wt.%, Cr2O3 < 1 wt.% and Mg# = 100 × Mg/(Mg + Fe) > 92) typical of primary peridotite phlogopite in mantle peridotite xenoliths from global kimberlite occurrences. They formed during SCLM metasomatism that led to a transformation from garnet peridotite to clinopyroxene-phlogopite rocks and the crystallisation of phlogopite and high-Cr clinopyroxene megacrysts before the generation of host-kimberlite magmas. One of the possible processes to generate low-Ti-Cr phlogopite is via the replacement of garnet during its interaction with a metasomatic agent enriched in K and H2O. Rb-Sr isotopic data indicates that the metasomatic agent had a contribution of more radiogenic source than the host-kimberlite magma. Compared with peridotite xenoliths, eclogite xenoliths feature low-Ti phlogopites that are depleted in Cr2O3 despite a wider range of TiO2 concentrations. The presence of phlogopite in eclogite xenoliths indicates that metasomatic processes affected peridotite as well as eclogite within the SCLM beneath the Grib kimberlite. Phl2 has high Ti and Cr concentrations (TiO2 > 2 wt.%, Cr2O3 > 1 wt.% and Mg# = 100 × Mg/(Mg + Fe) < 92) and compositionally overlaps with phlogopite from polymict breccia xenoliths that occur in global kimberlite formations. These phlogopites are the product of kimberlitic magma and mantle rock interaction at mantle depths where Phl2 overgrew Phl1 grains or crystallized directly from stalled batches of kimberlitic magmas. Megacrysts, most macrocrysts and microcrysts are disintegrated phlogopite fragments from metasomatised peridotite and eclogite xenoliths. Fine phlogopite flakes within kimberlite groundmass represent mixing of high-Ti-Cr phlogopite antecrysts and high-Ti and low-Cr kimberlitic phlogopite with high Al and Ba contents that may have formed individual grains or overgrown antecrysts. Based on the results of this study, we propose a schematic model of SCLM metasomatism involving phlogopite crystallization, megacryst formation, and genesis of kimberlite magmas as recorded by the Grib pipe.
Contributions to Mineralogy and Petrology, Vol. 176, 12,
Russia, Arlangelsk
deposit - Grib
Abstract: To provide new insights into the interaction of ultramafic alkaline melts with the subcontinental lithospheric mantle, we present results of a petrographical-mineralogical study of ilmenite-bearing mantle xenoliths from the Grib kimberlite, Archangelsk, Russia along with results from reaction experiments between harzburgite and Fe-Ti bearing carbonate-silicate melts similar to aillikite. The compositions of orthopyroxene, ilmenite and garnet from our mantle xenoliths are similar to compositions of minerals of the low-Cr megacryst suite from different kimberlite occurrences worldwide including the Grib kimberlite as well as minerals from sheared lherzolite xenoliths captured by the Grib kimberlite. This suggests that ilmenite-bearing xenoliths, megacrysts, and sheared lherzolite xenoliths could have a common origin and/or formed under similar conditions. The reaction experiments were performed at 4 GPa and 1200 °C with varying proportions of aillikite (0, 10, and 50 wt%) that reacted with harzburgite. The experimental runs with 10% and 50% aillikite resulted in two layers within the capsule, with an ilmenite-bearing reaction zone at the contact between aillikite and harzburgite, and an ilmenite-free zone characterized by higher garnet and clinopyroxene abundances. An increase of aillikite melt is directly correlated with increasing TiO2 and decreasing Cr2O3 contents and Mg# values in the mineral phases, most significantly for pyroxenes. Overall, the experiments produce a chemical gradation of minerals from Cr-rich (Fe-Ti-poor) to Cr-poor (Fe-Ti-rich) which is strikingly similar to the chemical gradation observed in minerals from natural mantle-derived xenoliths from kimberlites. In summary, comparison of our experimental data with natural samples indicates possible links between the generation of megacrysts and Ti-rich metasomatism of the lithospheric mantle by ultramafic alkaline (aillikite-related) melts and their possible evolution towards kimberlites. Our results illustrate the importance of melt-rock ratios in generating the mineralogical and chemical diversity in mantle xenolith suites.
Doklady Earth Sciences, Vol. 465, 1, pp. 1135-1138.
Russia
Deposit - Kimozero
Abstract: Geological and structural mapping of Paleoproterozoic Kimozero kimberlite with account for lithological facies and geochemical specialization provides evidence for the multiphase structure of the kimberlite pipe, which underwent fragmentation as a result of shear–faulting deformations. Two geochemical types of kimberlite (magnesium and carbonate) are distinguished.
Abstract: Here we present major and trace element data for garnet and clinopyroxene from mantle-derived peridotite xenoliths of the Grib kimberlite, the Arkhangelsk diamond province, Russia, and provide new insights into the metasomatic processes that occur within the subcontinental lithospheric mantle (SCLM) during the kimberlite generation and ascent. The mantle xenoliths examined in this study are both coarse and sheared garnet peridotites and consist of olivine, orthopyroxene, clinopyroxene, garnet with minor ilmenite, magnetite, and Cr-spinel. Based on garnet and clinopyroxene composition, two groups of peridotite are recognized. One group contains high-Ti, light rare earth elements (LREE) enriched garnets and low-Mg# clinopyroxenes with low (La/Sm)n (C1 chondrite-normalized) values. This mineral assemblage was in equilibrium with a high-temperature carbonate-silicate metasomatic agent, presumably, a protokimberlite melt. Pressure-temperature (P-T) estimates (T = 1220 °C and P = 70 kbar) suggest that this metasomatic event occurred at the base of the SCLM. Another group contains low-Ti garnet with normal to sinusoidal rare earth elements (REE) distribution patterns and high-Mg# clinopyroxenes with wide range of (La/Sm)n values. The geochemical equilibrium between garnet and clinopyroxene coupled with their REE composition indicates that peridotite mantle experienced metasomatic transformation by injection of a low-Ti (after crystallizations of the ilmenite megacrysts) kimberlite melt that subsequently percolated through a refractory mantle column. Peridotites of this group show a wide range of P-T estimates (T = 730-1070 °C and P = 22-44 kbar). It is suggested that evolution of a kimberlite magma from REE-enriched carbonate-bearing to carbonate-rich ultramafic silicate compositions with lower REE occurs during the ascent and interaction with a surrounding lithospheric mantle, and this process leads to metasomatic modification of the SCLM with formation of both high and low-Ti garnets and clinopyroxene widely varying in Mg# and (La/Sm)n values.
Abstract: The paper reports detailed data on phlogopite from kimberlite of three facies types in the Arkhangelsk Diamondiferous Province (ADP): (i) massive magmatic kimberlite (Ermakovskaya-7 Pipe), (ii) transitional type between massive volcaniclastic and magmatic kimberlite (Grib Pipe), and (iii) volcanic kimberlite (Karpinskii-1 and Karpinskii-2 pipes). Kimberlite from the Ermakovskaya-7 Pipe contains only groundmass phlogopite. Kimberlite from the Grib Pipe contains a number of phlogopite populations: megacrysts, macrocrysts, matrix phlogopite, and this mineral in xenoliths. Phlogopite macrocrysts and matrix phlogopite define a single compositional trend reflecting the evolution of the kimberlite melt. The composition points of phlogopite from the xenoliths lie on a single crystallization trend, i.e., the mineral also crystallized from kimberlite melt, which likely actively metasomatized the host rocks from which the xenoliths were captured. Phlogopite from volcaniclastic kimberlite from the Karpinskii-1 and Karpinskii-2 pipes does not show either any clearly distinct petrographic setting or compositional differentiation. The kimberlite was dated by the Rb-Sr technique on phlogopite and additionally by the 40Ar/39Ar method. Because it is highly probable that phlogopite from all pipes crystallized from kimberlite melt, the crystallization age of the kimberlite can be defined as 376 ± 3 Ma for the Grib Pipe, 380 ± 2 Ma for the Karpinskii-1 pipe, 375 ± 2 Ma for the Karpinskii-2 Pipe, and 377 ± 0.4 Ma for the Ermakovskaya-7 Pipe. The age of the pipes coincides within the error and suggests that the melts of the pipes were emplaced almost simultaneously. Our geochronologic data on kimberlite emplacement in ADP lie within the range of 380 ± 2 to 375 ± Ma and coincide with most age values for Devonian alkaline-ultramafic complexes in the Kola Province: 379 ± 5 Ma; Arzamastsev and Wu, 2014). These data indicate that the kimberlite was formed during the early evolution of the Kola Province, when alkaline-ultramafic complexes (including those with carbonatite) were emplaced.
Abstract: The results of geochronological, mineralogical, petrographical, and geochemical study of the Ilbokich ultramafic lamprophyre are reported. The specific features in the mineral and chemical compositions of the studied ultramafic lamprophyre indicate that it can be regarded as a variety similar to aillikite, while other differences dominated by K-feldspar can be referred to damtjernite. According to Rb-Sr analysis, ultramafic lamprophyre dikes intruded at the turn of the Early and Middle Devonian, about 392 Ma ago. This directly proves the existence of Early Paleozoic alkali-ultramafic magmatism in the northern part of the southwest Siberian Platform. A finding of Devonian alkali-ultramafic lamprophyre is of dual predictive importance. On the one hand, it is indicative of the low probability of finding large diamond-bearing deposits in close association with aillikite. On the other hand, it can be indicative of a possible large Devonian diamond province in the studied territory, where diamondiferous kimberlite is structurally separated from aillikite.
Abstract: The paper reports detailed data on phlogopite from kimberlite of three facies types in the Arkhangelsk Diamondiferous Province (ADP): (i) massive magmatic kimberlite (Ermakovskaya-7 Pipe), (ii) transitional type between massive volcaniclastic and magmatic kimberlite (Grib Pipe), and (iii) volcanic kimberlite (Karpinskii-1 and Karpinskii-2 pipes). Kimberlite from the Ermakovskaya-7 Pipe contains only groundmass phlogopite. Kimberlite from the Grib Pipe contains a number of phlogopite populations: megacrysts, macrocrysts, matrix phlogopite, and this mineral in xenoliths. Phlogopite macrocrysts and matrix phlogopite define a single compositional trend reflecting the evolution of the kimberlite melt. The composition points of phlogopite from the xenoliths lie on a single crystallization trend, i.e., the mineral also crystallized from kimberlite melt, which likely actively metasomatized the host rocks from which the xenoliths were captured. Phlogopite from volcaniclastic kimberlite from the Karpinskii-1 and Karpinskii-2 pipes does not show either any clearly distinct petrographic setting or compositional differentiation. The kimberlite was dated by the Rb–Sr technique on phlogopite and additionally by the 40Ar/39Ar method. Because it is highly probable that phlogopite from all pipes crystallized from kimberlite melt, the crystallization age of the kimberlite can be defined as 376 ± 3 Ma for the Grib Pipe, 380 ± 2 Ma for the Karpinskii-1 pipe, 375 ± 2 Ma for the Karpinskii-2 Pipe, and 377 ± 0.4 Ma for the Ermakovskaya-7 Pipe. The age of the pipes coincides within the error and suggests that the melts of the pipes were emplaced almost simultaneously. Our geochronologic data on kimberlite emplacement in ADP lie within the range of 380 ± 2 to 375 ± Ma and coincide with most age values for Devonian alkaline–ultramafic complexes in the Kola Province: 379 ± 5 Ma; Arzamastsev and Wu, 2014). These data indicate that the kimberlite was formed during the early evolution of the Kola Province, when alkaline–ultramafic complexes (including those with carbonatite) were emplaced.
Abstract: The paper presents data on the composition of olivine macrocrysts from two Devonian kimberlite pipes in the Arkhangelsk diamond province: the Grib pipe (whose kimberlite belongs to type I) and Pionerskaya pipe (whose kimberlite is of type II, i.e., orangeite). The dominant olivine macrocrysts in kimberlites from the two pipes significantly differ in geochemical and isotopic parameters. Olivine macrocrysts in kimberlite from the Grib pipe are dominated by magnesian (Mg# = 0.92–0.93), Ti-poor (Ti < 70 ppm) olivine possessing low Ti/Na (0.05–0.23), Zr/Nb (0.28–0.80), and Zn/Cu (3–20) ratios and low Li concentrations (1.2–2.0 ppm), and the oxygen isotopic composition of this olivine ?18O = 5.64‰ is higher than that of olivine in mantle peridotites (?18O = 5.18 ± 0.28‰). Olivine macrocrysts in kimberlite from the Pionerskaya pipe are dominated by varieties with broadly varying Mg# = 0.90–0.93, high Ti concentrations (100–300 ppm), high ratios Ti/Na (0.90–2.39), Zr/Nb (0.31–1.96), and Zn/Cu (12–56), elevated Li concentrations (1.9–3.4 ppm), and oxygen isotopic composition ?18O = 5.34‰ corresponding to that of olivine in mantle peridotites. The geochemical and isotopic traits of low-Ti olivine macrocrysts from the Grib pipe are interpreted as evidence that the olivine interacted with carbonate-rich melts/fluids. This conclusion is consistent with the geochemical parameters of model melt in equilibrium with the low-Ti olivine that are similar to those of deep carbonatite melts. Our calculations indicate that the variations in the ?18O of the olivine relative the “mantle range” (toward both higher and lower values) can be fairly significant: from 4 to 7‰ depending on the composition of the carbonate fluid. These variations were formed at interaction with carbonate fluid, whose ?18O values do not extend outside the range typical of mantle carbonates. The geochemical parameters of high-Ti olivine macrocrysts from the Grib pipe suggest that their origin was controlled by the silicate (water–silicate) component. This olivine is characterized by a zoned Ti distribution, with the configuration of this distribution between the cores of the crystals and their outer zones showing that the zoning of the cores and outer zones is independent and was produced during two episodes of reaction interaction between the olivine and melt/fluid. The younger episode (when the outer zone was formed) likely involved interaction with kimberlite melt. The transformation of the composition of the cores during the older episode may have been of metasomatic nature, as follows from the fact that the composition varies from grain to grain. The metasomatic episode most likely occurred shortly before the kimberlite melt was emplaced and was related to the partial melting of pyroxenite source material.
Abstract: Here we present major (EMPA) and trace element (SIMS, LA-ICP-MS) data for garnet and clinopyroxene from mantlederived xenoliths of coarse and sheared garnet peridotite [1, 2] and clinopyroxene-phlogopite metasomatic rocks from the Grib kimberlite, the Arkhangelsk diamond province, Russia, and provide new insights into the metasomatic processes that occur within the subcontinental lithospheric mantle (SCLM) during the kimberlite melts generation and ascent. The obtained data allowed us to reconstruct the following sequence of metasomatic events associated with the generation of the Grib kimberlite: 1. Ascent of high-temperature asthenospheric or mantle plume material resulted in a partial melting of a carbonated peridotite and led to the generation of high-temperature REEenriched proto-kimberlite melts containing significant amounts of carbonate, Fe-Ti and K-H2O. These protokimberlite melts started to interact with the surrounding mantle rocks during its evolution and ascent, and caused metasomatic modification of both coarse and sheared peridotites at the base of SCLM (T and P estimates are 1220°C and 70 kbar). 2. Further evolution of proto-kimberlite melts during the ascent and the interaction with the surrounding mantle (e.g. mantle-rock assimilation and/or percolative fractional crystallization) led to changes in the kimberlite composition from REE-enriched carbonate-dominated to carbonate-rich ultramafic silicate magmas with lower REE contents. 3. During the ascent, carbonate-rich ultramafic silicate kimberlite melts progressively metasomatised sorrounding SCLM from garnet-phlogopite peridotite through garnetphlogopite peridotite to clinopyroxene-phlogopite rocks under T and P estimated as 830°C and 40 kbar. At this stage, the fractionated of Fe-Ti-bearing megacrysts occurred.
Abstract: To provide new insights into the origin of megacrysts and metasomatism of the subcontinental lithospheric mantle (SCLM), we present a detailed petrographic and geochemical investigation of clinopyroxene-phlogopite xenoliths and clinopyroxene megacrysts from the Grib kimberlite (Arkhangelsk diamond province, Russia). Clinopyroxene megacrysts and clinopyroxene from clinopyroxene-phlogopite xenoliths have similar petrography, major and trace element compositions, and are therefore classified as Cr-rich megacrysts. Geothermobarometry suggests that Cr-rich clinopyroxenes originate from within the SCLM (3.6-4.7 GPa and 764-922 °C). Phlogopite from clinopyroxene-phlogopite xenoliths have low-Ti and -Cr compositions that overlaps with phlogopite megacrysts from the Grib kimberlite. The clinopyroxene-phlogopite rocks within the SCLM are the main source for Cr-rich clinopyroxene and low-Ti phlogopite megacrysts in the Grib kimberlite matrix. Trace element compositions of studied Cr-rich clinopyroxenes have similar geochemical features to clinopyroxenes megacrysts occurrences worldwide and overlap with clinopyroxenes from phlogopite-garnet peridotite xenoliths from the Grib kimberlite. The strong depletion in Ti, Nb, Ta and to a lesser extent in Zr and Hf in clinopyroxene reflects equilibrium with Ti-oxides, such as ilmenite. The clinopyroxene-phlogopite xenoliths could be the final product of metasomatism of garnet peridotites within the SCLM beneath the Grib kimberlite. The calculated equilibrium of clinopyroxene melt compositions suggests that the metasomatic agents were derived from silicate-bearing kimberlite melts. The presence of veinlets infilled with kimberlitic mineral assemblages in clinopyroxene grains suggests that the clinopyroxene-phlogopite rocks experienced intense interactions with kimberlite melt after their formation, but before their entrainment into the host kimberlite magma. This interaction resulted in the formation of high-Ti and -Cr phlogopite and high-Ti clinopyroxene rims, zones and grains with spongy textures. Finally, we propose the sequence of metasomatic events that occurred in the SCLM and the subsequent formation of the Grib kimberlite.
Doklady Earth Sciences, Vol. 477, 1, pp. 1291-1294.
Russia
kimberlite, alnoite, carbonatite
Abstract: The results of geochemical typification of kimberlites and related rocks (alneites and carbonatites) of the North Anabar region are presented with consideration of the geochemical specification of their source and estimation of their potential for diamonds. The content of representative trace elements indicates the predominant contribution of an asthenospheric component (kimberlites and carbonatites) in their source, with a subordinate contribution of vein metasomatic formations containing Cr-diopside and ilmenite. A significant contribution of water-bearing potassium metasomatic parageneses is not recognized. According to the complex of geochemical data, the studied rocks are not industrially diamondiferous.
Abstract: A classification suggested for alkaline ultramafic rocks of the Ary-Mastakh and Staraya Rechka fields, Northern Anabar Shield, is based on the modal mineralogical composition of the rocks and the chemical compositions of their rock-forming and accessory minerals. Within the framework of this classification, the rocks are indentified as orangeite and alkaline ultramafic lamprophyres: aillikite and damtjernite. To estimate how much contamination with the host rocks has modified their composition when the diatremes were formed, the pyroclastic rocks were studied that abound in xenogenic material (which is rich in SiO2, Al2O3, K2O, Rb, Pb, and occasionally also Ba) at relatively low (La/Yb)PM, (La/Sm)PM, and not as much also (Sm/Zr)PM and (La/Nb)PM ratios. The isotopic composition of the rocks suggests that the very first melt portions were of asthenospheric nature. The distribution of trace elements and REE indicates that one of the leading factors that controlled the diversity of the mineralogical composition of the rocks and the broad variations in their isotopic-geochemical and geochemical characteristics was asthenosphere-lithosphere interaction when the melts of the alkaline ultramafic rocks were derived. The melting processes involved metasomatic vein-hosted assemblages of carbonate and potassic hydrous composition (of the MARID type). The alkaline ultramafic rocks whose geochemistry reflects the contributions of enriched vein assemblages to the lithospheric source material, occur in the northern Anabar Shield closer to the boundary between the Khapchan and Daldyn terranes. The evolution of the aillikite melts during their ascent through the lithospheric mantle could give rise to damtjernite generation and was associated with the separation of a C-H-O fluid phase. Our data allowed us to distinguish the evolutionary episodes of the magma-generating zone during the origin of the Triassic alkaline ultramafic rocks in the northern Anabar Shield.
Contributions to Mineralogy and Petrology, 10.1007/ s00410-018- 1480-3, 27p.
Russia, Siberia
kimberlite
Abstract: We studied olivines from the Devonian pre-trap (the Ilbokich occurrence) and the Triassic post-trap (the Chadobets occurrence) carbonate-rich ultramafic lamprophyres (UMLs) in the southwestern portion of the Siberian craton. On the basis of detailed investigations of major, minor, and trace-element distributions, we have reconstructed the main processes that control the origins of these olivines. These include fractional crystallisation from melt, assimilation, and fractional crystallisation processes with orthopyroxene assimilation, melt-reaction diffusive re-equilibration, alkali enrichment, and CO2 degassing of the melt. Furthermore, we inferred the composition of the sources of the primary UML melt and their possible correlations with proto-kimberlitic melts, as well as the influence of the Triassic Siberian plume on the composition of the lithospheric mantle. The main differences between olivines from the Ilbokich and the Chadobets aillikites were that the olivines from the former had more magnesium-rich cores (Mg# = 89.2 ± 0.2), had Mg- and Cr-rich transition zones (Mg# = 89.7 ± 0.2 and 300-500 ppm Cr), had lower Ni (up to 3100 ppm) and Li (1.4-1.5 ppm), and had higher B (0.8-2.6 ppm) contents, all at higher Fo values (90-86), relative to the olivines from the latter (Mg# = 88-75; 200-300 ppm Cr; up to 3400 ppm Ni; 1.4-2.4 ppm Li; 0.4-2.2 ppm B). The Siberian aillikite sources contained a significant amount of metasomatic material. Phlogopite-rich MARID-type veins provided the likely metasomatic component in the pre-trap Devonian Ilbokich aillikite source, whereas the Triassic Chadobets aillikitic post-trap melts were derived from a source with a significant carbonate component. A comparison of UML olivines with olivines from the pre-trap and post-trap Siberian kimberlites shows a striking similarity. This suggests that the carbonate component in the aillikitic source could have been produced by evolved kimberlite melts. The differences in the lithospheric metasomatic component that contributed to pre-trap and post-trap aillikitic melts can be interpreted as reflections of the thermal impact of the Siberian Traps, which reduced phlogopite-bearing metasomes within the southwestern Siberian sub-continental lithospheric mantle.
Abstract: To provide new insights into the origin and evolution of ultramafic lamprophyres (UMLs) and their mantle source, we examined two UML (aillikite and damtjernite) occurrences of different ages in the western portion of the Siberian Craton (Ilbokich and Chadobets). New age, mineral and rock geochemistry, along with Sr-Nd-Pb-C-O isotope data was obtained. Our new 206Pb/238U perovskite age (399 ± 4 Ma) confirms the previously published Early Devonian age of the Ilbokich aillikite. RbSr isochron and 40Ar/39Ar dating yielded a Middle Triassic age (243 ± 3 Ma and 241 ± 1 Ma, respectively) for the Chadobets aillikites, indicating post-Trap emplacement of these rocks. Both UMLs are characterized by incompatible elements, including light rare earth element (LREE) enrichments (La is up to ×200 chondrite concentration), and strong fractionation of REEs ((La/Yb)n: 33-84). Despite the close geochemical affinity of both UMLs, the Nd isotopic compositions of aillikites, as well as the Pb isotopic composition of Chadobets and Ilbokich UMLs, do not overlap and are distinctly different from each other. The initial Sr and Nd isotopic compositions of the Ilbokich UMLs fall in within a narrow 87Sr/86Sr0 range (0.7032-0.7042) and ?Nd(T) (4.03-3.97). Chadobets UMLs have a similar Sr isotopic signature (87Sr/86Sr0: 0.7031-0.7043) and a more depleted Nd isotopic signature (?Nd(T) 4.09-5.08). The initial Pb isotope compositions of the Chadobets UMLs are moderately radiogenic, ranging between 206Pb/204Pb = 18.4-19.0, 208Pb/204Pb = 38.3-38.8, and are characterized by a narrow 207Pb/204Pb ratio between 15.5 and 15.6. The Ilbokich Pb isotope compositions are less variable and range between 206Pb/204Pb = 18.0-18.4, 208Pb/204Pb = 37.8-38.4 and 207Pb/204Pb ratios between 15.5 and 15.6. The oxygen isotopic composition of carbonate from both UMLs is characterized by highly variable ?18O values from +12.1 and up to +20.5‰ (SMOW). The isotopic composition of ?13C values range from ?1.3‰ to ?7.1. Based on the minor impact of crustal contamination in both aillikites, it is inferred that their radiogenic isotope composition reflects a mantle source signature. The mantle source of the Chadobets aillikites is likely to include carbonatitic magma as a metasomatic agent. In contrast, phlogopite-rich metasomes within the lithospheric mantle could have contributed more significantly to the Ilbokich aillikites. These metasomes could be formed during the Caledonian orogeny, which did not only affect the southwestern boundary of the Siberian Craton, but also expanded to the craton interior. This study provides additional support for the evolution of the south-western portion of the Siberian SCLM, ranging from mantle containing phlogopite enrichment domains during the Early Devonian to hydrous-phase reduced mantle in the Triassic due to the thermal impact of the Siberian Traps.
Abstract: To provide new insights into the origin and evolution of ultramafic lamprophyres (UMLs) and their mantle source, we examined two UML (aillikite and damtjernite) occurrences of different ages in the western portion of the Siberian Craton (Ilbokich and Chadobets). New age, mineral and rock geochemistry, along with Sr-Nd-Pb-C-O isotope data was obtained. Our new 206Pb/238U perovskite age (399 ± 4 Ma) confirms the previously published Early Devonian age of the Ilbokich aillikite. RbSr isochron and 40Ar/39Ar dating yielded a Middle Triassic age (243 ± 3 Ma and 241 ± 1 Ma, respectively) for the Chadobets aillikites, indicating post-Trap emplacement of these rocks. Both UMLs are characterized by incompatible elements, including light rare earth element (LREE) enrichments (La is up to ×200 chondrite concentration), and strong fractionation of REEs ((La/Yb)n: 33-84). Despite the close geochemical affinity of both UMLs, the Nd isotopic compositions of aillikites, as well as the Pb isotopic composition of Chadobets and Ilbokich UMLs, do not overlap and are distinctly different from each other. The initial Sr and Nd isotopic compositions of the Ilbokich UMLs fall in within a narrow 87Sr/86Sr0 range (0.7032-0.7042) and ?Nd(T) (4.03-3.97). Chadobets UMLs have a similar Sr isotopic signature (87Sr/86Sr0: 0.7031-0.7043) and a more depleted Nd isotopic signature (?Nd(T) 4.09-5.08). The initial Pb isotope compositions of the Chadobets UMLs are moderately radiogenic, ranging between 206Pb/204Pb = 18.4-19.0, 208Pb/204Pb = 38.3-38.8, and are characterized by a narrow 207Pb/204Pb ratio between 15.5 and 15.6. The Ilbokich Pb isotope compositions are less variable and range between 206Pb/204Pb = 18.0-18.4, 208Pb/204Pb = 37.8-38.4 and 207Pb/204Pb ratios between 15.5 and 15.6. The oxygen isotopic composition of carbonate from both UMLs is characterized by highly variable ?18O values from +12.1 and up to +20.5‰ (SMOW). The isotopic composition of ?13C values range from ?1.3‰ to ?7.1. Based on the minor impact of crustal contamination in both aillikites, it is inferred that their radiogenic isotope composition reflects a mantle source signature. The mantle source of the Chadobets aillikites is likely to include carbonatitic magma as a metasomatic agent. In contrast, phlogopite-rich metasomes within the lithospheric mantle could have contributed more significantly to the Ilbokich aillikites. These metasomes could be formed during the Caledonian orogeny, which did not only affect the southwestern boundary of the Siberian Craton, but also expanded to the craton interior. This study provides additional support for the evolution of the south-western portion of the Siberian SCLM, ranging from mantle containing phlogopite enrichment domains during the Early Devonian to hydrous-phase reduced mantle in the Triassic due to the thermal impact of the Siberian Traps.
Abstract: To provide new constraints on the evolution of ultramafic lamprophyre melts and relation to kimberlites, we examined monomineralic and primary multiphase melt inclusions in rock-forming minerals within damtjernite from Viktoria pipe, Anabar region, Siberia craton, Russia. The studied samples are relatively unaltered nepheline-bearing, carbonate-poor damtjernite with a significant amount of monticellite in the groundmass and as a replacement of olivine. Studied inclusions hosted by groundmass monticellite, magnesian ulvöspinel-magnetite and perovskite. Monomineralic inclusions sized up to 10 ?m are round-toeuhedral in shape and are comprised of monticellite, spinel, perovskite and nepheline. Multiphase melt inclusions sized up to 10-15 ?m have rounded to elongate and amoeboid shapes. These inclusions are heterogeneous in composition and consist of perovskite, spinel group minerals, apatite (including F- and Sr-apatite), feldspathoids, multiphase alkali (Na, K) carbonate and chloride (sylvite/halite), rare K-Naand Ba-sulfates, phlogopite and baddeleyite. Despite the lack of carbonate phases in studied rocks, the composition of multiphase inclusions indicates that lamprophyre melts contained carbonate or carbonate/chlorite components. The CO2 degassing is consistent with the reaction between olivine and carbonate-bearing melt led to decarbonation reaction and generation of montichellite, as described in [1]. The composition of multiphase inclusions within minerals from lamprophyres is close to the composition of multiphase inclusions within olivine, spinel, monticellite, perovskite from kimberlites, thus indicating possible genetic links between parental melts of ultramafic lamprophyre and kimberlite.
Abstract: To provide new insights into the origin and evolution of kimberlitic magmas with different diamond concentrations from the Arkhangelsk diamond province in northwestern Russia, we examined the major-and trace-element compositions of ilmenite from diamondiferous kimberlite of the Grib pipe and diamond barren kimberlites from the Kepino cluster (Stepnaya and TsNIGRI-Arkhangelskaya pipes). Ilmenite from diamond-barren kimberlites shows lower Mg, Ti, Cr, Ni and Cu concentrations with increase in both Fe 3+ and Fe 2+ and Nb, Ta, Zr, Hf, Zn and V concentrations. The main differences between kimberlites with different diamond contents are the Nb and Zr concentrations and their correlation patterns with Mg and Cr concentrations. Ilmenite from the Grib kimberlite has Zr concentrations <110 ppm, whereas ilmenite from the Kepino kimberlites has Zr concentrations >300 ppm. Ilmenite crystallisation within the Grib kimberlite occurred under increasing oxygen fugacity (fO 2), which may reflect assimilation of mantle peridotite by the kimberlitic magmas. Ilmenite from the Kepino kimberlites suggests its crystallisation under constant fO 2 , with the ilmenite composition being controlled by processes of fractional crystallisation of megacrystic minerals. These assumptions were confirmed with assimilation-fractional crystallisation calculations. On the basis of obtained data, we developed a model for the evolution of the kimberlitic magmas for both diamon-diferous and barren kimberlites. The diamond-bearing kimberlitic magmas were generated under intense interaction of kimberlitic magmas with the surrounding lithospheric mantle. It may be that during early modification of the lithospheric mantle by kimberlitic magmas as well as with kimberlitic magmas' local stretching and swift ascent, the capture of the mantle xenoliths was favoured over the crystallisation of phenocrysts. The formation of barren kimberlitic magmas may have occurred when the lithospheric mantle in the vicinity of ascending magmas was already geochemically equilibrated with them. It also is possible that the magma's ascent slowed under conditions of dominantly compressive stresses with crystallisation of olivine and other megacrystic phases.
Mineralogy and Petrology, Vol. 114, 4, pp. 272-288. pdf
Russia, Archangel
deposit - Grib
Abstract: To provide new insights into the origin of garnet megacrysts and evolution of kimberlite melts, we studied in detail the polymineralic and monomineralic inclusions and their host garnets from the Grib kimberlite (Arkhangelsk diamond province, Russia). Low-Cr and high-Cr garnet megacrysts and eclogitic garnets contain abundant polymineralic and rare monomineralic inclusions. Monomineralic inclusions presented by clinopyroxene, ilmenite, olivine replaced by serpentine, were found exclusively within the low-Cr megacrysts. The composition of clinopyroxene exhibits geochemical equilibrium with the host garnet, indicating its primary origin during the formation of the megacryst assemblage. The low-Cr garnet–clinopyroxene mineral assemblage formed as a result of high-temperature, melt-associated mantle metasomatism by failed kimberlite within the lithospheric mantle (T?=?1150 °C and P?=?5.5 GPa). Polymineralic inclusions are characterised by a silicate or silicate-sulphate matrix. The central part of the silicate inclusions is filled by serpentine and contains ilmenite, spinel, perovskite, calcite and apatite. At the contact with host garnets, phlogopite, spinel and amphibole occur as reaction minerals. Composition of spinel and other minerals within inclusions with silicate matrix suggests that kimberlite melt was trapped at mantle pressures. Inclusions with silicate matrix were found in all garnets. The matrix of silicate-sulphate inclusions consists of silicate cryptocrystalline phases and sulphate minerals (celestine–barite) and contains calcite grains. The inclusions are distributed in some low-Cr garnet megacrysts and eclogitic garnet. The silicate-sulphate inclusions were crystallised from the late-stage kimberlite melt. Diverse reaction textures are evidences of disequilibrium between the host crystals and polymineralic inclusions and indicate that garnet and the hosted inclusions reacted with the ascending kimberlite melt. The silicate-sulphate inclusions with a thin rim of epidote within eclogitic garnets indicate that a kimberlite melt invaded the garnet and induced partial melting. The studied inclusions allow us to propose three stages of the Grib kimberlite evolution: 1) generation of garnet megacrysts and primary inclusions due to melt metasomatism, 2) reaction of the high-Ti kimberlite melt with garnet megacrysts (including their dissolution) and 3) alteration of the inclusions in garnet after kimberlite ascent.
Abstract: Based on a detailed petrographic investigation and geological observations of the Paleoproterozoic Kimozero kimberlite (Karelia, Russia), we present a new model of kimberlite pipe with multiphase and mono-crater structure. We recognised volcanoclastic and coherent kimberlite series that filled the inner and outer zones of the kimberlite crater. The multiphase structure, emplacement style, petrography and reconstructed size of the Kimozero kimberlite correspond to Phanerozoic kimberlite pipes.
Abstract: To provide new insights into the origin and evolution of kimberlitic magmas with different diamond concentrations from the Arkhangelsk diamond province in north-western Russia, we examined the major- and trace-element compositions of ilmenite from diamondiferous kimberlite of the Grib pipe and diamond-barren kimberlites from the Kepino cluster (Stepnaya and TsNIGRI-Arkhangelskaya pipes). Ilmenite from diamond-barren kimberlites shows lower Mg, Ti, Cr, Ni and Cu concentrations with increase in both Fe3+ and Fe2+ and Nb, Ta, Zr, Hf, Zn and V concentrations. The main differences between kimberlites with different diamond contents are the Nb and Zr concentrations and their correlation patterns with Mg and Cr concentrations. Ilmenite from the Grib kimberlite has Zr concentrations <110 ppm, whereas ilmenite from the Kepino kimberlites has Zr concentrations >300 ppm. Ilmenite crystallisation within the Grib kimberlite occurred under increasing oxygen fugacity (fO2), which may reflect assimilation of mantle peridotite by the kimberlitic magmas. Ilmenite from the Kepino kimberlites suggests its crystallisation under constant fO2, with the ilmenite composition being controlled by processes of fractional crystallisation of megacrystic minerals. These assumptions were confirmed with assimilation-fractional crystallisation calculations. On the basis of obtained data, we developed a model for the evolution of the kimberlitic magmas for both diamondiferous and barren kimberlites. The diamond-bearing kimberlitic magmas were generated under intense interaction of kimberlitic magmas with the surrounding lithospheric mantle. It may be that during early modification of the lithospheric mantle by kimberlitic magmas as well as with kimberlitic magmas’ local stretching and swift ascent, the capture of the mantle xenoliths was favoured over the crystallisation of phenocrysts. The formation of barren kimberlitic magmas may have occurred when the lithospheric mantle in the vicinity of ascending magmas was already geochemically equilibrated with them. It also is possible that the magma’s ascent slowed under conditions of dominantly compressive stresses with crystallisation of olivine and other megacrystic phases.
Abstract: To provide new insights into the type and extent of mantle metasomatism in the subcratonic lithospheric mantle, we examined the Sr-Nd-O isotopic compositions of orthopyroxene, clinopyroxene, garnet, ilmenite and phlogopite from sheared garnet lherzolite, granular garnet harzburgites and lherzolites and clinopyroxene-phlogopite rocks from the Grib kimberlite in the Arkhangelsk diamond province in northwestern Russia. Clinopyroxene and orthopyroxene from sheared garnet lherzolite initially have a close value of 87Sr/86Sr(t) (~0.7034) and close weak positive ?Nd. Orthopyroxene and clinopyroxene are in oxygen isotope equilibrium with coexisting olivine. Clinopyroxene from a garnet harzburgite has a low 87Sr/86Sr(t) isotope ratio of 0.70266. Clinopyroxene from granular garnet lherzolites has a relatively narrow variation in 87Sr/86Sr(t) (0.70456-0.70582) and considerably larger variations in ?Nd (?4.3???+1.0) isotope ratios. Garnet displays elevated initial 87Sr/86Sr(t) values (0.70540-0.70633). Ilmenite shows a narrow range in 87Sr/86Sr(t) (0.70497-0.70522) coupled with ?Nd values of +0.4 and +3.5. These isotopic data suggest granular garnet lherzolite of mantle metasomatism took place during the interaction of kimberlite melts with SCLM that contained mica-amphibole-rutile-ilmenite-diopside (MARID)-type metasomes. Clinopyroxenes from clinopyroxene-phlogopite (phlogopite wehrlite) xenoliths display a broader range in 87Sr/86Sr(t) (0.70486-0.70813) that is significantly higher than the kimberlite values and a circa-chondritic ?Nd (?0.1 ??+1.3) with a restricted ?18O range (5.11‰-5.33‰). More radiogenic Sr isotopic composition decoupled from Nd isotopes could have been induced by metasomatic melt/fluid related to a subducted material. The isotopic compositions of mantle minerals preserve Sr-Nd isotopic evidence of pre-kimberlite metasomatic events that were probably due to incomplete reequilibration with ultramafic carbonated melt. Based on mineral pairs Rb-Sr isochrons and a clinopyroxene-based Sm-Nd errochron, these mantle metasomatic events correspond to ~550-600?Ma and ~1200?Ma episodes of magmatic-thermal activity.
Abstract: Major and trace element compositions of garnet, clinopyroxene, orthopyroxene, phlogopite, and ilmenite from garnet peridotite, ilmenite-bearing peridotite (dunites), and clinopyroxene-phlogopite xenoliths, as well as megacrysts of these minerals from the Grib kimberlite, Arkhangelsk diamond province, Russia, have been analyzed. These data are used to propose a model for mantle metasomatism of lithospheric mantle by kimberlite melts, including their generation and evolution, geochemical enrichment of depleted lithosphere mantle, and formation of megacrystic assemblage. The lithospheric mantle beneath the Arkhangelsk diamond province, from its base (depth ~180-210 km) to a depth of ~100-120 km (corresponding to a pressure of 3.5 GPa) experienced extensive metasomatism along the main kimberlite melt channel. Petrography of the peridotite xenoliths indicates a progressive refertilization of depleted harzburgite into garnet lherzolite, phlogopite-garnet wehrlite, and clinopyroxene-phlogopite rocks. Metasomatic refertilization occurred shortly before the capture of these xenoliths by the kimberlite melt. The model melt compositions calculated from garnet-clinopyroxene equilibria in different types of xenoliths and megacrysts show that alkaline-carbonate-ultramafic kimberlite melt acted as a metasomatic agent in the sheared peridotite at the base of the lithospheric mantle. High-Ti garnet and high-Cr clinopyroxene megacrysts in the middle part of the lithospheric mantle, as well as the main volume of garnet lherzolite xenoliths were formed in geochemical equilibrium with the kimberlite melts, which demonstrate an increase of silicate components and fractionation of Fe-Ti phases. The modification could be related to the interaction of ascending carbonate-rich protokimberlite melts with surrounding lithospheric mantle. The similarities in the compositions of garnet, clinopyroxene, phlogopite, and ilmenite megacrysts with minerals of peridotite xenoliths in the Grib kimberlite suggest that these megacrysts are disintegrated fragments of coarsest grained metasomatized garnet lherzolite, ilmenite-bearing peridotite, and clinopyroxene-phlogopite mantle rocks or formed under the same conditions as xenoliths or directly crystallized from metasomatic melts.
Abstract: To provide new insights into the evolution of kimberlitic magmas, we have undertaken a detailed petrographic and mineralogical investigation of highly evolved carbonate-phlogopite-bearing kimberlites of the Kepino cluster, Arkhangelsk kimberlite province, Russia. The Kepino kimberlites are represented by volcanoclastic breccias and massive macrocrystic units within pipes as well as coherent porphyritic kimberlites within sills. The volcanoclastic units from pipes are similar in petrography and mineral composition to archetypal (Group 1) kimberlite, whereas the sills represent evolved kimberlites that exhibit a wide variation in amounts of carbonate and phlogopite. The late-stage evolution of kimberlitic melts involves increasing oxygen fugacity and fluid-phase evolution (forming carbonate segregations by exsolution, etc.). These processes are accompanied by the transformation of primary Al- and Ti-bearing phlogopite toward tetraferriphlogopite and the transition of spinel compositions from magmatic chromite to magnesian ulvöspinel and titanomagnetite. Similar primary kimberlitic melts emplaced as sills and pipes may be transitional to carbonatite melts in the shallow crust. The kimberlitic pipes are characterised by low carbonate amounts that may reflect the fluid degassing process during an explosive emplacement of the pipes. The Kepino kimberlite age, determined as 397.3 ± 1.2 Ma, indicates two episodes of ultramafic alkaline magmatism in the Arkhangelsk province, the first producing non-economic evolved kimberlites of the Kepino cluster and the second producing economic-grade diamondiferous kimberlites.
Abstract: The study reports petrography, bulk major and trace element compositions of lamprophyric Devonian dykes in three areas of the Kola Alkaline Carbonatite Province (N Europe). Dykes in one of these areas, Kandalaksha, are not associated with a massif, while dykes in Kandaguba and Turij Mys occur adjacent (< 5 km) to coeval central multiphase ultramafic alkaline?carbonatitic massifs. Kandalaksha dyke series consists of aillikites - phlogopite carbonatites and monchiquites. Kandaguba dykes range from monchiquites to nephelinites and phonolites; Turij Mys dykes represent alnöites, monchiquites, foidites, turjaites and carbonatites. Some dykes show extreme mineralogical and textural heterogeneity and layering we ascribe to fluid separation and crystal cumulation. Melt evolution of the dykes was modelled with Rhyolite-MELTS and compared with the observed order and products of the crystallization. Our results suggest that the studied rocks were related by fractional crystallization and liquid immiscibility. Primitive melts of aillikites or olivine melanephelinites initially evolved at P = 1.5-0.8 GPa without a SiO2 increase due to abundant clinopyroxene crystallization controlled by the CO2-rich fluid. At 1-1.1 GPa the Turij Mys melts separated immiscible carbonatite melt, which subsequently exsolved late carbonate-rich fluids extremely rich in trace elements. Kandaguba and Turij Mys melts continued to fractionate at lower pressures in the presence of hydrous fluid to the more evolved nephelinite and phonolite melts. The studied dykes highlight the critical role of the parent magma chamber in crystal fractionation and magma diversification. The Kandalaksha dykes may represent a carbonatite - ultramafic lamprophyre association, which fractionated at 45-20 km in narrow dykes on ascent to the surface and could not get more evolved than monchiquite. In contrast, connections of Kandaguba and Turij Mys dykes to their massif magma chambers ensured the sufficient time for fractionation, ascent and a polybaric evolution. This longevity generated more evolved rock types with the higher alkalinity and an immiscible separation of carbonatites.
Doklady Earth Sciences, Vol. 482, 1, pp. 1130-1133.
Russia
deposit - Lake Kimozero
Abstract: Syngenetic and epigenetic ore mineralization was studied in Paleoproterozoic metakimberlites in the area of Kimozero Lake. In the Kimozero structure, redeposited ore mineralization is constrained to fracture and shear zones and consists of Fe-vaesite, Fe-Co-polydymite, millerite, Ni-pyrrhotite, pentlandite, chalcopyrite, Zn-bearing copper, galena, and Ni-pyrite. The composition of this mineralization is analogous to that of syngenetic mineralization in pyroclastic and coherent kimberlite, and its likely source was the kimberlite itself.
Progress in Earth and Planetary Science, Vol. 7, 76 25p. Doi.org/10.1186 /s40645-020-00379-3 pdf
Mantle
water
Abstract: Oceans on Earth are present as a result of dynamic equilibrium between degassing and regassing through the interaction with Earth’s interior. We review mineral physics, geophysical, and geochemical studies related to the global water circulation and conclude that the water content has a peak in the mantle transition zone (MTZ) with a value of 0.1-1 wt% (with large regional variations). When water-rich MTZ materials are transported out of the MTZ, partial melting occurs. Vertical direction of melt migration is determined by the density contrast between the melts and coexisting minerals. Because a density change associated with a phase transformation occurs sharply for a solid but more gradually for a melt, melts formed above the phase transformation depth are generally heavier than solids, whereas melts formed below the transformation depth are lighter than solids. Consequently, hydrous melts formed either above or below the MTZ return to the MTZ, maintaining its high water content. However, the MTZ water content cannot increase without limit. The melt-solid density contrast above the 410 km depends on the temperature. In cooler regions, melting will occur only in the presence of very water-rich materials. Melts produced in these regions have high water content and hence can be buoyant above the 410 km, removing water from the MTZ. Consequently, cooler regions of melting act as a water valve to maintain the water content of the MTZ near its threshold level (~?0.1-1.0 wt%). Mass-balance considerations explain the observed near-constant sea-level despite large fluctuations over Earth history. Observations suggesting deep-mantle melting are reviewed including the presence of low-velocity anomalies just above and below the MTZ and geochemical evidence for hydrous melts formed in the MTZ. However, the interpretation of long-term sea-level change and the role of deep mantle melting in the global water circulation are non-unique and alternative models are reviewed. Possible future directions of studies on the global water circulation are proposed including geodynamic modeling, mineral physics and observational studies, and studies integrating results from different disciplines.
Journal of Geophysical Research: Solid Earth, Vol. 124, pp. 4566-4575.
Mantle
boundary
Abstract: Ultralow?velocity zones (ULVZs) are 5-40?km?thick patches lying above Earth's core-mantle boundary. They are characterized with anomalously low seismic velocities compared with the ambient mantle and may contain important clues on the thermochemical evolution of the Earth. A recent experimental study argued that ULVZs may be caused by the accumulation of pyrite?type FeO2Hx (P phase) at the bottom of the mantle. Here for the first time, we systematically study the thermoelastic properties of both FeO2Hx solid and liquid phases. We find that P phase is likely melted near the core-mantle boundary and thus cannot be the source of ULVZs. Furthermore, in order for the molten product of P phase to cause ULVZs, the dense and nearly inviscid melts must be dynamically stable and confined within the ULVZs, which requires that the mantle is highly viscous and/or convects vigorously.
Geophysical Research Letters, Vol. 46, doi.org/ 10.1029/ 2019GL083633
Mantle
melting
Abstract: Planetary?scale melting is ubiquitous after energetic impacts early in Earth's history. Therefore, determining key melt properties, such as density, is of great significance to better understand Earth's formation and subsequent evolution. In this study, we performed state?of?art first?principles molecular dynamics simulations to examine the density of deep mantle melts, namely, hydrous Fe?rich silicate melts. We find that such hydrous melts can be gravitationally stable near Earth's core?mantle boundary given their likely high iron content. This has great implications for Earth's thermochemical evolution, as well as Earth's volatile cycle.
Geophysical Research Letters, Vol. 46, 16, pp. 9466-9473.
Mantle
water
Abstract: Planetary-scale melting is ubiquitous after energetic impacts early in Earth's history. Therefore, determining key melt properties, such as density, is of great significance to better understand Earth's formation and subsequent evolution. In this study, we performed state-of-art first-principles molecular dynamics simulations to examine the density of deep mantle melts, namely, hydrous Fe-rich silicate melts. We find that such hydrous melts can be gravitationally stable near Earth's core-mantle boundary given their likely high iron content. This has great implications for Earth's thermochemical evolution, as well as Earth's volatile cycle.
Abstract: Paleoproterozoic suture zones mark the formation of supercontinent Nuna and provide a record of North America's assembly. Conspicuously young ages (ca. 1.715 Ga) associated with deformation in southeast Wyoming craton argue for a more protracted consolidation of Laurentia, long after peak metamorphism in the Trans-Hudson orogen. Using paleomagnetic data from the newly dated 1899 ± 5 Ma Sourdough mafic dike swarm (Wyoming craton), we compare the relative positions of Wyoming, Superior, and Slave cratons before, during, and after peak metamorphism in the Trans-Hudson orogen. With these constraints, we refine a collisional model for Laurentia that incorporates Wyoming craton after Superior and Slave cratons united, redefining the Paleoproterozoic sutures that bind southern Laurentia.
Geostandards and Geoanalyical Review, Nov. 17, in press available
Technology
review
Abstract: This bibliographic review covers the research contained in twenty-one scientific journals with important contributions to geoanalysis and related scientific fields (Table 1, Figure 1). The relevance of well characterised reference materials (RMs) used as calibration materials or quality control samples for precise and accurate analyses is widely known and has often been described, for example, by Jochum and Enzweiler (2014).
Mineralogy and Petrology, doi.org/101007/ s00710-018-0623-6 10p.
Europe, Sweden
alkaline
Abstract: Potassic-richterite, ideally AKB(NaCa)CMg5TSi8O22W(OH)2, is recognized as a valid member of the amphibole supergroup (IMA-CNMNC 2017-102). Type material is from the Pajsberg Mn-Fe ore field, Filipstad, Värmland, Sweden, where the mineral occurs in a Mn-rich skarn, closely associated with mainly phlogopite, jacobsite and tephroite. The megascopic colour is straw yellow to grayish brown and the luster vitreous. The nearly anhedral crystals, up to 4 mm in length, are pale yellow (non-pleochroic) in thin section and optically biaxial (?), with ??=?1.615(5), ??=?1.625(5), ??=?1.635(5). The calculated density is 3.07 g•cm?1. VHN100 is in the range 610-946. Cleavage is perfect along {110}. EPMA analysis in combination with Mössbauer and infrared spectroscopy yields the empirical formula (K0.61Na0.30Pb0.02)?0.93(Na1.14Ca0.79Mn0.07)?2(Mg4.31Mn0.47Fe3+0.20)?5(Si7.95Al0.04Fe3+0.01)?8O22(OH1.82F0.18)?2 for a fragment used for collection of single-crystal X-ray diffraction data. The infra-red spectra show absorption bands at 3672 cm?1 and 3736 cm?1 for the ? direction. The crystal structure was refined in space group C2/m to R1?=?3.6% [I >?2?(I)], with resulting cell parameters a?=?9.9977(3) Å, b?=?18.0409(4) Å, c?=?5.2794(2) Å, ??=?104.465(4)°, V?=?922.05(5) Å3 and Z?=?2. The A and M(4) sites split into A(m) (K+), A(2/m) (Na+), A(2) (Pb2+), and M(4?) (Mn2+) subsites, respectively. The remaining Mn2+ is strongly ordered at the octahedrally coordinated M(2) site, possibly together with most of Fe3+. The skarn bearing potassic-richterite formed at peak metamorphism, under conditions of low SiO2 and Al2O3 activities and relatively high oxygen fugacities.
Restoration of Laramide right lateral strike slip in northern New Mexico by using Proterozoic piercing points: tectonic implications from theProterozoic...
U Pb Hf isotopic analysis of zircon in lower crustal xenoliths from the Navajo volcanic field: 1.4 Ga mafic magmatism and metamorphism beneath Colorado Plateau.
Contributions to Mineralogy and Petrology, Vol. 151, 3, pp. 313-330.
Geosphere via Researchgate, Vol. 3, 4, pp. 220-259.
Canada, United States
craton
Abstract: This paper presents a plate-scale model for the Precambrian growth and evolution of the North American continent. The core of the North American continent (Canadian shield) came together in the Paleoproterozoic (2.0-1.8 Ga) by plate collisions of Archean continents (Slave with Rae-Hearne, then Rae-Hearne with Superior) as well as smaller Archean continental fragments (Wyoming, Medicine Hat, Sask, Marshfield, Nain cratons). The resulting Trans-Hudson orogen was a collisional belt similar in scale to the modern Himalayas. It contains mainly reworked Archean crust, but remnants of juvenile volcanic belts are preserved between Archean masses. The thick, buoyant, and compositionally depleted mantle lithosphere that now underlies North America, although dominantly of Archean age, took its present shape by processes of collisional orogenesis and likely has a scale of mantle heterogeneity similar to that exhibited in the overlying crust. In marked contrast, lithosphere of southern North America (much of the conti nental United States) was built by progressive addition of a series of dominantly juvenile vol canic arcs and oceanic terranes accreted along a long-lived southern (present coordinates) plate margin. Early juvenile additions (Pembine-Wausau, Elves Chasmarcs) formed at the same time (1.84-1.82 Ga) the core was assembling. Following final assembly of the Archean and Paleoproterozoic core of North America by 1.8 Ga, major accretionary provinces (defined mainly by isotopic model ages) were added by arc-continent accretion, analogous to present-day convergence between Australia and Indonesia. Also similar to Indonesia, some accreted terranes contain older continental crustal material [Archean(?) Mojavia], but the extent and geometry of older crust are not well known. Accretionary provinces are composed of numerous 10 to 100 km scale terranes or blocks, separated by shear zones, some of which had compound histories as terrane sutures and later crustal-assembly structures. Major northeast-trending provinces are the Yavapai province (1.80-1.70 Ga), welded to North America during the 1.71-1.68 Ga Yavapai orogeny; the Mazatzal province (1.70-1.65 Ga), added during the 1.65-1.60 Ga Mazatzal orogeny; the Granite-Rhyolite province (1.50-1.30 Ga), added during the 1.45-1.30 Ga tectonic event associated with A-type intracratonic magmatism; and the Llano-Grenville province (1.30-1.00 Ga), added during the 1.30-0.95 Ga broader Grenville orogeny. During each episode of addition of juvenile lithosphere, the transformation of juvenile crust into stable continental lithosphere was facilitated by voluminous granitoid plutonism that stitched new and existing orogenic boundaries. Slab roll back created transient extensional basins (1.70 and 1.65 Ga) in which Paleoproterozoic quartzite-rhyolite successions were deposited, then thrust imbricated as basins were inverted. The lithospheric collage that formed from dominantly juvenile terrane accretion and stabilization (1.8-1.0 Ga) makes up about half of the present-day North American continent. Throughout (and as a result of) this long-lived convergent cycle, mantle lithosphere below the accretionary provinces was more hydrous, fertile, and relatively weak compared to mantle lithosphere under the Archean core.
Abstract: Direct constraints on the ascent, storage and eruption of mantle melts come primarily from exhumed, long-frozen intrusions. These structures, relics of a dynamic magma transport network, encode how Earth’s crust grows and differentiates over time. Furthermore, they connect mantle melting to an evolving distribution of surface volcanism. Disentangling magma transport processes from the plutonic record is consequently a seminal but unsolved problem. Here we use field data analyses, scaling theory and numerical simulations to show that the size distribution of intrusions preserved as plutonic complexes in the North American Cordillera suggests a transition in the mechanical response of crustal rocks to protracted episodes of magmatism. Intrusion sizes larger than about 100?m follow a power-law scaling expected if energy delivered from the mantle to open very thin dykes and sills is transferred to intrusions of increasing size. Merging, assimilation and mixing of small intrusions into larger ones occurs until irreversible deformation and solidification dissipate available energy. Mantle magma supply over tens to hundreds of thousands of years will trigger this regime, a type of reverse energy cascade, depending on the influx rate and efficiency of crustal heating by intrusions. Identifying regimes of magma transport provides a framework for inferring subsurface magmatic processes from surface patterns of volcanism, information preservation in the plutonic record, and related effects including climate.
Abstract: Cesanite (Ca2Na3(OH)(SO4)3), a rare mineral, has been found in a few places restricted to a geothermal field and caves. We report the new occurrence of cesanite in quite different geological site—within sulfate-rich melt inclusions in chloride segregations from kimberlites of Udachnaya-East pipe (Siberia). Two halite generations: ?esanite free and ?esanite-bearing, were distinguished in concentrically zonal segregations according to the results of the mineral and sulfate melt inclusion study by micro-Raman spectroscopy and SEM-EDS. We have applied the Raman spectroscopy and first principles calculations to understand structural and vibrational properties of cesanite daughter mineral in polyphase sulfate inclusions. Polarized spectra provided additional information on the overlapped components of the spectral profile. The Raman spectra of cesanite in the range of OH stretching vibrations are reported for the first time. The study aims to clarify the source of the Na-S-Cl-enrichment in the Udachnaya-East pipe, which is highly discussed.
Russian Geology and Geophysics, Vol. 56, pp. 1154-1161.
Technology
Spectrometry
Abstract: The results of electron probe microanalysis of several rock-forming minerals by wavelength-dispersive spectrometry (WDS) and energy-dispersive spectrometry (EDS) are compared, and the metrological characteristics of both methods are studied. The measurements were made with the use of a JXA-8100 (JEOL) microanalyzer with five wavelength-dispersive spectrometers and a MIRA 3 LMU (Tescan) scanning electron microscope equipped with an INCA Energy 450 XMax 80 (Oxford Instruments) microanalysis system. Specimens with olivine, garnet, pyroxene, ilmenite, and Cr-spinel grains were analyzed.
The variation coefficients that characterize the repeatability of a single determination are found to be ~ 0.5% for WDS and ~ 0.9% for EDS in the compositional range of the main components (C > 10%). For minor components (1% < C < 10%), the variation coefficients are 1.4% and 3.0%, respectively, and for impurities (0.3% < C < 1%), 2.7% and 13%, respectively. For lower contents EDS is almost inapplicable. The ratio of the results obtained by the two methods is reproduced with high precision: For major components, the variation coefficient is 0.56%; for minor components, 1.7%; and even for impurities, it is ~ 8%. The magnitude of the bias is between 0.2 and 3.2 rel.%, which is acceptable.
The results show that the accuracies of WDS and EDS are similar for measuring major and minor components of rock-forming minerals. Energy-dispersive spectrometry is inferior to wavelength-dispersive spectrometry for impurities and is completely inapplicable for still lower contents. This method is easier to implement, and the results are available soon after switching on the instrument. Wavelength-dispersive spectrometry needs more time for preparation, but it ensures a precise high-efficiency large-scale analysis of samples of similar compositions, even when the element contents are lower than 1%.
Abstract: Carbonates of the Tomtor complex of ultramafic alkaline rocks and carbonatites (the northern part of the Republic of Sakha Yakutia) are distinguished by a wide range of carbon isotopic composition ?13C from +2 to -59.9‰. The geological position, localization patterns, mineral and chemical compositions and the relationship with REE mineralization of samples with values of ?13C carbonates from -25 to -59‰ are characterized. The formation of abnormally low ?13C in carbonates is determined by the biogenic oxidation of methane from ?13Cmet to -70‰.
Abstract: Data indicating the important role of microorganisms in the redistribution of REEs in the weathering crust and the decisive role in the concentration of REEs during the formation of ores in the upper ore horizon of the Tomtor field are obtained. The uptake of REEs was carried out by the community of microorganisms, such as phototrophs, methanogens, methanotrophs, and proteobacteria, which form the basis of the microbiocenosis for this paleoecosystem. The isotopic composition of C carbonates in all samples studied with fossilized microorganisms corresponds to the biogenic one, and the isotopic composition ?18?SMOW (from 7 to 20‰) indicates the endogenous (hydrothermal) and, to a lesser extent, exogenous nature of the solutions. The low (87Sr/86Sr)I values of carbonates (~0.7036-0.7042) exclude the participation of seawater.
Geological Society of London, Special Publication, Vol. 470, doi:10.1144 /SP470.10
Mantle
wilson cycle
Abstract: Although the Wilson cycle is usually considered in terms of wide oceans floored with normal oceanic crust, numerous orogens result from the closure of embryonic oceans. We discuss how orogenic and post-orogenic processes may be controlled by the size/maturity of the inverted basin. We focus on the role of lithospheric mantle in controlling deformation and the magmatic budget. We describe the physical properties (composition, density, rheology) of three types of mantle: inherited, fertilized and depleted oceanic mantle. By comparing these, we highlight that fertilized mantle underlying embryonic oceans is mechanically weaker, less dense and more fertile than other types of mantle. We suggest that orogens resulting from the closure of a narrow, immature extensional system are essentially controlled by mechanical processes without significant thermal and lithological modification. The underlying mantle is fertile and thus has a high potential for magma generation during subsequent tectonic events. Conversely, the thermal state and lithology of orogens resulting from the closure of a wide, mature ocean are largely modified by subduction-related arc magmatism. The underlying mantle wedge is depleted, which may inhibit magma generation during post-orogenic extension. These end-member considerations are supported by observations derived from the Western Europe-North Atlantic region.
Variations of the oxygen conditions in mantle column beneath Siberian kimberlite pipes and it's application to lithospheric structure of feeding systems.
Vladykin: VI International Workshop, held Mirny, Deep seated magmatism, its sources and plumes, pp. 125-144.
Ashchepkov, I., Ntaflos, T., Logvinova, A., Vladykin, N., Ivanov, A., Spetsius, Z., Stegnitsky, Y., Kostrovitsky, S., Salikhov, R., Makovchuk, I., Shmarov, G., Karpenko, M., Downes, H., Madvedev, N.
Abstract: The PTX diagrams for the separate phases in Sytykanskaya (Ashchepkov et al., 2016) Dalnyaya (Ashchepkov et al., 2017), pipes shows that the PK show the relatively simple P-X trends and geotherms and shows more contrast and simple layering. The PK contain most abundant material from the root of the magma generation they are dunitic veins as the magma feeders represented by the megacrysts. New results for the Aykhal, Zarya and Komsomolskaya pipes in Alake field and Zarnitsa and Udachnaya pipes in Daldyn field show that evolution is accompanied by the developing of metasomatites and branching and veining of the wall rock peridotites . In Aykhal pipe in PK the Gar- dunites prevail, the xenoliths from the dark ABK "Rebus" contain Cr-Ti - rich garnets and ilmenites, more abundant compared with the grey carbonited breccia Nearly the same features were found for Yubileinaya pipe. The example of Komsomolskya pipes show that the ABK contain more eclogitic xenolith than PK. The developing of the magma channel shown in satellite Chukukskaya and Structurnaya pipe was followed by the separation of some parts of the magmatic feeders and crystallization of abundant Gar megacrysts near o the walls blocking the peridotites from the magma feeder. This drastically decrease diamond grade of pipes. Such blocking seems to be the common features for the latest breccias. In Zarnitsa pipe, the dark PK and ABK also contain fresh xenoliths but not only dunites but also sheared and metasomatic varieties and eclogites. Most of dark ABK in Yakutia contain the intergrowth of ilmenites with brown Ti- Cpx showing joint evolution trends. The late breccia contains completely altered peridotite xenoliths mainly of dunite- harzburgite type. The comparison of the trace elements of the coexisting minerals in megacryst show that they were derived from the protokimberlites but are not in complete equilibrium as well as other megacrystalline phases. Ilmenites show inflections of the trace element patterns of most Ilmenites but more regular for the Cpx and Garnets revealing the sub parallel patterns elevating LREE with the rising TRE. But commonly these are not continuous sequances because they developed in the pulsing moving systems like beneath Zarnitsa. The minerals from the feeders like dunites also show the inflected or S-type REE patterns. From the earlier to later phases the TRE compositions became more evolved reflecting the evolution of protokimberlites. The wall rocks also often show the interaction with the more evolved melts and sometimes "cut" spectrums due to the dissolution some phases and repeated melting events So we could suggest the joint evolution of the mantle column protokimberlites and megacrysts composition and type of kimberlites with the diamond grade. The mantle lithospheric base captured by the PK. The developing and rising protokimbelrites was followed by the crystallization of the diamonds in the gradient in FO2 zone in wall rocks due to reductions of C -bearing fluids and carbonatites (> 1 QMF) on peridotites ((< -2 -5 QMF). The most intensive reactions are near the graphite - diamond boundary where protokimberlites are breaking and where most framesites are forming.
Volcanic rocks of the Nyurbinskaya pipe: a portrayal of regional upper mantle evolution from the Riphean to the Carboniferous time, and its geodynamic relationship.
Deep Seated Magmatism, its sources and plumes, Ed. Vladykin, N.V., 2008 pp. 71-103.
Deep-seated magmatism, its sources and plumes, Proceedings of XIII International Workshop held 2014., Vol. 2014, pp. 203-232.
Russia, Yakutia
Deposit - Sytykanskaya
Abstract: The concentrate from two phases of the kimberlite (breccia and porphyritic kimberlite) and about 130 xenoliths from the Sytykanskaya pipe of the Alakit field (Yakutia) were studied by EPMA and LAM ICP methods. Reconstructions of the PTXfO2 mantle sections were made separately for the two phases. The porphyritic kimberlites and breccia show differences in the minerals although the layering and pressure interval remains the same. For the porphyritic kimberlite the trends P- Fe# - CaO in garnet, fO2 are sub-vertical while the xenocrysts from the breccia show stepped and curved trends possibly due to interaction with fluids. Minerals within xenoliths show the widest variation in all pressure intervals. PT points for the ilmenites which trace the magmatic system show splitting of the magmatic source into two levels at the pyroxenite lens (4GPa) accompanied by peridotite contamination and an increase in Cr in ilmenites. Two groups of metasomatites with Fe#Ol ~ 10-12% and 13-15% were created by the melts derived from protokimberlites and trace the mantle columns from the lithosphere base (Ilm - Gar - Cr diopside) to Moho becoming essentially pyroxenitic (Cr-diopside with Phl). The first Opx-Gar-based mantle geotherm from the Alakit field has been constructed from15 associations and is close to 35 mw/m2 in the lower part of mantle section but deviates to high temperatures in the upper part of the mantle section. The oxidation state for the protokimberlite melts determined from ilmenites is higher than for the other pipes in the Yakutian kimberlite province which probably accounts for the decrease in the diamond grade of this pipe. The geochemistry of the minerals (garnets and clinopyroxenes) from breccias, metasomatic peridotite xenoliths and pyroxenites systematically differ. Xenocrysts from the breccia were produced by the most differentiated melts and enriched protokimberlite or carbonatite; they show highly inclined nearly linear REE patterns and deep troughs of HFSE. Minerals of the metasomatic xenoliths are less inclined with lower La/Cen ratios and without troughs in spider diagrams. The garnets often show S-shaped patterns. Garnets from the Cr websterites show round REE patterns and deep troughs in Ba-Sr but enrichment in Nb-Ta-U. The clinopyroxenes reveal the inclined and inflected on Gd spectrums with variations in LREE due to AFC differentiation. The 40Ar-39Ar ages for micas from the Alakit field reveal three intervals for the metasomatism. The first (1154 Ma) relates to dispersed phlogopites found throughout the mantle column, and probably corresponds to the continental arc stage in the early stage of Rodinia. Veined highly alkaline and Ti-rich veins with richterite ~1015 Ma corresponds to the plume event within the Rodinia mantle. The ~600-550 Ma stage marks the final Rodinia break-up. The last one near 385 Ma is protokimberlite related.
Deep-seated magmatism, its sources and plumes, Proceedings of XIII International Workshop held 2014., Vol. 2014, pp. 178-202.
Africa, South Africa, Russia, Yakutia
Deposit - Dike Newlands, Nyurbinskaya
Abstract: Green garnets occur in concentrates of diamondiferous kimberlite bodies in Yakutia (Udachnaya, Mir, etc.), South Africa (Newlands, Bellsbank), Venezuela (Guaniamo sills), and Canada (Mud Lake field). Mantle xenoliths of rocks containing such garnets are very rare. We found peridotite xenoliths with green garnet in situ in kimberlites of the Newlands dike. Xenoliths are irregular in form, 4.5*1.9 cm, 1.5*0.8 cm, and 1.0*0.5 cm in size, and have similar modal compositions: gar(70)+ol(28)+sp(2), gar(9)+ol(90)+sp(1) and gar(50)+ol(30)+sp(20). Rock texture is medium-crystalline, while structure is massive. We also identified a garnet macrocryst of 0.5*0.4 cm in size with a pale green kelyphytic rim. Garnet composition in the studied samples is quite constant and is characterized by the high Cr2O3 content (10.94-11.99%) and CaO content (19.52-24.94%) at the reduced contents of TiO2 (0.24-0.52%). The chrome spinel is high Cr2O3 (55%) content and the low TiO2 (0.5-0.6%) content. Olivine is high-Mg (Fo95), but elevated CaO content (0.09%). Isotopic composition of oxygen in garnet (?18O = 4.05-4.25 pm) and olivine (?18O = 4.91 pm) differs drastically from the mantle values. Rb-Sr and Sm-Nd isotopic composition show the relatively "young" model age of the sample relative to the depleted mantle (1.78 billion years), the age of formation of this rocks is also relatively "young" - probable mezoproterozoic. In kimberlites and placers of the Nyurbinskaya pipe (Nakyn field, Yakutia) there are 4 green garnet grains of 0.5-2.0 mm in size, including one intergrowth gar+sp. Most garnets are characterized by the higher CaO (18.06-22.87%) and TiO2 (1.46, 1.65, 1.75%) contents not noted before for similar garnets. Studied green garnets have the similar "sine wave" type of REE distribution for low-Ti garnets and a "raised" type of REE distribution with enrichment in medium and light REE for high-Ti garnet.
All green garnets are characterized by an increased content of light REE and Sc. High-Ti garnets are characterized by an increased content of light and middle REE, as well as titanium, and a particularly sharply increased content of Zr (!). Paragenesis ol+sp is formed at 805oand 23.4 kbar, and paragenesis ol+gar is formed at 1080oand 23.8 kbar. The rocks are characterized by nonequilibrium paragenesis ol+sp+gar and formation at moderate depths (80-90 km) under conditions of high heat flow (52-55 mW/m2). Judging from modal composition of studied xenoliths (absence of clinopyroxene), variations in chemical compositions and trace element compositions, relatively "young" model age and non-mantle isotopy of oxygen in garnets, these rocks are not "wehrlites" and likely represent metasomatic rocks such as uvarovite-chromite veins or schlierens at the moderate depths of upper mantle - it is similar to uvarovite-chromite veins of the metasomatic or a hydrothermal origin in the crustal serpentinites.
Geodynamics and Tectonphysics in RUS, Vol. 9, 3, pp. 827-854. only 1 p. english abstract
Africa, Angola
deposit - Catoca
Abstract: This paper presents the first results of the geostructural and tectonophysical studies of the crustal stress state in the Catoca kimberlite pipe area at the southwestern flank of the Kasai Shield in the northeasternAngola. In the evolution of the crustal stress state, six main stages are distinguished by analyzing the displacements of markers, fold hinges, long axes of boudins, granite dikes of various intrusion phases and kimberlites, as well as fractures with striations. For each of these stages, a dominating horizontal tectonic stress and its orientation is identified. During stage 1 (NW extension and shearing) and at the beginning of stage 2 (NW compression), structures formed in the host rocks in brittle-plastic conditions. The replacement of plastic deformation by faulting could occur about 530-510 Ma ago, when the continental crust ofAfricahad completely formed. Stage 3 (radial, mainly NW extension) and stage 4 (shearing, NW extension, and NE compression) were the most important for kimberlite occurrence: in the Early Cretaceous, radial extension was replaced by shearing. Both stages are related to opening of the central segment of theSouth Atlantic. The main kimberlite magmas occurred during the break-up of the Angola-Brazilian segment of Gondwana. In the course of all the four stages, stress was mainly released by the NE- and E-NE-striking faults and, to a lesser extent, by the NW-striking and latitudinal faults. The initial stage of kimberlite magmatism is associated with the NE- and E-NE-striking faults due to the presence of the Precambrian zones of flow and schistosity, which facilitated the NW-trending subhorizontal extension. Stage 5 (NE compression) began in the second half of the Cretaceous and possibly lasted until the end of the Paleogene, and compression occurred mainly along the NW-striking faults. Regionally, it corresponds to two stages of inversion movements in the southern regions of Africa, during which theAngoladome-shaped uplift emerged and the shoulders of the East African rifts began to take shape. Stage 6 (horizontal extension, mainly in the N-NE direction) is related to the processes that took place in the southern segment of theTanganyikarift and the eastern coast of theAtlantic. Based on the results of our studies, it became for the first time possible to get an idea of the main stages in the evolution of the studied region. Further geostructural measurements and dating of the host rocks will provide for a more precise definition of the proposed stages.
Abstract: Approximately 700 diamond crystals were identified in volcanic (mainly pyroclastic) rocks of the Tolbachik volcano, Kamchatka, Russia. They were studied with the use of SIMS, scanning and transmission electron microscopy, and utilization of electron energy loss spectroscopy and electron diffraction. Diamonds have cube-octahedral shape and extremely homogeneous internal structure. Two groups of impurity elements are distinguished by their distribution within the diamond. First group, N and H, the most common structural impurities in diamond, are distributed homogeneously. All other elements observed (Cl, F, O, S, Si, Al, Ca, and K) form local concentrations, implying the existence of inclusions, causing high concentrations of these elements. Most elements have concentrations 3-4 orders of magnitude less than chondritic values. Besides N and H, Si, F, Cl, and Na are relatively enriched because they are concentrated in micro- and nanoinclusions in diamond. Mineral inclusions in the studied diamonds are 70-450 nm in size, round- or oval-shaped. They are represented by two mineral groups: Mn-Ni alloys and silicides, with a wide range of concentrations for each group. Alloys vary in stoichiometry from MnNi to Mn2Ni, with a minor admixture of Si from 0 to 5.20-5.60 at%. Silicides, usually coexisting with alloys, vary in composition from (Mn,Ni)4Si to (Mn,Ni)5Si2 and Mn5Si2, and further to MnSi, forming pure Mn-silicides. Mineral inclusions have nanometer-sized bubbles that contain a fluid or a gas phase (F and O). Carbon isotopic compositions in diamonds vary from -21 to -29‰ ?13CVPDB (avg. = -25.4). Nitrogen isotopic compositions in diamond from Tolbachik volcano are from -2.32 to -2.58‰ ?15NAir. Geological, geochemical, and mineralogical data confirm the natural origin of studied Tolbachik diamonds from volcanic gases during the explosive stage of the eruption.
Abstract: The carbon isotope composition of microdiamonds found in products of the Tolbachik Volcano eruption, Kamchatka (porous lavas and ash), was studied. The isotope composition of microdiamonds (with an average value of ?13C =-25.05‰) is close to that of microsized carbon particles in lavas (from-28.9 to-25.3‰). The general peculiarities of the diamond-forming environment include (1) no evidence for high pressure in the medium; (2) a reduced environment; and (3) mineralogical evidence for the presence of a fluid. The geochemical data characterizing the type of diamonds studied allow us to suggest that they were formed in accordance with the mechanism of diamond synthesis during cavitation in a rapidly migrating fluid, which was suggested by E.M. Galimov.
Abstract: The first results on diamond growth in the Fe-?-S system with 1 wt % S (relative to Fe) at 6 GPa and 1450°C have been reported. The diamonds obtained contain about 30 ppm N, on average, and belong to the low-N transition diamond group Ib-IIa. It has been suggested that the reduction conditions formed by certain active elements such as S can play an important role in the formation of natural low-N diamonds.
Emerging computer techniques for the minerals industry
Society for Mining, Metallurgy and Exploration (SME), American Institute of Mining, Metallurgical, and Petroleum Engineers (AIME) Publication, 400p. approx. $ 65.00
2019 Twelth International Conference Oct 1-3. Moscow, IEEE DOI 11.09/MLSD .2019.8911014
Africa, Angola, Russia, Yakutia
geophysics
Abstract: We show how to increase the effectiveness of the prognoses of kimberlite bodies by using airborne geophysical technologies. We show the advantages of electromagnetic and magnetic methods for predicting kimberlite pipes. You will see examples of a regional diamond survey in Angola and Siberia.
Abstract: The strength of subducted slabs in the mantle transition zone influences the style of mantle convection. Intense deformation is observed particularly in relatively old subducted slabs in the deep mantle transition zone. Understanding the cause of this regional and depth variation in slab deformation requires constraint of the rheological properties of deep mantle materials. Here, we report results of in situ deformation experiments during the olivine to ringwoodite phase transformation, from which we infer the deformation process under the conditions of cold slabs deep in the mantle transition zone. We find that newly transformed fine-grained ringwoodite deforms by diffusion creep and that its strength is substantially smaller than that of coarser-grained minerals but increases with time. Scaling analysis, based on a model of transformation kinetics and grain-size evolution during a phase transformation, suggests that a cold slab will be made of a mixture of weak, fine-grained and strong, coarse-grained materials in the deep transition zone, whereas a warm slab remains strong because of its large grain size. We propose that this temperature dependence of grain size may explain extensive deformation of cold slabs in the deep transition zone but limited deformation of relatively warm slabs.
Abstract: One of the great problems in the history of Earth’s climate is how to reconcile evidence for liquid water and habitable climates on early Earth with the Faint Young Sun predicted from stellar evolution models. Possible solutions include a wide range of atmospheric and oceanic chemistries, with large uncertainties in boundary conditions for the evolution and diversification of life and the role of the global carbon cycle in maintaining habitable climates. Increased atmospheric CO2 is a common component of many solutions, but its connection to the carbon chemistry of the ocean remains unknown. Here we present calcium isotope data spanning the period from 2.7 to 1.9 billion years ago from evaporitic sedimentary carbonates that can test this relationship. These data, from the Tumbiana Formation, the Campbellrand Platform and the Pethei Group, exhibit limited variability. Such limited variability occurs in marine environments with a high ratio of calcium to carbonate alkalinity. We are therefore able to rule out soda ocean conditions during this period of Earth history. We further interpret this and existing data to provide empirical constraints for carbonate chemistry of the ancient oceans and for the role of CO2 in compensating for the Faint Young Sun.
Russian Geology and Geophysics, Vol. 63, pp. 166-183.
Russia, Siberia
deposit - Udachnaya
Abstract: Results of a geochemical study of brines and oil occurrences in the Udachnaya kimberlite pipe are presented. Like other intrusions in the Daldyn-Alakit diamondiferous region, this diamond deposit is a unique cryohydrogeologic microstructure differing from the host sedimentary rocks and other diamond pipes of the Yakutian diamond-bearing province. Two waterlogged zones distinguished in the section of orebodies at the explored depths of the deposit correspond to the upper and middle Cambrian aquifers. Predominantly acidic (average pH = 5.5) Cl-Ca and Cl-Ca-Na brines with TDS from 94.3 to 391.3 g/dm3 are widespread within the orebodies and host rocks. The brine mineralization and contents of major salt-forming components increase with depth, to the horizon at the -365 m elevation, where TDS reaches 391 g/dm3, while below, at the -650 m level with noted hydrogeochemical-field inversion, TDS is 253 g/dm3. The mineralization of Cl-Ca, Cl-Ca-Na, Cl-Ca-Mg, and Cl-Ca-Mg-Na brines in the upper Cambrian rocks varies from 102.9 to 192.9 g/dm3, and the pH values, from 4.9 to 6.2, averaging 5.6. Among the microcomponents, the highest average concentrations (mg/dm3) are found for Br1292.8 > S875.7 > Sr453.7 > Fe79.7 > Li53.4 > B32.7 > I13.3 > Si10.8 > Mn6.4 > Se3.6 > Rb2.3. The values of genetic coefficients vary widely: The rNa/rCl coefficient ranges from 0.18 to 0.31; rCa/rMg, from 1.03 to 3.60; Ca/Cl, from 0.2 to 0.3; and the integrated metamorphism index S (according to S.L. Shvartsev) varies from 193 to 277. The middle Cambrian rock complex, containing more saline brines, has been examined in much more detail. It hosts Cl-Ca, Cl-Ca-Na, Cl-Ca-Mg, and Cl-Na-Mg brines with TDS from 94.3 to 391.3 g/dm3 and high average concentrations (mg/dm3) of microcomponents: Br2224.9 > Sr1024.9 >S500.1 > B202.9 > Li147.1 > Fe97.0 > I33.2 > Rb11.4 > Si9.6 > Se9.5 > Mn3.6 > Ni1.7. As compared with brines in the overlying rocks, the middle Cambrian brines show a wider variation in element ratios: rNa/rCl from 0.14 to 0.34, rCa/rMg from 0.66 to 9.71, and Ca/Cl from 0.03 to 0.45. These brines are also characterized by a significantly higher metamorphism grade, which is indicated not only by the rNa/rCl and rCa/rMg ratios but also by the S index varying from 278 to 316. The composition of stable isotopes ?D and ?18O) and dissolved inorganic carbon ?13C) of the brines was investigated. The studied waters are assumed to be of sedimentary-metamorphic origin. Their isotopic composition reflects the climatic conditions existing at the time of their burial, which were probably aggravated by the contribution of the oxygen isotope exchange with water-bearing rocks. The ?13C values of carbon dioxide dissolved in water allow an inference about its biogenic origin. The biogenic carbon isotope exchange is governed by the relationship between methanogenic and SMT processes. Analysis of the 87Rb/86Sr and 87Sr/86Sr isotope ratios of the studied brines has revealed affinity between the isotopic compositions of waters in the Cambrian deposits and in ancient seawaters. The mass chromatograms of saturated-hydrocarbon (HC) fractions show at least two individual types of oils and malthas (naphthides). The third variety resulted from their mixing at different stages of migration. The fourth is from the contact zone; it changed during the explosion of kimberlites. The first, most common, type of naphthides (“postexplosive”) is similar in all geochemical parameters to oils from the Nepa-Botuobiya anteclise, in particular, to those from the Mirnyi arch. Oils of the second (pre-explosive) type are found only in the Udachnaya Formation, within the depth range 1130-1430 m.
Abstract: An excess or deficit of mass is reflected in the gravity anomaly data. Gravity anomalies measured by satellite and airborne and shipborne instruments show variations in topography and bathymetry, sedimentary thickness, basement rock density contrast, crustal thickness, and even mantle convection. Using new geophysical data and an improved 3?D gravity inversion method, we calculate the crustal thickness of oceanic domains in the High Arctic and northern North Atlantic. This model helps to better understand the tectonic structure of poorly surveyed and difficult to access Arctic regions. ArcCRUST can be used to better constrain the deeper Arctic region structure.
Uranium in xenoliths of mantle from kimberlite pipes Udachanaya andObnazhennaya, northern Yakutia- new determination by Fradiographytechnique.(Russian)
Geochemistry International (Geokhimiya), (Russian), No. 1, pp. 100-114
Abstract: The question of whether high-grade metamorphism and crustal melting in the early Archaean were associated with modern-style plate tectonics is a major issue in unravelling early Earth crustal evolution, and the eastern Kaapvaal craton has featured prominently in this debate. We discuss a major ca. 3.2?Ga tectono-magmatic-metamorphic event in the Ancient Gneiss Complex (AGC) of Swaziland, a multiply deformed medium- to high-grade terrane in the eastern Kaapvaal craton consisting of 3.66-3.20?Ga granitoid gneisses and infolded greenstone remnants, metasedimentary assemblages and mafic dykes. We report on a 3.2?Ga granulite-facies assemblage in a metagabbro of the AGC of central Swaziland and relate this to a major thermo-magmatic event that not only affected the AGC but also the neighbouring Barberton granitoid-greenstone terrane. Some previous models have related the 3.2?Ga event in the eastern Kaapvaal craton to subduction processes, but we see no evidence for long, narrow belts and metamorphic facies changes reflecting lithospheric suture zones, and there is no unidirectional asymmetry in the thermal structure across the entire region from Swaziland to the southern Barberton granite-greenstone terrane as is typical of Phanerozoic and Proterozoic belts. Instead, we consider an underplating event at ca. 3.2?Ga, giving rise to melting in the lower crust and mixing with mantle-derived under- and intraplated mafic magma to generate the voluminous granitoid assemblages now observed in the AGC and the southern Barberton terrane. This is compatible with large-scale crustal reworking during a major thermo-magmatic event and the apparent lack of a mafic lower crust in the Kaapvaal craton as shown by seismic data.
Abstract: Magmatism of the Povungnituk Group of the Cape Smith Belt, northern Superior craton, was formed in three stages: (i)early alkaline magmatism and associated carbonatites (undated), (ii) a main flood basalt sequence (Beauparlant Formation) (constrained between 2040 and 1991?Ma), and (iii) a late stage alkaline pulse (Cecilia Formation) (ca. 1959?Ma). We suggest that the main stage of magmatic activity (middle pulse) was of short duration. A new UPb baddeleyite age of 1998?±?6?Ma is obtained from a dolerite sill intruding the uppermost section of the Beauparlant Formation. This age has regional significance because it matches the previously obtained 1998?±?2?Ma age for the Watts Group (Purtuniq) ophiolite of the northern Cape Smith Belt and the 1998?±?2?Ma?U-Pb age of the Minto dykes intruding the craton to the south. These coeval units, along with additional units correlated on paleomagnetic grounds (Eskimo Formation), are interpreted to define a large igneous province (LIP), extending over an area of >400,000?km2, which we herein define as the Minto-Povungnituk LIP. Geochemical comparison between the Watts Group ophiolite, Minto dykes and the mafic Povungnituk Group shows significant differences allowing these data to be divided into two groups and domains within the LIP. A northern domain, comprising the Povungnituk and Watts groups, shows mixing between a depleted mantle source and a more enriched mantle plume-sourced melt. A southern domain comprising the Minto dykes and the paleomagnetically linked Eskimo Formation shows signs of an even more enriched source, while these magmas also show the effect of crustal contamination. Two distinct source mechanisms can be responsible for the observed geochemical differences between the two domains. First, a difference in lithospheric sources, where melting of different portions of Superior craton lithosphere caused the different melt signatures in the interior of the craton. In this case magmatism in the two domains is only related by having the same heat source (e.g.,a mantle plume) interpreted to be located on the northwestern side of the northern Superior craton. Second, two distinct deep mantle sources that remained separated within the ascending plume. This is analogous to some current hotspots interpreted to sample both large low shear velocity provinces (LLSVP) and adjacent ambient deep mantle. This latter interpretation would allow for the use of bilateral chemistry in LIPs as a potential tool for the recognition and mapping of the LLSVP boundaries throughout Earth's history.
Indian Journal of Science and Technology, 12p. Pdf
India
Craton - Dharwar
Abstract: Objectives: To map the kimberlite pipes emplaced in parts of Anantpur District, India using Landsat-8 OLI multispectral data. Kimberlite are considered as the primary host of natural diamond. Kimberlite pipes have very limited exposure and are altered, therefore the indirect surface indicators associated with kimberlite such as ferric iron bearing minerals (hematite, goethite), hydroxyl (clay) and carbonate (calcrete) minerals, were mapped to trace kimberlite pipe. Methods: Feature based Principal Component Analysis (FPCA) was applied over the OLI bands 2, 4, 5 and 6, and 2, 5, 6 and 7 to generate ferric iron (F image) and hydroxyl/carbonate image (H/C images). The color composite was generated by assigning RGB colours to F, H/C and F+H/C images. Findings: When matched with the pre-explored kimberlite pipe locations, it was observed that the kimberlitic pipes display different colours in the above colour composite. Hence, the Isodata clustering was carried out to segregate the classes, which resulted in 12 unique classes. Of these, the kimberlite pipes fall in 4 classes. However, due to the moderate resolution of OLI, false positive areas were also noted. Further the target area was found to be reduced by incorporating the structural control (lineament) over the emplacement of Kimberlite pipes. Novelty: The present work highlights the usefulness of the moderate resolution multispectral image in mapping the Kimberlite pipes in semiarid region, in absence of a hyperspectral sensor.
Abstract: To study the kinetics of the spinel-to-garnet transformation in peridotite, we conducted reaction experiments in the garnet peridotite stability field (3.2 GPa, 1020-1220 °C, for 0.6-30 h) using a single spinel crystal embedded in monomineralic orthopyroxene powder or in a mixture of powdered orthopyroxene and clinopyroxene. The growth textures observed in the reaction rim between the spinel crystal and the polycrystalline pyroxenes show that the reaction rim grew in both the spinel and pyroxenes directions, suggesting mobility of both SiO2 and R2O3 components (where R is a trivalent cation). Olivine grains formed only in the presence of monomineralic orthopyroxene and were present in some domains without forming reaction rims. Based on a diffusion-controlled growth model, the growth kinetics of the garnet reaction rim can be described by [x(t)]2 = k0 exp(?H*/RT)t, where x(t) is the rim width at time t, R is the gas constant, T is the absolute temperature, and H* is the activation enthalpy of reaction; k0 and H* are, respectively, k0 = 10?19.8 ± 4.9 m2/s and H* = 171 ± 58 kJ/mol. The development of a garnet reaction rim around a spinel core has been observed in alpine-type peridotitic rocks and mantle xenoliths. The reaction rims experimentally produced in this study are characteristic of corona textures observed in natural rocks, and the experimentally measured growth rate of the rims places important constraints on dynamic transformation processes involving spinel and garnet in peridotite. However, to reconstruct the P-T-t history of the corona texture based on these elementary processes, additional detailed studies on the textural evolution and quantitative kinetics of the garnet-rim growth stage are required.
Current Science, Vol. 114, 6, Mar. 25, pp. 1299-1303.
India
legal
Abstract: Scholarly journals play an important role in maintaining the quality and integrity of research by what they publish. Unethical practices in publishing are leading to an increased number of predatory, dubious and low-quality journals worldwide. It has been reported that the percentage of research articles published in predatory journals is high in India. The University Grants Commission (UGC), New Delhi has published an 'approved list of journals', which has been criticized due to inclusion of many substandard journals. We have developed a protocol with objective criteria for identifying journals that do not follow good publication practices. We studied 1336 journals randomly selected from 5699 in the university source component of the 'UGC-approved list'. We analysed 1009 journals after excluding 327 indexed in Scopus/Web of Science. About 34.5% of the 1009 journals were disqualified under the basic criteria because of incorrect or non-availability of essential information such as address, website details and names of editors; another 52.3% of them provided false information such as incorrect ISSN, false claims about impact factor, claimed indexing in dubious indexing databases or had poor credentials of editors. Our results suggest that over 88% of the non-indexed journals in the university source component of the UGC-approved list, included on the basis of suggestions from different universities, could be of low quality. In view of these results, the current UGC-approved list of journals needs serious reconsideration. New regulations to curtail unethical practices in scientific publishing along with organization of awareness programmes about publication ethics at Indian universities and research institutes are urgently needed.
Abstract: The Russian company New Diamond Technology is producing colorless and near-colorless HPHT-grown synthetic diamonds for the gem trade. Forty-four faceted samples synthesized using modified cubic presses were analyzed using a combination of spectroscopic and gemological techniques to characterize the quality of the material and determine the means of distinguishing them from natural, treated, and alternative laboratory-grown diamonds. These samples, with weights ranging from 0.20 to 5.11 ct, had color grades from D to K and clarity grades from IF to I2. Importantly, 89% were classified as colorless (D-F), demonstrating that HPHT growth methods can be used to routinely achieve these color grades. Infrared absorption analysis showed that all were either type IIa or weak type IIb, and photoluminescence spectroscopy revealed that they contained Ni-, Si-, or N-related defects. Their fluorescence and phosphorescence behavior was investigated using ultraviolet excitation from a long-wave/short-wave UV lamp, a DiamondView instrument, and a phosphorescence spectrometer. Key features that reveal the samples’ HPHT synthetic origin are described.
Diamond and Related Materials, in press available 33p.
Global
DiaMap
Abstract: Type IIb diamonds are those that contain more boron than nitrogen. The presence of this uncompensated boron gives rise to absorption in the infrared part of the electromagnetic spectrum, extending into the visible region and often resulting in blue colouration. Here we report on the expansion of the DiaMap freeware (for the automated spectral deconvolution of Type I [nitrogen containing] diamonds) to work on Type IIb diamonds, returning concentrations from three boron-related absorption bands, and determining which band provides the most reliable value. The program uses the calibration coefficients of Collins (2010), which show good relative agreement between the three bands, but might require some further study to confirm their absolute accuracy to the uncompensated boron concentration. The methodology of DiaMap_IIb is applicable to all Type IIb diamonds, both natural and synthetic. Analysis of high-resolution Fourier-transform infrared (FTIR) maps of two high-pressure high-temperature (HPHT) synthetic diamonds using DiaMap_IIb, confirm the growth sector dependence of the boron incorporation. Partitioning of boron strongly favours the octahedral {111} sectors.
Diamonds & Related Materials, In press available, 30p. Pdf
Global
synthetics
Abstract: Type IIb diamonds are those that contain more boron than nitrogen. The presence of this uncompensated boron gives rise to absorption in the infrared part of the electromagnetic spectrum, extending into the visible region and often resulting in blue colouration. Here we report on the expansion of the DiaMap freeware (for the automated spectral deconvolution of Type I [nitrogen containing] diamonds) to work on Type IIb diamonds, returning concentrations from three boron-related absorption bands, and determining which band provides the most reliable value. The program uses the calibration coefficients of Collins (2010), which show good relative agreement between the three bands, but might require some further study to confirm their absolute accuracy to the uncompensated boron concentration. The methodology of DiaMap_IIb is applicable to all Type IIb diamonds, both natural and synthetic. Analysis of high-resolution Fourier-transform infrared (FTIR) maps of two high-pressure high-temperature (HPHT) synthetic diamonds using DiaMap_IIb, confirm the growth sector dependence of the boron incorporation. Partitioning of boron strongly favours the octahedral {111} sectors.
Migration of elements from carbonatites into dolostone at Carillon Dam, southeastern Ontario
Geological Association of Canada (GAC)/Mineralogical Association of Canada (MAC) Vancouver 90 Program with Abstracts, Held May 16-18, Vol. 15, p. A59. Abstract
Abstract: Vivid blue to green copper-bearing tourmalines, known as Paraíba tourmalines, are recovered from deposits in Brazil, Nigeria, and Mozambique. These tourmalines are sought after for their intense colors. Prices are based, in part, on the geographic origin of a stone, and determining provenance is thus an important aspect for Paraíba tourmaline. However, their geographic origin cannot be established by standard gemological testing and/or qualitative chemical analyses. GIA has established sophisticated criteria requiring quantitative chemical analyses to determine geographic origin for these tourmalines. These criteria were based on several hundred samples from known sources spanning the three countries. Highly accurate and precise quantitative elemental concentrations for Cu, Zn, Ga, Sr, Sn, and Pb are acquired with laser ablationinductively coupled plasmamass spectrometry (LA-ICP-MS). These data can then be plotted as a function of elemental concentration for accurate geographic origin determination.
Abstract: An open question for solid-earth scientists is the amount of water in Earth’s interior. The uppermost mantle and lower mantle contain little water because their dominant minerals, olivine and bridgmanite, have limited water storage capacity. In contrast, the mantle transition zone (MTZ) at a depth of 410 to 660 km is considered to be a potential water reservoir because its dominant minerals, wadsleyite and ringwoodite, can contain large amounts of water [up to 3 weight % (wt %)]. However, the actual amount of water in the MTZ is unknown. Given that water incorporated into mantle minerals can lower their viscosity, we evaluate the water content of the MTZ by measuring dislocation mobility, a property that is inversely proportional to viscosity, as a function of temperature and water content in ringwoodite and bridgmanite. We find that dislocation mobility in bridgmanite is faster by two orders of magnitude than in anhydrous ringwoodite but 1.5 orders of magnitude slower than in water-saturated ringwoodite. To fit the observed mantle viscosity profiles, ringwoodite in the MTZ should contain 1 to 2 wt % water. The MTZ should thus be nearly water-saturated globally.
Geophysical Research Letters, Vol. 46, 15, pp. 8731-8740.
Mantle
bridgmanite
Abstract: The lower mantle encompasses the largest region of the Earth's interior and is mainly composed of the perovskite?structured mineral (Mg,Fe,Al)(Al,Si)O3 bridgmanite. Its properties, therefore, control both the diffusive transport of elements and solid state flow in the lower mantle, which will be strongly influenced by point defects. We have identified and quantified defects in bridgmanite that arise from the replacement of silicon by aluminum and result in the creation of a vacant oxygen site. These oxygen defects are also found to form clusters in the structure, which in other perovskite structured minerals have been shown to strongly affect physical properties. As defect formation and ordering is dependent on composition and pressure, strong variations in physical properties may be expected within the upper 300 km of the lower mantle.
Abstract: The Earth’s mantle is characterized by a sharp seismic discontinuity at a depth of 660?km that can provide insights into deep mantle processes. The discontinuity occurs over only 2?km—or a pressure difference of 0.1?GPa—and is thought to result from the post-spinel transition, that is, the decomposition of the mineral ringwoodite to bridgmanite plus ferropericlase. Existing high-pressure, high-temperature experiments have lacked the pressure control required to test whether such sharpness is the result of isochemical phase relations or chemically distinct upper and lower mantle domains. Here, we obtain the isothermal pressure interval of the Mg-Fe binary post-spinel transition by applying advanced multi-anvil techniques with in situ X-ray diffraction with the help of Mg-Fe partition experiments. It is demonstrated that the interval at mantle compositions and temperatures is only 0.01?GPa, corresponding to 250?m. This interval is indistinguishable from zero at seismic frequencies. These results can explain the discontinuity sharpness and provide new support for whole-mantle convection in a chemically homogeneous mantle. The present work suggests that distribution of adiabatic vertical flows between the upper and lower mantles can be mapped on the basis of discontinuity sharpness.
Earth and Planetary Science Letters, Vol. 570, 117088
Mantle
bridgemanite
Abstract: Water solubility in the dominant lower-mantle bridgmanite phase remains controversial. Discrepancies between previous results highlight the importance of the growth high-quality single crystals of bridgmanite under high-pressure and high-temperature conditions corresponding to the top of the lower mantle. Here we synthesized high-quality single crystals of aluminous bridgmanite up to 300 ?m in size that were saturated with hydrous melt at 24-26 GPa and 1700-1900 K using both stoichiometric and MgO-rich non-stoichiometric hydrous starting materials in a multi-anvil press. Fourier-transform infrared spectroscopy measurements on clear and pure spots of the single-crystal bridgmanites did not detect any pronounced OH-stretching bands, which were prominent in some earlier studies. The present results support that the lower-mantle dominated bridgmanite is nearly dry, at least at the top of the lower mantle, and that Al3+ and Fe3+ cannot enhance water incorporation into the crystal structure even in the presence of oxygen vacancies. Large partition coefficients of water between transition-zone minerals and dry lower-mantle dominated bridgmanite further support dehydration melting at the top of the lower mantle. We suggest that the majority of the top of a pyrolitic lower mantle is nearly dry based on the dry principal minerals and stability of hydrous phases in this region.
Journal of Geophysical Research, Solid Earth, Vol. 127, 2, 10.1029/2021JB023562 11p. Pdf
Mantle
core-boundary
Abstract: This study estimates the temperature profile of the Earth's mantle by generally following the approach described in Katsura et al. (2010), https://doi.org/10.1016/j.pepi.2010.07.001. The estimation consists of two steps. First, the temperature at the 410-km seismic discontinuity (D410), at which the seismic wave velocities abruptly increase almost everywhere in the mantle, is evaluated. The D410 is usually attributed to the olivine-wadsleyite transition in peridotite. Comparing the globally averaged D410 depth with the phase diagram of the olivine-wadsleyite transition yields a D410 temperature of 1839 (38) K. Second, this temperature is extrapolated to shallower and deeper regions by assuming that the heat is mainly transferred by convection in the mantle. The temperature gradient in such cases is the product of the thermal expansion coefficient and the temperature divided by the density and the heat capacity. The thermal expansion coefficients of the major mantle mineral are obtained by recalculating our previous experimental data. We found that the temperatures at 50-km depth, the bottom of the mantle transition zone, the top of the lower mantle, and 2,800-km depth are found to be 1646 (35), 1994 (40), 1960 (40), and 2587 (60) K, respectively. The 50-km depth temperature is slightly higher but generally agrees to that estimated from the melting of depleted peridotite.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, in press available
Africa, East Africa
Dyke swarms
Abstract: The role of dike intrusion in driving continental breakup is fundamental to our understanding of plate tectonics. Buck (2004) showed that the breakup of thick continental lithosphere requires more than far-field tectonic forces, illustrating the important role of dike opening in driving extension during the earliest stages of rifting. Upper crustal diking in rift environments is often depicted to occur through long (up to 80 km), sub-parallel swarms intruding along the full length of rift basins. These assertions are supported by recent dike-driven rifting events in Iceland and Ethiopia (Wright et al., 2012), and inform numerical modelling studies addressing the mechanical effects of dike intrusion to rift processes (e.g., Buck et al., 2005).
Our current view of dike networks, however, may be biased to evolved (>20 Ma), oceanic (e.g., Krafla) or nascent (e.g., Dabbahu-Manda-Hararo) spreading centers. This is largely because magmatic rifting occurs in these regions with a high enough frequency that it can be persistently captured using modern-day monitoring techniques (e.g., InSAR and seismicity). Dike networks throughout other sectors of the East African Rift may instead exhibit greater complexity, particularly in early-stage rifts (<10 Ma) undergoing infrequent diking episodes (Calais et al., 2008). By unravelling the contributions of dikes in these basins we can further refine our understanding of the role of magmatism during continental rift initiation.
Current geophysical techniques (e.g., seismic reflection) lack the capacity to resolve thin, sub-vertical structures in the sub-surface, and thus reconstructing the geometries of cooled, upper crustal dike swarms poses a significant challenge. Recent structural and volcanological studies in both active and eroded monogenetic volcanic fields have illustrated the utility of volcanic vent alignments and cone morphometrics for inferring the distributions and orientations of upper crustal dikes (Kiyosugi et al., 2012; Le Corvec et al., 2013; Keir et al., 2015). The East African Rift exhibits numerous monogenetic cone fields that may help us understand the distribution and geometry of shallow dike-feeders emplaced in the last few million years (Korme et al., 1997; Mazzarini et al., 2013). Building on these studies and methods, we performed a comparative analysis of upper crustal diking in various rift basins throughout East Africa, based on the distributions, alignments and morphologies of monogenetic cones (Muirhead et al., 2015).
Abstract: Carbon from Earth’s interior is thought to be released to the atmosphere mostly via degassing of CO2 from active volcanoes1, 2, 3, 4. CO2 can also escape along faults away from active volcanic centres, but such tectonic degassing is poorly constrained1. Here we use measurements of diffuse soil CO2, combined with carbon isotopic analyses to quantify the flux of CO2 through fault systems away from active volcanoes in the East African Rift system. We find that about 4?Mt?yr?1 of mantle-derived CO2 is released in the Magadi-Natron Basin, at the border between Kenya and Tanzania. Seismicity at depths of 15-30?km implies that extensional faults in this region may penetrate the lower crust. We therefore suggest that CO2 is transferred from upper-mantle or lower-crustal magma bodies along these deep faults. Extrapolation of our measurements to the entire Eastern rift of the rift system implies a CO2 flux on the order of tens of megatonnes per year, comparable to emissions from the entire mid-ocean ridge system2, 3 of 53-97?Mt?yr?1. We conclude that widespread continental rifting and super-continent breakup could produce massive, long-term CO2 emissions and contribute to prolonged greenhouse conditions like those of the Cretaceous.
Journal of African Earth Sciences, Vol. 129, pp. 94-107.
Africa, Cameroon
Craton, Congo
Abstract: We used the World Gravity Map (WGM 2012) data to investigate the Archean Congo craton and the Oubanguides orogenic belt in Cameroon. The Oubanguides orogenic belt constitutes, from northwest to southeast, the Neoproterozoic West Cameroon domain, the Paleoproterozoic-Neoproterozoic Adamawa-Yade domain, and the dominantly Neoproterozoic Yaoundé domain (the crustal expression of the suture zone between the Congo craton and the orogenic terranes). We analyzed the WGM 2012 data to identify different gravity anomalies. We also applied the two-dimensional (2D) radially-averaged power spectral analysis to the WGM 2012 data to estimate the Moho depth. Additionally, we developed a 2D forward gravity model along a Nsbnd S profile to image the lithospheric structure of the Precambrian entities. We found that: (1) the Congo craton, the Yaoundé domain, the southeastern part of the West Cameroon domain, and the northern part of the Adamawa-Yade domain are characterized by low gravity anomaly. (2) the southern part of the Adamawa-Yade domain is marked by a pronounced E-W trending high gravity anomaly. (3) the crust is thicker beneath the Congo craton, the Yaoundé domain and the southern part of the Adamawa-Yade domain. (4) the presence of a denser lower crust material beneath the southern part of the Adamawa-Yade domain. We propose that this denser crustal material is an under-thrusted portion of the Congo craton that has been densified through metacratonization processes that accompanied collision between the craton and the orogenic terranes. This is in good agreement with geological and geochemical observations indicating that the northern edge of the Congo craton and the Adamawa-Yade domain had undergone metacratonization during the Neoproterozoic. Our suggestion is also in good agreement with observations which show that the margins of many cratons worldwide have been decratonized due to subduction processes. Our work highlights the importance of potential field geophysical data in mapping the metacratonized margins of cratons.
Geological Society of London Special Publication, Vol. 457, pp. 339-351.
India
Tectonics
Abstract: In this short paper, we outline the potential links between India and the East Antarctica region from Enderby Land to Princess Elizabeth Land using the Mesozoic East Gondwana configuration as a starting point. Palaeomagnetic data indicate that East Gondwana did not exist prior to the Ediacaran-Cambrian. Early Neoproterozoic (1050-950 Ma) deformation in East Antarctica and along the Eastern Ghats Province in India marks the initial contact between the two regions. Volcanism in the Kerguelen hotspot led to final break-up of India and East Antarctica in the Cretaceous. Although connections between the Archaean and Proterozoic provinces of India and East Antarctica have been proposed, the current record of large igneous provinces (or dyke swarms), palaeomagnetic data and geochronology do not show a consistently good match between the two regions.
Geochemistry, Geophysics, Geosystems, Vol. 19, 12, pp. 4694-4721.
Mantle
melting
Abstract: Basaltic lavas, created by melting the convecting mantle, show variability of concentration of trace element that are correlated with their affinity for the liquid phase during melting. The observed variability in lavas and melt inclusions carries information about heterogeneity in the mantle. The difficulty is to disentangle the contributions of source heterogeneity (i.e., spatial variability of mantle composition before melting) and process heterogeneity (i.e., spatial and temporal variability in melt transport). Here we develop an end?member model of the source heterogeneity and show that it is inadequate to explain observations.
Geochemistry, Geophysics, Geosystems, Vol. 20, 1, pp. 5667-5690.
Mantle
subduction
Abstract: The amount of H2O and CO2 that is carried into deep mantle by subduction beyond subarc depths is of fundamental importance to the deep volatile cycle but remains debated. Given the large uncertainties surrounding the spatio?temporal pattern of fluid flow and the equilibrium state within subducting slabs, a model of H2O and CO2 transport in slabs should be balanced between model simplicity and capability. We construct such a model in a two?part contribution. In this Part I of our contribution, thermodynamic parameterization is performed for the devolatilization of representative subducting materials—sediments, basalts, gabbros, peridotites. The parameterization avoids reproducing the details of specific devolatilization reactions, but instead captures the overall behaviors of coupled (de)hydration and (de)carbonation. Two general, leading?order features of devolatilization are captured: (1) the released volatiles are H2O?rich near the onset of devolatilization; (2) increase of the ratio of bulk CO2 over H2O inhibits overall devolatilization and thus lessens decarbonation. These two features play an important role in simulation of volatile fractionation and infiltration in thermodynamically open systems. When constructing the reactive fluid flow model of slab H2O and CO2 transport in the companion paper Part II, this parameterization can be incorporated to efficiently account for the open?system effects of H2O and CO2 transport.
Global and Planetary Change, doi.org/j.gloplacha.2017.10.011 24p.
Africa
geodynamics
Abstract: Modern satellite gravimetry is now considered one of the most powerful and effective instrument for regional tectono-geodynamic zonation. Satellite gravity observations clearly fit the definition of 'big data' because of their volume and variety. The Arabian - NE African region discussed in this article has intricate geodynamic features including active rift zones, high seismic activity and collision processes, a rich structural pattern made up of the mosaic block system of continental and oceanic crusts of different ages, as well as several of the greatest gravity anomalies and complex magnetic anomaly mosaics. This region also has the world's main hydrocarbon resources and a vast number of other economic deposits. A comprehensive analysis of these satellite derived gravity data were used to construct a series of new maps that localize the key properties of the lithosphere of the region. A careful examination of numerous geological sources and their combined inspection with satellite derived gravity and other geophysical data resulted in this new integrated tectonic map of the Arabian-African region. An analysis of the series of gravity map transformations and certain geological indicators document the significant geodynamic features of the region.
Abstract: In the Arabian-Northern African region, interaction of the Nubian, Arabian and Eurasian plates and many small tectonic units is conspicuous. In order to better understand this interaction, we use satellite derived gravity data (retracked to the Earth’s surface) recognized now as a powerful tool for tectono-geodynamic zonation. We applied the polynomial approximation to the gravity data which indicated the presence of a large, deep ring structure in the eastern Mediterranean centered below the Island of Cyprus. Quantitative analysis of residual gravity anomaly provides an estimate of the deep anomalous body’s upper edge at a depth of about 1700 km. Computations of the residual gravity anomalies for the lower mantle also indicate presence of anomalous sources. The GPS vector pattern coinciding with the gravity trend implies counter clockwise rotation of this structure. Independent analyses of the geoid isolines map and seismic tomography data support the existence of a deep anomaly. Paleomagnetic data analysis from the surrounding regions confirms a counter clockwise rotation. Numerous petrological, mineralogical, geodynamical and tectonic data suggest a relation between this deep structure and near-surface processes. This anomaly sheds light on a number of phenomena including the Cyprus gravity anomaly, counter clockwise rotation of the Mesozoic terrane belt and asymmetry of basins along continental transform faults.
Abstract: Tectonically the considered area of junction of four lithospheric plates (Nubian, Arabian, Aegean- Anatolian and Sinai) belongs to the Eastern Mediterranean, with its Cyprus-Levantine marine and Anatolian-Nubian-Arabian continental framing. The anomalousness of the region is manifested in the tectono-structural features of the mantle, lithosphere, hydrosphere and specifics of atmospheric, biospheric processes, and Hominid evolution.
Proceedings of the VIII International Scientific Conference "Geophysics and Geodynamics" held Lviv, Ukraine., 5p. Pdf
Europe, Israel
geophysics - magnetics
Abstract: The eastern Mediterranean is a tectonically complex region evolving in the long term located in the midst of the progressive Afro-Eurasian collision. Despite years of investigation, its geological-geophysical structure is not completely known. At the same time, the recent discovery of large gas deposits has attracted the attention of many researchers to this region. For instance, the latest U. S. Geological Survey estimates using conventional assessment methodology suggest that there are on the order of 1.7 billion barrels of recoverable oil and more than 4 trillion m3 of recoverable gas in the Levant Basin [1]. This highlights the need for analysis of the paleogeographical conditions that can yield deep paleotectonic criteria for oil and gas discovery in this region. For this purpose, isopach maps of the Middle-Upper Jurassic and Lower Cretaceous were generated from detailed examinations of numerous well sections and the most sig- nificant outcroppings in the eastern Mediterranean. The maps confirm an earlier model of continental accretion [2]. In particular, abrupt changes in the trend and thickness of the Early Mesozoic formations coincide with the terrane boundaries. These compiled isopach maps also pinpoint significant distinctions between the Arabian and Sinai plates on the one hand and the Syrian arc on the other. A new tectonic map of the eastern Mediterranean is presented that first of all integrates geophysical satellite-derived gravity and airborne magnetic fields, as well as tectonic-structural, paleo-geographical and facial analyses. The results have clear implications for hydrocarbon prospecting in this region.
Applied Sciences, , Preprints 2022, 2022040226 (doi: 10.20944/preprints202204.0226.v1) 24p. Pdf
Mantle
geophysics
Abstract: The easternmost Mediterranean is a distinct transition zone from the ocean to the continent located at the junction between the largest Earth's lithospheric segments: Eurasian and African. The methodology of paleomagnetic mapping of such transition zones is based on integrating the mapping techniques for both continental and oceanic platforms: paleomagnetic reconstructions, results of radiometric dating of magnetized rocks, tectonic-structural reconstructions, biogeography, and utilization of the results of various geophysical surveys. The geodynamic-paleomagnetic mapping makes it possible to reveal the multilevel structural heterogeneity and display complex elements of the geodynamics of different ages inherent in this transition zone. Northern Israel is obviously the most complex area in the easternmost Mediterranean. For the combined paleomagnetic mapping, well-studied paleomagnetically and radiometrically areas were selected: (1) the Carmel area, (2) the Atlit area (internal part of the Carmel area), (3) the Sea of Galilee with the adjoining zones (primarily, the Kinnarot Valley), and (4) the area of the Hula Basin with adjacent areas of the Golan Plateau, Hermon Mt., and Galilea uplift. The constructed paleomagnetic profiles for the Carmel area (on the top of the accumulative surface of the Lower Cretaceous traps), and the Kinnarot Valley - Sea of Galilee - Hula Basin, evidently indicate the complex history of the paleogeodynamic evolution of the region. These studies demonstrate the effectiveness of paleomagnetic mapping interated with paleomagnetic profiling, which crosses these geologically complex areas.
Abstract: The eastern Mediterranean is a tectonically complex region evolving in the long term located in the midst of the progressive Afro-Eurasian collision. Despite years of investigation, its geological-geophysical structure is not completely known. At the same time, the recent discovery of large gas deposits has attracted the attention of many researchers to this region. For instance, the latest U. S. Geological Survey estimates using conventional assessment methodology suggest that there are on the order of 1.7 billion barrels of recoverable oil and more than 4 trillion m3 of recoverable gas in the Levant Basin [1]. This highlights the need for analysis of the paleogeographical conditions that can yield deep paleotectonic criteria for oil and gas discovery in this region. For this purpose, isopach maps of the Middle-Upper Jurassic and Lower Cretaceous were generated from detailed examinations of numerous well sections and the most significant outcroppings in the eastern Mediterranean. The maps confirm an earlier model of continental accretion [2]. In particular, abrupt changes in the trend and thickness of the Early Mesozoic formations coincide with the terrane boundaries. These compiled isopach maps also pinpoint significant distinctions between the Arabian and Sinai plates on the one hand and the Syrian arc on the other. A new tectonic map of the eastern Mediterranean is presented that first of all integrates geophysical satellite-derived gravity and airborne magnetic fields, as well as tectonic-structural, paleogeographical and facial analyses. The results have clear implications for hydrocarbon prospecting in this region.
Geochimica et Cosmochimica Acta, in press available 78p.
Mantle
Bulk chemistry
Abstract: The composition of the fine-grained matrix of glacial diamictites from the Mesoarchean, Paleoproterozoic, Neoproterozoic, and Paleozoic, collected from four modern continents, reflect the secular evolution of the average composition of the upper continental crust (UCC). The effects of localized provenance are present in some cases, but distinctive geochemical signatures exist in diamictites of the same age from different localities, suggesting that these are global signatures. Archean UCC, dominated by greenstone basalts and less so komatiites, was more mafic, based on major elements and transition metal trace elements. Temporal changes in oxygen isotope ratios, rare earth elements, and high field strength elements indicate that the UCC became more differentiated and that tonalite-trondhjemite-granodiorite suites became less important with time, findings consistent with previous studies. We also document the concentrations of siderophile and chalcophile elements (Ga, Ge, Cd, In, Sn, Sb, W, Tl, Bi) and lithophile Be in the UCC through time, and use the data for the younger diamictites to construct a new estimate of average UCC along with associated uncertainties.
Petrology of P-5 and P-13 kimberlites from Lattavaram kimberlite cluster, Wajrakarur kimberlite field, Andhra Pradesh, India: reclassification as lamproites.
Proceedings of the 10th. International Kimberlite Conference, Vol. 1, Special Issue of the Journal of the Geological Society of India,, Vol. 1, pp. 183-194.
Abstract: The P-12 "para-kimberlite" from Wajrakarur consists of forsteritic olivine, Al-Na-poor diopside, Fe-Ti-rich, Al-poor phlogopite, K-Ti-richterite, spinel, perovskite, cymrite, apatite, barite, Ba-Sr- bearing calcite, gittinsite, witherite, strontianite, and hydrogrossular (hydrogarnet). The rock also contains small clasts consisting dominantly of calcite, with lesser Ba-Sr-bearing calcite, cymrite, barite, strontianite, witherite, apatite, and hydrogrossular. Two generations of forsteritic olivine (Fo80-93) crystals are present: common phenocrystal-to-microphenocrystal; and rare anhedral macrocrystic olivines. Phlogopite occurs as microphenocrysts and as groundmass poikilitic plates with inclusions of spinel, perovskite, apatite, and chlorite pseudomorphs (after pyroxene). Phlogopites also occur as reaction rims around olivine crystals. The phlogopites have extremely low Al2O3 (2.2-3.8 wt.%), moderate-to-high FeO (6.9-16 wt.%), TiO2(1.9-4.6 wt.%), and Na2O (0.4-2.7 wt.%) contents and are enriched in fluorine (up to 6.0 wt.%) and considered to be tetraferriphlogopite. The pyroxenes occur in five parageneses as: (1) phenocrysts and microphenocrysts; (2) small slender crystals(<30 µm) forming part of the groundmass; (3) the cores of richterite crystals; (4) reaction products replacing earlier-formed olivine; (5) acicular crystals mantling carbonate clasts. These pyroxenes do not differ significantly in composition and are all diopsides with minor variation in their TiO2, Al2O3, Na2O contents. Titanian-potassium richterite commonly occurs as: (1) groundmass poikilitic plates; (2) small prismatic crystals (<30 µm); (3) reaction rims on olivine and pyroxene crystals. Groundmass poikilitic richterites commonly enclose pyroxene and apatite. Perovskites have a bimodal size distribution. Small (<20 µm) euhedral perovskites are scattered throughout the groundmass, whereas larger (100-300 µm) subhedral-to-euhedral perovskites are patchily-zoned and commonly broken. Micro-clasts consisting of accumulations of perovskite with phlogopite and apatite are also present. Spinels occur as large atoll crystals and small (<20 µm), euhedral-to-subhedral crystals, scattered throughout the groundmass. Some small spinel crystals are also present in the rims of olivine and pyroxene crystals. Atoll spinels are up to 100 µm in size, commonly with single and double cores. Atoll spinels are typically associated with perovskites. The euhedral-to-subhedral small spinels are ulvospinels. The atoll spinels have cores of titanian aluminous magnesiochromite with rims of magnesian titaniferous magnetite. The spinels have compositions which evolve along the lamproite-spinel compositional trend. Zoned calcite crystals occur as residual phases. Late stage residual calcite and carbonate clasts host prismatic cymrite crystals which are interpreted as pseudomorphs after potassium feldspar and/or barite. Subhedral-to-euhedral gittinsite and its Sr-analog are reported for the first time from the groundmass carbonate-chlorite mesostasis of a lamproite. Square-to-rectangular crystals of cymrite and hydrogrossular occur in the carbonate clasts and groundmass material. Barite anhedra commonly occur in the carbonate clasts together with witherite, strontianite, and Ba-Sr-bearing calcite. The texture and compositions of olivine, phlogopite, spinel, and K-Ti-richterite, together with the presence of cymrite pseudomorphs, possibly after potassium feldspar, demonstrate that this intrusion is a bona fide olivine lamproite and not a kimberlite. It is postulated that this, and other lamproites, located adjacent to the Eastern Ghats Mobile Belt, are derived by extensional decompressional melting of ancient subduction zones underlying the cratonic regions.
Abstract: Lamproites are mineralogically complex rocks and their bulk rock geochemistry is not for characterization of their parental magmas (Mitchell and Bergman, [1]). Characterization is best accomplished by consideration of their typomorphic mineralogy. We have investigated nine dykes from Vattikod (VL1:Vl8 and VL10). The mineral assemblage and their compositions are comparable to those of lamproites in terms of the presence of phlogopite (Ti-rich, Al-poor phlogopite and tetraferriphlogopite); amphiboles (potassic-arfvedsonite, potassic-richterite, potassic-ferro-richterite, potassic-katophorite, Ti- rich potassic-katophorite, Ti-rich potassic-magnesio-katophorite); Al-poor pyroxene; feldspars (K- feldspar, Ba-K-feldspar and Na-feldspar), spinels (chromite-magnetite and qandilite-ulvÖspinel-ZnFe2O4). These dykes have also undergone varied degrees of deuteric alteration as shown by the development of secondary phases such as titanite, allanite, hydro-zircon, calcite, chlorite, quartz and cryptocrystalline SiO2. We have classified the Vattikod dyke on the basis of their typomorphic major mineralogy in conjunction with alteration affects as: Group 1 (VL1); Group 2 (VL2 and VL3); Group 3 (VL4 and VL5); Group 4 (VL6, VL7 and VL8); and Group 5 (VL10). Group 2 dykes are pseudoleucite-amphibole-lamproite; Group 3 dykes are pseudoleucite-phlogopite-lamproite; Group 4 dykes are pseudoleucite-phlogopite- amphibole-lamproite. The Group 1 dyke is completely altered and the precursor mineralogy cannot be identified. Group 5 dyke is also extensively altered but contains fresh euhedral apatite microphenocrysts together with pseudomorphs after leucite and is classified as a pseudoleucite-apatite-(phlogopite?) lamproite. It is suggested that the Vattikod lamproites represent a spectrum of modal variants of lamproite produced by the differentiation and crystallization of a common parental peralkaline potassic magma. The near-linear disposition of Deformed Alkaline Rocks and Carbonatites commonly known as DARC’s (Burke and Khan, [2]) and lamproites in eastern India implies a relationship with subduction-related processes (Das Sharma & Ramesh, [3]; Gurmeet Kaur & Mitchell, [4]). We propose that the Vattikod and other lamproites in eastern India emplaced at 1100-1450 Ma are possible manifestations of subduction- related alkaline magmatism along the Eastern Ghats Mobile Belt, in contrast to extension-related anorogenic lamproite magmatism related to supercontinent(s) break-up as has been suggested for Ramadugu and other Dharwar Craton lamproites.
Abstract: The mineralogy of nine recently discovered dykes (VL1:VL8 and VL10) in the vicinity of Vattikod village, Nalgonda district in Telangana State is described. The mineral assemblage present and their compositions are comparable to those of bona fide lamproites in terms of the presence of phlogopite (Ti-rich, Al-poor phlogopite and tetraferriphlogopite); amphiboles (potassic-arfvedsonite, potassic-richterite, potassic-ferro-richterite, potassic-katophorite, Ti-rich potassic-katophorite, Ti-rich potassic-magnesio-katophorite); Al-poor clinopyroxenes; feldspars (K-feldspar, Ba-K-feldspar and Na-feldspar) and spinels (chromite-magnetite and qandilite-ulvöspinel-franklinite). These dykes have undergone diverse and significant degrees of deuteric alteration as shown by the formation of secondary phases such as: titanite, allanite, hydro-zircon, calcite, chlorite, quartz and cryptocrystalline SiO2. On the basis of their respective mineralogy: the VL4 and VL5 dykes are classified as pseudoleucite-phlogopite lamproite; VL2 and VL3 dykes as pseudoleucite-amphibole-lamproite; and VL6, VL7 and VL8 as pseudoleucite-phlogopite-amphibole-lamproite. VL10 is extensively altered but contains fresh euhedral apatite microphenocrysts together with pseudomorphs after leucite and is classified as a pseudoleucite-apatite-(phlogopite?) lamproite. The mineralogy of the Vattikod lamproite dykes is compared with that of the Ramadugu, Somavarigudem and Yacharam lamproite dykes which also occur in the Ramadugu lamproite field. The lamproites from the Eastern Dharwar Craton are considered as being possible expressions of ancient subduction-related alkaline magmatism along the Eastern Ghats mobile belt.
Abstract: We describe the mineralogy of a lamproite dyke from Gundrapalli village (Nalgonda district), Telangana, India. The dyke consists of a mineral assemblage characteristic of lamproites in terms of the presence of amphiboles (mainly potassic-richterite together with potassic-arfvedsonite, magnesio-riebeckite, Ti-rich potassic-magnesio-arfvedsonite, potassic-magnesio-arfvedsonite, katophorite and potassic-ferri-katophorite), Al-poor pyroxene, phlogopite (Ti-rich, Al-poor), pseudomorphed leucite, spinel (chromite-magnesiochromite), fluoroapatite, barite, titanite, rutile, baritocalcite, calcite, ilmenite, hydro-zircon, baotite, strontianite, allanite, quartz and pyrite. The absence of wadeite and priderite have been compensated for by presence of baotite, rutile, titanite, barite, and hydro-zircons. The presence of the secondary phases: allanite, hydro-zircon, chlorite, quartz, and cryptocrystalline silica, implies that the dyke has undergone deuteric alteration. The Gundrapalli dyke on the basis of its typomorphic mineralogy has been classified as a pseudoleucite-phlogopite-amphibole-lamproite. We report the presence of the rare mineral baotite from this lamproite, the first recognition of baotite from a lamproite in India. The mineralogy of the baotite- bearing Gundrapalli lamproite is analogous to the baotite- bearing Kvaløya lamproite from Troms, Norway. Ultrapotassic magmatism is quite prevalent in the Eastern Dharwar Complex of south India. Numerous new finds of lamproite dykes from and around the Palaeo-Mesoproterozoic Cuddapah basin gives an opportunity to understand the nature of the subcontinental lithospheric mantle in southern India. We present the mineralogy of a newly discovered lamproite dyke at Gundrapalli village (Nalgonda district) northwest of Cuddapah basin (Figure 1 inset). The lamproite dyke at Gundrapalli village, intruded into the Paleoproterozoic biotite granite unit of Peninsular Gneissic Complex form part of eastern Dharwar Complex. (Figure 1; Kumar et al., 2013, Ahmed et al., 2012).
Abstract: The mechanisms that result in the formation of high-pressure (HP) and ultrahigh-pressure (UHP) rocks are controversial. The usual interpretation assumes that pressure is close to lithostatic, petrological pressure estimates can be transferred to depth, and (U)HP rocks have been exhumed from great depth. An alternative explanation is that pressure can be larger than lithostatic, particularly in continental collision zones, and (U)HP rocks could thus have formed at shallower depths. To better understand the mechanical feasibility of these hypotheses, we performed thermomechanical numerical simulations of a typical subduction and collision scenario. If the subducting crust is laterally homogeneous and has small effective friction angles (and is thus weak), we reproduce earlier findings that <20% deviation of lithostatic pressure occurs within a subduction channel. However, many orogenies involve rocks that are dry and strong, and the crust is mechanically heterogeneous. If these factors are taken into account, simulations show that pressures can be significantly larger than lithostatic within nappe-size, mechanically strong crustal units, or within a strong lower crust, as a result of tectonic deformation. Systematic simulations show that these effects are most pronounced at the base of the crust (at ?40 km), where pressures can reach 2-3 GPa (therefore within the coesite stability field) for millions of years. These pressures are often released rapidly during ongoing deformation. Relating metamorphic pressure estimates to depth might thus be problematic in mechanically heterogeneous crustal rock units that appear to have been exhumed in an ultrafast manner.
Abstract: Self-consistent geodynamic modeling that includes melting is challenging as the chemistry of the source rocks continuously changes as a result of melt extraction. Here, we describe a new method to study the interaction between physical and chemical processes in an uprising heterogeneous mantle plume by combining a geodynamic code with a thermodynamic modeling approach for magma generation and evolution. We pre-computed hundreds of phase diagrams, each of them for a different chemical system. After melt is extracted, the phase diagram with the closest bulk rock chemistry to the depleted source rock is updated locally. The petrological evolution of rocks is tracked via evolving chemical compositions of source rocks and extracted melts using twelve oxide compositional parameters. As a result, a wide variety of newly generated magmatic rocks can in principle be produced from mantle rocks with different degrees of depletion. The results show that a variable geothermal gradient, the amount of extracted melt and plume excess temperature affect the magma production and chemistry by influencing decompression melting and the depletion of rocks. Decompression melting is facilitated by a shallower lithosphere-asthenosphere boundary and an increase in the amount of extracted magma is induced by a lower critical melt fraction for melt extraction and/or higher plume temperatures. Increasing critical melt fractions activates the extraction of melts triggered by decompression at a later stage and slows down the depletion process from the metasomatized mantle. Melt compositional trends are used to determine melting related processes by focusing on K2O/Na2O ratio as indicator for the rock type that has been molten. Thus, a step-like-profile in K2O/Na2O might be explained by a transition between melting metasomatized and pyrolitic mantle components reproducible through numerical modeling of a heterogeneous asthenospheric mantle source. A potential application of the developed method is shown for the West Eifel volcanic field.
Geochemistry, Geophysics, Geosystems, Vol. 20, 4, pp. 1679-1697.
Mantle
plate tectonics
Abstract: It has been believed that early Earth featured higher mantle temperature. The mantle temperature affects the geodynamic processes, and, therefore, the production of the continental crust, which has been a stable environment for the developing of life since Earth's infancy. However, our knowledge of the processes operating during the early Earth is still not definitive. The wide range of the mantle temperature estimation (from 1500 to 1600 °C) hampered our ability to understand early Earth's dynamic and geological data alone cannot provide a definitive answer. Therefore, it is necessary to integrate them with numerical modeling. Our contribution conjugates petrological modeling with thermal?mechanical simulations to unveil the effect of continental crust production. Continental crust's extraction from partially melted hydrated basalts leaves behind dense rocks that sink into the mantle dragging part of surface hydrated rocks. These drips produce a major compositional change of the mantle and promote the production of new basaltic/continental crust. The combination of these processes cools the mantle, suggesting that it could not have been extremely hot for geological timescales. We show that such processes can be active even in a relatively cool mantle (1450-1500 °C), providing new constraints to understand the infancy of our planet.
Abstract: Many Archean terranes are interpreted to have a tectonic and metamorphic evolution that indicates intra-crustal reorganization driven by lithospheric-scale gravitational instabilities. These processes are associated with the production of a significant amount of felsic and mafic crust, and are widely regarded to be a consequence of plume-lithosphere interactions. The juvenile Archean felsic crust is made predominantly of rocks of the tonalite-trondhjemite-granodiorite (TTG) suite, which are the result of partial melting of hydrous metabasalts. The geodynamic processes that have assisted the production of juvenile felsic crust, are still not well understood. Here, we perform 2D and 3D numerical simulations coupled with the state-of-the-art of petrological thermodynamical modelling to study the tectonic evolution of a primitive Archean oceanic plateau with particular regard on the condition of extraction of felsic melts. In our numerical simulations, the continuous emplacement of new, dry mafic intrusions and the extraction of the felsic melts, generate an unstable lower crust which drips into the mantle soon after the plume arrival. The subsequent tectonic evolution depends on the asthenosphere TP. If the TP is high enough (? 1500 ?C) the entire oceanic crust is recycled within 2 Myrs. By contrast at low TP, the thin oceanic plateau slowly propagates generating plate-boundary like features.
The dynamics of kimberlite magma intrusions: the role of dykes.
Vancouver Kimberlite Cluster, Oct. 16, 1/4p. Abstract
Global
magmatism
Abstract: Eruptions of kimberlite magma are often characterised by explosive activity, creating a conical-shaped cavity at the surface that tapers down to the underlying volcanic plumbing system. This diatreme is infilled by largely fragmented rock and ash, potentially having sampled up to 200 km of lithospheric material, and with diamondiferous mantle nodules ending up in close proximity to shallow crustal lithics. A kimberlite eruption would inevitably be something to see, and yet (as is the case with all volcanoes) it is ultimately the dynamics of the subsurface dykes and sills that feed the eruption which are responsible for what material reaches the surface. In this seminar I will present some geological observations of fossil kimberlite dykes from South Africa and explore how scaled analogue experiments in the laboratory can be used to reconstruct their dynamics of intrusion.
Journal of Volcanology and Geothermal Research, Vol. 354, pp. 87-101.
Mantle
magmatism
Abstract: Volcanic eruptions are fed by plumbing systems that transport magma from its source to the surface, mostly fed by dykes. Here we present laboratory experiments that model dyke ascent to eruption using a tank filled with a crust analogue (gelatine, which is transparent and elastic) that is injected from below by a magma analogue (dyed water). This novel experimental setup allows, for the first time, the simultaneous measurement of fluid flow, sub-surface and surface deformation during dyke ascent. During injection, a penny-shaped fluid-filled crack is formed, intrudes, and traverses the gelatine slab vertically to then erupt at the surface. Polarised light shows the internal stress evolution as the dyke ascends, and an overhead laser scanner measures the surface elevation change in the lead-up to dyke eruption. Fluorescent passive-tracer particles that are illuminated by a laser sheet are monitored, and the intruding fluid's flow dynamics and gelatine's sub-surface strain evolution is measured using particle image velocimetry and digital image correlation, respectively. We identify 4 previously undescribed stages of dyke ascent. Stage 1, early dyke growth: the initial dyke grows from the source, and two fluid jets circulate as the penny-shaped crack is formed. Stage 2, pseudo-steady dyke growth: characterised by the development of a rapidly uprising, central, single pseudo-steady fluid jet, as the dyke grows equally in length and width, and the fluid down-wells at the dyke margin. Sub-surface host strain is localised at the head region and the tail of the dyke is largely static. Stage 3, pre-eruption unsteady dyke growth: an instability in the fluid flow appears as the central fluid jet meanders, the dyke tip accelerates towards the surface and the tail thins. Surface deformation is only detected in the immediate lead-up to eruption and is characterised by an overall topographic increase, with axis-symmetric topographic highs developed above the dyke tip. Stage 4 is the onset of eruption, when fluid flow is projected outwards and focused towards the erupting fissure as the dyke closes. A simultaneous and abrupt decrease in sub-surface strain occurs as the fluid pressure is released. Our results provide a comprehensive physical framework upon which to interpret evidence of dyke ascent in nature, and suggest dyke ascent models need to be re-evaluated to account for coupled intrusive and extrusive processes and improve the recognition of monitoring signals that lead to volcanic eruptions in nature.
Evolution of silicocrbonatite parental magmas to form the Phalaborwa igneous complex: a complex history of melting of multiple mantle sources, magma mingling, differentiation and magmatic exsolution.
Earth and Planetary Science Letters, Vol. 547, 9p. Pdf
Mantle
perovskite
Abstract: The thermal conductivity of post-perovskite (ppv), the highest-pressure polymorph of MgSiO3 in the Earth's mantle, is one of the most important transport properties for providing better constraints on the temperature profile and dynamics at the core-mantle boundary (CMB). Incorporation of Fe into ppv can affect its conductivity, which has never been experimentally investigated. Here we determined the lattice thermal conductivities of ppv containing 3 mol% and 10 mol% of Fe at high P-T conditions - of pressures up to 149 GPa and 177 GPa, respectively, and temperatures up to 1560 K - by means of the recently developed pulsed light heating thermoreflectance technique combining continuous wave heating lasers. We found that the incorporation of Fe into ppv moderately reduces its lattice thermal conductivity as it increases the Fe content. The bulk conductivity of ppv dominant pyrolite is estimated as 1.5 times higher than that of pyrolite consisting of bridgmanite and ferropericlase in the lower mantle, which agrees with the traditional view that ppv acts as a better heat conductor than bridgmanite in the Earth's lowermost mantle.
Akaogi, M., Kawahara, A., Kojitani, H., Yoshida, K., Anegawa, Y., Ishii, T.
High pressure phase transitions in MgCr2O4 MgSiO4 composition: reactions between olivine and chromite with implications for ultrahigh pressure chromitites.
Intricate heterogeneous structures of the top 300 km of the Earth's inner core inferred from global array data.II. Frequency dependence of inner core attentuation and its implication.
Earth and Planetary Science Letters, Vol. 405, Nov. pp. 231-243.
Geochemistry, Vol. 80, doi.org/10.1016 /j.chemer.2019 .04.002 5p. Pdf
Russia
deposit - Khibiny
Abstract: This article presents an analysis of the influences of nature and production factors relating to the chemical-mineralogical composition of products that formed at the stages of mining and processing apatite-nepheline ores in the Khibiny Mountain Massif. It is shown that all main production processes are connected to the formation of dump waste products that are subject to further changes under the influence of exogenous factors, which include conditions of outdoor storage in dumps and sludge accumulators. According to the dead tails (stale tails) of apatite production, the characteristic changes in the chemical-mineralogical composition and grain-size distribution are determined and have a significant effect on the indicators of their mineral processing. The experimental study of dead tails includes processing a set of technological operations, and their flowsheets are also determined. These flowsheets provide a nepheline concentrate of the required composition with indicators no worse than when processing the tailings of the current composition. It is shown that the existing flowsheets for apatite or nepheline concentrate processing lead to the accumulation of significant amounts of mulls associated with the separation of less valuable components of raw materials into the dump waste products, including calcium and silica. The experimental work also demonstrates the conversion process of gypsum wastes produced during the production of phosphoric acid and shows the importance of additional hydrochemical treatment of belite mull to achieve an economically justified ratio of the main and by-products in the processing of aluminosilicate raw materials.
Yoshikawa, M., Kawamoto, T., Shibata, T., Yamamoto, J.
Geochemical and Sr Nd isotopic characteristics and pressure temperature estimates of mantle xenoliths from French Massif Central: metasomatism and carbonatites..
Geological Society of London Special Publication, No. 337, pp. 153-175.
Martin, A.M., Laporte, D., Koga, K.T., Kawamoto, T., Hammouda, T.
Experimental study of the stability of a dolomite + coesite assemblage in contact with peridotite: implications for sediment-mantle interaction and diamond formation during subduction.
Martin, A.M., Laporte, D., Koga, K.T., Kawamoto, T., Hammouda, T.
Experimental stidy of the stability of a dolomite + coesite assembalge in contact with peridotite: implications for sediment-mantle interaction and diamond formation during subduction.
Abstract: The use of drones in mining environments is one way in which data pertaining to the state of a site in various industries can be remotely collected. This paper proposes a combined system that employs a 6-bands multispectral image capturing camera mounted on an Unmanned Aerial Vehicle (UAV) drone, Spectral Angle Mapping (SAM), as well as Artificial Intelligence (AI). Depth possessing multispectral data were captured at different flight elevations. This was in an attempt to find the best elevation where remote identification of magnetite iron sands via the UAV drone specialized in collecting spectral information at a minimum accuracy of +/? 16 nm was possible. Data were analyzed via SAM to deduce the cosine similarity thresholds at each elevation. Using these thresholds, AI algorithms specialized in classifying imagery data were trained and tested to find the best performing model at classifying magnetite iron sand. Considering the post flight logs, the spatial area coverage of 338 m2, a global classification accuracy of 99.7%, as well the per-class precision of 99.4%, the 20 m flight elevation outputs presented the best performance ratios overall. Thus, the positive outputs of this study suggest viability in a variety of mining and mineral engineering practices.
Proterozoic crustal evolution at the southern margin of the Amazonian craton in the state of Mato Grosso, Brasil: evidence from rubidium-strontium (Rb-Sr) and K-Ar data
Precambrian Research, Vol. 59, No. 3-4, December pp. 263-282
Abstract: Extensive partial melting of the middle to lower crustal parts of orogens, such as of the current Himalaya-Tibet orogen, significantly alters their rheology and imposes first-order control on their tectonic and topographic evolution. We interpret the late Proterozoic Araçuaí orogen, formed by the collision between the São Francisco (Brazil) and Congo (Africa) cratons, as a deep section through such a hot orogen based on U-Pb sensitive high-resolution ion microprobe (SHRIMP) zircon ages and Ti-in-zircon and Zr-in-rutile temperatures from the Carlos Chagas anatectic domain. This domain is composed of peraluminous anatexites and leucogranites that typically exhibit interconnected networks of garnet-rich leucosomes or a magmatic foliation. Zirconium-in-rutile temperatures range from 745 to 820 °C, and the average Ti-in-zircon temperature ranges from 712 to 737 °C. The geochronologic and thermometry data suggest that from 597 to 572 Ma this domain was partially molten and remained so for at least 25 m.y., slowly crystallizing between temperatures of ?815 and >700 °C. Significant crustal thickening must have occurred prior to 600 Ma, with initial continental collision likely before 620 Ma, a time period long enough to heat the crust to temperatures required for widespread partial melting at middle crustal levels and to favor a "channel flow" tectonic behavior.
Crystallographic preferred orientation of wadsleyite and ringwoodite: effects of phase transformation and water on seismic anisotropy in the mantle transition zone.
Earth and Planetary Science Letters, Vol. 397, pp. 133-144.
Abstract: As the most abundant solid phase at depths of 410-525 km, wadsleyite constitutes a large geochemical reservoir in the Earth. To better understand the implications of minor element substitution and cation ordering in wadsleyite, we have synthesized wadsleyites coexisting with pyroxenes with 2-3 wt% of either TiO2, Cr2O3, V2O3, CoO, NiO, or ZnO under hydrous conditions in separate experiments at 1300 °C and 15 GPa. We have refined the crystal structures of these wadsleyites by single-crystal X-ray diffraction, analyzed the compositions by electron microprobe, and estimated M3 vacancy concentration from b/a cell-parameter ratios. According to the crystal structure refinements, Cr and V show strong preferences for M3 over M1 and M2 sites and significant substitution up to 2.9 at% at the tetrahedral site (T site). Ni, Co, and Zn show site preferences similar to those of Fe with M1? M3 > M2 > T. The avoidance of Ni, Co, and Fe for the M2 site in both wadsleyite and olivine appears to be partially controlled by crystal field stabilization energy (CFSE). The estimated CFSE values of Ni2+, Co2+, and Zn2+ at three distinct octahedral sites show a positive correlation with octahedral occupancy ratios [M2/(M1+M3)]. Ti substitutes primarily into the M3 octahedron, rather than M1, M2, or T sites. Ti, Cr, and V each have greater solubility in wadsleyite than in olivine. Therefore these transition metal cations may be enriched in a melt or an accessory phase if hydrous melting occurs on upward convection across the wadsleyite-olivine boundary and may be useful as indicators of high-pressure origin.
Contributions to Mineralogy and Petrology, 10.1007/ s00410-018-1478-x 10p.
Mantle
melting
Abstract: Ni, Co, and Zn are widely distributed in the Earth’s mantle as significant minor elements that may offer insights into the chemistry of melting in the mantle. To better understand the distribution of Ni2+, Co2+, and Zn2+ in the most abundant silicate phases in the transition zone and the upper mantle, we have analyzed the crystal chemistry of wadsleyite (Mg2SiO4), ringwoodite (Mg2SiO4), forsterite (Mg2SiO4), and clinoenstatite (Mg2Si2O6) synthesized at 12-20 GPa and 1200-1400 °C with 1.5-3 wt% of either NiO, CoO, or ZnO in starting materials. Single-crystal X-ray diffraction analyses demonstrate that significant amounts of Ni, Co, and Zn are incorporated in octahedral sites in wadsleyite (up to 7.1 at%), ringwoodite (up to 11.3 at%), olivine (up to 2.0 at%), and clinoenstatite (up to 3.2 at%). Crystal structure refinements indicate that crystal field stabilization energy (CFSE) controls both cation ordering and transition metal partitioning in coexisting minerals. According to electron microprobe analyses, Ni and Co partition preferentially into forsterite and wadsleyite relative to coexisting clinoenstatite. Ni strongly prefers ringwoodite over coexisting wadsleyite with DRw/WdNi?=?4.13. Due to decreasing metal-oxygen distances with rising pressure, crystal field effect on distribution of divalent metal ions in magnesium silicates is more critical in the transition zone relative to the upper mantle. Analyses of Ni partitioning between the major upper-mantle phases implies that Ni-rich olivine in ultramafic rocks can be indicative of near-primary magmas.
Earth and Planetary Science Letters, Vol. 498, pp. 77-87.
Mantle
geophysics - seismic
Abstract: Earth's transition zone at depths between 410 km and 660 km plays a key role in Earth's deep water cycle since large amounts of hydrogen can be stored in the nominally anhydrous minerals wadsleyite and ringwoodite, . Previous mineral physics experiments on iron-free wadsleyite proposed low seismic velocities as an indicative feature for hydration in the transition zone. Here we report simultaneous sound wave velocity and density measurements on iron-bearing wadsleyite single crystals with 0.24 wt-% . By comparison with earlier studies, we show that pressure suppresses the velocity reduction caused by higher degrees of hydration in iron-bearing wadsleyite, ultimately leading to a velocity cross-over for both P-waves and S-waves. Modeling based on our experimental results shows that wave speed variations within the transition zone as well as velocity jumps at the 410-km seismic discontinuity, both of which have been used in previous work to detect mantle hydration, are poor water sensors. Instead, the impedance contrast across the 410-km seismic discontinuity that is reduced in the presence of water can serve as a more robust indicator for hydrated parts of the transition zone.
Earth and Planetary Science Letters, Vol. 498, pp. 9-16.
Mantle
water
Abstract: Ringwoodite, the dominant mineral at depths between 520 km and 660 km, can store up to 2-3 wt.% of water in its crystal structure, making the Earth's transition zone a plausible water reservoir that plays a central role in Earth's deep water cycle. Experiments show that hydration of ringwoodite significantly reduces elastic wave velocities at room pressure, but the effect of pressure remains poorly constrained. Here, a novel experimental setup enables a direct quantification of the effect of hydration on ringwoodite single-crystal elasticity and density at pressures of the Earth's transition zone and high temperatures. Our data show that the hydration-induced reduction of seismic velocities almost vanishes at conditions of the transition zone. Seismic data thus agree with a wide range of water contents in the transition zone.
Abstract: The Earth’s mantle is characterized by a sharp seismic discontinuity at a depth of 660?km that can provide insights into deep mantle processes. The discontinuity occurs over only 2?km—or a pressure difference of 0.1?GPa—and is thought to result from the post-spinel transition, that is, the decomposition of the mineral ringwoodite to bridgmanite plus ferropericlase. Existing high-pressure, high-temperature experiments have lacked the pressure control required to test whether such sharpness is the result of isochemical phase relations or chemically distinct upper and lower mantle domains. Here, we obtain the isothermal pressure interval of the Mg-Fe binary post-spinel transition by applying advanced multi-anvil techniques with in situ X-ray diffraction with the help of Mg-Fe partition experiments. It is demonstrated that the interval at mantle compositions and temperatures is only 0.01?GPa, corresponding to 250?m. This interval is indistinguishable from zero at seismic frequencies. These results can explain the discontinuity sharpness and provide new support for whole-mantle convection in a chemically homogeneous mantle. The present work suggests that distribution of adiabatic vertical flows between the upper and lower mantles can be mapped on the basis of discontinuity sharpness.
European Journal of Mineralogy, Vol. 30, 1, pp. 61-76.
Russia
meteorites
Abstract: Impact diamonds were discovered in the 70s and are usually accepted as being paramorphs after graphite, resulting in grains of extremely high mechanical quality. A diffusion-less mechanism for the graphite-to-diamond transition under huge pressure has been experimentally realized and theoretically explained. Besides, another type of impact product has received much less attention, namely diamonds formed after coal as a result of the impact. Here we describe after-coal impact diamonds from the giant Kara astrobleme (Pay-Khoy, Russia), which resulted from a large asteroid impact about 70?Ma ago. The impact created a large number of unusual impact diamonds, which are described here for the first time using high-resolution techniques including visible and UV Raman spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM). Two main varieties of after-coal diamonds occur: micrograined (sugar-like, subdivided into coherent and friable) and, as a new type, paramorphs after organic relics. After-coal diamonds differ from after-graphite impact diamonds by the texture, the absence of lonsdaleite, a micro- and nanoporous structure. The sugar-like variety consists of tightly aggregated, well-shaped single nanocrystals. The after-organic diamond paramorphs are characterized by a well-preserved relict organic morphology, sub-nanocrystalline-amorphous sp3-carbon (ta-C) nanocomposites and other specific properties (optical transparence, brown color, very high luminescence, spectral features). Based on the description of after-coal diamonds, we propose a new, polystage formation mechanism: high-velocity coal pyrolysis with hetero-elements removal followed by diffusion-limited crystallization of pure carbon. The similarity of the after-coal diamonds features with carbonado is a strong piece of evidence in support of the impact hypothesis for the origin of carbonado.
Geology of the upper Paleozoic diamond bearing formations ofTunguskasyneclise. Cyclicity of sedimentation processes and correlation ofprofiles.(Russian)
Transactions of the Institute of Institute Geologiya i Geofizika Akademii Nauk, Vol. 646 pp. 140-159
Doklady Earth Sciences, Vol. 494, 1, pp. 699-703. pdf
South America, Brazil
hydrogen
Abstract: The volumetric concentration of hydrogen in two Brazilian diamonds is determined using secondary ion mass spectrometry and implantation of hydrogen into an external standard sample (with a dose of 1 × 16 at/cm2 and energy of 120 KeV). The diamonds studied differ noticeably in their intensities of IR-active hydrogen from 0 to 1.5 cm-1 according to the analyses of their IR spectra. The results demonstrate that for both samples studied, the volumetric concentration of hydrogen does not exceed the reached detectable level of (1-2) × 1018 at/cm3 or 1.7-3.3 at. ppm; i.e., it is lower by an order of magnitude than in the early chemical analysis and by 2-3 orders of magnitude lower than the results of the ion-beam spectrochemical, nuclear-physical, and ERDA analyses. Only a part of the hydrogen forms optically active impurities in diamond crystals and can be determined by spectral methods.
Mineralogy and geochemistry of island arc picrites, as illustrated by an example from the southern part of the Olyutorskaya zone of the KoryakHighlands
Doklady Academy of Sciences USSR, Earth Science Section, Vol. 306, No. 3, pp. 148-152
Mollex, G., France, L., Furi, E., Bonnet, R., Botcharnikov, R.E., Zimmermann, L., Wilke, S., Deloule, E., Chazot, G., Kazimoto. E.O., Marty, B., Burnard, P.
Abstract: Cognate xenoliths that have been emitted during the last sub-plinian eruption in 2007-08 at Oldoinyo Lengai (OL) represent a unique opportunity to document the igneous processes occuring within the active magma chamber. Detailed petrographic descriptions coupled to a thermobarometric approach, and to the determination of volatile solubility models, allow us to identify the melt evolution at magma chamber conditions, and the storage parameters (P, T). Results indicate that a fresh phonolite melt (~1060°C) was injected into a crustal magma chamber at 11.5 ±3.5 km depth, in agreement with geophysical surveys performed during the eruption. The phonolite contains high volatile contents: 3.2 wt.% H2O and 1.4 wt.% CO2. The liquid line of descent highlights an evolution to nephelinite compositions by cooling down to 880°C. Our results support previous results related to this eruption, and are similar to the historical products emitted during the whole volcano history, allowing us to suggest that no major modification in the plumbing system has occured during the OL evolution. New noble gas results show that: i. fumaroles display constant He isotopic signature since 1988; ii. Cognate xenoliths documenting the active magma chamber and fumaroles display similar He isotopic values (6.58±0.46RA, and 7.31±0.40RA, respectively); iii. OL He isotopic composition is similar to that of other silicate volcanoes of the Arusha region, and comparable to the typical subcontinental lithospheric mantle (SCLM) range (5.2 to 7.0 RA); iv. Ne isotopic ratio of OL is following the MORB signature. Those results are interpreted as showing that 1/ no major modification in the hydrothermal system architecture has occured since 1988 despite major modification of the summit crater morphology, 2/ no contamination by either the atmospheric gases, or crustal material assimilation has occured between the magma chamber and the surface, and 3/ the source of OL and of the other silicate volcanoes in the Arusha region is a SCLM metasomatized by asthenospheric fluids.
Researchgate preprint Istanbul Technical University , 18p. Pdf
Global
diamond morphology
Abstract: Point defects are responsible for a wide range of optoelectronic properties in materials, making it crucial to engineer their concentrations for novel materials design. However, considering the plethora of defects in co-doped semiconducting and dielectric materials and the dependence of defect formation energies on heat treatment parameters, process design based on an experimental trial and error approach is not an efficient strategy. This makes it necessary to explore computational pathways for predicting defect equilibria during heat treatments. The accumulated experimental knowledge on defect transformations in diamond is unparalleled. Therefore, diamond is an excellent material for benchmarking computational approaches. By considering nitrogen, hydrogen, and silicon doped diamond as a model system, we have investigated the pressure dependence of defect formation energies and calculated the defect equilibria during heat treatment of diamond through ab-initio calculations. We have plotted monolithic-Kröger-Vink diagrams for various defects, representing defect concentrations based on process parameters, such as temperature and partial pressure of gases used during heat treatments of diamond. The method demonstrated predicts the majority of experimental data, such as nitrogen aggregation path leading towards the formation of the B center, annealing of the B, H3, N3, and NVHx centers at ultra high temperatures, the thermal stability of the SiV center, and temperature dependence of NV concentration. We demonstrate the possibility of designing heat treatments for a wide range of semiconducting and dielectric materials by using a relatively inexpensive yet robust first principles approach, significantly accelerating defect engineering and high-throughput novel materials design.
Diamond & Related Materials, doi.1016/j.diamond.2018.11.018 30p.
Russia
synthetics
Abstract: Defect transformations in type Ib synthetic diamond annealed at a temperature of 1870?°C under stabilizing pressure (HPHT annealing) and in hydrogen atmosphere at normal pressure (LPHT annealing) are compared. Spectroscopic data obtained on the samples before and after annealing prove that the processes of nitrogen aggregation and formation of nitrogen?nickel complexes are similar in both cases. Essential differences between HPHT and LPHT annealing are stronger graphitization at macroscopic imperfections and enhanced lattice distortions around point defects in the latter case. The lattice distortion around point defects is revealed as a considerable broadening of zero-phonon lines of “soft” (vacancy-related) optical centers. It was found that LPHT annealing may enhance overall intensity of luminescence of HPHT-grown synthetic diamonds.
Abstract: Single crystal CVD diamond has been grown on (100)-oriented CVD diamond seed in six layers to a total thickness of 4.3 mm, each layer being grown in gas with increasing concentration of nitrogen. The nitrogen doping efficiency, distribution of color and internal stress have been studied by SIMS, optical absorption, Raman spectroscopy and birefringence imaging. It is shown that nitrogen doping is very non-uniform. This non-uniformity is explained by the terraced growth of CVD diamond. The color of the nitrogen-doped diamond is grayish-brown with color intensity gradually increasing with nitrogen concentration. The absorption spectra are analyzed in terms of two continua representing brown and gray color components. The brown absorption continuum exponentially rises towards short wavelength. Its intensity correlates with the concentration of nitrogen C-defects. Small vacancy clusters are discussed as the defects responsible for the brown absorption continuum. The gray absorption continuum has weak and almost linear spectral dependence through the near infrared and visible spectral range. It is ascribed to carbon nanoclusters which may form in plasma and get trapped into growing diamond. It is suggested that Mie light scattering on the carbon nanoclusters substantially contributes to the gray absorption continuum and determines its weak spectral dependence. A Raman line at a wavenumber of 1550 cm?1 is described as a characteristic feature of the carbon nanoclusters. The striation pattern of brown/gray color follows the pattern of anomalous birefringence suggesting that the vacancy clusters and carbon inclusions are the main cause of internal stress in CVD diamond. A conclusion is made that high perfection of seed surface at microscale is not a required condition for growth of low-stress, low-inclusion single crystal CVD diamond. Crystallographic order at macroscale is more important requirement for the seed surface.
Abstract: Single crystal CVD diamond has been grown on (100)-oriented CVD diamond seed in six layers to a total thickness of 4.3 mm, each layer being grown in gas with increasing concentration of nitrogen. The nitrogen doping efficiency, distribution of color and internal stress have been studied by SIMS, optical absorption, Raman spectroscopy and birefringence imaging. It is shown that nitrogen doping is very non-uniform. This non-uniformity is explained by the terraced growth of CVD diamond. The color of the nitrogen-doped diamond is grayish-brown with color intensity gradually increasing with nitrogen concentration. The absorption spectra are analyzed in terms of two continua representing brown and gray color components. The brown absorption continuum exponentially rises towards short wavelength. Its intensity correlates with the concentration of nitrogen C-defects. Small vacancy clusters are discussed as the defects responsible for the brown absorption continuum. The gray absorption continuum has weak and almost linear spectral dependence through the near infrared and visible spectral range. It is ascribed to carbon nanoclusters which may form in plasma and get trapped into growing diamond. It is suggested that Mie light scattering on the carbon nanoclusters substantially contributes to the gray absorption continuum and determines its weak spectral dependence. A Raman line at a wavenumber of 1550 cm?1 is described as a characteristic feature of the carbon nanoclusters. The striation pattern of brown/gray color follows the pattern of anomalous birefringence suggesting that the vacancy clusters and carbon inclusions are the main cause of internal stress in CVD diamond. A conclusion is made that high perfection of seed surface at microscale is not a required condition for growth of low-stress, low-inclusion single crystal CVD diamond. Crystallographic order at macroscale is more important requirement for the seed surface.
Diamond & Related Materials, Vol. 113, 108255, 7p. Pdf
Global
luminescence
Abstract: Detailed study of the luminescence of multiple brown CVD diamonds was performed. It has been found that the well-known optical center with zero-phonon line at 468 nm is a characteristic of brown color. It has been found that the defects responsible for 468 nm center are located within brown striations suggesting close relation of the 468 nm center and the vacancy clusters. Simultaneous reduction of the intensity of 468 nm center and brown color during annealing support the assumption of their close relation. Identical spectroscopic parameters of the 468 nm center and the radiation center with ZPL at 492 nm suggest that the former relates to an intrinsic defect probably containing vacancies. The distribution of intensity of the 468 nm center in some brown diamonds follows the distribution of the NV? center while being opposite to that of the NV0 center and the dislocation-related A-band. This observation suggests the negative charge state of the 468 nm center. Due to its high luminescence efficiency, the 468 nm center can be used as a highly sensitive indicator of the traces of vacancy clusters. We found that the 468 nm center is detected practically in every as-grown CVD diamond including colorless CVD diamonds of high structural perfection and high purity.
Diamond & Related Materials, Vol. 113, 108255, 7p. Pdf
Global
luminescence
Abstract: Detailed study of the luminescence of multiple brown CVD diamonds was performed. It has been found that the well-known optical center with zero-phonon line at 468 nm is a characteristic of brown color. It has been found that the defects responsible for 468 nm center are located within brown striations suggesting close relation of the 468 nm center and the vacancy clusters. Simultaneous reduction of the intensity of 468 nm center and brown color during annealing support the assumption of their close relation. Identical spectroscopic parameters of the 468 nm center and the radiation center with ZPL at 492 nm suggest that the former relates to an intrinsic defect probably containing vacancies. The distribution of intensity of the 468 nm center in some brown diamonds follows the distribution of the NV? center while being opposite to that of the NV0 center and the dislocation-related A-band. This observation suggests the negative charge state of the 468 nm center. Due to its high luminescence efficiency, the 468 nm center can be used as a highly sensitive indicator of the traces of vacancy clusters. We found that the 468 nm center is detected practically in every as-grown CVD diamond including colorless CVD diamonds of high structural perfection and high purity.
Diamond & Related Materials, doi.1016/j.diamond.2018.11.018 30p.
Russia
synthetics
Abstract: Defect transformations in type Ib synthetic diamond annealed at a temperature of 1870?°C under stabilizing pressure (HPHT annealing) and in hydrogen atmosphere at normal pressure (LPHT annealing) are compared. Spectroscopic data obtained on the samples before and after annealing prove that the processes of nitrogen aggregation and formation of nitrogen?nickel complexes are similar in both cases. Essential differences between HPHT and LPHT annealing are stronger graphitization at macroscopic imperfections and enhanced lattice distortions around point defects in the latter case. The lattice distortion around point defects is revealed as a considerable broadening of zero-phonon lines of “soft” (vacancy-related) optical centers. It was found that LPHT annealing may enhance overall intensity of luminescence of HPHT-grown synthetic diamonds.
Abstract: Single crystal CVD diamond has been grown on (100)-oriented CVD diamond seed in six layers to a total thickness of 4.3 mm, each layer being grown in gas with increasing concentration of nitrogen. The nitrogen doping efficiency, distribution of color and internal stress have been studied by SIMS, optical absorption, Raman spectroscopy and birefringence imaging. It is shown that nitrogen doping is very non-uniform. This non-uniformity is explained by the terraced growth of CVD diamond. The color of the nitrogen-doped diamond is grayish-brown with color intensity gradually increasing with nitrogen concentration. The absorption spectra are analyzed in terms of two continua representing brown and gray color components. The brown absorption continuum exponentially rises towards short wavelength. Its intensity correlates with the concentration of nitrogen C-defects. Small vacancy clusters are discussed as the defects responsible for the brown absorption continuum. The gray absorption continuum has weak and almost linear spectral dependence through the near infrared and visible spectral range. It is ascribed to carbon nanoclusters which may form in plasma and get trapped into growing diamond. It is suggested that Mie light scattering on the carbon nanoclusters substantially contributes to the gray absorption continuum and determines its weak spectral dependence. A Raman line at a wavenumber of 1550 cm?1 is described as a characteristic feature of the carbon nanoclusters. The striation pattern of brown/gray color follows the pattern of anomalous birefringence suggesting that the vacancy clusters and carbon inclusions are the main cause of internal stress in CVD diamond. A conclusion is made that high perfection of seed surface at microscale is not a required condition for growth of low-stress, low-inclusion single crystal CVD diamond. Crystallographic order at macroscale is more important requirement for the seed surface.
Abstract: Single crystal CVD diamond has been grown on (100)-oriented CVD diamond seed in six layers to a total thickness of 4.3 mm, each layer being grown in gas with increasing concentration of nitrogen. The nitrogen doping efficiency, distribution of color and internal stress have been studied by SIMS, optical absorption, Raman spectroscopy and birefringence imaging. It is shown that nitrogen doping is very non-uniform. This non-uniformity is explained by the terraced growth of CVD diamond. The color of the nitrogen-doped diamond is grayish-brown with color intensity gradually increasing with nitrogen concentration. The absorption spectra are analyzed in terms of two continua representing brown and gray color components. The brown absorption continuum exponentially rises towards short wavelength. Its intensity correlates with the concentration of nitrogen C-defects. Small vacancy clusters are discussed as the defects responsible for the brown absorption continuum. The gray absorption continuum has weak and almost linear spectral dependence through the near infrared and visible spectral range. It is ascribed to carbon nanoclusters which may form in plasma and get trapped into growing diamond. It is suggested that Mie light scattering on the carbon nanoclusters substantially contributes to the gray absorption continuum and determines its weak spectral dependence. A Raman line at a wavenumber of 1550 cm?1 is described as a characteristic feature of the carbon nanoclusters. The striation pattern of brown/gray color follows the pattern of anomalous birefringence suggesting that the vacancy clusters and carbon inclusions are the main cause of internal stress in CVD diamond. A conclusion is made that high perfection of seed surface at microscale is not a required condition for growth of low-stress, low-inclusion single crystal CVD diamond. Crystallographic order at macroscale is more important requirement for the seed surface.
Lithospheric and asthenospheric sources of lamprophyres in the Jiadong Peninsula: a consequence of rapid lithospheric thinning beneath the North Chin a craton?
Geochimica et Cosmochimica Acta, Vol. 124, pp. 250-271.
Minerals MDPI, Vol. 10, 1117, doi:10.3390/ min10121117 20p. Pdf
China
deposit - Bayan Obo
Abstract: The Bayan Obo rare earth element (REE) deposit in Inner Mongolia, northern China, is the largest REE deposit in the world, whose mineralization process remains controversial. There are dozens of carbonatite dykes that are tightly related to the deposit. Here we report the petrological and mineralogical characteristics of a typical dolomite carbonatite dyke near the deposit. The dolomite within the dyke experienced intense post-emplacement fluids metasomatism as evidenced by the widespread hydrothermal REE-bearing minerals occurring along the carbonate mineral grains. REE contents of bulk rocks and constituent dolomite minerals (>90 vol.%) are 1407-4184 ppm and 63-152 ppm, respectively, indicating that dolomite is not the dominant mineral controlling the REE budgets of the dyke. There are three types of apatite in the dyke: Type 1 apatite is the primary apatite and contains REE2O3 at 2.35-4.20 wt.% and SrO at 1.75-2.19 wt.%; Type 2 and Type 3 apatites are the products of replacement of primary apatite. The REE2O3 (6.10-8.21 wt.%) and SrO (2.83-3.63 wt.%) contents of Type 2 apatite are significantly elevated for overprinting of REE and Sr-rich fluids derived from the carbonatite. Conversely, Type 3 apatite has decreased REE2O3 (1.17-2.35 wt.%) and SrO (1.51-1.99 wt.%) contents, resulting from infiltration of fluids with low REE and Na concentrations. Our results on the dyke suggest that post-magmatic fluids expelled from the carbonatitic melts dominated the REE mineralization of the Bayan Obo deposit, and a significant fluid disturbance occurred but probably provided no extra REEs to the deposit.
Abstract: In October 2017, a natural diamond overgrown by a thick layer of CVD synthetic diamond was identified at the Beijing laboratory of the National Gemstone Testing Center (NGTC). The round-brilliant-cut sample was near-colourless and weighed 0.11 ct. No sign of the overgrowth was observed with magnification. However, DiamondView images showed a distinct boundary in the pavilion separating layers of different luminescence: The upper layer displayed red fluorescence with greenish blue phosphorescence, while the lower portion showed deep blue fluorescence and no phosphorescence. Infrared spectroscopy revealed that the upper layer was type IIa and the lower portion was type Ia. Ultraviolet-visible-near infrared (UV-Vis-NIR) spectroscopy recorded an unusual co-existence of the N3 centre at 415 nm together with absorption due to [Si-V]-defects at 737 nm. The photoluminescence (PL) spectrum confirmed a high level of [Si-V]-defects. The approximate thickness of the CVD synthetic layer was ~740 µm, which is much thicker than previously reported for such overgrowths. The presence of the N3 centre in the natural diamond layer caused this sample to be passed as natural by various screening instruments. Luminescence imaging is key to identifying such overgrowths, and should be relied upon more heavily in the screening procedures used by gemmological laboratories in the future.
Neues Jahrbuch fur Mineralogie, Vol. 195, pp. 145-153.
Australia
deposit - Argyle
Abstract: Contact twinning with the so-called "macle" form or other shapes are often found in natural diamond crystals. However, the surface microtopographic features associated with twinning have been less investigated. Here, the surface dissolution and growth features seen on the twin boundaries, including the re-entrant angles revealed by differential interference contrast microscope and SEM techniques in 170 natural diamond crystals mainly from Argle mine, Australia are described and summarized. The hexagonal pits, rhombic pits along with higher symmetry observed at the twin boundaries together with dislocations and their formation processes are discussed.
Gems & Gemology, Sixth International Gemological Symposium Vol. 54, 3, 1p. Abstract p. 268.
China
synthetics
Abstract: China is the world’s largest producer of HPHT-grown industrial diamonds. Its 2016 production of about 20 billion carats accounted for 98% of the global supply. Since the beginning of 2015, meleesized colorless HPHT synthetic diamonds have been tested at the National Gemstone Testing Center’s (NGTC) Shenzhen and Beijing laboratories in parcels submitted by different clients, which means that colorless HPHT synthetic diamonds have entered the Chinese jewelry market and may be mistaken for natural diamonds. CVD synthesis technology has grown rapidly in recent years. Large colorless and colored (blue, pink) CVD-grown diamonds have been entering the market, and a few have been fraudulently sold as natural diamonds. China has independently developed gem-grade HPHT synthetic diamond production technology since 2002, and can grow gem-grade type Ib, IIa, and IIb and high-nitrogen-content synthetic diamonds in volume, depending on market needs. Gemgrade type Ib, IIa, and IIb HPHT synthetic diamonds have been grown using the temperature gradient method, under a cubic press at high pressure (e.g., 5.4 GPa) and high temperature (1300-1600°C). Driven by a specific temperature gradient, the carbon source from high-purity graphite (>99.9%) located at the high-temperature zone can diffuse into the seed crystals in the cubic press, resulting in the crystallization of synthetic diamonds. Chinese production of melee-sized colorless to near-colorless HPHT synthetic diamonds accounts for about 90% of the global output. Gem-grade type IIa and IIb CVD synthetic diamonds are grown using the microwave plasma chemical vapor deposition (MPCVD) and direct current (DC) arc plasma methods. Faceted colorless CVD diamonds can be grown in sizes up to 6 ct by at least two Chinese companies (table 1). After testing and analyzing thousands of natural and synthetic diamonds collected directly from the Chinese companies, NGTC independently developed the GV5000, PL5000, DS5000, and ADD6000 instruments for rapidly screening and identifying the diamonds based on the gemological characteristics obtained. Besides HPHT and CVD synthetic diamonds, a thickly layered hybrid diamond consisting of both natural and CVD material was identified at the NGTC Beijing laboratory (figure 1). The identification features and properties of regrown CVD synthetic diamonds using natural type Ia diamond crystals as seeds will be reported. The current status and features of colored stones examined at NGTC laboratories, including several cases studies, will be discussed.
Abstract: Gemmological and spectroscopic characteristics are reported for two type IIa blue CVD synthetic diamonds from Huzhou SinoC Semiconductor Science and Technology Co. Ltd, China. These are the first relatively large (1.76 and 2.63 ct) blue CVD synthetics examined in NGTC’s laboratories, and their colour was slightly brighter than other blue synthetic diamonds that we have encountered. In the DiamondView, they fluoresced blue (with purple-red in one sample), which is unusual for CVD synthetics. The mid- and near-IR absorption spectra of one sample showed no hydrogen-related features, while the other synthetic diamond showed a weak absorption at 6853 cm?1attributed to hydrogen. The spectra of both samples had a very weak line at 1332 cm?1 due to isolated nitrogen and a distinct band at 9282 cm-1 related to radiation. A very strong GR1 absorption feature was detected by UV-Vis-NIR spectroscopy. Photoluminescence spectra obtained at liquid-nitrogen temperature recorded emissions related to radiation (mainly in the 480-510 nm region), N-V and [Si-V]- centres, and several unassigned weak emissions. This combination of optical centres strongly suggests that these samples underwent post-growth treatment to improve their transparency before they were irradiated to produce blue colouration.
Mineralogy and Petrology, Vol. 111, 3, pp. 373-381.
Africa, Tanzania
mineralogy
Abstract: Jörgkellerite, ideally Na3Mn3+ 3(PO4)2(CO3)O2•5H2O, is a new layered phosphate-carbonate from the Oldoinyo Lengai volcano in the Gregory Rift (northern Tanzania). The mineral occurs as spherulites, up to 200 ?m in diameter, consisting of plates up to 10 ?m in thickness in shortite-calcite and calcite carbonatites. Jörgkellerite is brown with a vitreous lustre and has a perfect micaceous cleavage on {001}, Mohs hardness is 3. The calculated density is 2.56 g/cm3. Jörgkellerite is uniaxial (-), ? = 1.700(2), ? = 1.625(2) (Na light, 589 nm) with distinct pleochroism: O = dark brown, E = light brown. The empirical formula of the mineral (average of 10 electron microprobe analyses) is (Na2.46K0.28Ca0.08Sr0.04Ba0.02)?2.88(Mn3+ 2.39Fe3+ 0.56)?2.95((PO4)1.95(SiO4)0.05))?2.00(CO3)(O1.84(OH)0.16)?2.00•5H2O. The oxidation state of Mn has been determined by XANES. Jörgkellerite is trigonal, space group P-3, a = 11.201(2) Å, c = 10.969(2) Å, V = 1191.9(7) Å3 and Z = 3. The five strongest powder-diffraction lines [d in Å, (I/I o), (hkl)] are: 10.970 (100) (001), 5.597 (15) (002), 4.993 (8) (111), 2.796 (14) (220) and 2.724 (20) (004). The crystal structure is built up of the layers composed of disordered edge-sharing [MnO6] octahedra. Each fourth Mn site in octahedral layer is vacant that results in appearance of ordered system of hexagonal "holes" occupied by (CO3) groups. The overall composition of the layer can be expressed as [Mn3O8(CO3)]. These manganese-carbonate layers are linked in the third dimension by (PO4) tetrahedra and Na-polyhedra. The origin of jörgkellerite is related to low-temperature oxidative alteration of gregoryite-nyerereite carbonatites.
Abstract: Igneous intrusions, notably carbonatitic-alkalic intrusions, peralkaline intrusions, and pegmatites, represent significant sources of rare-earth metals. Geophysical exploration for and of such intrusions has met with considerable success. Examples of the application of the gravity, magnetic, and radiometric methods in the search for rare metals are presented and described. Ground gravity surveys defining small positive gravity anomalies helped outline the shape and depth of the Nechalacho (formerly Lake) deposit within the Blatchford Lake alkaline complex, Northwest Territories, and of spodumene-rich mineralization associated with the Tanco deposit, Manitoba, within the hosting Tanco pegmatite. Based on density considerations, the bastnaesite-bearing main ore body within the Mountain Pass carbonatite, California, should produce a gravity high similar in amplitude to those associated with the Nechalacho and Tanco deposits. Gravity also has utility in modelling hosting carbonatite intrusions, such as the Mount Weld intrusion, Western Australia, and Elk Creek intrusion, Nebraska. The magnetic method is probably the most successful geophysical technique for locating carbonatitic-alkalic host intrusions, which are typically characterized by intense positive, circular to sub-circular, crescentic, or annular anomalies. Intrusions found by this technique include the Mount Weld carbonatite and the Misery Lake alkali complex, Quebec. Two potential carbonatitic-alkalic intrusions are proposed in the Grenville Province of Eastern Quebec, where application of an automatic technique to locate circular magnetic anomalies identified several examples. Two in particular displayed strong similarities in magnetic pattern to anomalies accompanying known carbonatitic or alkalic intrusions hosting rare-metal mineralization and are proposed to have a similar origin. Discovery of carbonatitic-alkalic hosts of rare metals has also been achieved by the radiometric method. The Thor Lake group of rare-earth metal deposits, which includes the Nechalacho deposit, were found by follow-up investigations of strong equivalent thorium and uranium peaks defined by an airborne survey. Prominent linear radiometric anomalies associated with glacial till in the Canadian Shield have provided vectors based on ice flow directions to source intrusions. The Allan Lake carbonatite in the Grenville Province of Ontario is one such intrusion found by this method. Although not discovered by its radiometric characteristics, the Strange Lake alkali intrusion on the Quebec-Labrador border is associated with prominent linear thorium and uranium anomalies extending at least 50 km down ice from the intrusion. Radiometric exploration of rare metals hosted by pegmatites is evaluated through examination of radiometric signatures of peraluminous pegmatitic granites in the area of the Tanco pegmatite.
Geophysical Prospecting, Vol. 64, 5, pp. 1275-1304.
Geophysics
Abstract: Igneous intrusions, notably carbonatitic-alkalic intrusions, peralkaline intrusions, and pegmatites, represent significant sources of rare-earth metals. Geophysical exploration for and of such intrusions has met with considerable success. Examples of the application of the gravity, magnetic, and radiometric methods in the search for rare metals are presented and described. Ground gravity surveys defining small positive gravity anomalies helped outline the shape and depth of the Nechalacho (formerly Lake) deposit within the Blatchford Lake alkaline complex, Northwest Territories, and of spodumene-rich mineralization associated with the Tanco deposit, Manitoba, within the hosting Tanco pegmatite. Based on density considerations, the bastnaesite-bearing main ore body within the Mountain Pass carbonatite, California, should produce a gravity high similar in amplitude to those associated with the Nechalacho and Tanco deposits. Gravity also has utility in modelling hosting carbonatite intrusions, such as the Mount Weld intrusion, Western Australia, and Elk Creek intrusion, Nebraska. The magnetic method is probably the most successful geophysical technique for locating carbonatitic-alkalic host intrusions, which are typically characterized by intense positive, circular to sub-circular, crescentic, or annular anomalies. Intrusions found by this technique include the Mount Weld carbonatite and the Misery Lake alkali complex, Quebec. Two potential carbonatitic-alkalic intrusions are proposed in the Grenville Province of Eastern Quebec, where application of an automatic technique to locate circular magnetic anomalies identified several examples. Two in particular displayed strong similarities in magnetic pattern to anomalies accompanying known carbonatitic or alkalic intrusions hosting rare-metal mineralization and are proposed to have a similar origin. Discovery of carbonatitic-alkalic hosts of rare metals has also been achieved by the radiometric method. The Thor Lake group of rare-earth metal deposits, which includes the Nechalacho deposit, were found by follow-up investigations of strong equivalent thorium and uranium peaks defined by an airborne survey. Prominent linear radiometric anomalies associated with glacial till in the Canadian Shield have provided vectors based on ice flow directions to source intrusions. The Allan Lake carbonatite in the Grenville Province of Ontario is one such intrusion found by this method. Although not discovered by its radiometric characteristics, the Strange Lake alkali intrusion on the Quebec-Labrador border is associated with prominent linear thorium and uranium anomalies extending at least 50 km down ice from the intrusion. Radiometric exploration of rare metals hosted by pegmatites is evaluated through examination of radiometric signatures of peraluminous pegmatitic granites in the area of the Tanco pegmatite.
Geological Association of Canada (GAC)/Mineralogical Association of Canada (MAC)/SEG Annual Meeting May 27-29. Toronto, Ontario, Abstract, Vol. 16, p. A63. Abstract
Formation of platiniferous sulfide horizons by crystal fractionation and magma mixing in the Munni Munni layered intrusion, west Pilbara block, WesternAustralia
Economic Geology, Vol. 84, No. 7, November pp. 1775-1804
Abstract: The composition of the early Earth’s atmosphere is believed to result from significant magma outgassing during the Archaean eon. It has been widely debated whether the oxygen fugacity (fo2) of the Earth’s mantle has remained constant over the last ~3.8 Ga to levels where volatiles were mostly in their mobile form [1,2], or whether the mantle has experienced a gradual increase of its redox state [3]. Both hypotheses raise fundamental questions on the effect of composition of the early Earth’s accreting material, the origin and availability of primordial carbon in Earth’s interior, and the migration rate of CO2-rich magmas. In addition, the occurrence in nature of carbonatites (or silicate-carbonatitic rocks), diamonds and carbides indicate a dominant control of the mantle redox state on the volatile speciation over time and, maybe, on mechanisms of their formation, reaction and migration through the silicate mantle. A recent model has been developed that combines both experimental results on the fo2 of preserved carbonaceous chondrites at high pressure and thermodynamic predictions of the the temporal variation of the mantle redox state, with the CO2-bearing magmas that could form in the early asthenospheric mantle. Since any variation in melt composition is expected to cause significant changes in the physical properties (e.g., viscosity and density), the migration rate of these magmas has been determined using recent in situ viscosity data on CO2-rich melts with the falling sphere technique. Our results allow determining the composition of CO2- bearing magmas as function of the increasing mantle redox state over time, and the mechanisms and rate for exchange of carbon between mantle reservoirs.
Abstract: A review of the compositional features of Tunisia, Algeria, and Morocco phosphorites is proposed in order to assess and compare the paleoenvironmental conditions that promoted the deposit formation as well as provide information about their economic perspective in light of growing worldwide demand. Since these deposits share a very similar chemical and mineralogical composition, the attention was focused on the geochemistry of rare earth elements (REEs) and mostly on ?REEs, Ce and Eu anomalies, and (La/Yb) and (La/Gd) normalized ratios. The REEs distributions reveal several differences between deposits from different locations, suggesting mostly that the Tunisian and Algerian phosphorites probably were part of the same depositional system. There, sub-reducing to sub-oxic conditions and a major REEs adsorption by early diagenesis were recorded. Conversely, in the Moroccan basins, sub-oxic to oxic environments and a minor diagenetic alteration occurred, which was likely due to a different seawater supply. Moreover, the drastic environmental changes associated to the Paleocene-Eocene Thermal Maximum event probably influenced the composition of Northern African phosphorites that accumulated the highest REEs amounts during that span of time. Based on the REEs concentrations, and considering the outlook coefficient of REE composition (Koutl) and the percentage of critical elements in ?REEs (REEdef), the studied deposits can be considered as promising to highly promising REE ores and could represent a profitable alternative source for critical REEs.
Russian Geology and Geophysics, Vol. 63, 3, pp. 245-254.
Russia
deposit - Nakyn
Abstract: The paper presents the results of studies of diamonds from Early Jurassic sediments making up the Nyurbinskoe buried placer of the Nakyn kimberlite field, unique in diamond reserves. The main task is to identify diamond distribution patterns in the deposits of the Dyakhtar Stratum (lower deposit) and the Ukugut Suite (upper deposit) within the placer. A comparative analysis of the typomorphic features of diamonds from the upper and lower deposits of the placer was carried out. Variations in the contents of crystals with certain properties that form the image of a diamond-bearing geologic object have been revealed. The zonal distribution of diamonds by characteristics in sedimentary deposits, regardless of their age, has been established. The properties of diamonds and their associations change within the placer, which is due to their redeposition during the Early Jurassic sedimentation.
Abstract: Whether subduction initiation is a forced or spontaneous process is a fundamental geological problem. Using drill core data from the Amami Sankaku basin, Arculus et al.1 suggest that subduction in the Izu–Bonin–Mariana arc began spontaneously. Here we argue that the evidence presented favours neither spontaneous nor forced
Keepler, H., Dubrovinsky, L.S., Narygina, O., Kantor, I.
Optical absorption and radioactive thermal conductivity silicate perovskite to 125 Gpa at high pressures, silicate perovskite, abundant in Earth's mantle....
Science, Vol. 322, 5907 Dec. 5, pp. 1529-1531.
Mantle
Geothermometry Radioactive heat important in deep Earth
Geochemistry, Geophysics, Geosystems: G3, in press available
Technology
geophsyics - magnetics
Abstract: Remanent magnetization in geological samples may record the past intensity and direction of planetary magnetic fields. Traditionally, this magnetization is analyzed through measurements of the net magnetic moment of bulk millimeter to centimeter sized samples. However, geological samples are often mineralogically and texturally heterogeneous at submillimeter scales, with only a fraction of the ferromagnetic grains carrying the remanent magnetization of interest. Therefore, characterizing this magnetization in such cases requires a technique capable of imaging magnetic fields at fine spatial scales and with high sensitivity. To address this challenge, we developed a new instrument, based on nitrogenvacancy centers in diamond, which enables direct imaging of magnetic fields due to both remanent and induced magnetization, as well as optical imaging, of room-temperature geological samples with spatial resolution approaching the optical diffraction limit. We describe the operating principles of this device, which we call the quantum diamond microscope (QDM), and report its optimized image-area-normalized magnetic field sensitivity (20 µT?µm/Hz½), spatial resolution (5 µm), and field of view (4 mm), as well as trade-offs between these parameters. We also perform an absolute magnetic field calibration for the device in different modes of operation, including three-axis (vector) and single-axis (projective) magnetic field imaging. Finally, we use the QDM to obtain magnetic images of several terrestrial and meteoritic rock samples, demonstrating its ability to resolve spatially distinct populations of ferromagnetic carriers.
Earth and Planetary Science letters, Vol. 524, 115723 11p.
United States
tomography
Abstract: The leading hypothesis to explain 410 and 660 km discontinuity topography and coincident velocity variations is the thermal hypothesis stated as: temperature variations are the primary modulator of discontinuity topography and seismic velocity variations. To test the thermal hypothesis, discontinuity topography maps are correlated with coincident P- and S-velocity variations for the eastern half of the United States sampled by IRIS-EarthScope USArray seismic data. The discontinuity topography maps were made via common-conversion point migration of P-wave receiver functions. The receiver functions were made using a multi-event and multi-station deconvolution method. Fundamental to our results is the choice of three-dimensional P- and S-velocity models, which are used as migration velocity models and for correlation analysis. Two three-dimensional velocity models are used in our analysis: the MITS-model of Golos et al. (2018) and the SL-model of Schmandt and Lin (2014). The Pearson correlation coefficient is used to estimate the degree of linearity between the discontinuity topography and coincident velocity variations. A bivariate regression of discontinuity topography versus coincident velocity variations (termed the mineral physics slope) is performed and compared to a range of slopes constrained by published velocity-temperature derivatives and Clapeyron slopes. Using spatially binning, the discontinuity topography and coincident velocity variations, spatial maps of the correlation coefficient and mineral physics slope are made. Most of the discontinuity sampling area has reasonable correlation values (?0.4) and plausible mineral physics slope values. The veracity of the thermal hypothesis is assessed by integrating the probability density functions of the mineral physics slopes over a domain defined by the published range of 410 and 660 Clapeyron slopes. At the 410, the MITS-model and SL-model thermal hypothesis probabilities are 52% and 51%, respectively, and the seismic Clapeyron slope estimates are 2.7 and 1.3 MPa/K, respectively. At the 660, the MITS-model and SL-model thermal hypothesis probabilities are 54% and 75%, respectively and the seismic Clapeyron slope estimates are ?1.1 and ?1.7 MPa/K, respectively. These Clapeyron slopes estimates are in the middle of plausible Clapeyron slope ranges. Using these Clapeyron slopes, temperature maps show a ±300 K range at the 410 and a ±600 K range at the 660. For regions that are inconsistent with the thermal hypothesis, we suggest that the leading explanations are uncertainties in the velocity models used and secondarily, hydration effects.
Abstract: We investigate the along-axis variations in architecture, segmentation and evolution of the Main Ethiopian Rift (MER), East Africa, and relate these characteristics to the regional geology, lithospheric structure and surface processes. We first illustrate significant along-axis variations in basin architecture through analysis of simplified geological cross-sections in different rift sectors. We then integrate this information with a new analysis of Ethiopian topography and hydrography to illustrate how rift architecture (basin symmetry/asymmetry) is reflected in the margin topography and has been likely amplified by a positive feedback between tectonics (flexural uplift) and surface processes (fluvial erosion, unloading). This analysis shows that ~70% of the 500 km-long MER is asymmetric, with most of the asymmetric rift sectors being characterized by a master fault system on the eastern margin. We finally relate rift architecture and segmentation to the regional geology and geophysical constraints on the lithosphere. We provide strong evidence that rift architecture is controlled by the contrasting nature of the lithosphere beneath the homogeneous, strong Somalian Plateau and the weaker, more heterogeneous Ethiopian Plateau, differences originating from the presence of pre-rift zones of weakness on the Ethiopian Plateau and likely amplified by surface processes. The data provided by this integrated analysis suggest that asymmetric rifts may directly progress to focused axial tectonic-magmatic activity, without transitioning into a symmetric rifting stage. These observations have important implications for the asymmetry of continental rifts and conjugate passive margins worldwide.
Abstract: The Cenozoic East African rift (EAR), Cameroon Volcanic Line (CVL), and Atlas Mountains formed on the slow-moving African continent, which last experienced orogeny during the Pan-African. We synthesize primarily geophysical data to evaluate the role of magmatism in shaping Africa's crust. In young magmatic rift zones, melt and volatiles migrate from the asthenosphere to gas-rich magma reservoirs at the Moho, altering crustal composition and reducing strength. Within the southernmost Eastern rift, the crust comprises ~20% new magmatic material ponded in the lower crust and intruded as sills and dikes at shallower depths. In the Main Ethiopian Rift, intrusions comprise 30% of the crust below axial zones of dike-dominated extension. In the incipient rupture zones of the Afar rift, magma intrusions fed from crustal magma chambers beneath segment centers create new columns of mafic crust, as along slow-spreading ridges. Our comparisons suggest that transitional crust, including seaward dipping sequences, is created as progressively smaller screens of continental crust are heated and weakened by magma intrusion into 15-20 km thick crust. In the 30 Ma Recent CVL, which lacks a hot spot age progression, extensional forces are small, inhibiting the creation and rise of magma into the crust. In the Atlas orogen, localized magmatism follows the strike of the Atlas Mountains from the Canary Islands hot spot toward the Alboran Sea. CVL and Atlas magmatism has had minimal impact on crustal structure. Our syntheses show that magma and volatiles are migrating from the asthenosphere through the plates, modifying rheology, and contributing significantly to global carbon and water fluxes.
Abstract: Over the last few decades, significant advances in using geophysical techniques to image the structure of magma plumbing systems have enabled the identification of zones of melt accumulation, crystal mush development, and magma migration. Combining advanced geophysical observations with petrological and geochemical data has arguably revolutionised our understanding of, and afforded exciting new insights into, the development of entire magma plumbing systems. However, divisions between the scales and physical settings over which these geophysical, petrological, and geochemical methods are applied still remain. To characterise some of these differences and promote the benefits of further integration between these methodologies, we provide a review of geophysical techniques and discuss how they can be utilised to provide a structural context for and place physical limits on the chemical evolution of magma plumbing systems. For example, we examine how Interferometric Synthetic Aperture Radar (InSAR), coupled with Global Positioning System (GPS) and Global Navigation Satellite System (GNSS) data, and seismicity may be used to track magma migration in near real-time. We also discuss how seismic imaging, gravimetry, and electromagnetic data can identify contemporary melt zones, magma reservoirs, and, or, crystal mushes. These techniques complement seismic reflection data and rock magnetic analyses that delimit the structure and emplacement of ancient magma plumbing systems. For each of these techniques, with the addition of full-waveform inversion (FWI), the use of Unmanned Aerial Vehicles (UAVs), and the integration of geophysics with numerical modelling, we discuss potential future directions. We show that approaching problems concerning magma plumbing systems from an integrated petrological, geochemical, and geophysical perspective will undoubtedly yield important scientific advances, providing exciting future opportunities for the volcanological community.
Journal of Geophysical Research, Vol. 123, 7, pp. 5644-5660.
Africa, east Africa
geophysics - seismic
Abstract: Although the East African rift system formed in cratonic lithosphere above a large?scale mantle upwelling, some sectors have voluminous magmatism, while others have isolated, small?volume eruptive centers. We conduct teleseismic shear wave splitting analyses on data from 5 lake?bottom seismometers and 67 land stations in the Tanganyika?Rukwa?Malawi rift zone, including the Rungwe Volcanic Province (RVP), and from 5 seismometers in the Kivu rift and Virunga Volcanic Province, to evaluate rift?perpendicular strain, rift?parallel melt intrusion, and regional flow models for seismic anisotropy patterns beneath the largely amagmatic Western rift. Observations from 684 SKS and 305 SKKS phases reveal consistent patterns. Within the Malawi rift south of the RVP, fast splitting directions are oriented northeast with average delays of ~1 s. Directions rotate to N?S and NNW north of the volcanic province within the reactivated Mesozoic Rukwa and southern Tanganyika rifts. Delay times are largest (~1.25 s) within the Virunga Volcanic Province. Our work combined with earlier studies shows that SKS?splitting is rift parallel within Western rift magmatic provinces, with a larger percentage of null measurements than in amagmatic areas. The spatial variations in direction and amount of splitting from our results and those of earlier Western rift studies suggest that mantle flow is deflected by the deeply rooted cratons. The resulting flow complexity, and likely stagnation beneath the Rungwe province, may explain the ca. 17 Myr of localized magmatism in the weakly stretched RVP, and it argues against interpretations of a uniform anisotropic layer caused by large?scale asthenospheric flow or passive rifting.
Abstract: Unusually deep earthquakes occur beneath rift segments with and without surface expressions of magmatism in the East African Rift system. The Tanganyika rift is part of the Western rift and has no surface evidence of magmatism. The TANG14 array was deployed in the southern Tanganyika rift, where earthquakes of magnitude up to 7.4 have occurred, to probe crust and upper mantle structure and evaluate fault kinematics. Four hundred seventy?four earthquakes detected between June 2014 and September 2015 are located using a new regional velocity model. The precise locations, magnitudes, and source mechanisms of local and teleseismic earthquakes are used to determine seismogenic layer thickness, delineate active faults, evaluate regional extension direction, and evaluate kinematics of border faults. The active faults span more than 350 km with deep normal faults transecting the thick Bangweulu craton, indicating a wide plate boundary zone. The seismogenic layer thickness is 42 km, spanning the entire crust beneath the rift basins and their uplifted flanks. Earthquakes in the upper mantle are also detected. Deep earthquakes with steep nodal planes occur along subsurface projections of Tanganyika and Rukwa border faults, indicating that large offset (?5 km) faults penetrate to the base of the crust, and are the current locus of strain. The focal mechanisms, continuous depth distribution, and correlation with mapped structures indicate that steep, deep border faults maintain a half?graben morphology over at least 12 Myr of basin evolution. Fault scaling based on our results suggests that M > 7 earthquakes along Tanganyika border faults are possible.
Geochemistry, Geophysics, Geosystems, Vol. 20, 4, pp. 2091-2109.
Africa
geophysics
Abstract: In Ethiopia, the African Continent is rifting apart to slowly form a new ocean basin, which will expand the Red Sea and the Gulf of Aden. How and why this rifting is occurring remains an important unanswered question in earth science. We know tectonic forces are partly responsible, but magmatism also seems a key ingredient for breaking up Africa. Here we use seismic images obtained from signals pulled out of noise, to understand the crustal structure of the region; In particular, how and where magma is stored in the crust, and its relationship to the different stages of continental breakup visible in the region. We find evidence for long?term melt storage in places where rifting is just beginning in southern Ethiopia; whereas in regions where the crust is thinner due to extensive rifting, magma erupts more regularly. The long?term storage of magma in unrifted crust may help to heat and weaken it, allowing rifting to accelerate and propagate further south. We are also able to image regions with hydrothermal fluids in the shallow parts of the crust in inactive fault zones. These results provide insight into the breakup process and the role magma plays at different stages of rifting.
Nature Communications, doi.org/10.1038/s41467-019-11065-4 pdf 10p.
Mantle
subduction
Abstract: Ore deposits are loci on Earth where energy and mass flux are greatly enhanced and focussed, acting as magnifying lenses into metal transport, fractionation and concentration mechanisms through the lithosphere. Here we show that the metallogenic architecture of the lithosphere is illuminated by the geochemical signatures of metasomatised mantle rocks and post-subduction magmatic-hydrothermal mineral systems. Our data reveal that anomalously gold and tellurium rich magmatic sulfides in mantle-derived magmas emplaced in the lower crust share a common metallogenic signature with upper crustal porphyry-epithermal ore systems. We propose that a trans-lithospheric continuum exists whereby post-subduction magmas transporting metal-rich sulfide cargoes play a fundamental role in fluxing metals into the crust from metasomatised lithospheric mantle. Therefore, ore deposits are not merely associated with isolated zones where serendipitous happenstance has produced mineralisation. Rather, they are depositional points along the mantle-to-upper crust pathway of magmas and hydrothermal fluids, synthesising the concentrated metallogenic budget available.
Dissolution of diamond in kimberlitic melts at 7 and 9 GPa
Geological Association of Canada (GAC), Geological Association of Canada (GAC)/Mineralogical Association of Canada (MAC) Annual Meeting, Abstract, Abstract Vol. p. A109
Between ultramafic rock and fractionating basaltic magma 1. Phaserelations, the origin of calc-alkaline magma series and the formation of discordant dunite
Journal of Petrology, Vol. 31, No. 1, February pp. 51-134
Relative depletion of niobium in some arc magmas and the continental crust:partitioning of K, Nb, La, and Ce during melt/rock reaction in the uppermantle
Earth and Planetary Science Letters, Vol. 120, No. 3/4 December pp. 111-134
Mantle
Melt rock interaction, potassium, lanthanum, cerium
Abstract: The formation of the Earth's continents is enigmatic. Volcanic arc magmas generated above subduction zones have geochemical compositions that are similar to continental crust, implying that arc magmatic processes played a central role in generating continental crust. Yet the deep crust within volcanic arcs has a very different composition from crust at similar depths beneath the continents. It is therefore unclear how arc crust is transformed into continental crust. The densest parts of arc lower crust may delaminate and become recycled into the underlying mantle. Here we show, however, that even after delamination, arc lower crust still has significantly different trace element contents from continental lower crust. We suggest that it is not delamination that determines the composition of continental crust, but relamination. In our conceptual model, buoyant magmatic rocks generated at arcs are subducted. Then, upon heating at depth, they ascend and are relaminated at the base of the overlying crust. A review of the average compositions of buoyant magmatic rocks — lavas and plutons — sampled from the Aleutians, Izu-Bonin-Marianas, Kohistan and Talkeetna arcs reveals that they fall within the range of estimated major and trace elements in lower continental crust. Relamination may thus provide an efficient process for generating lower continental crust.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 167-205.
Mantle
Magmatism
Abstract: The composition of much of Earth's lower continental crust is enigmatic. Wavespeeds require that 10 -20% of the lower third is mafic, but the available heat-flow and wavespeed constraints can be satisfied if lower continental crust elsewhere contains anywhere from 49 to 62 wt% SiO2. Thus, contrary to common belief, the lower crust in many regions could be relatively felsic, with SiO2 contents similar to andesites and dacites. Most lower crust is less dense than the underlying mantle, but mafic lowermost crust could be unstable and likely delaminates beneath rifts and arcs. During sediment subduction, subduction erosion, arc subduction, and continent subduction, mafic rocks become eclogites and may continue to descend into the mantle, whereas more silica-rich rocks are transformed into felsic gneisses that are less dense than peridotite but more dense than continental upper crust. These more felsic rocks may rise buoyantly, undergo decompression melting and melt extraction, and be relaminated to the base of the crust. As a result of this refining and differentiation process, such relatively felsic rocks could form much of Earth's lower crust.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 363-404.
Mantle
Magmatism
Abstract: We review data and recent research on arc composition, focusing on the relatively complete arc crustal sections in the Jurassic Talkeetna arc (south central Alaska) and the Cretaceous Kohistan arc (northwest Pakistan), together with seismic data on the lower crust and uppermost mantle. Whereas primitive arc lavas are dominantly basaltic, the Kohistan crust is clearly andesitic and the Talkeetna crust could be andesitic. The andesitic compositions of the two arc sections are within the range of estimates for the major element composition of continental crust. Calculated seismic sections for Kohistan and Talkeetna provide a close match for the thicker parts of the active Izu arc, suggesting that it, too, could have an andesitic bulk composition. Because andesitic crust is buoyant with respect to the underlying mantle, much of this material represents a net addition to continental crust. Production of bulk crust from a parental melt in equilibrium with mantle olivine or pyroxene requires processing of igneous crust, probably via density instabilities. Delamination of dense cumulates from the base of arc crust, foundering into less dense, underlying mantle peridotite, is likely, as supported by geochemical evidence from Talkeetna and Kohistan. Relamination of buoyant, subducting material—during sediment subduction, subduction erosion, arcarc collision, and continental collision—is also likely.
Mineralogy and Petrology, 10.1007/ s00710-018- 0589-4, 14p.
Africa, South Africa, Canada, Northwest Territories, Ontario
deposit - Venetia, Voorspoed, Gahcho Kue, Victor, Snap Lake
Abstract: De Beers kimberlite mine operations in South Africa (Venetia and Voorspoed) and Canada (Gahcho Kué, Victor, and Snap Lake) have the potential to sequester carbon dioxide (CO2) through weathering of kimberlite mine tailings, which can store carbon in secondary carbonate minerals (mineral carbonation). Carbonation of ca. 4.7 to 24.0 wt% (average?=?13.8 wt%) of annual processed kimberlite production could offset 100% of each mine site’s carbon dioxide equivalent (CO2e) emissions. Minerals of particular interest for reactivity with atmospheric or waste CO2 from energy production include serpentine minerals, olivine (forsterite), brucite, and smectite. The most abundant minerals, such as serpentine polymorphs, provide the bulk of the carbonation potential. However, the detection of minor amounts of highly reactive brucite in tailings from Victor, as well as the likely presence of brucite at Venetia, Gahcho Kué, and Snap Lake, is also important for the mineral carbonation potential of the mine sites.
Abstract: The formation and preservation of cratons-the oldest parts of the continents, comprising over 60 per cent of the continental landmass-remains an enduring problem. Key to craton development is how and when the thick strong mantle roots that underlie these regions formed and evolved. Peridotite melting residues forming cratonic lithospheric roots mostly originated via relatively low-pressure melting and were subsequently transported to greater depth by thickening produced by lateral accretion and compression. The longest-lived cratons were assembled during Mesoarchean and Palaeoproterozoic times, creating the stable mantle roots 150 to 250 kilometres thick that are critical to preserving Earth’s early continents and central to defining the cratons, although we extend the definition of cratons to include extensive regions of long-stable Mesoproterozoic crust also underpinned by thick lithospheric roots. The production of widespread thick and strong lithosphere via the process of orogenic thickening, possibly in several cycles, was fundamental to the eventual emergence of extensive continental landmasses-the cratons.
Abstract: The Great Unconformity, a profound gap in Earth’s stratigraphic record often evident below the base of the Cambrian system, has remained among the most enigmatic field observations in Earth science for over a century. While long associated directly or indirectly with the occurrence of the earliest complex animal fossils, a conclusive explanation for the formation and global extent of the Great Unconformity has remained elusive. Here we show that the Great Unconformity is associated with a set of large global oxygen and hafnium isotope excursions in magmatic zircon that suggest a late Neoproterozoic crustal erosion and sediment subduction event of unprecedented scale. These excursions, the Great Unconformity, preservational irregularities in the terrestrial bolide impact record, and the first-order pattern of Phanerozoic sedimentation can together be explained by spatially heterogeneous Neoproterozoic glacial erosion totaling a global average of 3-5 vertical kilometers, along with the subsequent thermal and isostatic consequences of this erosion for global continental freeboard.
Abstract: Rock quantity and age are fundamental features of Earth's crust that pertain to many problems in geoscience. Here we combine new estimates of igneous rock area in continental crust from the Macrostrat database (https://macrostrat.org/) with a compilation of detrital zircon ages in order to investigate rock cycling and crustal growth. We find that there is little or no decrease in igneous rock area with increasing rock age. Instead, igneous rock area in North America exhibits four distinct Precambrian peaks, remains low through the Neoproterozoic, and then increases only modestly toward the recent. Peaks in Precambrian detrital zircon age frequency distributions align broadly with peaks in igneous rock area, regardless of grain depositional age. However, detrital zircon ages do underrepresent a Neoarchean peak in igneous rock area; young grains and ca. 1.1 Ga grains are also overrepresented relative to igneous area. Together, these results suggest that detrital zircon age distributions contain signatures of continental denudation and sedimentary cycling that are decoupled from the cycling of igneous source rocks. Models of continental crustal evolution that incorporate significant early increase in volume and increased sedimentation in the Phanerozoic are well supported by these data.
Science Advances, doi. 10.1126/sciadv.aay5178 13p. Pdf
United States, Connecticut
UHT, HPG
Abstract: Diamond and coesite are classic indicators of ultrahigh-pressure (UHP; ?100-kilometer depth) metamorphism, but they readily recrystallize during exhumation. Crystallographically oriented pyroxene and amphibole exsolution lamellae in garnet document decomposed supersilicic UHP majoritic garnet originally stable at diamond-grade conditions, but majoritic precursors have only been quantitatively demonstrated in mafic and ultramafic rocks. Moreover, controversy persists regarding which silicates majoritic garnet breakdown produces. We present a method for reconstructing precursor majoritic garnet chemistry in metasedimentary Appalachian gneisses containing garnets preserving concentric zones of crystallographically oriented lamellae including quartz, amphibole, and sodium phlogopite. We link this to novel quartz-garnet crystallographic orientation data. The results reveal majoritic precursors stable at ?175-kilometer depth and that quartz and mica may exsolve from garnet. Large UHP terranes in the European Caledonides formed during collision of the paleocontinents Baltica and Laurentia; we demonstrate UHP metamorphism from the microcontinent-continent convergence characterizing the contiguous and coeval Appalachian orogen.
Geochemical and kimberlite indicator mineral results for till samples from Nejanilini, Kasmere and Putahow lakes areas, northern Manitoba NTS 64N 64 O 64 P.
Resolving geological and geophysical evidence for a reactivated Cambrian plate boundary beneath the Ouachita orogen: the Alabama- Oklahoma transform fault.
Geological Society of America, 47th Meeting South central April 4-5, 1/2p. Abstract
Abstract: China covers approximately 10?million?km2 and its crust has a complicated evolution of amalgamation, igneous activity, and sedimentation. Many studies address various aspects of China's crust, but few provide a simple geological and geophysical overview that is accessible to students and non-specialists; Filling this void is the objective of this review. China is characterized by thick (40-75?km) crust in the west due to Cenozoic collision with India and thin (30-40?km thick) crust in the east due to E-W Mesozoic-Cenozoic backarc extension. In contrast, overall crustal fabric trends E-W, defined by ophiolite belts and ultra-high pressure metamorphic rocks. This crustal fabric indicates that China has grown like a sandwich, with crust progressively added through Phanerozoic time by closing various E-W oriented Tethys oceans and seaways. In map view, China consists of five E-W trending tiers. Tier 1 is defined by the Central Asian Orogenic Belt (CAOB) along the northern margin of China, which consists of the Xing'an-Mongolia orogenic belt in the NE and the Tianshan Orogen in the NW. The CAOB formed during ~1000?Ma to ~250?Ma and is an accretionary orogen of mostly Paleozoic age that formed through closure of the Paleo-Asian Ocean and collision between the Siberian Craton and Archean-Paleoproterozoic crust to the south, which constitutes Tier 2. The CAOB has a strong aeromagnetic signature. Sediments from the Amur River show detrital U-Pb zircon age peaks at 2.8-2.3?Ga, 1.8?Ga, 450-250?Ma, and 200-100?Ma, which is expected for erosion of the Xing'an-Mongolia belt. Tier 1 igneous rocks are mainly Paleozoic except in the NE (Xing'an-Mongolia orogenic belt) and reflect subduction of the Paleo-Asian Ocean and associated accretion events, whereas Paleozoic CAOB crust in the east is overprinted by Jurassic and Cretaceous igneous rocks related to subduction of ancient Pacific basin oceanic lithosphere. Tier 2 includes the North China Craton (NCC) to the east and Tarim Craton to the west. The NCC contains the oldest rocks in China and is dominated by Archean and Paleoproterozoic ages. The extent of Archean rocks in the NCC may have been overestimated, as suggested by detrital zircons from the Yellow River, which flows across the craton, showing age peaks at 2.5-2.2?Ga, ~1.9?Ga, 500-400?Ma, and 300-200?Ma. The Tarim Craton is dominated by Palaeoproterozoic- Mesoproterozoic metamorphic strata along with a significant proportion of Neoproterozoic (~0.8?Ga) rocks. U-Pb ages for detrital zircons from Tarim River sediments reflect this basement geology, with strong peaks of Early and Late Paleozoic age, less abundant Neoproterozoic ages, and scattered ages back to the Archean. The NCC also was affected by abundant Mesozoic igneous activity with voluminous Early Cretaceous rocks that are associated with lithospheric thinning and decratonization. Tier 3 - also known as the Central China Orogen - is composed of the Sulu-Dabie-Qinling-Kunlun Orogen and records closing of an arm of Prototethys during the Ordovician to Silurian and Paleotethys during the Triassic. Tier 3 contains one of Earth's three giant ultra-high pressure (UHP) terranes with well-documented peak metamorphism of 650-850?°C and 4?GPa, indicating that some of these rocks were deeply subducted and then exhumed from depths of over 120?km in Triassic time. Tier 3 magmatism occurred in two episodes, early-middle Paleozoic and Triassic. Tier 4 contains blocks rifted from Gondwana, which include the Songpan-Ganzi, Qiangtang, and Lhasa terranes of Tibet in the west and the South China Block in the east. These terranes are marked by broad magnetic anomalies with a NE-SW trend along the Pacific margin, and a broad N-S trending anomaly between Tibet and South China. The South China Block is made up of Proterozoic and minor Archean crust of the Yangtze and Cathaysia blocks, which collided at 1.0-0.8?Ga to form the Jiangnan Orogen and the South China Block. Age spectra for detrital zircons from the Yangtze and Pearl Rivers shows major peaks at ~1.8?Ga, 900-800?Ma, ~400?Ma, and 300-150?Ma, which is consistent with the age of South China Block crust. Early-Middle Paleozoic igneous rocks are also found in South China. Mesozoic igneous rocks are widespread in both South China and Tibet and are related to subduction of the Paleo-Pacific and Tethyan oceanic plates, respectively. The accretion of Tibetan terranes to southern Eurasia occurred in the Mesozoic before collision with India at ~55?Ma. Tier 5 is represented by the island of Taiwan on the SE margin of China and marks where China crust continues to grow. Taiwan lies on a complex convergent boundary between the South China Block to the NW, the Philippine Sea Plate to the SE, and the Sunda Plate to the SW.
Abstract: Continental rifts evolve along two possible paths. In one, a rift successfully evolves into seafloor spreading, leaving the rift structures buried beneath thick sedimentary and volcanic rocks at a passive continental margin. Alternatively, the rift fails and remains as a fossil feature within a continent. We consider insights into these processes from studies of North America's Midcontinent Rift (MCR). The MCR combines the linear geometry of a rift formed at a plate boundary and the huge igneous rock volume of a Large Igneous Province. The rift is a fault bounded basin filled with volcanics and sediments, which record a history of extension, volcanism, sedimentation, subsidence, and inversion. The MCR came close to evolving into an oceanic spreading center, but it instead failed and thus records a late stage of rifting. It thus preserves a snapshot of a stage of the process by which actively extending rifts, characterized by upwelling mantle and negative gravity anomalies, evolve either into failed and often inverted rifts without upwelling mantle and positive gravity anomalies or into passive continental margins. Many rifts can be viewed as following a generally similar evolutionary sequence, within which a complex combination of factors control the variability of structures within and among rifts. Study of the MCR also gives insight into passive continental margins. The MCR gives a snapshot of deposition of a thick, dense, and highly magnetized volcanic section during rifting. Surface exposures, seismic, and gravity data delineate a rift basin filled by inward dipping flood basalt layers, underlain by thinned and underplated crust. The fact that the MCR shows many features of a rifted volcanic margin suggests that it came close to continental breakup before it failed, and illustrates how many passive margin features form prior to breakup.
Abstract: North America's Midcontinent Rift (MCR) and Grenville Front (GF) jointly record aspects of the complex history of the assembly of Rodinia. The ~1100 Ma MCR, remaining from a failed major rifting event, is exposed along Lake Superior and well defined by gravity, magnetic, and seismic data. The GF, which results from collisions with Laurentia, is exposed in and identified by seismic and potential field data in Canada. In the eastern U.S., lineated gravity highs extending southward from Michigan to Alabama, along the trend of the front in Canada, have been interpreted either as a buried Grenville Front or as part of the MCR's east arm. We explore this issue by examining the gravity signatures of the MCR and GF. Both the MCR's arms have pronounced gravity highs, with the west arm's greater than the east arm's. Combining the gravity observations with seismic data suggests that the west arm contains 20-25 km thickness of volcanics, whereas the east arm contains 10-15 km of volcanics. Along the Grenville Front in Canada, thickened crust along the northern portion causes a broad gravity low, whereas the stacked thrusts along the southern portion cause essentially no gravity signature. Hence the lineated gravity highs in the eastern U.S. appear similar to those along the remainder of the MCR, and unlike those on either portion of the GF. These data favor the gravity anomalies traditionally interpreted as the Grenville Front in the eastern U.S. as instead being part of the MCR's east arm. A thrust sheet structure like that of the southern Canadian Grenville Front - which would have essentially no gravity effect - could also be present along the MCR's east arm, as implied by recent EarthScope seismic data.
Alkaline and carbonatitic magmatism of the earth and related ore deposits.International Geological Correlation Programme (IGCP)Proposal Project 314. 1991-1995
Tichomirowa, M., Grosche, G., Gotze, J., Belyatsky, B.V., Savva, E.V., Keller, J., Todt, W.
The mineral isotope composition of two Precambrian carbonatite complexes from the Kola Alkaline Province - alteration versus primary magmatic signatures.
International Journal of Earth Science, Vol. 111, 2, 16p.
Europe, Germany
carbonatite
Abstract: The accessories perovskite, pyrochlore, zirconolite, calzirtite and melanite from carbonatites and carbonate-rich foidites from the Kaiserstuhl are variously suited for the in situ determination of their U-Pb ages and Sr, Nd- and Hf-isotope ratios by LA-ICP-MS. The 143Nd/144Nd ratios may be determined precisely in all five phases, the 176Hf/177Hf ratios only in calzirtite and the 87Sr/86Sr ratios in perovskites and pyrochlores. The carbonatites and carbonate-rich foidites belong to one of the three magmatic groups that Schleicher et al. (1990) distinguished in the Kaiserstuhl on the basis of their Sr, Nd and Pb isotope ratios. Tephrites, phonolites and essexites (nepheline monzogabbros) form the second and limburgites (nepheline basanites) and olivine nephelinites the third. Our 87Sr/86Sr isotope data from the accessories overlap with the carbonatite and olivine nephelinite fields defined by Schleicher et al. (1990) but exhibit a much narrower range. These and the ?Nd and ?Hf values plot along the mantle array in the field of oceanic island basalts relatively close to mid-ocean ridge basalts. Previously reported K-Ar, Ar-Ar and fission track ages for the Kaiserstuhl lie between 16.2 and 17.8 Ma. They stem entirely from the geologically older tephrites, phonolites and essexites. No ages existed so far for the geologically younger carbonatites and carbonate-rich foidites except for one apatite fission track age (15.8 Ma). We obtained precise U-Pb ages for zirconolites and calzirtites of 15.66, respectively 15.5 Ma (±?0.1 2?) and for pyrochlores of 15.35?±?0.24 Ma. Only the perovskites from the Badberg soevite yielded a U-P concordia age of 14.56?±?0.86 Ma while the perovskites from bergalites (haüyne melilitites) only gave 206Pb/238U and 208Pb/232Th ages of 15.26?±?0.21, respectively, 15.28?±?0.48 Ma. The main Kaiserstuhl rock types were emplaced over a time span of 1.6 Ma almost 1 million years before the carbonatites and carbonate-rich foidites. These were emplaced within only 0.32 Ma.
Gem deposits in the 21st. Century - a look to the future
Geological Association of Canada (GAC)/Mineralogical Association of Canada (MAC)/SEG Annual Meeting May 27-29. Toronto, Ontario, Abstract, Vol. 16, p. A64. Abstract
Geological Association of Canada (GAC)/Mineralogical Association of Canada (MAC)/SEG Annual Meeting May 27-29. Toronto, Ontario, Abstract, Vol. 16, p. A64. Abstract
Abstract: The Trans-Hudson Orogen (THO), formed from the convergence between the Superior craton and the composite Churchill Upper Plate (CUP), is one of the best-preserved examples of a collisional orogen in the Paleoproterozoic. Similar to modern collision systems such as the Himalayan orogen, it is characterized by a composite upper plate in which terrane accretion established a continental plateau that was tectonically and magmatically active for >100 myr. Our study presents new petrological and geochronological data for four samples collected in three lithotectonic domains of the south Rae craton (one of the CUP terranes). The results presented here allow us to re-define the previously proposed extent of THO reworking in the CUP and afford the opportunity to study and compare the evolution of various fragments that illustrate differing levels of a collapsed plateau in the CUP hinterland. The new data indicate that the south Rae craton locally preserves evidence for burial at 1.855-1.84 Ga with peak metamorphic conditions at approximately 790 °C and 9.5-12.5 kbar followed by rapid cooling and decompression melting (P < 6 kbar) at ca. 1.835-1.826 Ga. These results, which provide important and so far missing Pressure-Temperature-time (P-T-t) constraints on the evolution of the south Rae craton in the Northwest Territories at Trans-Hudson time, coupled with existing regional geochronological and geochemical data, are used to propose an updated model for the post-1.9 Ga THO collision and extensional collapse. Our results reveal that: i) initial thickening in the upper plate started at Snowbird time (ca. 1.94 Ga), then continued via Sask collision (with high-grade metamorphism recorded in the south Rae craton, ca. 1.85 Ga), and ended with Superior collision (ca. 1.83 Ga); ii) the extent of the THO structural and metamorphic overprint in the SW CUP is much broader across strike than previously recognized, and iii) T-t data in the south Rae are indicative of relatively fast cooling rates (8-25 °C/Ma) compared to other known Precambrian orogens. We suggest that the Paleoproterozoic THO represents the first record of a major ‘modern-style’ orogenic plateau collapse in Earth’s history.
Abstract: The previously unstudied cooling and exhumation history of mid-crustal rocks exposed on southeastern Baffin Island (Canada) provides new insights into the post-orogenic evolution of the Paleoproterozoic Trans-Hudson Orogen (THO). New 40Ar/39Ar step-heat analyses of biotite, muscovite and phlogopite and core-to-rim intra-grain 40Ar/39Ar analyses of muscovite have a range of apparent ages compatible with slow regional cooling following peak metamorphism. Twenty-nine amphibolite- to granulite-facies rocks were dated using the 40Ar/39Ar step-heating laser (CO2) method. 40Ar/39Ar spot analyses were performed across muscovite grains from three samples using an ultraviolet (UV) laser to investigate intra-grain 40Ar/39Ar age variations. Step-heating apparent ages range from ca. 1788–1622 Ma for biotite, 1720–1630 Ma for phlogopite and 1729–1657 Ma for muscovite. UV spot 40Ar/39Ar analyses in the three muscovite grains range from ca. 1661–1640 Ma, 1675–1645 Ma and 1680–1652 Ma, with core-to-rim apparent age gradients of 20–30 Myr. Previous studies resolved peak metamorphism in this region to between ca. 1860 and 1820 Ma and identified late- to post-THO zircon and monazite populations at ca. 1800–1750 Ma. Numerical diffusion models for Ar in muscovite were conducted to test different Proterozoic cooling and exhumation scenarios. Comparisons with our 40Ar/39Ar ages attest to cooling rates of ~ 1–2 °C/Myr following peak metamorphism and ~ 1.5–2.5 °C/Myr after ca. 1740 Ma. Anomalously old apparent 40Ar/39Ar ages, in cases equivalent to U–Pb zircon rim and monazite ages, likely result from incorporation of excess Ar. The results suggest that mid-crustal rocks on southeastern Baffin Island remained hotter than ~ 420–450 °C for ~ 150–200 Myr after peak metamorphism, with subsequent slow cooling and denudation rates that are typical of Proterozoic orogens. The apparent absence of orogenic collapse implies that, despite high temperatures and estimated maximum crustal thicknesses comparable to those of large, hot orogens, the THO remained gravitationally stable during its terminal phase.
Precambrian Research, doi.org/10.1016/j.precamres.2020.105703 in press available 80p. Pdf
Canada
geothermometry
Abstract: The northern Canadian Shield is comprised of multiple Archean cratons that were sutured by the late Paleoproterozoic to form the Canadian component of supercontinent Nuna. More than 2000 combined K-Ar and 40Ar/39Ar cooling ages from across the region reveal a stark contrast in upper and lower plate thermal responses to Nuna-forming events, with the Churchill Province in particular revealing near complete thermal reworking during the late Paleoproterozoic. We review the detailed cooling history for five regions that span the Churchill Province and Trans-Hudson orogen (THO): Thelon Tectonic Zone, South Rae, Reindeer Zone, South Hall Peninsula, and the Cape Smith Belt. The cooling patterns across Churchill Province are revealed in two >1500 km transects. At the plate scale, Churchill’s cooling history is dominated by THO accretionary and collisional events, during which it formed the upper plate. Cooling ages generally young from west to east across both southern and central Churchill, and latest cooling in the THO is 50 myr older in southernmost Churchill (Reindeer Zone) compared to eastern Churchill (Hall Peninsula), indicating diachronous thermal equilibration across 2000 km strike length of the THO. Churchill exhibits relatively high post-terminal THO cooling rates of ~4 °C/myr, which support other geological evidence for widespread rapid exhumation of the THO upper plate following terminal collision, potentially in response to lithospheric delamination.
Earth and Planetary Science Letters, Vol. 494, pp. 172-189.
Mantle
peridotites
Abstract: The oxygen fugacity (fO2) of the oceanic upper mantle has fundamental implications for the production of magmas and evolution of the Earth's interior and exterior. Mid-ocean ridge basalts and peridotites sample the oceanic upper mantle, and retain a record of oxygen fugacity. While fO2 has been calculated for mid-ocean ridge basalts worldwide (>200 locations), ridge peridotites have been comparatively less well studied (33 samples from 11 locations), and never in the same geographic location as basalts. In order to determine whether peridotites and basalts from mid-ocean ridges record congruent information about the fO2 of the Earth's interior, we analyzed 31 basalts and 41 peridotites from the Oblique Segment of the Southwest Indian Ridge. By measuring basalts and peridotites from the same ridge segment, we can compare samples with maximally similar petrogenetic histories. We project the composition and oxygen fugacity of each lithology back to source conditions, and evaluate the effects of factors such as subsolidus diffusion in peridotites and fractional crystallization in basalts. We find that, on average, basalts and peridotites from the Oblique Segment both reflect a source mantle very near the quartz-fayalite-magnetite (QFM) buffer. However, peridotites record a significantly wider range of values (nearly 3 orders of magnitude in fO2), with a single dredge recording a range in fO2 greater than that previously reported for mid-ocean ridge peridotites worldwide. This suggests that mantle fO2 may be heterogeneous on relatively short length scales, and that this heterogeneity may be obscured within aggregated basalt melts. We further suggest that the global peridotite fO2 dataset may not provide a representative sample of average basalt-source mantle. Our study motivates further investigation of the fO2 recorded by ridge peridotites, as peridotites record information about the fO2 of the Earth's interior that cannot be gleaned from analysis of basalts alone.
IN: Deep carbon: past to present, Orcutt, Daniel, Dasgupta eds., pp. 237-275.
Mantle
carbon
Abstract: This chapter provides a summary of the flux of carbon through various oceanic volcanic centers such as mid-ocean ridges and intraplate settings, as well as what these fluxes indicate about the carbon content of the mantle. By reviewing methods used to measure the carbon geochemistry of basalts and then to estimate fluxes, the chapter provides insight into how mantle melting and melt extraction processes are estimated. The chapter discusses how the flux of carbon compares with other incompatible trace elements and gases. From there, the chapter discusses whether the budget of carbon in the ocean mantle can be explained by primordial carbon or whether carbon recycling is required to balance the budget.
Preliminary investigation: sedimentology and provenance of the Wood Mountain Formation and derived glacial and glaciofluival sediments - context for KIM anomalies.
Saskatchewan Geological Survey Summary of Investigations 2004, Vol. 2, pp. A 1-12.
New 207 Pb 206 Pb and 40 Ar 39 Ar ages from SW Montana: constraints on the Proterozoic and Archean tectonic and depositional history of the Wyoming Province.
Abstract: Complex ice flow history, variable bedrock topography, landform types, and drift thickness may lead to complex glacial sediment dispersal patterns that are difficult to interpret, with implications for subglacial sediment provenance and related ice sheet research, as well as for mineral (drift) exploration. This study investigates the controls of bedrock topography, drift thickness, and landforms on 3D dispersal patterns in two study areas located southeast of Lac de Gras, Northwest Territories. The two areas are situated only about 25 km apart and have a similar ice flow history (clockwise shift from SW to NW). However, study area #1 hosts kimberlites within low topographic relief, while area #2 hosts kimberlites on a small granitic hill. The distribution and type of sediment-landform assemblages, as well as drift thickness, also differ between the two areas. Sediment characteristics, matrix geochemistry, and kimberlite indicator minerals (KIM) from surficial samples (n = 51) were analyzed and compared with a sample subset (n = 2000, from 250 boreholes) from a large RC drilling dataset donated by industry. Digital elevation models and a surficial geology map were also used. Results show contrasting patterns between the two areas, despite a similar ice flow record. Area #1 has a well-developed, yet fragmented 3D dispersal train consistent with the clockwise ice flow shift record. Area #2's dispersal patterns are less clearly-defined and appear unrelated or only weakly related to the known local source within the granitic hill. We find relationships between: 1) the strength of dispersal patterns and the bedrock topography in the kimberlitic source area; and, 2) the dispersal style and 3D shape within sediment-landform landsystems. These relationships have implications for drift prospecting survey design, as well as the interpretation of dispersal train patterns.
Abstract: Drift prospecting has been a successful mineral exploration tool in previously glaciated terrains. Based on the concepts of glacial dynamics, and related sediment production, transport and deposition, drift prospecting surveys assess compositional variability within glacial sediments and trace indicators of mineralization back to a buried bedrock source. The time-transgressive nature of shifting ice flow direction and related till production is an important factor, controlling the shape and extent of dispersal patterns in till. The effect of changing ice flow on the composition of till has been well-studied in both map view, as well as longitudinally in cross section (i.e., dispersal curves). Fewer studies have looked at dispersal patterns holistically in three-dimensions. Here, we use 94 reverse circulation (RC) boreholes, yielding 254 till samples, to reconstruct the subsurface geometry of a dispersal train from a pair of buried kimberlite pipes (DO-27 and DO-18) in the Northwest Territories. Discrete smooth interpolation modeling in SKUA-GOCAD based on downhole data allows for visualization of geochemical anomalies within the till column, as well as the subsurface density of kimberlite indicator mineral grains. Through the combination of borehole data, field work, and modeling, we are able to compare three-dimensional dispersal patterns in the subsurface with local ice flow records, measured from erosional ice flow indicators in the field. This dataset allows us to evaluate the role that changing ice flow, as well as local bedrock surface topography, play in controlling dispersal and deposition of clastic sediment by past ice sheets. Our modeling documents buried palimpsest terrains along older ice flow trajectories, demonstrating lateral and vertical variability within a single, relatively thin and discontinuous till sheet. Furthermore, we observe relationships between local indicator mineral concentrations and bedrock topography, with indicator mineral dispersal concentrated along a bedrock-controlled topographic low aligned with the most recent ice flow. This work demonstrates the benefit of detailed mapping and visualization of a dispersal plume, even in areas of relatively thin and discontinuous till cover, highlighting the role basal topography and shifting ice flow plays on shaping the surface expression of a dispersal train.
45th. Annual Yellowknife Geoscience Forum, p. 67 abstract
Canada, Northwest Territories
geochemistry - indicator minerals
Abstract: Tracing surficial dispersal patterns of indicator minerals within glacial sediments in the main up-ice direction has greatly contributed to numerous mineral discoveries of economic value in the Northwest Territories. However, many cases have also reported perplexing scenarios of dispersal trains seemingly lacking a source, or known sources without a spatially associated dispersal train at the surface. These ‘special’ cases often hinder exploration efforts, and tend to remain poorly understood; yet these cases are becoming increasingly important to decipher as exploration moves into more complex terrains. We present an overview of our research done in the Lac de Gras area over the past few years in collaboration with the Northwest Territories Geological Survey and their partners investigating the effect of multiple ice flows, variable bedrock topography and drift thickness, and the complexities of glacial sedimentary environments on 2D and 3D mechanical (detrital) dispersion. Our research draws from surface and subsurface datasets from various sources at both the regional and local scales. We show that despite the occurrence of relatively long, continuous, surficial patterns extending in the direction of the latest-strongest ice flow event in the region, a subtle record of the time-transgressive glacial history is also frequently preserved. These records yield information about the net effect on sediment dispersion of multiple ice flow phases, bedrock geology, basal topography, and glacial depositional processes. Our findings suggest these geological factors played a key role in producing some of the most irregular and enigmatic dispersal patterns in the region. They also offer insights into how to best characterize and explain the signal (or lack thereof) from elusive buried sources of potential economic interest.
Ross, M., Kelley, S.E., Janzen, R., Stirling, R.A., Normandeau, P.X., Elliott, B.
Orphan and elusive glacial dispersal trains from kimberlites in the Lac de Gras area.
2018 Yellowknife Geoscience Forum , p. 65-66. abstract
Canada, Northwest Territories
geochemistry
Abstract: Numerous glacial dispersal trains, spatially and compositionally associated to kimberlites, have been characterized and mapped in the Lac de Gras region, Northwest Territories (NT). However, a small number of these trains have yet to be associated with a source. Additionally, a number of known sub-cropping kimberlites do not have well-defined, spatially associated, trains of indicator minerals. These issues suggest that local factors may be important in controlling the occurrence, shape, and strength of a dispersal pattern and its spatial association with a kimberlite. Identifying these factors and understanding their effect on the dispersion of indicator minerals could provide a road map for finding additional diamondiferous kimberlites in the NT and elsewhere. Here we examine contrasting dispersal trains from south and southwest of Lac de Gras, as well as situations where the source of known dispersal trains (e.g., Coppermine Train) continue to elude exploration geologists. Using both surface and subsurface datasets, we find that the bedrock geology and topography of the source area, as well as those of the dispersal area, are potential key controls on the type and shape of dispersal patterns. Even across discontinuous drift and subdued shield relief we find that bedrock topography and lithology modulated the effect of glacial dynamics on till production and provenance. These 'bedrock factors' have interacted in various ways during Quaternary glaciations, in combinations unique to each case, to generate complex dispersal patterns in three dimensions. Accounting for these factors, using both surface and subsurface data, could enhance the success of drift exploration programs and improve their outcome in the glaciated shield terrains of northern Canada.
Stirling, R.A., Kelley, S.E., Ross, M., Elliott, B., Normandeau, P.X.
Surface and subsurface till characteristics in a drumlin field south of Lac de Gras, NT; implications for drift prospecting. ( Dominion's Ekati and North Arrow)
2018 Yellowknife Geoscience Forum , p. 80. abstract
Canada, Northwest Territories
deposit - Ekati
Abstract: Successful diamond exploration is becoming increasingly challenging as the best expressed targets have been found. Areas of variable drift thickness and heterogeneous surficial deposits present several challenges to exploration. One particular aspect that is poorly understood is the effect of well-developed drumlin fields on the surface expression of dispersal trains. Our study focuses on drumlin fields and their potential effects in the expression of a dispersal pattern. Because drumlins are often stratified we hypothesize that multiple till layers of contrasting provenance, representing multiple ice-flow directions, can occur at the surface across drumlin fields due to erosional processes. This has the potential to affect analysis and interpretation of surficial till dispersion data.
To test this hypothesis, we examined data from a large RC drilling dataset donated by Dominion Diamond Ekati Corp. and North Arrow Minerals Inc. and complemented it with field-based surficial geology observations and analysis of additional surficial till samples across targeted drumlins. The surficial samples were collected at the top and on the sides of drumlins to test whether any glacial stratigraphy is expressed, especially in areas where post-glacial erosion may have exposed internal drumlin stratigraphy. Based on the RC data and available maps drift thickness within the drumlin field ranges from 1 meter in the swales between drumlins to about 20 meters on the top of the highest amplitude drumlins. Locally measured ice-flow indicators (n=11) show three distinct ice-flow directions from older to youngest: 260, 290, 305 degrees. Preliminary analysis of textural and compositional data shows variations within the till at depth as well as across the drumlin field. Ongoing work focuses on determining the relationship (or lack thereof) between till characteristics, drumlins, and ice flow history (till provenance), as well as on three-dimensional dispersal patterns of kimberlite indicator minerals and related geochemical pathfinders. This work will highlight landform feature considerations by using multiple parameters to analyze sample data in areas with complex glacial geology and high diamond potential.
Yellowknife Forum NWTgeoscience.ca, abstract volume p. 89-90.
Canada, Northwest Territories
deposit - lac de Gras
Abstract: Till dispersal patterns may appear as a consistent train of indicators extending in the direction of the latest ice-flow phase from a source, or along a direction defined by an older ice-flow phase. However, other dispersal patterns, sometimes even in the same area, may have poorly-defined, discontinuous trains, or even lack dispersal trains all together. This research investigates dispersal patterns from two sites southeast of Lac de Gras that were affected by the same ice-flow history, but show important differences in bedrock topography, till thickness, and subglacial landform assemblages. The goal is to improve our understanding of bedrock and till thickness effects on dispersal trains. New local ice-flow indicators (n=16) constrain local ice-flow history. Digital elevation models and a surficial map are used to identify surficial landforms and to loosely constrain bedrock topography. We also use a subset of KIM results from a large industry-donated RC-drilling database (n=502 from 185 boreholes) which includes information on subsurface sediment characteristics and depth-to-bedrock data, which further constrain bedrock topography. In addition, we use texture, matrix geochemistry, KIMs, and clast lithology from a smaller set of 51 surface samples to compare dispersal patterns at surface and at depth. Part of the eastern study area is characterized by a well-defined drumlin field associated with the young NW ice-flow phase, variable till thickness (0-18m), and relatively flat bedrock topography (<20m elevation change). Kimberlites WO-17/WO-20 exhibit a short, but well-defined KIM dispersal train in the direction of the last dominant flow phase (NW); the dispersal area is also characterized by thin discontinuous till. A second KIM dispersal train is also recognized in the thicker till of the drumlin field SW of WO-17/20. Based on its location relative to WO-17/20, and till geochemistry and lithology counts, this pattern is interpreted to be a palimpsest train associated to the oldest SW ice flow. The western study area, located 20km from the eastern area, is characterized by a similar ice-flow history, but its bedrock topography varies more (~70m), with thin till, generally under 4m. A known kimberlite within the western area (Big Blue) is nestled within a bedrock topographic high ~20m above the surrounding terrain. Fragmented and more elusive till anomalies occur down-ice from this source. The lack of a well-developed dispersal train associated with the kimberlite is noteworthy, and may be due to the evolution of subglacial conditions around the bedrock hill. Our current model involves initial basal sliding and erosion of the top of the kimberlite and englacial entrainment. This phase was followed by reduced local abrasion and erosion rates within the kimberlite depression, possibly related to the development of low-pressure cavities over several local depressions: an idea supported by evidence of late-stage meltwater activity. This research highlights the important role of bedrock topography and related subglacial conditions both in the source area and dispersal area, as well as the potential for enhanced preservation of palimpsest trains in drumlinized till blankets.
Journal of Geochemical Exploration, Vol. 199, pp. 105-127.
Canada, Northwest Territories
geomorphology
Abstract: Tracing indicator minerals and geochemical pathfinders in glacial sediments back to their up-ice source is a common mineral exploration approach in prospective, formerly glaciated regions. In this study, we utilize surface and subsurface data from the Lac de Gras area of the Northwest Territories to develop a three-dimensional understanding of till compositional anomalies emanating from two known kimberlite pipes, DO-18 and DO-27. Specifically, this study examines the three-dimensional shape of dispersal trains as defined by geochemical pathfinder elements and kimberlite indicator minerals shed from a pair of kimberlite pipes within a till cover of variable thickness. From our ninety-four reverse circulation boreholes (n?=?251 till samples), and other publicly-available geologic datasets, we have reconstructed bedrock topography, till thickness, and the subsurface geometry of two dispersal trains. Utilizing our three-dimensional dataset, we have documented the role of basal topography in creating dispersal patterns with contrasting geometries from two adjacent kimberlites, as well as in the preferential preservation of older till units. The combination of field observations of ice-flow indicators and till compositional data demonstrates that features produced by multiple ice flows are preserved in both the erosional and depositional records in this region. Three-dimensional dispersion patterns of kimberlite indicators reflect the effect of shifting ice-flow direction with respect to slope aspect of bedrock topography in governing compositional variability within glacial drift. Our findings suggest that surficial data do not capture the full extent of dispersion patterns even in areas of relatively thin and discontinuous till cover.
Abstract: Reconstructions of past ice-flow provide useful insights into the long-term behaviour of past ice sheets and help to understand how glaciated landscapes are shaped. Here, we present reconstruction of a 10-phase ice-flow history from southwestern Hudson Bay in northeastern Manitoba (Canada), a dynamic region situated between two major ice dispersal centres of the Laurentide Ice Sheet. We utilize a diverse geologic dataset including 1900 field-based erosional indicators, 12 streamlined-landform flowsets, esker and meltwater corridor orientations, 103 till-fabrics analyses, and 1344 till-clast lithology counts. Our reconstruction suggests that both pre-MIS 2 and MIS 2 glaciations followed similar growth patterns, where ice advanced into study area from ice centered to the east (probably in northern Quebec), followed by a switch in ice-flow direction indicating flow from the Keewatin ice centre to the northwest and north. The cause for this switch in ice-flow orientation is uncertain, but the youngest switch may relate to retreat of ice during MIS 3 that then left space for Keewatin-sourced ice to advance over the study area. While modelling experiments indicate widespread cold-based conditions in the study area during the last glacial cycle, uniformly relict landscapes are not common. Instead, the glaciated landscape is palimpsest and commonly fragmented, forming a subglacial bed mosaic of erosional and depositional assemblages that record both shifting ice-flow direction through time and shifting subglacial conditions. Each assemblage formed, or modified, during times of dynamic (warm-based) ice, and later preserved under conditions below or close to the pressure melting point (slow and sluggish, or cold-based).
Abstract: here are three major reservoirs for carbon in the Earth at the present time, the core, the mantle, and the continental crust. The carbon in the continental crust is mainly in carbonates (limestones, marbles, etc.). In this paper we consider the origin of the carbonates. In 1952, Harold Urey proposed that calcium silicates produced by erosion reacted with atmospheric CO2 to produce carbonates, this is now known as the Urey reaction. In this paper we first address how the Urey reaction could have scavenged a significant mass of crustal carbon from the early atmosphere. At the present time the Urey reaction controls the CO2 concentration in the atmosphere. The CO2 enters the atmosphere by volcanism and is lost to the continental crust through the Urey reaction. We address this process in some detail. We then consider the decay of the Paleocene-Eocene thermal maximum (PETM). We quantify how the Urey reaction removes an injection of CO2 into the atmosphere. A typical decay time is 100 000 yr but depends on the variable rate of the Urey reaction.
Abstract: Reactions involving carbon in the deep Earth have limited manifestations on Earth's surface, yet they have played a critical role in the evolution of our planet. The metal-silicate partitioning reaction promoted carbon capture during Earth's accretion and may have sequestered substantial carbon in Earth's core. The freezing reaction involving iron-carbon liquid could have contributed to the growth of Earth's inner core and the geodynamo. The redox melting/freezing reaction largely controls the movement of carbon in the modern mantle, and reactions between carbonates and silicates in the deep mantle also promote carbon mobility. The 10-year activity of the Deep Carbon Observatory has made important contributions to our knowledge of how these reactions are involved in the cycling of carbon throughout our planet, both past and present, and has helped to identify gaps in our understanding that motivate and give direction to future studies.
Abstract: Recent advances in core scanning technologies allow for fast and non-destructive chemical and mineral profiling of rock samples for mineral services and oil and gas exploration. The aim of these automatic core scan methods is to obtain valuable information for profiling drill core cuttings with minimum sample preparation at relatively high speed. In the last decade, a core logging system using an automated infrared-based hyperspectral line-profiling system, Hylogger, has progressed to become an effective standard for the Australian mineral exploration industry. Its results are used to rapidly obtain mineralogical information allowing the characterisation of different geological formations in near real-time. The interpretation of Hylogger data can be challenging for certain complex mineral mixtures. Here we solve this issue by augmenting the Hylogger interpretation with elemental analysis using the Itrax core scanner equipped with an X-ray fluorescence (XRF) spectrometer. The Itrax core scanner produces high-resolution elemental data of major, minor and trace elements in one dimension. We analyse and compare the Hylogger and Itrax data, with each dataset independently cross-checked using X-ray diffraction (XRD) and thin-section petrology and propose a workflow harvesting the mutual strengths of each method. The recommended workflow consists of rapid screening using Hylogger and XRF analysis, providing new insights into the mineralogy based on comparative multiscale element-mineral analysis. The workflow is tested on four different types of volcanic rock samples, where infrared spectra of individual minerals overlap. We tested tuffaceous ash, basaltic, dolerite, and basaltic-andesitic rocks. Our study shows that embedding Itrax core scanner data into the workflow provides a solution to the challenges of interpreting Hylogger data in complex mineral samples. The proposed workflow provides a total system for multiscale, high-resolution petrophysical analyses and rock property modelling.
Abstract: The goal of this work is to determine the effect of multiple glaciations on till composition, in a zone of transition from a multi-till stratigraphy within the Hudson Bay Lowland (HBL) to a single till stratigraphy over the Precambrian shield. The study area, in NE Manitoba, has access to numerous sections that expose multiple tills, in addition to interglacial and postglacial sediments. Sequences of thick till are not easily separated into different units, despite previous field attempts to define four named tills. The compositional transition to thin till overlying the Precambrian Shield in the west is also not well understood. Yet, the two different settings were affected by the same 3+ glacial cycles. The wide range in eastern- and/or northeastern-sourced calcareous clast concentrations, and ‘locally’-sourced shield clast concentrations, combined with variable concentrations of northern-sourced clasts, suggests that the tills of northeastern Manitoba are ‘provenance’ hybrids. Local tills result from the net effect of multiple glacial processes that underwent spatiotemporal variability. Mixed provenance applies not only to surface tills, but to the subsurface tills as well. Preliminary results suggest that carbonate transport across the shield was continuous throughout several glacial cycles, but the bulk of transport likely occurred prior to the most recent glacial cycle. Current work has established a northern-Manitoba ice-flow history using the erosional and depositional record, which encompasses 5 to 7 phases. This new compilation is used in conjunction with ‘till-clast’ stratigraphy and ‘till-geochemistry’ stratigraphy, to identify a new provenance framework for tills in northeastern Manitoba.
Abstract: Atom-probe tomography (APT) and secondary ion mass spectrometry (SIMS) provide complementary in situ element and isotope data in minerals such as zircon. SIMS measures isotope ratios and trace elements from 1–20 ?m spots with excellent accuracy and precision. APT identifies mass/charge and three-dimensional position of individual atoms (±0.3 nm) in 100 nm-scale samples, volumes up to one million times smaller than SIMS. APT data provide unique information for understanding element and isotope distribution; crystallization and thermal history; and mechanisms of mineral reaction and exchange. This atomistic view enables evaluation of the fidelity of geochemical data for zircon because it provides new understanding of radiation damage, and can test for intracrystalline element mobility. Nano-geochronology is one application of APT in which Pb isotope ratios from sub-micrometer domains of zircon provide model ages of crystallization and identify later magmatic and metamorphic reheating.
45th. Annual Yellowknife Geoscience Forum, p. 33 abstract
Canada, Northwest Territories
deposit - Darby
Abstract: New geological and geophysical research on Canada’s Rae craton are providing an increasingly good baseline for diamond exploration. This study uses mantle xenoliths and xenocrysts from the Darby property, located ~200 km southwest of the community of Kugaaruk, Nunavut, to provide new information on the lithospheric mantle and diamond potential of the western portion of the central Rae. Peridotite xenoliths containing enough fresh olivine have a median Mg# value of 92.5, indistinguishable from the median value of 92.6 typical of cratonic peridotites world-wide. Only of the 14 peridotitic xenoliths contain fresh garnet. Of these, garnet in one sample is classified as harzburgitic (G10), giving a minimum pressure of 4.7 GPa using the P38 geobarometer (38 mW/m2 model geothermal gradient), while garnets from three peridotites are classified as lherzolitic (G9). 52 garnets picked from concentrate have lherzolitic affinities. Lherzolitic diopsides from kimberlite heavy mineral concentrate yield a lithospheric thickness of ~ 200 km. The four garnet peridotite xenoliths and 49 peridotitic garnets from concentrate yield two distinct modes in mantle sampling depths using Ni thermometry, when projected to the Cpx geotherm. A cluster of samples from the higher Ca/Cr lherzolitic garnets equilibrated at 765 to 920 °C with a group of peridotitic garnets (50 % of xenoliths and 28 % of concentrate) from the lower Ca/Cr lherzolitic garnets with anomalously high Ti concentrations yielding super-adiabatic TNi values The aluminum-in-olivine thermometer applied to olivines filtered to be “garnet facies yielded a mantle sampling portion of the mantle cargo from the diamond stability field. A suite of pyroxenitic xenoliths are a feature of each Darby kimberlite target. New screening techniques indicate that these rocks likely originate close to the crust mantle boundary. Osmium isotope analyses of the Darby peridotites reveal whole-rock Re-depletion ages ranging from Mesoarchean to Paleoproterozoic. The pyroxenite xenoliths have very radiogenic Os isotope compositions and provide the first age information from pyroxenites/“eclogites” beneath the Rae craton. Their resulting Archean whole rock TMA ages are consistent with a Mesoarchean age of the western Central Rae lithosphere older than the lithosphere beneath the Repulse Bay block in the East section of the Rae craton (Liu et al., 2016. Precambrian Research 272). The highly depleted olivine compositions, thick cold lithosphere, and Archean ages of the Darby peridotite xenoliths clearly indicate the presence of 200 km thick cold cratonic lithospheric mantle beneath the western segment of the central Rae craton circa 540 Ma. The Archean model ages of most of the pyroxenites support this, notwithstanding the fact that some of these rocks could be sampling either crust or mantle lithologies very close to the crust-mantle boundary. Mantle sampling took place well into the diamond stability field at Darby.
Mineralogy and Petrology, doi.org/10.1007/s00710-018-0609-4 14p.
Canada, Northwest Territories
deposit - Darby
Abstract: New geological and geophysical research on Canada’s Rae craton are providing an increasingly good baseline for diamond exploration. This study uses mantle xenoliths and xenocrysts from the Darby property, located ~200 km southwest of the community of Kugaaruk, Nunavut, to provide new information on the lithospheric mantle and diamond potential of the western portion of the central Rae. Peridotite xenoliths containing enough fresh olivine have a median Mg# value of 92.5, indistinguishable from the median value of 92.6 typical of cratonic peridotites world-wide. Only of the 14 peridotitic xenoliths contain fresh garnet. Of these, garnet in one sample is classified as harzburgitic (G10), giving a minimum pressure of 4.7 GPa using the P38 geobarometer (38 mW/m2 model geothermal gradient), while garnets from three peridotites are classified as lherzolitic (G9). 52 garnets picked from concentrate have lherzolitic affinities. Lherzolitic diopsides from kimberlite heavy mineral concentrate yield a lithospheric thickness of ~ 200 km. The four garnet peridotite xenoliths and 49 peridotitic garnets from concentrate yield two distinct modes in mantle sampling depths using Ni thermometry, when projected to the Cpx geotherm. A cluster of samples from the higher Ca/Cr lherzolitic garnets equilibrated at 765 to 920 °C with a group of peridotitic garnets (50 % of xenoliths and 28 % of concentrate) from the lower Ca/Cr lherzolitic garnets with anomalously high Ti concentrations yielding super-adiabatic TNi values The aluminum-in-olivine thermometer applied to olivines filtered to be “garnet facies yielded a mantle sampling portion of the mantle cargo from the diamond stability field. A suite of pyroxenitic xenoliths are a feature of each Darby kimberlite target. New screening techniques indicate that these rocks likely originate close to the crust mantle boundary. Osmium isotope analyses of the Darby peridotites reveal whole-rock Re-depletion ages ranging from Mesoarchean to Paleoproterozoic. The pyroxenite xenoliths have very radiogenic Os isotope compositions and provide the first age information from pyroxenites/“eclogites” beneath the Rae craton. Their resulting Archean whole rock TMA ages are consistent with a Mesoarchean age of the western Central Rae lithosphere older than the lithosphere beneath the Repulse Bay block in the East section of the Rae craton (Liu et al., 2016. Precambrian Research 272). The highly depleted olivine compositions, thick cold lithosphere, and Archean ages of the Darby peridotite xenoliths clearly indicate the presence of 200 km thick cold cratonic lithospheric mantle beneath the western segment of the central Rae craton circa 540 Ma. The Archean model ages of most of the pyroxenites support this, notwithstanding the fact that some of these rocks could be sampling either crust or mantle lithologies very close to the crust-mantle boundary. Mantle sampling took place well into the diamond stability field at Darby.
Abstract: Earth’s core is a hot, dense reservoir driving geological processes from the heart of our planet. The core is often described in two parts: a solid iron-nickel inner core surrounded by a liquid outer core of similar alloys. Convective currents in the outer core generate Earth’s magnetic field, preventing the planet’s atmosphere from being stripped away by the solar wind and making life on Earth possible. But sitting beneath our feet under 2,900 kilometers of rock, Earth’s core is more inaccessible than the surface of Mars. No probe can directly sample the core-mantle boundary, and the planet’s inner structure has been deduced from seismology, not observation. There may, however, be a work-around.
Kahoui, M., Kemainsky, F.V., Griffin, W.L., Belousova, E., Mahdjoub, Y., Chabane, M.
Detrital pyrope garnets from the El Kseibat area, Algeria: a glimpse into the lithospheric mantle beneath the north-eastern edge of the West African Craton.
Journal of African Earth Sciences, In press available, 46p.
Geochimica et Cosmochinica Acta, Vol. 215, pp. 432-446.
Africa, Zimbabwe
craton
Abstract: Hafnium and oxygen isotopic compositions measured in-situ on U-Pb dated zircon from Archaean sedimentary successions belonging to the 2.9–2.8 Ga Belingwean/Bulawayan groups and previously undated Sebakwian Group are used to characterize the crustal evolution of the Zimbabwe Craton prior to 3.0 Ga. Microstructural and compositional criteria were used to minimize effects arising from Pb loss due to metamorphic overprinting and interaction with low-temperature fluids. 207Pb/206Pb age spectra (concordance >90%) reveal prominent peaks at 3.8, 3.6, 3.5, and 3.35 Ga, corresponding to documented geological events, both globally and within the Zimbabwe Craton. Zircon ?18O values from +4 to +10‰ point to both derivation from magmas in equilibrium with mantle oxygen and the incorporation of material that had previously interacted with water in near-surface environments. In ?Hf-time space, 3.8–3.6 Ga grains define an array consistent with reworking of a mafic reservoir (176Lu/177Hf ?0.015) that separated from chondritic mantle at ?3.9 Ga. Crustal domains formed after 3.6 Ga depict a more complex evolution, involving contribution from chondritic mantle sources and, to a lesser extent, reworking of pre-existing crust. Protracted remelting was not accompanied by significant mantle depletion prior to 3.35 Ga. This implies that early crust production in the Zimbabwe Craton did not cause complementary enriched and depleted reservoirs that were tapped by later magmas, possibly because the volume of crust extracted and stabilised was too small to influence (asthenospheric) mantle isotopic evolution. Growth of continental crust through pulsed emplacement of juvenile (chondritic mantle-derived) melts, into and onto the existing cratonic nucleus, however, involved formation of complementary depleted subcontinental lithospheric mantle since the early Archaean, indicative of strongly coupled evolutionary histories of both reservoirs, with limited evidence for recycling and lateral accretion of arc-related crustal blocks until 3.35 Ga.
Annual Review of Earth and Planetary Sciences, Vol. 45, pp. 169-198.
Mantle
tectonics
Abstract: The record of the continental lithosphere is patchy and incomplete; no known rock is older than 4.02 Ga, and less than 5% of the rocks preserved are older than 3 Ga. In addition, there is no recognizable mantle lithosphere from before 3 Ga. We infer that there was lithosphere before 3 Ga and that ?3 Ga marks the stabilization of blocks of continental lithosphere that have since survived. This was linked to plate tectonics emerging as the dominant tectonic regime in response to thermal cooling, the development of a more rigid lithosphere, and the recycling of water, which may in turn have facilitated plate tectonics. A number of models, using different approaches, suggest that at 3 Ga the volume of continental crust was ?70% of its present day volume and that this may be a minimum value. The continental crust before 3 Ga was on average more mafic than that generated subsequently, and this pre-3 Ga mafic new crust had fractionated Lu/Hf and Sm/Nd ratios as inferred for the sources of tonalite-trondhjemite-granodiorite and later granites. The more intermediate composition of new crust generated since 3 Ga is indicated by its higher Rb/Sr ratios. This change in composition was associated with an increase in crustal thickness, which resulted in more emergent crust available for weathering and erosion. This in turn led to an increase in the Sr isotope ratios of seawater and in the drawdown of CO2. Since 3 Ga, the preserved record of the continental crust is marked by global cycles of peaks and troughs of U-Pb crystallization ages, with the peaks of ages appearing to match periods of supercontinent assembly. There is increasing evidence that the peaks of ages represent enhanced preservation of magmatic rocks in periods leading up to and including continental collision in the assembly of supercontinents. These are times of increased crustal growth because more of the crust that is generated is retained within the crust. The rates of generation of continental crust and mantle lithosphere may have remained relatively constant at least since 3 Ga, yet the rates of destruction of continental crust have changed with time. Only relatively small volumes of rock are preserved from before 3 Ga, and so it remains difficult to establish which of these are representative of global processes and the extent to which the rock record before 3 Ga is distorted by particular biases.
Annual Review of Earth and Planetary Sciences, Vol. 45, pp. 169-198.
Mantle
Geochronology
Abstract: The record of the continental lithosphere is patchy and incomplete; no known rock is older than 4.02 Ga, and less than 5% of the rocks preserved are older than 3 Ga. In addition, there is no recognizable mantle lithosphere from before 3 Ga. We infer that there was lithosphere before 3 Ga and that ?3 Ga marks the stabilization of blocks of continental lithosphere that have since survived. This was linked to plate tectonics emerging as the dominant tectonic regime in response to thermal cooling, the development of a more rigid lithosphere, and the recycling of water, which may in turn have facilitated plate tectonics. A number of models, using different approaches, suggest that at 3 Ga the volume of continental crust was ?70% of its present-day volume and that this may be a minimum value. The continental crust before 3 Ga was on average more mafic than that generated subsequently, and this pre-3 Ga mafic new crust had fractionated Lu/Hf and Sm/Nd ratios as inferred for the sources of tonalite-trondhjemite-granodiorite and later granites. The more intermediate composition of new crust generated since 3 Ga is indicated by its higher Rb/Sr ratios. This change in composition was associated with an increase in crustal thickness, which resulted in more emergent crust available for weathering and erosion. This in turn led to an increase in the Sr isotope ratios of seawater and in the drawdown of CO2. Since 3 Ga, the preserved record of the continental crust is marked by global cycles of peaks and troughs of U-Pb crystallization ages, with the peaks of ages appearing to match periods of supercontinent assembly. There is increasing evidence that the peaks of ages represent enhanced preservation of magmatic rocks in periods leading up to and including continental collision in the assembly of supercontinents. These are times of increased crustal growth because more of the crust that is generated is retained within the crust. The rates of generation of continental crust and mantle lithosphere may have remained relatively constant at least since 3 Ga, yet the rates of destruction of continental crust have changed with time. Only relatively small volumes of rock are preserved from before 3 Ga, and so it remains difficult to establish which of these are representative of global processes and the extent to which the rock record before 3 Ga is distorted by particular biases.
Abstract: Thermal events and metasomatic processes have influenced the Kaapvaal craton in South Africa. High-density fluids (HDFs) trapped as microinclusions in diamond are main metasomatic agents which provide an insight to these processes in the Earth's mantle. Here we present data for 15 fibrous, HDF-bearing diamonds from the Voorspoed mine, South Africa, reflecting multiple diamond-forming events in a cooling lithosphere. Analyzed by FTIR and EPMA, the Voorspoed fibrous diamonds reveal three populations that differ in their nitrogen aggregation and HDF composition. A silicic?carbonatitic group containing 11-30% B-centers, a saline group containing 5-16% B-centers, and a single high-Mg carbonatitic diamond with 0% B-centers. The distinct nitrogen aggregation of the fibrous diamond groups in Voorspoed and the lack of clear major element evolutionary trends for each HDF type or intermediate compositions between the different types suggest different time-temperature formation histories. Thermobarometry of mineral inclusions in non-fibrous monocrystalline Voorspoed diamonds (Viljoen et al., 2018) indicates that the Voorspoed lithosphere cooled by 100-200 °C since their host diamonds crystallized at high initial temperatures. High temperatures in Voorspoed lithosphere can be correlated with the eruption of the Ventersdorp flood basalts at the central Kaapvaal (ca. 2.7 Ga) or the Bushveld complex (ca. 2.06 Ga), and cooling rates of the lithosphere provide a time frame for a cooling process that originated ~2-3 Ga. Combining these data with the nitrogen aggregation systematics of fibrous and monocrystalline Voorspoed diamonds, we suggest that most Voorspoed diamonds formed during 4 metasomatic events: the oldest one recorded took place between 2 and 3 Gyr as a result of a major thermal perturbation, whereas the following three occurred between 200 and 600 Myr, 30-90 and < 30 Myr before kimberlite eruption in a cooling lithosphere. An even older (or deeper) event is hinted by a few diamonds where all nitrogen is in B-centers. The sequence of events implied by Voorspoed HDF compositional and nitrogen aggregation differences show affinities with other occurrences in South Africa (e.g. Kimberley, Finsch and Koffiefontein) and may reflect thermal and lithological variation between the central and southwest Kaapvaal lithosphere.
Abstract: Incorporation of hydrogen into metamorphic olivine during dehydration reactions in the subducting oceanic lithosphere provides a mechanism to replenish the deep mantle with water. Fourier transform infrared spectroscopy of metamorphic olivines formed at 2.5 GPa and 550 °C through the reaction antigorite + brucite = olivine + chlorite + water shows water contents between 100 and 140 ppm H2O associated exclusively with silicon vacancies, similar to the highest values found in peridotite xenoliths. Brucite involvement in the olivine-forming reaction ensures H2O saturation and a low Si activity, favoring hydrogen incorporation into Si vacancies. The mapped water distribution in olivine is consistent with growth zoning and there is no evidence of water gain or loss. Thus, even for metamorphic timescales of several million years at 550 °C, no ionic diffusion modification is observed, in agreement with recent experimental findings. Metamorphic olivines formed by this dehydration reaction may contribute considerable amounts of water to the deep water cycle. Additionally, olivine with abundant H in Si vacancies are expected to be rheologically weaker than anyhdrous mantle olivine, and might provide a weak interface between slabs and mantle wedges in subduction zones at conditions beyond the stability of hydrous phases.
Lower crustal xenoliths from Jurassic kimberlite diatremes, Upper Michigan USA: evidence for Proterozoic orogenesis and plume magmatism in the lower crust of the southern Superior Province.
Petrology and geochemistry of xenolith bearing alkalic basalts from The geronimo Volcanic field, southeast Arizona, evidence for polybaric fractionation and implicat
Mantle metasomatism and alkaline magmatism, edited E. Mullen Morris and, No. 215, pp. 347-370
Lower crustal xenoliths from Jurassic kimberlite diatremes, Upper Michigan USA: evidence for Proterozoic orogenesis and plume magmatism in the lower crust of the southern Superior Province.
Geological Society of America Annual Meeting, Vol. 50, 4, 1p. Abstract
United States, Kansas
kimberlite
Abstract: The Critical Zone is the realm where rocks meet life. This study examines the physicochemical interactions that occur when interbedded limestone-shale systems and kimberlitc eruptive materials weather to form soils. Fast weathering with extensive soil loss has been a major environmental concern in the Flint Hills. Knowledge of soil formation processes, rates of formation and loss and understanding how these processes differ in different systems are critical for managing soil as a resource. The kimberlites of Riley County, KS, are CO2-rich igneous rocks that are high in Mg and Fe; they are compositionally distinct from the Paleozoic limestones and shales found throughout the rest of the region. Bulk composition and mineralogy of the soils overlying these different bedrock types have been analyzed using X-Ray Fluorescence (XRF), X-Ray diffraction of <2mm soil fraction and <2µm soil clay fraction, bulk elemental extraction, and particle size analyses. Results show that the kimberlitic soils have higher concentrations of Fe, Mg, Ca, K and some trace elements (e.g. Ti, Ni, Cu). The weathering products differ mineralogically as well, e.g. lizardite is abundant in kimberlitic soils and absent from the limestone terrane. As a result, kimberlite-sourced soils have significantly different physical properties than the thin limestone-sourced soils surrounding them. Particle size analysis shows that the limestone-shale soils have a higher proportion of silt-sized particles whereas the kimberlitic soils have more clay (10.55% vs. 8.06%) and significantly more sand (36.12% vs. 14.83%). Mineralogy was determined for all <2mm fractions and for some <2µm soil clay fraction to understand the association and mobility of these major and trace elements in the respective soils. Interestingly some of the similarities between the kimberlite and limestone-shale soils suggests that loess/wind-blown sediment is making a significant contribution to the soil profile. Kimberlite-sourced and limestone-shale-sourced soils produce different weathering products and could potentially have agricultural significance in terms of ionic and nutrient mobility.
Geological Society of London Special Publication: Magmatic Rifting and Active Volcanism, Vol. 420, pp. 11-30.
Africa
Global finite element model
Abstract: Continental rifting has a fundamental role in the tectonic behaviour of the Earth, shaping the surface we live on. Although there is not yet a consensus about the dominant mechanism for rifting, there is a general agreement that the stresses required to rift the continental lithosphere are not readily available. Here we use a global finite element model of the lithosphere to calculate the stresses acting on Africa. We consider the stresses induced by mantle flow, crustal structure and topography in two types of models: one in which flow is exclusively driven by the subducting slabs and one in which it is derived from a shear wave tomographic model. The latter predicts much larger stresses and a more realistic dynamic topography. It is therefore clear that the mantle structure beneath Africa plays a key part in providing the radial and horizontal tractions, dynamic topography and gravitational potential energy necessary for rifting. Nevertheless, the total available stress (c. 100 MPa) is much less than that needed to break thick, cold continental lithosphere. Instead, we appeal to a model of magma-assisted rifting along pre-existing weaknesses, where the strain is localized in a narrow axial region and the strength of the plate is reduced significantly. Mounting geological and geophysical observations support such a model.
Geological Society of London Special Publication: Continent formation through time., No. 389, pp. 41-67.
Canada, Ontario, Quebec
Geotectonics
Abstract: Hudson Bay Lithospheric Experiment (HuBLE) was designed to understand the processes that formed Laurentia and the Hudson Bay basin within it. Receiver function analysis shows that Archaean terranes display structurally simple, uniform thickness, felsic crust. Beneath the Palaeoproterozoic Trans-Hudson Orogen (THO), thicker, more complex crust is interpreted as evidence for a secular evolution in crustal formation from non-plate-tectonic in the Palaeoarchaean to fully developed plate tectonics by the Palaeoproterozoic. Corroborating this hypothesis, anisotropy studies reveal 1.8 Ga plate-scale THO-age fabrics. Seismic tomography shows that the Proterozoic mantle has lower wavespeeds than surrounding Archaean blocks; the Laurentian keel thus formed partly in post-Archaean times. A mantle transition zone study indicates ‘normal’ temperatures beneath the Laurentian keel, so any cold mantle down-welling associated with the regional free-air gravity anomaly is probably confined to the upper mantle. Focal mechanisms from earthquakes indicate that present-day crustal stresses are influenced by glacial rebound and pre-existing faults. Ambient-noise tomography reveals a low-velocity anomaly, coincident with a previously inferred zone of crustal stretching, eliminating eclogitization of lower crustal rocks as a basin formation mechanism. Hudson Bay is an ephemeral feature, caused principally by incomplete glacial rebound. Plate stretching is the primary mechanism responsible for the formation of the basin itself.
Earth and Planetary Science Letters, Vol. 465, pp. 155-167.
Mantle
Subduction
Abstract: Subduction is integral to mantle convection and plate tectonics, yet the role of the subslab mantle in this process is poorly understood. Some propose that decoupling from the slab permits widespread trench parallel flow in the subslab mantle, although the geodynamical feasibility of this has been questioned. Here, we use the source-side shear wave splitting technique to probe anisotropy beneath subducting slabs, enabling us to test petrofabric models and constrain the geometry of mantle fow. Our global dataset contains 6369 high quality measurements - spanning ?40,000?km?40,000?km of subduction zone trenches - over the complete range of available source depths (4 to 687?km) - and a large range of angles in the slab reference frame. We find that anisotropy in the subslab mantle is well characterised by tilted transverse isotropy with a slow-symmetry-axis pointing normal to the plane of the slab. This appears incompatible with purely trench-parallel flow models. On the other hand it is compatible with the idea that the asthenosphere is tilted and entrained during subduction. Trench parallel measurements are most commonly associated with shallow events (source depth <50?km<50?km) - suggesting a separate region of anisotropy in the lithospheric slab. This may correspond to the shape preferred orientation of cracks, fractures, and faults opened by slab bending. Meanwhile the deepest events probe the upper lower mantle where splitting is found to be consistent with deformed bridgmanite.
Geological Society, London Magmatic Rifting and Active Volcanism, Eds. Wright, T.J., Ayele, A., Ferguson, D.J., Kidane, T., Vye-Brown, X. publ. 2016, SP 420, pp. 11-30. from http://sp.lyell collection.org
Africa
tectonics, geodynamics
Abstract: Continental rifting has a fundamental role in the tectonic behaviour of the Earth, shaping the surface we live on. Although there is not yet a consensus about the dominant mechanism for rifting, there is a general agreement that the stresses required to rift the continental lithosphere are not readily available. Here we use a global finite element model of the lithosphere to calculate the stresses acting on Africa. We consider the stresses induced by mantle flow, crustal structure and topography in two types of models: one in which flow is exclusively driven by the subducting slabs and one in which it is derived from a shear wave tomographic model. The latter predicts much larger stresses and a more realistic dynamic topography. It is therefore clear that the mantle structure beneath Africa plays a key part in providing the radial and horizontal tractions, dynamic topography and gravitational potential energy necessary for rifting. Nevertheless, the total available stress (c. 100 MPa) is much less than that needed to break thick, cold continental lithosphere. Instead, we appeal to a model of magma-assisted rifting along pre-existing weaknesses, where the strain is localized in a narrow axial region and the strength of the plate is reduced significantly. Mounting geological and geophysical observations support such a model.
GSL SP 420 ( Lyell release May 11, 2020), Vol. 420, pp. 11-30. pdf
Africa
Tectonics
Abstract: Continental rifting has a fundamental role in the tectonic behaviour of the Earth, shaping the surface we live on. Although there is not yet a consensus about the dominant mechanism for rifting, there is a general agreement that the stresses required to rift the continental lithosphere are not readily available. Here we use a global finite element model of the lithosphere to calculate the stresses acting on Africa. We consider the stresses induced by mantle flow, crustal structure and topography in two types of models: one in which flow is exclusively driven by the subducting slabs and one in which it is derived from a shear wave tomographic model. The latter predicts much larger stresses and a more realistic dynamic topography. It is therefore clear that the mantle structure beneath Africa plays a key part in providing the radial and horizontal tractions, dynamic topography and gravitational potential energy necessary for rifting. Nevertheless, the total available stress (c. 100 MPa) is much less than that needed to break thick, cold continental lithosphere. Instead, we appeal to a model of magma-assisted rifting along pre-existing weaknesses, where the strain is localized in a narrow axial region and the strength of the plate is reduced significantly. Mounting geological and geophysical observations support such a model.
Abstract: There is much discussion of the timing of the onset of plate tectonics, yet there is increasing evidence that magma types similar to those from recent within plate and subduction related settings were generated in different areas at broadly similar times in the early Archaean. It may therefore be helpful to consider when plate tectonics became the dominant mechanism associated with the generation of continental crust, rather than just when it started. To do this we discuss the geochemical and mechanical characteristics of the lithosphere in the search to discern differences between Early Archaean and younger tectonic environments. Seismic tomography allows increasingly detailed mapping of the lithosphere, and it provides some evidence that the degree of anisotropy is different in different Archaean terrains. Structural styles also appear to vary from basin and swell, or vertical tectonics, as in the Australia Pilbara and southern Africa, to those with more strongly developed regional fabrics and greater seismic anisotropy, as in North America. These terrains tend to be characterized by inferred within-plate and subduction-related magmatism respectively, and we consider possible links between the degree of crustal and mantle anisotropy and the nature of the magmatic record. At least in some areas, terrains with stronger regional fabrics may be younger than those in which such fabrics are less well developed. A model is developed for the generation and stabilization of continental lithosphere in the Archaean. It seeks to reconcile evidence for hot shallow melting with melt fractions up to 40% to generate residual peridotites now preserved as mantle xenoliths, and the lower degrees of melting required to generate the mafic sources of TTGs (fractionated Lu/Hf and Sm/Nd, and perhaps not Rb/Sr).
Giuliani, A., Kamenetsky, V.S., Kendrick, M.A., Phillips, D., Wyatt, B.A., Maas, R.
Oxide, sulphide and carbonate minerals in a mantle polymict breccia: metasomatism by proto-kimberlite magmas, and relationship to the kimberlite megacrystic suite.
Abstract: The extent to which water and halogens in Earth’s mantle have primordial origins, or are dominated by seawater-derived components introduced by subduction is debated. About 90% of non-radiogenic xenon in the Earth’s mantle has a subducted atmospheric origin, but the degree to which atmospheric gases and other seawater components are coupled during subduction is unclear. Here we present the concentrations of water and halogens in samples of magmatic glasses collected from mid-ocean ridges and ocean islands globally. We show that water and halogen enrichment is unexpectedly associated with trace element signatures characteristic of dehydrated oceanic crust, and that the most incompatible halogens have relatively uniform abundance ratios that are different from primitive mantle values. Taken together, these results imply that Earth’s mantle is highly processed and that most of its water and halogens were introduced by the subduction of serpentinized lithospheric mantle associated with dehydrated oceanic crust.
Earth and Planetary Science Letters, Vol. 401, pp. 132-147.
Africa, South Africa
metasomatism
Abstract: The Karoo igneous rocks (174-185 Ma) of southern Africa represent one of the largest continental flood basalt provinces on Earth. Available evidence indicates that Karoo magmas either originated in the asthenosphere and were extensively modified by interaction with the lithospheric mantle prior to emplacement in the upper crust; or were produced by partial melting of enriched mantle lithosphere. However, no direct evidence of interaction by Karoo melts (or their precursors) with lithospheric mantle rocks has yet been identified in the suites of mantle xenoliths sampled by post-Karoo kimberlites in southern Africa. Here we report U-Pb ages for lindsleyite-mathiasite (LIMA) titanate minerals (crichtonite series) from three metasomatised, phlogopite and clinopyroxene-rich peridotite xenoliths from the ?84 Ma Bultfontein kimberlite (Kimberley, South Africa), located in the southern part of the Karoo magmatic province. The LIMA minerals appear to have formed during metasomatism of the lithospheric mantle by fluids enriched in HFSE (Ti, Zr, Hf, Nb), LILE (K, Ba, Ca, Sr) and LREE. LIMA U-Pb elemental and isotopic compositions were measured in situ by LA-ICP-MS methods, and potential matrix effects were evaluated by solution-mode analysis of mineral separates. LIMA minerals from the three samples yielded apparent U-Pb ages of , and (). A single zircon grain extracted from the ?190 Ma LIMA-bearing sample produced a similar U-Pb age of , within uncertainty of the LIMA ages. These data provide the first robust evidence of fluid enrichment in the lithospheric mantle beneath the Kimberley region at ?180-190 Ma, and suggest causation of mantle metasomatism by Karoo melts or their precursor(s). The results further indicate that U-Pb dating of LIMA minerals provides a new, accurate tool for dating metasomatic events in the lithospheric mantle.
Geostandards and Geoanalytical Research, http://orchid.org/0000-0002-2701-4635 80p.
Asia, Sri Lanka
geochronology
Abstract: Here we document a detailed characterization of two zircon gemstones, GZ7 and GZ8. Both stones had the same mass at 19.2 carats (3.84 g) each; both came from placer deposits in the Ratnapura district, Sri Lanka. The U-Pb data are in both cases concordant within the uncertainties of decay constants and yield weighted mean ²??Pb/²³?U ages (95% confidence uncertainty) of 530.26 Ma ± 0.05 Ma (GZ7) and 543.92 Ma ± 0.06 Ma (GZ8). Neither GZ7 nor GZ8 have been subjected to any gem enhancement by heating. Structure?related parameters correspond well with the calculated alpha doses of 1.48 × 10¹? g?¹ (GZ7) and 2.53 × 10¹? g?¹ (GZ8), respectively, and the (U-Th)/He ages of 438 Ma ± 3 Ma (2s) for GZ7 and 426 Ma ± 9 Ma (2s) for GZ8 are typical of unheated zircon from Sri Lanka. The mean U concentrations are 680 ?g g?¹ (GZ7) and 1305 ?g g?¹ (GZ8). The two zircon samples are proposed as reference materials for SIMS (secondary ion mass spectrometry) U-Pb geochronology. In addition, GZ7 (Ti concentration 25.08 ?g g?¹ ± 0.18 ?g g?¹; 95% confidence uncertainty) may prove useful as reference material for Ti?in?zircon temperature estimates.
Kennedy at the Cape: a Professional Tour through Cape Colony,the Orange Free State, the Diamond Fields and Natal. a Section of Singing Around the World.
Edinburgh: Endiburgh Publishing Co., Or London: Simpkin, Marshall, 153P.
Earth and Planetary Science Letters, Vol. 431, pp. 225-235.
Australia
Geophysics - seismics - cratons
Abstract: A direct image of P-wave reflectivity in the lithosphere and asthenosphere beneath seismic stations is extracted from stacked autocorrelograms of continuous component records. The autocorrelograms emphasise near vertically travelling waves, so that multiples are more muted than in receiver function studies and it is possible to work at higher frequencies than for receiver functions. Across a wide range of geological environments in Australia, in the 0.5-4.0 Hz frequency band, distinct reflections are seen in the crust underlain by weaker reflectivity in the lithosphere and asthenosphere. The base of crustal reflectivity fits well with Moho estimates from other classes of information. Few mantle reflectors have been seen in conventional reflection profiling at frequencies above 10 Hz; the presence of reflections in the 0.5-4.0 Hz band suggests variations on vertical scales of a few hundred metres with amplitudes of the order of 1%. There are slight indications of a change of reflection character in the lower part of the lithosphere in the transition to the asthenosphere. At a few stations there is a very clear lamination at asthenospheric depth, as well as reflections from the base of the S wave low velocity zone. Reflection bands often occur at depths where discontinuities have been inferred from S wave receiver function work at the same station, but would not by themselves be distinctive of a mid-lithosphere discontinuity.
Geophysical Research Letters, Vol. 42, 10. pp. 3829-3846.
Australia
geophysics, seismic
Abstract: A new 3-D S wave speed model for the Australian region derived from multimode surface waves allows us to examine the nature of the lithosphere-asthenosphere transition (LAT) and its relation to radial anisotropy. In eastern Phanerozoic Australia the estimated depths of the LAT tie well with those from receiver functions. However, in the Archean and Proterozoic lithosphere in western and central Australia, the LAT derived from the surface wave model is generally much deeper than the discontinuities recognized from receiver functions and shows a smooth transition. There is significant radial anisotropy (SH?>?SV) in the upper lithosphere as well as in the LAT and the underlying asthenosphere. Strong anisotropy in the asthenosphere reflects the effects of present shear flow in the mantle beneath the continent. The lateral variation of lithospheric anisotropy correlates well with the suture zones between cratonic blocks, representing frozen anisotropy associated with the ancient tectonics of Australia.
Earth and Planetary Science Letters, Vol. 477, pp.
Mantle
geophysics - seismics
Abstract: We exploit conversions between P and S waves for large-scale, high-resolution imaging of the mantle transition zone beneath Northwest Pacific and the margin of Eastern Asia. We find pervasive reflectivity concentrated in two bands with apparent wave-speed reduction of ?2% to ?4% about 50 km thick at the top of the transition zone and 100 km thick at the bottom. This negative reflectivity associated with the scattered-waves at depth is interpreted jointly with larger-scale mantle tomographic images, and is shown to delineate the stagnant portions of the subducted Pacific plate in the transition zone, with largely positive shear-wave velocity contrasts. The upper reflectivity zone connects to broad low-velocity regions below major intra-plate volcanoes, whereas the lower zone coincides locally with the occurrence of deep-focus earthquakes along the East Asia margin. Similar reflectivity is found in Pacific Northwest of the USA. We demonstrate that the thermal signature of plates alone is not sufficient to explain such features. Alternative explanations for these reflective zones include kinetic effects on olivine phase transitions (meta-stability), compositional heterogeneities within and above stagnant plates, complex wave-propagation effects in the heterogeneous slab structure, or a combination of such factors. We speculate that part of the negative reflectivity is the signature of compositional heterogeneities, as revealed by numerous other studies of seismic scattering throughout the mantle, and that such features could be widespread across the globe.
Abstract: Constraining the origin and history of very ancient detrital zircons has unique potential for furthering our knowledge of Earth's very early crust and Hadean geodynamics. Previous applications of the Ti-in-zircon thermometer to >4 Ga zircons have identified a population with relatively low crystallization temperatures (Tzirxtln) of ?685 °C. This could possibly indicate wet minimum-melting conditions producing granitic melts, implying very different Hadean terrestrial geology from that of other rocky planets. Here we report the first comprehensive ion microprobe study of zircons from a transect through the differentiated Sudbury impact melt sheet (Ontario, Canada). The new zircon Ti results and corresponding Tzirxtln fully overlap with those of the Hadean zircon population. Previous studies that measured Ti in impact melt sheet zircons did not find this wide range because they analyzed samples only from a restricted portion of the melt sheet and because they used laser ablation analyses that can overestimate true Ti content. It is important to note that internal differentiation of the impact melt is likely a prerequisite for the observed low Tzirxtln in zircons from the most evolved rocks. On Earth, melt sheet differentiation is strongest in subaqueous impact basins. Thus, not all Hadean detrital zircon with low Ti necessarily formed during melting at plate boundaries, but at least some could also have crystallized in melt sheets caused by intense meteorite bombardment of the early, hydrosphere-covered protocrust.
Kent, A.J.R., Stolper, E.M., Francis, D., Woodhead, J., Frei, R., Eiler, J.
Mantle heterogeneity during the formation of the North Atlantic igneous province: constraints from trace element and Sr Nd Os O isotope - Baffin Island picrites
Geochemistry, Geophysics, Geosystems: G3, Vol. 5, pp. Q11004 10.1029/2004GC000743
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 265-288.
Mantle
Supercontinents
Abstract: Mechanisms that can explain the Mesozoic motion of Pangaea in a palaeomagnetic mantle reference frame may also be able to explain its breakup. Calculations indicate that Pangaea moved along a non-rigid path in the mantle frame between the late Triassic and early Jurassic. The breakup of Pangaea may have happened as a response to this non-rigid motion. Tectonic forces applied to the margins of Pangaea as a consequence of subduction at its peripheries can explain both the motion and deformation of Pangaea with a single mechanism. In contrast, mantle forces applied to the base of Pangaea appear to be inconsistent with the kinematic constraints and do not explain the change in supercontinent motion that accompanied the breakup event. Top-down plate tectonics are inferred to have caused the breakup of Pangaea. Strong coupling between the mantle and lithosphere may not have been the case during the Phanerozoic eon when the Pangaean supercontinent formed and subsequently dispersed.
Earth and Planteray Science Letters, Vol. 488, pp. 134-143.
Mantle
nitrogen
Abstract: The solubility of nitrogen in the major minerals of the Earth's transition zone and lower mantle (wadsleyite, ringwoodite, bridgmanite, and Ca-silicate perovskite) coexisting with a reduced, nitrogen-rich fluid phase was measured. Experiments were carried out in multi-anvil presses at 14 to 24 GPa and 1100 to 1800?°C close to the Fe-FeO buffer. Starting materials were enriched in 15N and the nitrogen concentrations in run products were measured by secondary ion mass spectrometry. Observed nitrogen (15N) solubilities in wadsleyite and ringwoodite typically range from 10 to 250 ?g/g and strongly increase with temperature. Nitrogen solubility in bridgmanite is about 20 ?g/g, while Ca-silicate perovskite incorporates about 30 ?g/g under comparable conditions. Partition coefficients of nitrogen derived from coexisting phases are DNwadsleyite/olivine = 5.1 ± 2.1, DNringwoodite/wadsleyite = 0.49 ± 0.29, and DNbridgmanite/ringwoodite = 0.24 . Nitrogen solubility in the solid, iron-rich metal phase coexisting with the silicates was also measured and reached a maximum of nearly 1 wt.% 15N at 23 GPa and 1400?°C. These data yield a partition coefficient of nitrogen between iron metal and bridgmanite of DNmetal/bridgmanite???98, implying that in a lower mantle containing about 1% of iron metal, about half of the nitrogen still resides in the silicates. The high nitrogen solubility in wadsleyite and ringwoodite may be responsible for the low nitrogen concentrations often observed in ultradeep diamonds from the transition zone. Overall, the solubility data suggest that the transition zone and the lower mantle have the capacity to store at least 33 times the mass of nitrogen presently residing in the atmosphere. By combining the nitrogen solubility data in minerals with data on nitrogen solubility in silicate melts, mineral/melt partition coefficients of nitrogen can be estimated, from which the behavior of nitrogen during magma ocean crystallization can be modeled. Such models show that if the magma ocean coexisted with a primordial atmosphere having a nitrogen partial pressure of just a few bars, several times the current atmospheric mass of nitrogen must have been trapped in the deep mantle. It is therefore plausible that the apparent depletion of nitrogen relative to other volatiles in the near-surface reservoirs reflects the storage of a larger reservoir of nitrogen in the solid Earth. Dynamic exchange between these reservoirs may have induced major fluctuations of bulk atmospheric pressure over Earth's history.
Journal of Structual Geology, Vol. 115, pp. 284-296.
Mantle
subduction
Abstract: During the last decades, processes taking place in subduction zones have been a topic of extensive debate. There are many models on a tectonic scale, but knowledge of deformation at microscopic levels is essential for an understanding of the processes involved. Crystallographic preferred orientation (CPO) investigations of minerals in eclogites yield the possibility to study deformation in the crustal part of subducted oceanic lithosphere, as well as subducted continental units containing basic intrusions, which are frequently exhumed during continental collision. From CPO data of omphacite and garnet, as well as other constituent minerals in eclogites, conclusions on stress and strain at depth in currently active subduction zones can be drawn, as the pressure-temperature and strain path of the now exhumed rocks can be unraveled. This contribution provides an overview of CPO studies of eclogites concerning slip systems, deformation, strain and other possible CPO forming mechanisms in all major constituent mineral phases in eclogites and the implications of these microstructural data on subduction zone processes are discussed. Nevertheless, there are still many open questions and future research is essential.
Geochemistry International, Vol. 55, 4, pp. 360-366.
Russia, Siberia
diamondoid
Abstract: A broad suite of geological materials were studied a using a handheld laser-induced breakdown spectroscopy (LIBS) instrument. Because LIBS is simultaneously sensitive to all elements, the full broadband emission spectrum recorded from a single laser shot provides a ‘chemical fingerprint’ of any material - solid, liquid or gas. The distinguishing chemical characteristics of the samples analysed were identified through principal component analysis (PCA), which demonstrates how this technique for statistical analysis can be used to identify spectral differences between similar sample types based on minor and trace constituents. Partial least squares discriminant analysis (PLSDA) was used to distinguish and classify the materials, with excellent discrimination achieved for all sample types. This study illustrates through four selected examples involving carbonate minerals and rocks, the oxide mineral pair columbite-tantalite, the silicate mineral garnet and native gold how portable, handheld LIBS analysers can be used as a tool for real-time chemical analysis under simulated field conditions for element or mineral identification plus such applications as stratigraphic correlation, provenance determination and natural resources exploration.
Earth & Environment Communications, 10.1038/s43247-021-00145-3 16p. Pdf
United States, Hawaii
magmatism
Abstract: Volcanoes represent one of the largest natural sources of metals to the Earth’s surface. Emissions of these metals can have important impacts on the biosphere as pollutants or nutrients. Here we use ground- and drone-based direct measurements to compare the gas and particulate chemistry of the magmatic and lava-seawater interaction (laze) plumes from the 2018 eruption of K?lauea, Hawai’i. We find that the magmatic plume contains abundant volatile metals and metalloids whereas the laze plume is further enriched in copper and seawater components, like chlorine, with volatile metals also elevated above seawater concentrations. Speciation modelling of magmatic gas mixtures highlights the importance of the S2? ligand in highly volatile metal/metalloid degassing at the magmatic vent. In contrast, volatile metal enrichments in the laze plume can be explained by affinity for chloride complexation during late-stage degassing of distal lavas, which is potentially facilitated by the HCl gas formed as seawater boils.
Proterozoic and Paleozoic a type granite suites in Labrador andNewfoundland: samarium-neodymium (Sm-Nd) evidence for the importance of juvenile sources.
Geological Association of Canada (GAC) Abstract Volume, Vol. 19, p.
Abstract: Estimates of the volume of the earliest crust based on zircon ages and radiogenic isotopes remain equivocal. Stable isotope systems, such as molybdenum, have the potential to provide further constraints but remain underused due to the lack of complementarity between mantle and crustal reservoirs. Here we present molybdenum isotope data for Archaean komatiites and Phanerozoic komatiites and picrites and demonstrate that their mantle sources all possess subchondritic signatures complementary to the superchondritic continental crust. These results confirm that the present-day degree of mantle depletion was achieved by 3.5 billion years ago and that Earth has been in a steady state with respect to molybdenum recycling. Mass balance modelling shows that this early mantle depletion requires the extraction of a far greater volume of mafic-dominated protocrust than previously thought, more than twice the volume of the continental crust today, implying rapid crustal growth and destruction in the first billion years of Earth’s history.
